Synthesis of poly(4-vinyl pyridine-b-methyl methacrylate) by MAMA-SG1 initiated sequential polymerization and formation of metal loaded block copolymer inverse micelles

Well-defined poly(4-vinylpyridine) (P4VP) was synthesised by nitroxide-mediated radical polymerization using the BlocBuilder MAMA-SG1. The controlled character of the polymerization was confirmed by kinetic measurements and linear increase of the molar mass with monomer conversion. Poly(4-vinylpyridine) terminated with SG1 was then used as macroinitiator and chain extended to form poly(4-vinylpyridine-b-methyl methacrylate) and poly(4-vinylpyridine-b-(methyl methacrylate-co-styrene)) block copolymers. These block copolymers spontaneously organized into spherical inverse micelles in THF with critical micelle concentrations of 0.1 mg/mL for poly(4VP₁₉₀-b-MMA₉₁) and 0.01 mg/mL for poly(4VP₁₉₀-b-(MMA₅₇-co-S₁₈)) and sizes of 70 and 130 nm (DLS), respectively. The inverse micelles were loaded with copper(II)acetate leading to a slight increase in micelle size. The uniform structure of the inverse micelles was confirmed by FeSEM images, while the presence of copper in the micelle core was established by energy-dispersive X-ray spectroscopy (EDX) and FTIR spectroscopy.     

A pH-Responsive Zwitterionic Polyurethane Prodrug as Drug Delivery System for Enhanced Cancer Therapy

Numerous nanocarriers with excellent biocompatibilities have been used to improve cancer therapy. However, nonspecific protein adsorption of nanocarriers may block the modified nanoparticles in tumor cells, which would lead to inefficient cellular internalization. To address this issue, pH-responsive polyurethane prodrug micelles with a zwitterionic segment were designed and prepared. The micelle consisted of a zwitterionic segment as the hydrophilic shell and the drug Adriamycin (DOX) as the hydrophobic inner core. As a pH-responsive antitumor drug delivery system, the prodrug micelles showed high stability in a physiological environment and continuously released the drug under acidic conditions. In addition, the pure polyurethane carrier was demonstrated to be virtually non-cytotoxic by cytotoxicity studies, while the prodrug micelles were more efficient in killing tumor cells compared to PEG-PLGA@DOX. Furthermore, the DOX cellular uptake efficiency of prodrug micelles was proved to be obviously higher than the control group by both flow cytometry and fluorescence microscopy. This is mainly due to the modification of a zwitterionic segment with PU. The simple design of zwitterionic prodrug micelles provides a new strategy for designing novel antitumor drug delivery systems with enhanced cellular uptake rates.     

Theranostic hyaluronic acid prodrug micelles with aggregation-induced emission characteristics for targeted drug delivery

Theranostic hyaluronic acid (HA) prodrug micelles with pH-responsive drug release and aggregation-induced emission (AIE) properties were prepared by chemical graft of biomimetic phosphorylcholine (PC), anticancer drug doxorubicin (DOX) and AIE fluorogen tetraphenylene (TPE) to the HA backbone. DOX was conjugated to the HA backbone by a hydrazone bond which can be hydrolyzed under acidic environment and result in pH-triggered smart release of DOX. The TPE units with typical AIE characteristics were applied for real time drug tracking in cancer cells. The HA-based prodrugs could self-assemble into micelles in aqueous solution as confirmed by the dynamic light scattering (DLS) and transmission electron microscopy (TEM). The intracellular distribution of HA prodrug micelles could be clearly observed by fluorescence microscopy based on the strong fluorescence of TPE. Moreover, after treated with the micelles, stronger fluorescence of TPE in CD44 overexpressed MDA-MB-231 cancer cells was observed, compared to the CD44 negative cell line, NIH3T3 cells, suggesting efficient cell uptake of HA prodrug micelles by receptor-mediated endocytosis. The cell viability results indicated that the prodrug micelles could inhibit the proliferation of the cancer cells effectively. Such pH-triggered theranostic drug delivery system with AIE features can provide a new platform for targeted and image-guided cancer therapy.     

Study of amphiphilic poly(1-dodecene-co-para-methylstyrene)-graft-poly(ethylene glycol). Part II: Preparation and micellization behavior of the amphiphilic copolymers

Poly(1-dodecene-co-pMS) copolymers were brominated by HBr/H₂O₂ system with high selectivity at the methyl groups of pMS units. It was found that longer reaction time, higher pMS content, and lower molecular weight of the copolymers were helpful for higher degree of bromination. Through a modified Williamson ether synthesis, poly(ethylene glycol) monomethyl ethers (PEG) were grafted onto the brominated copolymers, and the amphiphilic poly(1-dodecene-co-pMS)-graft-PEG copolymers which can be readily dissolved in n-octane were successfully synthesized. Due to their amphiphilic characteristics, they can self-assemble spontaneously into reverse micelles in n-octane. Their micellization behaviors were investigated by fluorescence probe technique, transmission electron microscopy (TEM), and dynamic light scattering (DLS). The critical micelle concentrations of the three copolymers in n-octane were determined at about 1.26 × 10⁻⁴, 1.58 × 10⁻⁴, and 1.95 × 10⁻⁴ g ml⁻¹ by fluorescence measurements. The morphologies of micelles were preliminarily explored by TEM and were found to be spheres.     

Synthesis and characterization of biodegradable pH and reduction dual‐sensitive polymeric micelles for doxorubicin delivery

Novel pH and reduction dual‐sensitive biodegradable polymeric micelles for efficient intracellular delivery of anticancer drugs were prepared based on a block copolymer of methyloxy‐poly(ethylene glycol)‐b‐poly[(benzyl‐l ‐aspartate)‐co‐(N‐(3‐aminopropyl) imidazole‐l ‐aspartamide)] [mPEG‐SS‐P(BLA‐co‐APILA), MPBA] synthesized by a combination of ring‐opening polymerization and side‐chain reaction. The pH/reduction‐responsive behavior of MPBA was observed by both dynamic light scattering and UV–vis experiments. The polymeric micelles and DOX‐loaded micelles could be prepared simply by adjusting the pH of the polymer solution without the use of any organic solvents. The drug release study indicated that the DOX‐loaded micelles showed retarded drug release in phosphate‐buffered saline at pH 7.4 and a rapid release after exposure to weakly acidic or reductive environment. The empty micelles were nontoxic and the DOX‐loaded micelles displayed obvious anticancer activity similar to free DOX against HeLa cells. Confocal microscopy observation demonstrated that the DOX‐loaded MPBA micelles can be quickly internalized into the cells, and effectively deliver the drugs into nuclei. Thus, the pH and reduction dual‐responsive MPBA polymeric micelles are an attractive platform to achieve the fast intracellular release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1771–1780     

Comparison of drug delivery properties of PEG-<Emphasis Type="Italic">b</Emphasis>-pdhpc micelles with different compositions

An anti-tumor drug doxorubicin was encapsulated in micelles of poly（ethylene glycol）-b-poly（2,2-dihydroxyl-methyl propylene carbonate）（PEG-b-PDHPC） diblock copolymers.The morphology of both blank micelles and drug loaded micelles was characterized by TEM.The in vitro drug release profiles of micelles were investigated.The cytotoxicity of the micelles was evaluated by incubating with Hela tumor cells and 3T3 fibroblasts.The drug loaded micelles were co-cultured with HepG2 cells to evaluate the in vitro anti-tumor efficacies.The results showed that the mean sizes of both micelles with different copolymer compositions increased after being loaded with drugs.The drug release rate of PEG₄₅-b-PDHPC₃₄ micelles was faster than that of mPEG₁₁₄-b-PDHPC₂₆,micelles.Both of the two block copolymers were non-toxic.The confocal laser scanning microscopy and flow cytometry results showed that both the drug loaded micelles could be internalized efficiently in HepG2 cells.The PEG₄₅-b-PDHPC₃₄ micelles exhibited higher anti-tumor activity comparing to mPEG₁₁₄-b-PDHPC₂₆ micelles.     

Synthesis of bottlebrush block copolymers from bottlebrush polystyrene and bottlebrush random copolymer of ω-end-norbornyl polymethacrylates and their self-assembly

Six different bottlebrush block copolymers (BBCPs) (A-b-(B-co-C)) from bottlebrush polystyrene (A) and bottlebrush random copolymers (B-co-C) of polymethacrylates were synthesized through living anionic polymerization and ring-opening metathesis polymerization. To induce the phase separation of bottlebrush polystyrene (PNB-g-PS) (A) and bottlebrush poly(benzyl methacrylate) (PNB-g-PBzMA) (C)-based BBCP with an extremely low Flory–Huggins interaction parameter (χ), three kinds of bottlebrush polymethacrylates (B): poly(norbornene-g-methyl methacrylate) (PNB-g-PMMA), poly(norbornene-g-tert-butyl methacrylate) (PNB-g-PtBMA), and poly(norbornene-g-methacrylic acid) (PNB-g-PMAA), respectively, were randomly combined with C. An order–disorder phase transition of the BBCPs (A-b-(B-co-C)) was observed with a change in mole ratios of PMMA, PtBMA, or PMAA to PBzMA of 25, 50, and 75% in random copolymer blocks using field-emission scanning microscopy. While the BBCP with 25% of PMAA in the random copolymer block showed an ordered lamellar nanostructure, a disordered morphology was revealed at 75% PMAA. SEM showed that the incorporation of PtBMA and PBzMA showed better-ordered lamellar morphologies than was the case with PMMA and PBzMA at the same mole ratios.     

Galactose-modified enzymatic synthesis of poly(amino-co-ester) micelles for co-delivery miR122 and sorafenib to inhibit hepatocellular carcinoma development

Nanomaterials as drug carriers hold promise for the treatment of carcinomas, but integrating multiple functions into a single vector is difficult. In this study, we aim to develop efficient materials as vectors for co-delivery of microRNA-122 (miR-122) and sorafenib (SRF). We successfully synthesized amphiphilic galactose-modified PEGylated poly(amino-co-ester) (Gal-PEG-PPMS) copolymers consisted of hydrophilic Gal-PEG5k chain segments and hydrophobic poly(ω-pentadecalactone-co-N-methyldiethyleneamine-co-sebacic acid) chain segments, which self-assembled to form cationic micelles at pH 5.2. The results showed that the micelles could encapsulate SRF and bind miR122 simultaneously, increase cellular uptake efficiency. Furthermore, the micelles showed favorable transfection efficiency in enhancing miR122 expression level, the migration and invasion ability of hepatocellular carcinoma (HCC) cells were significantly inhibited after being transfected with miR122-loaded micelles. Most importantly, the co-delivery micelles decreased cell activities of HepG2 cells, which was more effective than miR122 or SRF loaded micelles alone. Collectively, Gal-PEG-PPMS nanoparticles are promising multifunctional carriers for miR122 and SRF co-delivery system to treat HCC.     

Fabrication of polymeric micelles with core–shell–corona structure for applications in controlled drug release

Thermo-responsive polymeric micelles of poly (ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-g-lactide)-b-poly(N-isopropylacrylamide) (PEG-P(HEMA-PLA)-PNIPAM) with core–shell–corona structure were fabricated for applications in controlled drug release. The graft copolymer of PEG-P(HEMA-PLA)-PNIPAM was self-assembled into core–shell micelles with a densely PLA core and mixed PEG/PNIPAM shells at 25 °C in aqueous media. By increasing the temperature above the lower critical solution temperature of PNIPAM, these core–shell micelles could be converted into core–shell–corona micelles because of the collapse of PNIPAM block on the PLA core as the inner shell and the soluble PEG block stretching outside as the outer corona. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles as a model drug. Compared with polymeric micelles formed by liner PEG-b-PLA-b-PNIPAM triblock copolymer, these polymeric micelles exhibited higher loading capacity, and release of DOX from the polymeric micelles with core–shell–corona structure was well-controlled.     

Design and Development of D‒α‒Tocopheryl Polyethylene Glycol Succinate‒block‒Poly(ε-Caprolactone) (TPGS−b−PCL) Nanocarriers for Solubilization and Controlled Release of Paclitaxel

The objective of this study was to synthesize and characterize a set of biodegradable block copolymers based on TPGS-block-poly(ε-caprolactone) (TPGS-b-PCL) and to assess their self-assembled structures as a nanodelivery system for paclitaxel (PAX). The conjugation of PCL to TPGS was hypothesized to increase the stability and the drug solubilization characteristics of TPGS micelles. TPGS-b-PCL copolymer with various PCL/TPGS ratios were synthesized via ring opening bulk polymerization of ε-caprolactone using TPGS, with different molecular weights of PEG (1–5 kDa), as initiators and stannous octoate as a catalyst. The synthesized copolymers were characterized using ¹H NMR, GPC, FTIR, XRD, and DSC. Assembly of block copolymers was achieved via the cosolvent evaporation method. The self-assembled structures were characterized for their size, polydispersity, and CMC using dynamic light scattering (DLS) technique. The results from the spectroscopic and thermal analyses confirmed the successful synthesis of the copolymers. Only copolymers that consisted of TPGS with PEG molecular weights ≥ 2000 Da were able to self-assemble and form nanocarriers of ≤200 nm in diameter. Moreover, TPGS₂₀₀₀-b-PCL₄₀₀₀, TPGS₃₅₀₀-b-PCL₇₀₀₀, and TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micelles enhanced the aqueous solubility of PAX from 0.3 µg/mL up to 88.4 ug/mL in TPGS₅₀₀₀-b-PCL₁₅₀₀₀. Of the abovementioned micellar formulations, TPGS₅₀₀₀-b-PCL₁₅₀₀₀ showed the slowest in vitro release of PAX. Specifically, the PAX-loaded TPGS₅₀₀₀-b-PCL₁₅₀₀₀ micellar formulation showed less than 10% drug release within the first 12 h, and around 36% cumulative drug release within 72 h compared to 61% and 100% PAX release, respectively, from the commercially available formulation (Ebetaxel^®) at the same time points. Our results point to a great potential for TPGS-b-PCL micelles to efficiently solubilize and control the release of PAX.     

Synthesis and characterization of Fe(II)-coordinated PS-b-P[NIPAM-co-(VBC-Fe-DMAP)] block copolymers

In this work,a new type of block polymers,polystyrene-b-poly[(N-isopropyl acrylamide)-co-(vinyl benzyl chloride)](PS-b-P(NIPAM-co-VBC)),was prepared via reversible addition fragmentation transfer polymerization,then pentacyano(4-(dimethylamino pyridine))ferrate(Fe-DMAP) was attached to VBC units through a quaternization process.The Fe(Ⅱ)-coordinated PS-b-P[NIPAM-co-(VBC-Fe-DMAP)]block copolymers were characterized by ~1H-NMR,FT-IR and TGA.The self-assembly behavior of the block copolymers was also investigated and the micelle morphology was characterized by TEM.It was found that the PS-b-P(NIPAM-co-VBC) block polymer and Fe-coordinated block copolymer could both form spherical micelles in DMF/MeOH mixed solvent.     

Fluorescent Polymeric Micelles with Aggregation‐Induced Emission Properties for Monitoring the Encapsulation of Doxorubicin

A new type of fluorescent polymeric micelles is developed by self‐assembly from a series of amphiphilic block copolymers, poly(ethylene glycol)‐b‐poly[styrene‐co‐(2‐(1,2,3,4,5‐pentaphenyl‐1H‐silol‐1‐yloxy)ethyl methacrylate)] [PEG‐b‐P(S‐co‐PPSEMA)]. Their capability of loading doxorubicin (DOX) is investigated by monitoring the loading content, encapsulation efficiency, and photophysical properties of micelles. Förster resonance energy transfer from PPSEMA to DOX is observed in DOX‐loaded micelles, which can serve as an indication of successful encapsulation of DOX in these micelles. The application of this new type of fluorescent polymeric micelles as a fluorescent probe and an anticancer drug carrier simultaneously is explored by studying the intracellular uptake of DOX‐loaded micelles.

     

pH-responsive star-shaped functionalized poly(ethylene glycol)-b-poly(ε-caprolactone) with amino groups

Functional star-shaped 4-arm poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-amino-ε-caprolactone)] (4-arm PEG-b-P(CL-co-ACL) was synthesized through ring-opening polymerization. The structure of the copolymer was confirmed by ¹H NMR, Fourier transform infrared spectroscopy (FTIR), and gel permeation chromatography (GPC). To further understand the copolymers, the difference of the conversion rate between ε-caprolactone (CL) and γ-(carbamic acid benzyl ester)-ε-caprolactone (CABCL) and the detailed deprotection condition were studied. The thermal property of the copolymer was analyzed by WAXR and differential scanning calorimetry (DSC), which demonstrated that the thermal property could be well adjusted. The pH-responsive behavior of the copolymers was studied in detail by dynamic light scattering (DLS), pH titration, and pyrene fluorescence methods, which indicated that it could form micelles and exhibit pH responsibility. Moreover, the copolymer was nontoxic and had good biocompatibility according to the results by 3-(4,5)-dimethylthiahiazo (-z-y1)-3,5-di-phenytetrazoliumromide (MTT) assay.     

Synthesis and properties of Pluronic-based pentablock copolymers with pendant amino groups

Amphiphilic Pluronic-based pentablock copolymers with pendant amino groups have been successfully synthesized via ring opening polymerization of γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL) and ε-caprolactone (εCL) using Pluronic F127 as macroinitiator and Sn(Oct)₂ as catalyst, and followed by hydrolysis of the Cbz protected groups under acidic conditions. The structure of the copolymer was confirmed by proton nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra. In addition, gel permeation chromatography results demonstrated that the synthetic copolymer had a single and symmetrical peak. Moreover, the crystallinity and hydrophilicity could be well adjusted by the content of the functionalized monomer. Successful formation of aggregates was demonstrated by fluorescence method and transmission electron microscopy revealed that the micelles had a spherical morphology and the size was on nano scale according to the laser particle sizer results. The polymeric micelles had no obvious cytotoxicity even the micelles concentration reached 500 mg/L. Thus the Pluronic-b-poly(γ-amino-ε-caprolactone-co-ε-caprolactone) copolymers have great potential for the use in the biomedical fields.     

pH-responsive amphiphilic hybrid random-type copolymers of poly(acrylic acid) and poly(acrylate-POSS): synthesis by ATRP and self-assembly in aqueous solution

The synthesis and subsequent self-assembly of novel, random-type amphiphilic pH-responsive hybrid copolymers, having acrylic acid as pH-responsive hydrophilic and acrylate-polyhedral oligomeric silsesquioxane (POSS) as hydrophobic constituents are reported. The synthesis was carried out in two steps: first, t-butylacrylate and acrylate-POSS are copolymerized by ATRP, followed by the acid hydrolysis of t-butyl acrylate constituents of the synthesized poly(t-butylacrylate)-co-poly(acrylate-POSS) copolymers to achieve poly(acrylic acid)-co-poly(acrylate-POSS). It was found that POSS is a powerful hydrophobic unit. With very low POSS concentration in the copolymers, i.e., one POSS unit per 40 to 110 acrylic acid repeat units, the obtained amphiphilic hybrid copolymers could self-assemble in aqueous solution to form nanoaggregates, as revealed by the laser light scattering and fluorescence studies on the aqueous solutions of the obtained copolymers. The formation of hydrophobic core in the self-assembled aggregates is verified by the solubilization of pyrene (used as probe in fluorescence measurements) in aqueous solution of the copolymers. In addition to pH-dependent self-assembly behavior, it is also demonstrated that the particle size and aggregation number of the aggregates can be tuned simply by varying the composition of the copolymer, i.e., by changing the molar ratio of poly(acrylic acid) to poly(acrylate-POSS) in the copolymer. Finally, preliminary results on the influence of salt (NaCl) on the self-assembly of poly(acrylic acid)-co-poly(acrylate-POSS) in aqueous solution are also presented.     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Dual-response nanocarrier based on graft copolymers with hydrazone bond linkages for improved drug delivery

Core–shell micelles with biodegradability, thermo- and pH-response were successfully demonstrated by poly(2-oxepane-1,5-dione-co-ɛ-caprolactone) (P(OPD-co-CL)) grafted with hydrophilic segments of amine-terminated poly(N-isopropylacrylamide) (At-PNIPAM). To compare with the graft copolymer, P(OPD-co-CL) block PNIPAM polymer was also prepared. The micelles with core–shell structure were formed with both graft and block copolymers by self-assembly in aqueous solutions, of which PNIPAM shell is thermo-response. Furthermore, P(OPD-co-CL)-g-PNIPAM also showed pH-sensitivity, which was attributed to the acid-cleavable property of the hydrazone bond. The low critical micelle concentrations (CMCs) of graft polymers and block polymers were 6.7 mg/L and 14.3 mg/L, respectively, which indicated the formation of stable micelles. Both drug-free and drug-loaded micelles were in uniformly spherical shape observed by transmission electron microscopy (TEM). The sizes of the drug-free and drug-loaded micelles prepared from graft polymer were 123.5 nm and 146.5 nm, respectively, and the sizes of those prepared from block polymer were 197.5 nm and 211.5 nm, respectively. The lower critical solution temperature (LCST) for the graft polymer was 34.3 °C, while that for the block polymer was 28.1 °C, demonstrating a thermo-response. The graft polymeric micelles exhibited thermo-triggered decelerated release at pH 7.4, and pH-triggered accelerated release at 25 °C in vitro release test, indicating that the graft polymeric micelles could be a promising site-specific drug delivery system for enhancing the bioavailability of the drug in targeted pathological areas.     

A Comparative Study of Cellular Uptake and Subcellular Localization of Doxorubicin Loaded in Self‐Assemblies of Amphiphilic Copolymers with Pendant Dendron by MDA‐MB‐231 Human Breast Cancer Cells

Previously synthesized amphiphilic diblock copolymers with pendant dendron moieties have been investigated for their potential use as drug carriers to improve the delivery of an anticancer drug to human breast cancer cells. Diblock copolymer (P₇₁D₃)‐based micelles effectively encapsulate the doxorubicin (DOX) with a high drug‐loading capacity (≈95%, 104 DOX molecules per micelle), which is approximately double the amount of drug loaded into the diblock copolymer (P₂₉₆D₁) vesicles. DOX released from the resultant P₇₁D₃/DOX micelles is approximately 1.3‐fold more abundant, at a tumoral acidic pH of 5.5 compared with a pH of 7.4. The P₇₁D₃/DOX micelles also enhance drug potency in breast cancer MDA‐MB‐231 cells due to their higher intracellular uptake, by approximately twofold, compared with the vesicular nanocarrier, and free DOX. Micellar nanocarriers are taken up by lysosomes via energy‐dependent processes, followed by the release of DOX into the cytoplasm and subsequent translocation into the nucleus, where it exert its cytotoxic effect.

     

Tumor Microenvironment‐Activated NIR‐II Nanotheranostic System for Precise Diagnosis and Treatment of Peritoneal Metastasis

Activatable theranostic systems show potential for improved tumor diagnosis and therapy owing to high detection specificities, effective ablation, and minimal side‐effects. Herein, a tumor microenvironment (TME)‐activated NIR‐II nanotheranostic system (FEAD1) for precise diagnosis and treatment of peritoneal metastases is presented. FEAD1 was fabricated by self‐assembling the peptide Fmoc‐His, mercaptopropionic‐functionalized Ag₂S quantum dots (MPA‐Ag₂S QDs), the chemodrug doxorubicin (DOX), and NIR absorber A1094 into nanoparticles. We show that in healthy tissue, FEAD1 exists in an NIR‐II fluorescence “off” state, because of Ag₂S QDs‐A1094 interactions, while DOX remains in stealth mode. Upon delivery of FEAD1 to the tumor, the acidic TME triggers its disassembly through breakage of the Fmoc‐His metal coordination and DOX hydrophobic interactions. Release of A1094 switches on Ag₂S fluorescence, illuminating the tumor, accompanied by burst release of DOX within the tumor tissue, thereby achieving precise tumor theranostics. This TME‐activated theranostic strategy holds great promise for future clinical applications.     

Synthesis and micellization of thermoresponsive galactose‐based diblock copolymers

Thermoresponsive double hydrophilic diblock copolymers poly(2‐(2′‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐b‐poly(6‐O‐methacryloyl‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP) with various compositions and molecular weights were obtained by deprotection of amphiphilic diblock copolymers P(MEO₂MA‐co‐OEGMA)‐b‐poly(6‐O‐methacryloyl‐1,2:3,4‐di‐O‐isopropylidene‐D ‐galactopyranose) (P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP), which were prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization using P(MEO₂MA‐co‐OEGMA) as macro‐RAFT agent. Dynamic light scattering and UV–vis studies showed that the micelles self‐assembled from P(MEO₂MA‐co‐OEGMA)‐b‐PMAlpGP were thermoresponsive. A hydrophobic dye Nile Red could be encapsulated by block copolymers P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP upon micellization and released upon dissociation of the formed micelles under different temperatures. The galactose functional groups in the PMAGP block have specific interaction with HepG2 cells, and P(MEO₂MA‐co‐OEGMA)‐b‐PMAGP has potential applications in hepatoma‐targeting drug delivery and biodetection. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011