花状Zn-MOF衍生碳@MoS2复合材料制备及吸波性能

采用Zn-MOF(MOF为金属有机骨架)制备纳米多孔碳材料,通过自组装法将多孔碳与花状MoS₂结合,制备出具有规整有序结构的花状Zn-MOF衍生碳@MoS₂复合吸波材料。基于Zn-MOF衍生纳米多孔碳的高孔隙率、大比表面积,MoS₂的花状结构引起的电磁波多次反射和散射,以及MoS₂和Zn-MOF衍生碳之间存在的强极化效应、良好的阻抗匹配和协同作用,Zn-MOF衍生碳@MoS₂在频率为9.28 GHz时的最佳反射损耗达到-49.68 dB,表现出优异的电磁波吸收性能。     

二硫化钼纳米片/碳纳米纤维杂化材料的制备及其析氢性能

以碳纳米纤维（CNFs）作为负载基体和反应器采用静电纺丝技术和碳化工艺生长和调控二硫化钼（MoS₂）纳米片。通过改变前驱体溶液浓度来调控纳米片的形貌和结构,利用MoS₂纳米片的高催化活性和CNFs高比表面积、良好的稳定性以及高电导率的协同作用,研究不同形貌和结构的杂化纳米材料在电催化析氢方面的应用,探索杂化材料形貌与性能之间的潜在规律。运用多种分析测试技术对制备得到的纳米杂化材料进行表征,并对所制备的MoS₂/CNFs杂化材料的电催化析氢性能（HER）进行研究,研究表明近似皮芯结构的MoS₂/CNFs-10杂化材料的电催化析氢性能最好,初始析氢过电位在220 mV,Tafel斜率为110 mV·dec^-1。     

MoS2/Cd2SnO4复合材料的制备及其气敏性能

采用水热-煅烧法制备Cd₂SnO₄,之后通过超声混合法得到一系列MoS₂/Cd₂SnO₄复合材料。采用X射线衍射、扫描电子显微镜、X射线光电子能谱对Cd₂SnO₄和一系列MoS₂/Cd₂SnO₄复合材料进行结构和形貌的表征。研究了MoS₂掺杂量对于MoS₂/Cd₂SnO₄复合材料的气敏性能影响。实验结果表明,当MoS₂与Cd₂SnO₄的质量比为2.5%,MoS₂/Cd₂SnO₄复合材料制备的气敏元件在170 ℃时对浓度为100 μL·L^-1的甲醛气体的灵敏度为40.0,最低检测限为0.1 μL·L^-1。     

微波原位合成Ag NPs/MoS2复合材料及其电化学性能

二硫化钼纳米片（MoS₂）受到带电杂质、结构缺陷和易聚集等因素的影响，导致其电子转移性能下降，使其应用受限。将银纳米颗粒（Ag NPs）与少层MoS₂纳米片复合，可提升MoS₂纳米片的电化学性能。本研究创新性地采用微波还原法，使Ag NPs原位沉积于MoS₂，得到Ag NPs/MoS₂复合材料。结果表明，将Ag NPs/MoS₂复合材料修饰于丝网印刷电极（screen printed elec-trodes，SPE）后，测得的循环伏安（cyclic voltammetry，CV）曲线峰电流值为同浓度单一MoS₂修饰电极的1.8倍，方波伏安（square wave voltammetry，SWV）曲线峰电流值为单一MoS₂修饰电极的3.4倍，电化学阻抗谱（electrochemical impedance spectroscopy，EIS）的电子转移阻抗值（R_et）仅为167 Ω，相比MoS₂/SPE的R_et （320 Ω）显著减小，说明Ag NPs与MoS₂复合可显著增强单一MoS₂的电化学性能。此外，还推测了高导电性Ag NPs/MoS₂复合材料的导电机理。最后，基于Ag NPs/MoS₂复合材料构建了电化学传感器并对前列腺特异性抗原（PSA）进行检测。结果表明，该传感器针对PSA的检测限为0.009 ng·mL^-1，线性检测范围为0.1~1 000 ng·mL^-1，灵敏度为0.011 μA·mL·ng^-1。     

Ag3PO4/MoS2纳米片复合催化剂制备及可见光催化性能

采用机械球磨法成功制备Ag₃PO₄/MoS₂纳米片复合催化剂。运用X射线衍射仪（XRD）、透射电子显微镜（TEM）、扫描电子显微镜（SEM）、紫外可见漫反射光谱（UV-Vis）和荧光发射光谱（PL）对复合催化剂的结构和形貌进行了表征。结果表明,Ag₃PO₄纳米粒子均匀地附着在MoS₂纳米片层结构上,两者形成紧密结合。以亚甲基蓝为模拟污染物,研究复合催化剂在可见光照射下的光催化特性;通过循环实验考察复合催化剂的稳定性。结果显示,含有1%的MoS₂纳米片与Ag₃PO₄形成的复合催化剂在30 min内对亚甲基蓝的降解率为95%,其降解动力学常数是纯相Ag₃PO₄的2倍。经过5次循环实验后复合催化剂对于亚甲基蓝的降解率为84%,而纯Ag₃PO₄对于亚甲基蓝的降解率仅为35%。Ag₃PO₄/MoS₂纳米片复合催化剂具有优良的光催化活性和高稳定性,主要归因于二硫化钼纳米片与磷酸银形成异质结,磷酸银激发的电子和二硫化钼纳米片产生的空穴直接复合,从而促使光生电子从磷酸银晶体表面快速分离,减轻了磷酸银的光电子腐蚀,同时也提高了复合物的光催化活性。     

球状MoS2/WO3复合半导体制备及其对RhB的光催化性能

采用水热法成功制备了MoS₂/WO₃复合半导体光催化剂,分别通过SEM、TEM、EDS、XRD、Raman和DRS对催化剂的形貌,组成及结构进行表征,并用BET模型计算比表面积。对比发现球状MoS₂/WO₃对罗丹明B（RhB）的光降解效率明显高于纯WO₃、片状MoS₂/WO₃复合半导体。针对球状MoS₂/WO₃复合半导体,分别研究了MoS₂不同负载量（0.5%,1%,2%,5%,10%）对RhB光催化降解性能的影响,结果表明MoS₂含量为2%时催化效果最佳。同时,研究了溶液的pH值（pH=1,3,6,7,11）对光催化降解反应活性的影响,结果显示pH=6时降解率最高。当催化剂量增加到1 g·L^-1时,30min后RhB降解率达到96.6%。球状MoS₂/WO₃的瞬态光电流为0.050 6 mA·cm^-2,比纯WO₃提高了2.4倍。经过5次循环实验,球状MoS₂/WO₃复合半导体催化剂仍能保持90%的高降解率。     

花瓣状微球MoS2/石墨烯复合材料的制备及其电化学性能

采用有利于二维层状结构形成的L-半胱氨酸作为硫源,钼酸钠作为钼源,制备聚乙烯基吡咯烷酮（PVP）辅助水热合成花瓣状微球形貌的MoS₂/还原氧化石墨烯复合电极材料（PVP-MoS₂/RGO）. X射线衍射（XRD）及透射电子显微镜（TEM）证实,经过PVP的适量添加,MoS₂有序堆垛结构的片层数目明显减少. 扫描电子显微镜（SEM）显示,添加适量PVP的MoS₂/石墨烯材料具有分散性更好的花瓣状微球形貌. 上述的少层有序堆垛结构及复合材料的良好分散性缩短了MoS₂中锂离子的嵌入/脱出路径,使其具有更高的容量、循环稳定性和倍率性能.     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

超声化学技术合成MnO2/MoS2纳米交互积层材料

层状氧化锰在氢氧化四甲基胺溶液中超声处理20分钟后，层状氧化锰剥离成纳米层胶体分散液。层状LiMoS₂在超声条件下浸入到10^-4M HNO₃溶液中，随后将得到的处理液加入到层状氧化锰纳米层胶体分散液中，超声处理合成得到了MnO₂/MoS₂纳米交互积层材料，提出了相同电性无机纳米层间超声化学合成新型交互积层材料新技术。     

三维花状Fe2（MoO4）3微米球的水热制备及电化学性能

以FeCl₃·7H₂O和Na₂MoO₄为原料,采用水热合成法制备三维花状Fe₂（MoO₄）₃微米球。探讨不同合成温度对样品形貌的影响,利用XRD、SEM和EDS等分析技术对样品的结构、形貌进行了表征,对该材料的电化学性能进行了测试。结果表明：Fe₂（MoO₄）₃微米球是由二维纳米片自组装而成的花状结构,合成温度为160℃时,制备的样品具有良好的电化学性能,当电流密度为100mA·g^-1,首次放电比容量为1431mAh·g^-1;并具有较好的循环性能和倍率性能。并对160℃合成样品表现较好电化学性能的原因进行了探讨。     

Li_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3,Na_(1.3)Ti_(1.7)Al_(0.3)(PO_4)_3的离子交换研究

研究了在不同温度下的NaNO3和AgNO3水溶液中Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3离子交换行为.实验表明Li1.3Ti1.7Al0.3(PO4)3和Na1.3Ti1.7Al0.3(PO4)3均显示出了高选择性与Na+和Ag+进行离子交换的特征,且对Ag+的选择性高于Na+.升高温度可显著提高Ag/Li和Ag/Na的交换反应速度.     

Crystal growth, structure determination, and optical properties of new potassium-rare-earth silicates K3RESi2O7 (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu)

Single crystals of K₃RESi₂O₇ (RE=Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) were grown from a potassium fluoride flux. Two different structure types were found for this series. Silicates containing the larger rare earths, RE=Gd, Tb, Dy, Ho, Er, Tm, Yb crystallize in a structure K₃RESi₂O₇ that contains the rare-earth cation in both a slightly distorted octahedral and an ideal trigonal prismatic coordination environment, while in K₃LuSi₂O₇, containing the smallest of the rare earths, lutetium is found solely in an octahedral coordination environment. The structure of K₃LuSi₂O₇ crystallizes in space group P6₃/mmc with a=5.71160(10) Å and c=13.8883(6) Å. The structures containing the remaining rare earths crystallize in the space group P6₃/mcm with the lattice parameters of a=9.9359(2) Å, c=14.4295(4) Å, (K₃GdSi₂O₇); a=9.88730(10) Å, c=14.3856(3) Å, (K₃TbSi₂O₇); a=9.8673(2) Å, c=14.3572(4) Å, (K₃DySi₂O₇); a=9.8408(3) Å, c=14.3206(6) Å, (K₃HoSi₂O₇); a=9.82120(10) Å, c=14.2986(2) Å, (K₃ErSi₂O₇); a=9.80200(10) Å, c=14.2863(4) Å, (K₃TmSi₂O₇); a=9.78190(10) Å, c=14.2401(3) Å, (K₃YbSi₂O₇). The optical properties of the silicates were investigated and K₃TbSi₂O₇ was found to fluoresce in the visible.     

Near infrared study of aqueous rare-earth ethylsulfates

The near infrared spectra of aqueous solutions of the ethylsulfates of La, Nd, Gd, Tb, Er, Yb, Lu, Y, and Na have been determined from about 0.2 mol-dm^–3 to nearly saturation. The extinction coefficients of water have been calculated taking into account the absorption of ethylslfate anions determined in separate experiments. Their values appeared to be nearly the same as that of pure water. The relative contents of free OH groups in 0.5 and 0.7M solutions have been estimated from the absorbances at 1160 nm. They were lower in solutions of the heavy rare-earth ethylsulfates (Tb, Er, Yb, Lu) than in equimolar solutions of the lighter ones (La, Nd), confirming our previous view that secondary hydration of the heavy trivalent rare-earth cations is distinctly stronger than that of the lighter ones. A comparison of the spectra of these aqueous ethylsulfates with those of perchlorates shows that the structure-breaking ability of the C₂H₅SO ₄ ^– ion is much smaller than that of perchlorate anion.     

Structural studies of five layer Aurivillius oxides: A2Bi4Ti5O18 (A=Ca, Sr, Ba and Pb)

The room temperature structures of the five layer Aurivillius phases A₂Bi₄Ti₅O₁₈ (A=Ca, Sr, Ba and Pb) have been refined from powder neutron diffraction data using the Rietveld method. The structures consist of [Bi₂O₂]²⁺ layers interleaved with perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks. The structures were refined in the orthorhombic space group B2eb (SG. No. 41), Z=4, and the unit cell parameters of the oxides are a=5.4251(2), b=5.4034(1), c=48.486(1); a=5.4650(2), b=5.4625(3), c=48.852(1); a=5.4988(3), b=5.4980(4), c=50.352(1); a=5.4701(2), b=5.4577(2), c=49.643(1) for A=Ca, Sr, Ba and Pb, respectively. The structural features of the compounds were found similar to n=2-4 layers bismuth oxides. The strain caused by mismatch of cell parameter requirements for the [Bi₂O₂]²⁺ layers and perovskite-like [A₂Bi₂Ti₅O₁₆]²⁻ blocks were relieved by tilting of the TiO₆ octahedra. Variable temperature synchrotron X-ray studies for Ca and Pb compounds showed that the orthorhombic structure persisted up to 675 and 475 K, respectively. Raman spectra of the compounds are also presented.     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

The crystal chemistry of Bi6TP2O15+x, T=Fe, Ni, Zn: Isomorphism and polymorphism, structural relationship to Bi6TiP2O16

The crystal structures of compounds with nominal compositions Bi₆FeP₂O_15+x (I), Bi₆NiP₂O_15+x (II) and Bi₆ZnP₂O_15+x (III) were determined from single-crystal X-ray diffraction data. They are monoclinic, space group I2, Z=2. The lattice parameters for (I) are a=11.2644(7), b=5.4380(3), c=11.1440(5) Å, β=96.154(4)°; for (II) a=11.259(7), b=5.461(4), c=11.109(7) Å, β=96.65(1)°; for (III) a=19.7271(5), b=5.4376(2), c=16.9730(6) Å, β=131.932(1)°. Least squares refinements on F² converged for (I) to R1=0.0554, wR₂=0.1408; for (II) R₁=0.0647, wR₂=0.1697; for (III) R₁=0.0385, wR₂=0.1023. The crystals are complexly twinned by 2-fold rotation about , by inversion and by mirror reflection. The structures consist of edge-sharing articulations of OBi₄ tetrahedra forming layers in the a-c plane that then continue by edge-sharing parallel to the b-axis. The three-dimensional networks are bridged by Fe and Ni octahedra in (I) and (II) and by Zn trigonal bipyramids in (III) as well as by oxygen atoms of the PO₄ moieties. Bi also randomly occupies the octahedral sites. Oxygen vacancies exist in the structures of the three compounds due to required charge balances and they occur in the octahedral coordination polyhedron of the transition metal. In compound (III), no positional disorder in atomic sites is present. The Bi-O coordination polyhedra are trigonal prisms with one, two or three faces capped. Magnetic susceptibility data for compound (I) were obtained between 4.2 and 350 K. Between 4.2 and 250 K it is paramagnetic, μ_eff=6.1 μ_B; a magnetic transition occurs above 250 K.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃-Bi₂O₃-ZnO-Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1 350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1 364,介电损耗低至1.2%。     

The Phase Relations in the System In2O3–TiO2–MgO at 1100 and 1350°C

The phase relations in the system In₂O₃–TiO₂–MgO at 1100 and 1350°C are determined by a classical quenching method. In this system, there are four pseudobinary compounds, In₂TiO₅, MgTi₂O₅ (pseudobrookite type), MgTiO₃ (ilmenite type), and Mg₂TiO₄ (spinel type) at 1100°C. At 1350°C, in addition to these compounds there exist a spinel-type solid solution Mg_2−xIn_2xTi_1−xO₄ (0≤x≤1) and a compound In₆Ti₆MgO₂₂ with lattice constants a=5.9236(7) Å, b=3.3862(4) Å, c=6.3609(7) Å, β=108.15(1)°, and q=0.369, which is isostructural with the monoclinic In₃Ti₂FeO₁₀ in the system In₂O₃–TiO₂–MgO. The relation between the lattice constants of the spinel phase and the composition nearly satisfies Vegard's law. In₆Ti₆MgO₂₂ extends a solid solution range to In₂₀Ti₁₇Mg₃O₆₇ with lattice constants of a=5.9230(5) Å, b=3.3823(3) Å, c=6.3698(6) Å, β=108.10(5)°, and q=0.360. The distributions of constituent cations in the solid solutions are discussed in terms of their ionic radius and site preference effect.     

Microstructures of Some Bi-W-Nb-O Phases

Microstructures of three Bi-W-Nb-O phases have been examined by using high-resolution transmission electron microscopy. Bi₁₇W₂Nb₃O₃₉ and Bi₁₇WNb₃O₃₆ have incommensurate superstructures derived from the defect fluorite-type δ-Bi₂O₃ and can be regarded as intermediate phases between the type II solid solutions in the Bi-Nb-O and Bi-W-O systems. Bi₈W₂Nb₂O₂₃ has a Bi₂WO₆-like subunit cell with a stepped superstructure. Formation mechanisms of various superstructures are discussed.