Copper oxalate complexes: synthesis and structural characterisation

Six copper(II) oxalate complexes, namely {K₂[Cu(ox)₂]} _n (1), {(Hiz)₂[Cu(ox)₂]} _n (2), {[Cu(ox) (N-Bzliz)₂]} _n (3), (HMeiz)₂[Cu(ox)₂] (4), {[Cu(ox)(Meiz)₂]} _n (5), and [Cu(Hox)₂(H₂O)₂](N-Bzliz) (6) where ox = oxalate ion, iz = imidazole, N-Bzliz = N-benzylimidazole, Meiz = 2-methylimidazole, were synthesised and characterised by single crystal X-ray diffraction (complexes 1–5) or powder X-ray diffraction (compound 6). The three-dimensional crystal packing structures of 2, 4, and 5 are consolidated by intermolecular hydrogen bonds linking the oxygen atom of the oxalate group and the amine or imine group of the imidazole-based part into chains. The molecules of complex 6 are held together by intermolecular hydrogen bonds between the oxygen atoms of the oxalate group and coordinated water molecules.     

Synthesis and structural characterisation of gallium and indium fluoroalkoxide ‘ate’ complexes

The treatment of InCl₃ with MOCH(CF₃)₂ (M = Li, Na, K) in a 1:6 stoichiometry, followed by recrystallisation results in the formation of the bimetallic “ate” complexes [Na₃In(OCH(CF₃)₂)₆(THF)₃] (2) and [Li₃In(OCH(CF₃)₂)₆(THF)₃] (5) from hexane, and [K₃In(OCH(CF₃)₂)₆]_n (4) from a THF and toluene mixture. If a 1:3 stoichiometry is used chloride containing compounds [Na₂InCl(OCH(CF₃)₂)₄(THF)₄] (1) and [KInCl₂ (OCH(CF₃)₂)₂(THF)₃]_n · THF (3) are obtained on recrystallisation from hexane. Treatment of GaCl₃ with 6 equivalents of LiOC(CH₃)₂CF₃ gives [LiGa(OC(CH₃)₂CF₃)₄(THF)₂] (6) on recrystallisation from hexane. The protolysis reaction between In(N(SiMe₃)₂)₃, formed in situ from (Me₃Si)₂NH, ⁿBuLi and Incl₃, and HOCH(CH₃)CF₃ results in isolation of [LiIn(OCH(CH₃)CF₃)₃Bu]₂ (7) from hexane. The structures of 2, 4, and 5 all contain the tetranuclear core InO₆M₃. Compounds 1 and 3 have residual chloride; 1 is a trinuclear species with two THF ligands per Na, while 3 is a linear polymer. Compound 6 has a GaO₂Li four-membered parallelogram at its core. Complex 7 has a tetranuclear In₂O₆Li₂ core and an unexpected ⁿBu group on the In atoms. The coordination spheres of the alkali metals in 1-6 include solvated THF while 1-5 display additional close M?F interactions.     

Synthesis and chemical characterisation of some new diheteroaryl thienothiophene derivatives

Treatment of 1-(5-acetyl-3,4-dimethythieno[2,3-b]thiophene-2yl)ethanone (1) with dimethylformamide dimethyl acetal afforded enaminone derivative 2, which reacted with amino derivatives to give the corresponding bis-pyrimidine, bis-pyrazole, bis-triazolo-pyrimidine and bis-benzoimidazopyrimidine derivatives.     

The synthesis and characterisation of europium terpyridine-N-oxide complexes

Europium complexes of a series of terpyridine-N-oxide ligands have been prepared and structurally characterised by crystallographic studies. While the addition of three equivalents of terpyridine-1-oxide or terpyridine-1,1'-bisoxide results in complexes with nine co-ordinate tricapped trigonal prismatic or monocapped square antiprismatic geometries, respectively, three equivalents of the terpyridine-1,1',1'-trisoxide yields an unexpected 8 co-ordinate geometry. Luminescence studies of the three complexes in acetonitrile show a typical europium emission spectra, dominated by the (5)D(0)-(7)F(2) transition. While no simple trend in the relative quantum yields could be ascertained, the terpyridine-1-oxide complex was observed to have the most intense luminescence for this set of complexes.     

The synthesis and characterisation of immobilised palladium carbene complexes and their application to heterogeneous catalysis

Silica supported palladium NHC complexes have been prepared by two different routes: one involving the reaction of silica-supported imidazolium salts with palladium acetate and a direct immobilisation of a pre-formed complex by reacting a (trimethoxysilylpropyl)-N-aryl-imidazolylidene palladium complex with surface hydroxyl groups. A small range of catalysts of varying steric bulk were prepared in order to evaluate the effect on catalytic conversion. The activity of the palladium catalysts in Suzuki cross-coupling reactions has been established. The catalysts prepared by immobilising pre-formed palladium complexes gave superior results for the conversion of aryl bromides and aryl chlorides. In addition, use of sterically bulky NHCs (such as the N-2,6-(diisopropyl)phenyl-substituted ligand) resulted in increased catalytic activity, which is analogous to the trends noted in homogeneous catalysis.     

1,8-Dimethylnaphthalene-bridged diphosphine ligands: synthesis and structural comparison of their palladium complexes

The synthesis of a new series of ligands with a 1,8-dimethylnaphthalene backbone is reported, 1,8-(R2PCH2)2C10H6, where R = (t)Bu 1 (dbpn), (i)Pr 2 (dippn), Cy 3 (dchpn) and Ph 4 (dphpn). The ligand 1 is structurally characterised by X-ray crystallography. A comparative structural study of the respective (diphosphine)Pd(dba) and (diphosphine)PdCl2 complexes is carried out, comparing the X-ray crystal structures of complexes 6, 7, 8, 10, 11 and 12. It is shown that the geometry at the metal is affected by not only ligand demands, but also by the palladium oxidation state and the electronic properties of the ligands. Two qualitative stability series are also identified: 9 < 10 < 11 approximately 12 is observed, and P2Pd(dba) complexes are more stable than the corresponding P2PdCl2 complexes towards opening of the chelate ring. It is also concluded that the bite angle is heavily influenced by the electron donating properties of the ligand.     

New lipophilic 3-hydroxy-4-pyridinonate iron(III) complexes: synthesis and EXAFS structural characterisation

New tris-iron(III) chelates of 3-hydroxy-4-pyridinone ligands derived from maltol (3-hydroxy-2-methyl-4-pyrone) or ethylmaltol (2-ethyl-3-hydroxy-4-pyrone), including a variety of N-aryl (phenyl, 4'-tolyl, 4'-(n-butyl)phenyl, 4'-(n-hexyl)phenyl) and N-benzyl (4'-methylbenzyl, 4'-fluorobenzyl and 4'-(trifluoromethyl)benzylamine) substituents on the nitrogen atom of the pyridinone ring, have been prepared. Characterization by C,H,N elemental analysis and thermogravimetric measurements indicates that most of the complexes are obtained as hydrates of general formula ML3.xH2O. Structural characterization of these difficult to crystallize lipophilic complexes has been achieved by EXAFS spectroscopy. Solutions of iron(III) complexes of maltol, ethylmaltol, 1,2-dimethyl-3-hydroxy-4-pyridinone and 1-phenyl-2-methyl-3-hydroxy-4-pyridinone in methanol-water mixtures were also examined by EXAFS. Distances from the central atom to ligand atoms, within 6 A of the metal, have been determined in the solid and solution samples and the results show that the structure observed in the powder is maintained in solution. The local structure around the metal centre, bond distances and bond angles, does not change significantly with variable lipophilicity, thus indicating that ligands may be tailored according to specific needs without altering their chelation properties. EXAFS data analysis for this set of tris-iron(III) compounds illustrates the important contribution of both intra-ligand and inter-ligand multiple scattering pathways through the metal centre to a peak observed in the FT spectrum at twice the metal ligand distance (approximately 4 A). The present results demonstrate that EXAFS features at twice the metal-ligand distance are valuable in the assignment of molecular geometry and that location of hydration water molecules, by EXAFS analysis, is limited by the geometry of the complexes, in particular for those in which ligands containing phenyl rings are present.     

Synthesis and structural characterisation of lithium and sodium 2,6-dibenzylphenolate complexes

The stoichiometric treatment of 2,6-dibenzylphenol (HOdbp) or 2,2"-dimethoxy-2,6-dibenzylphenol (HOdbpOMe) with n-butyllithium or sodium bis(trimethylsilyl)amide (the latter as a solution in THF) in Et2O or DME affords the dimeric alkali metal phenolates [{M(Odbp)(L)}2] (M = Li; L = Et2O (1), L = DME (2), M = Na; L = Et2O (5), L = DME (6)), [{Li(OdbpOMe)}2] (3) and [{M(OdbpOMe)(L)}2] (M = Li; L = DME (4), M = Na; L = THF (7), L = DME (8)). Complexes 3 and 7 exhibit -OdbpOMe methoxy coordination and all four sodium complexes (5-8) display pi-aryl contacts from one phenolate radial arm to each sodium centre. The attempted synthesis of {Na(odbp)}n by direct sodiation of HOdbp yields a small quantity of the 2-benzylphenolate [{Na(Ombp)(DME)}4] (9) (-Ombp = -OC6H4-2-CH2Ph), providing a rare example of benzyl C-C bond scission.     

Luminescent piano-stool complexes incorporating 1-(4-cyanophenyl)imidazole: synthesis, spectral, and structural studies

Three novel luminescent piano-stool arene ruthenium complexes of general formula [(eta(6)-arene)RuCl(2)(CPI)] (eta(6)-arene = benzene, 1, p-cymene, 2, and hexamethylbenzene, 3; CPI=1-(4-cyanophenyl)imidazole were prepared. The molecular structures of 2 and 3 were determined crystallographically. Reaction of 1-3 with EPh(3) (E = P, As, or Sb) and N-N donor bases such as 2,2'-bipyridine and 1,10-phenanthroline afforded cationic mononuclear complexes of general formula [(eta(6)-arene)RuCl(CPI)(EPh(3))](+) (eta(6)-arene = C(6)H(6), E = P (1a), E = As (1b), E = Sb(1c); eta(6)-arene = C(10)H(14), E = P (2a), E = As (2b), E = Sb (2c); eta(6)-arene = C(6)Me(6), E = P (3a), E = As (3b), E = Sb (3c)) and [(eta(6)-arene)Ru(N-N)(CPI)](2+) (eta(6)-arene = C(6)H(6), N-N = bipy (1d), N-N = phen (1e); eta(6)-arene = C(10)H(14), N-N = bipy (2d), N-N = phen (2e); eta(6)-arene = C(6)Me(6), N-N = bipy (3d), N-N = phen (3e)). Molecular structures of 1a and 2a were also confirmed by X-ray crystallography. Structural studies of the complexes 2, 3, 1a, and 2a supported coordination of CPI through the imidazole nitrogen and the presence of a pendant nitrile group. Structural data also revealed stabilization of crystal packing in the complexes 2, 3, and 2a by C-H...X (X = Cl, F) type inter- and intramolecular interactions and in complex 1a by pi-pi stacking. Moreover, neutral homonuclear bimetallic complexes 2f,g were prepared by using complex 2 as a metallo-ligand, where CPI acts as a bridge between two metal centers. Emission spectra of the mononuclear complexes [(eta(6)-arene)RuCl(2)(CPI)] and its derivatives exhibited intense luminescence when excited in the metal to ligand charge-transfer band.     

The synthesis and structural characterisation of the mercury (II) halide complexes of the phosphorus ylide carbethoxymethylenetriphenylphosphorane

The reaction of the ylide carbethoxymethylenetriphenylphosphorane (EPPY), Ph₃PCHCOOEt, with mercury (II) halides has been investigated. The resulting dimeric mercury (II)-ylide complexes are isostructural and of the form [(EPPY)(HgX₂)]₂ where X is either bromine (1), chlorine (2), or iodine (3). These complexes have been characterised by spectroscopic techniques and X-ray diffraction. The ylide ligands have been shown to be C-coordinated to the mercury (II) atom.     

Synthesis and structural characterisation of polynuclear cobalt complexes with partially-deprotonated Bis-tris

The synthesis and crystal structures of [Co4Na2(HL)2(H2L)2(MeOH)4] and [Co5(HL)2(H2L)2] are reported as the first examples of polynuclear transition metal complexes assembled using partially-deprotonated Bis-tris {2-[bis(2-hydroxyethyl)amino]-2-(hydroxymethyl)propane-1,3-diol, H5L}.     

Hydrothermal synthesis, structural characterisation and magnetic behaviour of hybrid complexes of N-(phosphonomethyl)iminodiacetate

Two new compounds containing multidentate chelating organic residues of N-(phophonomethyl)iminodiacetic acid (H₄pmida), [M(pyr)(H₂O)₄][M₂(Hpmida)₂(pyr)(H₂O)₂]·2(H₂O) (where pyr=pyrazine and M=Co²⁺ or Ni²⁺ for I and II, respectively) have been synthesised and structurally characterised by single-crystal and powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermal analysis and solid-state ³¹P MAS NMR. The compounds contain discrete binuclear anionic [M₂(Hpmida)₂(pyr)(H₂O)₂]²⁻ units in which one pyrazine ligand bridges two M²⁺ cations which are completely trapped inside three five-membered chelate rings formed by the Hpmida³⁻ ligands. These moieties close pack in the ac plane via a series of strong and highly directional O–HO hydrogen bonds leading to the formation of anionic layers. One-dimensional cationic coordination polymers are placed in-between and strongly hydrogen-bonded to these layers. The magnetic properties of these two materials are also reported.     

Lanthanide complexes of new nonadentate imino-phosphonate ligands derived from 1,4,7-triazacyclononane: synthesis, structural characterisation and NMR studies

The polyamino ligand 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane (1) has been used to synthesise two new ligands by Schiff-base condensation with methyl sodium acetyl phosphonate to give ligand L and methyl sodium 4-methoxybenzoyl phosphonate to give ligand L1 in the presence of lanthanide ion as templating agent to form the complexes [Ln(L)] and [Ln(L1)](Ln = Y, La, Gd, Yb). Both ligands L and L1 have nine donor atoms comprising three amine and three imine N-donors and three phosphonate O-donors and form Ln(III) complexes in which the three pendant arms of the ligands wrap around the nine-coordinate Ln(III) centres. Complexes with Y(III), La(III), Gd(III) and Yb(III) have been synthesised and the complexes [Y(L)], [Gd(L)] and [Gd(L1)] have been structurally characterised. In all the complexes the coordination polyhedron about the lanthanide centre is slightly distorted tricapped trigonal prismatic with the two triangular faces of the prism formed by the macrocyclic N-donors and the phosphonate O-donors. Interestingly, given the three chiral phosphorus centres present in [Ln(L)] and [Ln(L1)] complexes, the three crystal structures reported show the presence of only one diastereomer of the four possible. 1H, 13C and 31P NMR spectroscopic studies on diamagnetic [Y(L)] and [La(L)] and on paramagnetic [Yb(L)] complexes indicate the presence in solution of all the four different diastereomers in varying proportions. The stability of complexes [Y(L)] and [Y(L1)] in D2O in both neutral and acidic media, and the relaxivity of the Gd(III) complexes, have also been investigated.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

N-benzoylimido complexes of palladium. Synthesis, structural characterisation and structure-reactivity relationship

Benzoyl azides, ArC(O)N3, 2, (Ar = phenyl or substituted phenyl), react with [Pd2Cl2(dppm)2], 1, [dppm = bis(diphenylphosphino)methane] with the formation of novel [Pd2Cl2(mu-NC(O)Ar)(dppm)2], 3, benzoylnitrene complexes that were structurally characterised by multinuclear magnetic resonance and IR spectroscopy and, in several instances, by single crystal X-ray diffraction. As shown by crystallographic studies, the C2P4Pd2 rings adopt extended twist-boat conformations with methylene groups bending towards the bridging benzoylimido moieties. X-ray diffraction studies have revealed the chiral nature of the imido complexes, the chiral element being the propeller-like C2P4Pd2 ring. Structural data accumulated on complexes 3 such as short C-N distances (1.32 A), elongated C=O bonds (1.30 A) as well as the outstandingly high barrier to internal rotation around the N-C(O) linkage (88.3 kJ mol(-1)) are in line with extensive ppi-ppi interaction between the bridging nitrogen and the carbonyl carbon atoms. Theoretical calculations indicate an electron shift from the dimer towards the apical nitrogen atom, which, in turn, facilitates the donation of electrons towards the carbonyl moiety. To elucidate the structure-reactivity relationship of benzoyl azides towards 1, crystallographic and solution IR spectroscopic studies were carried out on a series of para-substituted benzoyl azides. The reaction obeys the Hammett equation. The large positive value of the reaction constant indicates that the azides act as electrophiles in the reaction studied. The enhanced reactivity of 2-nitrobenzoyl azide has been attributed to a decreased conjugation of the phenyl and carbonyl moieties in this reagent.     

Oligo(U-terpyridines) and their ruthenium(II) complexes: synthesis and structural properties

A highly efficient domino reaction starting from tetrahydroquinolinone and a series of bisiminium salts provides the corresponding bis(U-terpyridines). These ligands have been treated with [(tpy)RuCl3] to afford novel dinuclear complexes [(tpy)Ru(L)Ru(tpy)]4+. The protocol is also applied for the synthesis of a star-shaped tris(U-terpyridine) and the trinuclear complex [{(tpy)Ru}3(L)]6+. In view of potential applications in the fields of metallopolymers and molecular devices, the electronic spectra, as well as the electrochemical potentials of all the complexes have been obtained. According to these data, no significant intermetal interaction has been observed for the ruthenium complexes presented here.     

Luminescent alkynyl platinum-cadmium complexes: structural characterization of an unusual decanuclear cluster

The reaction of (NBu(4))(2)[Pt(C triple bond CPh)(4)] with Cd(ClO(4))(2).6H(2)O in a 1:1 molar ratio yields a white solid [PtCd(C triple bond CPh)(4)](n) 1 (75% yield) together with yellow crystals of a very unusual decanuclear platinum-cadmium cluster [Pt(4)Cd(6)(C triple bond CPh)(4)(mu-C triple bond CPh)(12)(mu(3)-OH)(4)] 2 in low yield. Slow diffusion of acetonic solutions of the starting materials under aerobic conditions only produces crystals of 2 which have been shown by an X-ray analysis to be composed of a big hexanuclear cation [Cd(6)(mu(3)-OH)(4)](8+) and four [Pt(C triple bond CPh)(4)](2-) anions, held together by Pt.Cd and pi.Cd acetylide interactions. On the other hand, treatment of the insoluble product 1 with 1 equiv of NBu(4)X yields tetranuclear mixed-metal soluble complexes (NBu(4))(2)[[Pt(mu-C triple bond CPh)(4)](2)(CdX)(2)] (X = Cl A, Br 3, CN 4), which contain two platinate fragments connected by two CdX units through Pt.Cd and mainly Cd.C(alpha) interactions. All complexes are strongly emissive in the solid state at room temperature.     

Luminescent transition metal complexes as sensors: structural effects on pH response

A series of luminescent transition metal complexes using the pH-sensitive ligand 5-carboxy-1,10-phenanthroline has been synthesized and characterized. The complexes, based on Ru(II) and Re(I), show monotonic changes in both luminescent intensity and lifetime with pH values over the range 2 < pH < 9. The impact of various structural features on both the range of pH sensitivity and dynamic response was studied using both intensity and lifetime measurements. It was possible to predictably tune the pH sensitivity range over about 1.5 pKa units. While significant variation in the dynamic response range was observed, the correlation with structural features needs further study.