Morphology and viscoelasticity of bilayer aqueous colloids of low-molecular and macromolecular amphiphiles

Aqueous colloids of didodecyldimethylammonium bromide (DMA), allylbis[2-(dodecanoyloxycarbonyl)ethyl]methylammonium bromide (ADM) and polymer of ADM (PADM) were employed for morphological and rheological studies.The polymerization was carried out by irradiation of UV-light for the monomeric colloid. Weight average molecular weight of the polymer is about 16.3×10⁴.Diameters of vesicles at critical micelle (aggregate) concentration were 8 10 nm in the aqueous colloids of DMA, ADM and PADM. Various bilayer textures which were dependent upon the concentration and the temperature could be found in these amphiphiles. In particular, the bilayer textures were full in variety in the PADM system.Rheological properties of the aqueous colloids of these amphiphiles depended strongly upon the bilayer textures.     

Micelle structure in isotropic aqueous colloids of a poly(oxyethylene) amphiphile C12E8

Micelle structure in aqueous colloids in the isotropic liquid phase (L₁) of a nonionic amphipile (n-dodecyl octa(oxyethylene glycol) monoether (C₁₂E₈) has been investigated as a function of concentration and temperature using light scattering (LS), viscometry, NMR, and small-angle X-ray scattering (SAXS).The spherical micelles, having a radius of 28–31 Å, remain in a wide concentration range from very dilute to ca. 42 wt %. The micelle size increases sligthly with increasing temperature in the range of 25–60 °C. In the concentrated colloids, the spherical micelles are likely to be arranged in a certain ordered structure. Even at such a high concentration as 30 wt %, the isotropic colloid shows Newtonian flow. This suggests that interaction between micelles in the ordered structure is very weak and the structure is very fragile. Moreover, coexistence of the isotropic phase and the ordered structure in L₁ phase is discussed.     

Internal and interfacial structure of small vesicle in aqueous colloid of didodecyldimethylammonium bromide

The vesicle structure and interfacial structure of a two-chain amphiphile didodecyldimethylammonium bromide (DMA) in aqueous colloid have been studied by small-angle x-ray scattering. The radius of the DMA small vesicle is ca. 64 Å, and the thickness of the bilayer, which is the surface layer of the vesicle, is ca. 41 Å. The small vesicle has a core space at the center, whose radius is ca. 23 Å. The specific inner surface of the small vesicle has also been calculated and the surface area of the vesicle has been estimated to be five times larger than that of the smooth sphere.     

The flexibility of rodlike micelles in aqueous solutions and the crossover concentrations among dilute,semidilute, and concentrated regimes

A flexibility parameter, the persistence length, has been evaluated from the radii of gyration and the contour lengths for rodlike micelles of heptaoxyethylene alkyl ethers (C _n E₇,n=12, 14, 16) and tetradecyldimethylammonium chloride (C₁₄DAC) and bromide (C₁₄DAB) at the observed crossover concentrations between dilute and semidilute regimes. The persistence length range is 43–73 nm, except for C₁₂E₇, for which it is 32 nm. The crossover concentrations between dilute and semidilute regimes for the semiflexible rodlike micelles calculated according to Ying and Chu as a function of the molecular weight, the contour length, and the persistence length are consistent with the observed values. The crossover concentration between semidilute and concentrated regimes was, on the other hand, calculated by using the same micelle parameters, including the value of thickness of cross-section of the rodlike micelles. The obtained values are at variance with the observed values. This means that rodlike micelles in semidilute and concentrated solutions might differ in size and/or flexibility from those in dilute solution.     

Heat of micelle formation: Effect of counterions with concentrated,diffused, and separated electric charges

Heats of micelle formation were estimated from calorimetric measurements of anionic surfactants to see if there is any effect of the electrical charge of the counterion on micelle formation from the viewpoint of enthalpy change. The cationic counterions used are Na⁺ and Cu²⁺ for the concentrated electric charge, MV²⁺ for the diffused and 1,1-(1,)-alkanediyl)bispyridiniumions n=2, 4, 6, 8, 10, 12, 14 for the separated. The heat of micelle formation was obtained by subtracting an enthalpy change of dissolution of surfactant solid precipitated below the micelle temperature range (MTR or Krafft point) from a heat of complete dissolution of the precipitated surfactant solid around the MTR. The heats thus evaluated were found to be much more temperature-dependent than counterion-dependent. They were compared with the enthalpy change calculated from the CMC change with temperature, and the big difference between them was discussed from a thermodynamic point of view.     

The structure of water and methanol adsorbed on silica gel by FT-NIR spectroscopy

The NIR adsorption spectra were analyzed quantitatively on the fundamental, combination and first overtone region of OH vibrations of silanol groups, water and methanol adsorbed on mesoporous silica gels. Adsorbed methanol constitutes first layer of about 3 molecules/um^–2 and second layer, the structure of which is similar to that of bulk methanol liquid. Adsorbed water consists of a first layer of about 3 molecules/nm^–2, the second layer of about 9 molecules/nm^–2 and the third layer has a structure similar to the that of bulk water. The molecular configuration at the interface is discussed.     

Water vapor adsorption and capillary reactions of silicates

States of disperse silicate systems classified according to their fundamental morphological types were represented by a ternary diagram. Water vapor equilibria of various silicate samples were investigated by energy levels, by equivalent pore number of potential bands determined from adsorption potential curves. The silicate adsorbents were characterized by adsorption energy, equipotential surface area and specific capillary. Electrical properties of adsorbents depending on their water contents were examined. Changes of adsorption properties of mechanical, thermal and by ion exchange treated silicates were observed. Electrical properties of adsorbents depending on their humidity were examined. Capillary reactions were observed causing irreversible adsorption-desorption cycles.     

Microstructure and lateral diffusion in monolayers of polymerizable amphiphiles

Lipid analogue amphiphilic molecules containing polymerizable units were investigated in monolayers at the air/water interface by using film balance measurements, fluorescence microscopy, and photobleaching techniques. The polymerizable groups (diene-, diyne-, and methacrylate units) were introduced into the hydrophobic alkyl chains or into the polar head of the amphiphilic molecules.In the case of the diene- and diyne-containing compounds the polymerizable units are incorporated into the hydrophobic alkyl chains, enabling them to form a two-dimensional network. Due to the free chain flexibility of the monomers the lateral mobility was comparable to that of saturated lipid analogues and decreases upon polymerization proportionally to the dose of UV irradiation. In addition, fluid/solid phase transitions of compounds with polymerizable groups in the hydrophobic part tend to vanish during the formation of the polymers. However, the direct observation of the growth of polymeric crystalline domains can be followed by using diacetylene lipid analogues.In the case of the methacrylate derivatives the polymerizable unit was coupled to the polar part via a flexible spacer. For these systems the characteristics of the monomeric phase transition are retained after polymerization. However, it shows a significant, strong decrease of the in-plane mobility already in the fluid-expanded phase of the polymer. The quantitative measurements of the lateral diffusion in the monolayers can be correlated with fluorescence microscopic images of their structure.     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

The effect of water on the zeta potential of chromium dioxide in tetrahydrofuran

Experiments have been performed to determine the effect of water on dilute suspensions of CrO₂ in tetrahydrofuran (THF). The effect of water in the solvent as well as on the particle surface has been investigated using electrokinetic and dispersion stability measurements. Results of these investigations have shown that the zeta potential of dried CrO₂ (physisorbed water removed) in THF is positive and is dependent on the water content in THF. The zeta potential exhibits a maximum at about 1,800 ppm water. Good correlation also exists between the electrokinetic and dispersion stability measurements.     

Micellar properties of zwitterionic phosphobetaine amphiphiles in aqueous solution: Influence of the intercharge distance

Zwitterionic amphiphiles of the general formula H(CH₂)_y ⁺ N(CH₃)₂(CH₂)_n PO₂C₆H ₅ ^– , where the number of intercharge methylenesn is varied, were studied in dilute aqueous solution. Their critical micellar concentrations show a peculiar variation withn, first increasing asn varies from 1 to 4 and then slowly decreasing as methylenes are added up to 10. This behavior is interpreted as being the consequence of two opposite contributions. The first is the classical CMC lowering due to the increase of hydrophobic character with the total number of methylene groups in the surfactant molecule. The second contribution is the increase in the dipole moment of the zwitterionic headgroup withn, leading to stronger dipole-dipole repulsions between headgroups at the micellar surface. Experimental results suggest that the dipole moment does not increase linearly withn because of the polymethylene chain flexibility. This is supported by¹³C NMR relaxation experiments.     

Solutions of alkali soaps and water in fatty acids. XII. Correlations between the acid sodium octanoates in the isotropic liquidL 2-phase at water contents from 82% down to 10% and those in adjacent liquid crystalline phases

A close connection exists between the isotropic L₂-phase and the liquid crystalline lamellar D-phase. This connection is evidenced both with respect to similar compositions of their acid sodium octanoates and concerning the structure of the phases.The two-phase zone between these phases is very narrow, from 82 % down to about 55 % of water, it then widens slowly to about 40 % and thereafter very rapidly to 22 % of water; below the latter value it remains broad. The border of the L₂-phase is in the whole region from 82 % to 22 % of water located at molar ratios between octanoic acid and sodium octanoate of somewhat above 2.0; the border of the D-phase lies at the same values down to a water content of 40 %. The acid octanoate 1 NaC₈ 2 HC₈ x H₂O plays thus a considerable role in the phase transition all the way down to a water content of 22 %. As long as free bulk-water exists in both phases the structures in them remain alike; this similarity is greatest as long as the amount of bulk-water is so large that it suffices to form coherent domains. At contents of water below 40 %, that is after the disappearance of the bulk-water and when a decrease in the content of water begins to affect the hydration of the acid octanoates, the structural similarity between the phases disappears rapidly.     

Characteristics of rodlike micelles of cetyltrimethylammonium chloride in aqueous NaCl solutions: Their flexibility and the scaling laws in dilute and semidilute regimes

Static light scattering has been measured for aqueous NaCl solutions of cetyltrimethylammonium chloride (CTAC) at 25 °C. While spherical micelles are formed above the critical micelle concentration for 0–1.5 M NaCl solutions, rodlike micelles are formed at NaCl concentrations higher than 1.18 M.The aggregation number of rodlike micelles increases markedly with increasing NaCl concentration, and it is as large as 11400 in 4.0 M NaCl. Long rodlike micelles are semiflexible and behave like wormlike chains. Their contour length and persistence length have been calculated as 630 and 46.4 nm, respectively, in 4.0 M NaCl.Rodlike micelles overlap and entangle together to form a network in semidilute solutions above a threshold micelle concentration. The radius of gyration of the blob can be scaled for its molecular weight with the exponent, 0.55, coinciding with that for isolated rodlike micelles in dilute solutions. The scaling laws for the reciprocal envelope of light scattered in the semidilute regime and for the molecular weight and the radius of gyration of the blob are also discussed with reference to the micelle concentration.     

Mixed monolayers composed of PC/PS/Chol. Interaction with opioid molecules

The miscibility of phosphatidylserine, phosphatidylcholine, and cholesterol in monolayers were studied. The influence of sodium and calcium ions in this system was determined. The compression isotherms of mixed monolayers of the above cited three components spread on subphases containing opiate molecules are elucidated. Moreover, the penetration kinetics of opiate molecules in these mixed monolayers was also recorded. The results show that the presence of cholesterol always lowers the penetration of opioid molecules; this effect is weaken for meperidine, the most hydrophobic of the molecules assayed.Abreviations PS phosphatidylserine - PC phosphatidylcholine - PI phosphatidylinositol - Chol cholesterol     

The salt-induced sphere-rod transition of micelles of dodecylpyridinium iodide in aqueous NaI solutions

Static light scattering has been measured on aqueous NaI solutions of dodecylpyridinium iodide (DPI) over NaI concentrations from 0 to 0.05 M. Reduced intensity of scattered light increases with increasing DPI concentration above the critical micelle concentration. The Debye plot is generally a curve with an initially positive slope and with a weakly convex, upward curvature, when the NaI concentration ranges from 0 to 0.005 M. The molecular weight of the spherical micelle of DPI is 28400 in water, and it increases slightly with increasing NaI concentration. The initial slope decreases with increasing NaI concentration and changes from positive to negative across 0.007 M NaI, which is the threshold for the sphere-rod transition and where the micelle has a molecular weight of 34400. At NaI concentrations from 0.01 to 0.05 M, the Debye plot is a curve with an initially negative slope and with a convex, downward curvature. The magnitudes of slope and curvature are larger, and the rodlike micelles of DPI have larger molecular weight and stronger mutual interaction, as the NaI concentration increases. The linear double logarithmic relationship between molecular weight and ionic strength holds for spherical and rodlike micelles, respectively.     

The rheological properties of concentrated cetyltrimethylammonium bromide-salicylic acid solutions in water

Data on the rheological properties of the hexadecyl-trimethylammonium salicylate system (CTAB-SA) in water are reported. Three concentrations were used (0.1, 0.01, and 0.001 M). For the highest concentration, the effect of temperature on the rheology was studied in detail.The rheology of the 0.1 M CTAB-SA solution indicates a very uniform micellar size. By contrast with concentrated polymethyl methycrylate dispersions studied by the author, there was a strong divergence between the viscosity-shear rate and viscosity-frequency data, although the plateau low shear rate and frequency values agreed over a wide range of temperature. This effect could be explained by a shear rate dependent diffusion constant. The large temperature variation of the plateau viscosity and elasticity modulus values could be explained by a combination of micellar number concentration and flexibility changes as the temperature varies.At lower concentrations, the rheological data shows evidence of polydispersity in micellar size. Strong shear thickening and extensional viscosity effects are also evident, probably due to micellar overlap and cluster formation in strong shear fields and the alignment of the very long micelles in elongational flow. The shear thickening effects take some 200 s to relax (0.01 M solution). Recovery of the elasticity after shearing the 0.1 M solution is rapid (a few hundred milliseconds).     

Polymeric amphiphiles with hydrophilic main chain spacers: Studies in monolayers and Langmuir-Blodgett multilayers

A methacrylic lipid was polymerized to form an amphiphilic homopolymer and random copolymers with various levels of acrylic acid comonomers. The behavior of these polymeric lipids was investigated in monolayers at the air-water interface and in Langmuir-Blodgett multilayers on polymer foil supports. The acrylic acid acts as a hydrophilic spacer along the polymer backbone, and improves the ability of the polymer to self-organize into highly ordered monolayers and ultimately LB multilayers. It is shown that the quality and stability of the multilayers increase substantially with the increase in comonomer content.     

Catalase monolayers at the air/water interface I. Reversibilities and irreversibilities

/A-isotherms of catalase monolayers established at the air/water-interface are discussed quantitatively on the basis of molecular data: A relationship between a critical value of the surface pressure, the corresponding molecular area, and the molecular dimension of the molecules at the interface is proposed. It is shown that the unfolding of molecules at the water surface is pH-dependent. For each pH-value there is a distinct degree of unfolding; the molecules keep their globular state at neutral pH. Establishment at the surface of bulk solutions corresponding to globular and partly unfolded states, respectively, catalase molecules keep their original configuration on changing the pH-value of bulk-phase. The monolayers are confirmed to show reversibility with regard to lateral changes of state as well as irreversibility with respect to desorption of molecules.A model is proposed to explain the nature of the critical/A-value occurring in the/A-isotherms: on compression beyond _c, molecular segments are transferred from the surface into the bulkphase via a subsurface layer. From the experiments it is concluded that the surface pressure is determined, not only by the surface itself, but also by this subsurface layer.     

Interaction of opioid molecules with PS,PC and PS/PC monolayers

The interaction between opiate molecules and phosphatidylserine (PS) or phosphatidylcholine (PC) has been studied on compression isotherms and penetration kinetics. Phosphatidylcholine-opiate interactions are weak and similar in magnitude for all opiate molecules. On contrary, PS and PS/PC interact strongly and differently with opiate molecules. The differences in penetration are not directly related to the pKa or hydrophobicity of the molecules.     

Stability of spherical and rod-like micelles of ionic surfactants,in relation to their counterion binding and modes of hydration

Aqueous salt solutions of ionic surfactants in both spherical and rod-like micelles have been treated on the basis of a statistical thermodynamic theory, and the double logarithmic relationship between micelle molecular weight and ionic strength is derived for each micelle. Counterion binding on both micelles are assumed to occur specifically, and their degrees of dissociation are related to the slopes of the linear double logarithmic relations. It is found from the relationship observed for typical surfactants that the effective charge of spherical micelles is 29±4. The degree of dissociation of rod-like micelles of these surfactants is primarily determined by the counterion species, yielding values 0.8 for Na⁺, 0.4–0.6 for Cl^– and 0.2–0.3 for Br^–. Hydrophilic hydration of both micelles can be evaluated from the intercepts of the linear relations. Hydrophilic hydration acts repulsively in spherical micelles, while it is attractive or much less repulsive in rod-like micelles.