表面修饰MnS纳米微粒的结构表征

采用表面修饰的方法 ,以双十八烷基二硫代磷酸盐 (PyDDP)为表面修饰剂 ,制备了双十八烷氧基二硫代磷酸 (DDP)表面修饰的MnS纳米微粒。采用TEM ,DSC ,XRD和FTIR对表面修饰MnS纳米微粒进行结构分析。结果表明 :表面修饰MnS纳米微粒是由DDP表面修饰层和MnS纳米核心所构成 ,微粒尺寸在 5～ 10nm之间 ,无机MnS纳米晶核具有 γ MnS的晶型结构。DDP表面修饰MnS纳米微粒在氯仿、苯和甲苯等有机溶剂中都具有良好的分散性。     

亲油性ZnS纳米微粒的合成

纳米微粒具有小尺寸效应、表面效应、量子效应和宏观量子隧道效应等一系列普通材料所不具备的特性 ,因而引起科技工作者的广泛重视 ,成为材料科学研究的热点 .制备纳米微粒的方法很多 [1～ 7] ,但由于纳米微粒的小尺寸效应及表面效应 ,通常制备的无机纳米微粒极易团聚 ,而且无机纳米微粒的非油溶性使其在摩擦学领域的应用受到很大限制 .本文采用表面修饰 [8～ 11] 方法 ,通过共沉淀的竞争反应 ,制备了表面为有机修饰剂双十六烷基二硫代磷酸 (DDP)修饰的无机 Zn S纳米微粒 ,并用红外光谱、 X射线光电子能谱和透射电子显微镜等分析手段对表…     

ZnO/Ag复合纳米粒子的制备与表征

以乙酸锌为前驱物,乙醇为溶剂,油酸钠为表面修饰剂,采用溶液化学法,在乙醇体系中制得纳米Zn O。然后缓慢加入一定量的硝酸银乙醇溶液,在乙醇的还原作用下将Ag+还原为Ag纳米粒子,制得Zn O/Ag复合纳米粒子。通过紫外-可见吸收光谱(UV-Vis)、荧光光谱(FL)、透射电子显微镜(TEM)和X射线衍射(XRD)等方法对所制备的氧化锌-银复合纳米粒子样品进行表征。结果表明,所合成的Zn O/Ag复合纳米粒子为球形,尺寸为20-30nm且粒径分布较窄。Ag纳米粒子附着于Zn O纳米粒子表面,并起到良好的表面修饰作用。对制备Zn O/Ag复合纳米粒子的机理进行了初步探究。     

亲油性硫化锰纳米微粒的化学制备和结构

采用表面修饰的方法,在醇水体系中制备了双十八烷基二硫代磷酸（DDP）表面修饰的硫化锰（MnS）纳米微粒,用XPS、FTIR、TGA、TEM和HREM等技术对用表面修饰法得到的MnS纳米微粒的结构、化学稳定性和热稳定性进行研究,结果表明：表面修饰得到的MnS纳米微粒有较好的化学稳定性和热稳定性,并且微粒的分散件好、不团聚,制备出的MnS纳米晶核具有γ－MnS的晶型结构。     

光催化还原制备Au/Ag核壳结构纳米粒子及其修饰电极的电催化性能

以Keggin结构硅钨杂多酸H4SiW12O40(SiW12)为光催化还原剂,通过光化学还原法制备Au/Ag核壳结构纳米粒子. 透射电子显微镜分析显示,所得纳米粒子粒径为30～40 nm,呈均匀分散的球形颗粒,该制备方法的特点是可以较好的避免单金属纳米粒子的形成. 将Au/Ag核壳纳米粒子修饰到具有PVP膜的玻碳电极表面,得到SiW12-(Au/Ag)-PVP多层膜修饰电极. 该修饰电极在0.5 mol/L H2SO4介质中具有良好的电化学响应,在0～-0.75 V电位范围内,出现了3对归属于SiW12的氧化还原峰,且电极性能稳定,灵敏度高. 对H2O2的电催化还原性能明显优于单金属Ag纳米粒子修饰电极,说明Au核的存在可以很好的改善Ag的电催化性能,Au和Ag之间存在相互协同催化作用.     

高活性Ag修饰TiO2空心八面体光催化剂的简易模板诱导合成

贵金属修饰的TiO2空心纳米光催化材料由于具有大的比表面积、低的质量密度、良好的表面渗透性、强的光吸收能力以及界面电荷的快速转移,因而表现出优异的光催化性能.为了制备结构可控且精良的贵金属修饰TiO2空心纳米光催化材料,人们先后采用湿化学法、高温固相法、声化学法及光化学沉积法等.由于在制备过程中涉及多种异相材料的合成和结构控制,因此上述合成方法通常需要复杂且多步过程(有些过程甚至很容易导致结构破坏),从而限制了其在光催化领域的实际应用.本文开发了一种简单的模板诱导法,成功制备了Ag纳米粒子修饰的TiO2空心八面体光催化剂.合成过程包括模板指导沉积和原位模板溶解.以Ag2O八面体为模板, TiF4水溶液为前驱体,首先通过TiF4水解形成TiO2纳米粒子沉积在Ag2O模板表面,而TiF4水解产生的酸性HF水溶液可原位溶解碱性的Ag2O模板,从而一步制得TiO2空心八面体.同时,利用Ag2O以及Ag+离子的光敏特性,在光照条件下使Ag2O和Ag+离子生成Ag纳米颗粒,直接沉积在TiO2空心八面体的内外表面,得到Ag/TiO2光催化剂.由此可见,该合成方法具有明显的步骤少的优点.扫描电镜、透射电镜、能量散射和紫外-可见光谱等表征结果表明成功制得内外Ag纳米粒子修饰的TiO2空心八面体光催化剂,其中TiO2空心八面体的壁厚约为25 nm,边长约为1μm,而修饰在其表面的Ag纳米粒子尺寸仅为5–10 nm.此外,通过控制TiF4前驱体浓度,还可制备核壳结构的Ag2O@TiO2八面体以及不同壁厚Ag修饰的TiO2空心八面体,表明该方法在Ag/TiO2形貌合成上的多样性和可控性.为了获得良好的光催化活性,对制备的Ag纳米粒子修饰的TiO2空心八面体光催化剂进行了不同温度的热处理. X射线衍射结果表明,即使在600 oC高温下,制备的Ag/TiO2空心八面体光催化剂依然能够保持原有的特殊形貌和锐钛矿TiO2晶型.该温度明显高于TiO2从锐钛矿向金红石转变的温度.这说明合成的Ag/TiO2能在保持高活性锐钛矿相的同时获得更好的结晶性.这可能是由于分散在TiO2原始晶粒周围的Ag纳米粒子能阻止其进一步长大,从而抑制了其晶型转变.不同样品光催化降解甲基橙的结果表明,经600oC高温热处理的样品表现出最高的光催化活性,相应的反应速率常数为0.11 min？1.这应得益于该光催化剂具有以下三个特点：(1) TiO2空心八面体的薄壁结构能够缩短光照条件下光生电子和空穴从内部扩散到表面的距离;(2)由于贵金属Ag纳米粒子沉积在TiO2薄壁的内外两个表面以及TiO2和Ag形成肖脱基势垒,因此在它们接触的界面上能够发生更快的界面电荷转移;(3)高温处理导致TiO2良好的晶化以及高活性锐钛矿TiO2晶型的保持.     

超声辐射法制备银纳米微粒

在有机介质十氢化萘中,以金属钠、硝酸银和油酸钠为起始原料,通过超声辐射使金属钠和硝酸银发生置换反应,成功制备了油酸表面修饰的Ag纳米微粒.采用透射电子显微镜、X射线粉末衍射仪和热分析仪对其形貌、结构和性能进行了表征.透射电镜和X射线粉末衍射研究表明:所制备的油酸表面修饰Ag纳米微粒粒径较小,平均尺寸为10 nm,分布均匀,无团聚现象,且具有面心立方晶型结构.热分析结果表明:所制备的样品含有约9.7%的有机物,并具有良好的热稳定性能.     

高活性Ag修饰TiO_2空心八面体光催化剂的简易模板诱导合成（英文）

贵金属修饰的Ti O2空心纳米光催化材料由于具有大的比表面积、低的质量密度、良好的表面渗透性、强的光吸收能力以及界面电荷的快速转移,因而表现出优异的光催化性能.为了制备结构可控且精良的贵金属修饰Ti O2空心纳米光催化材料,人们先后采用湿化学法、高温固相法、声化学法及光化学沉积法等.由于在制备过程中涉及多种异相材料的合成和结构控制,因此上述合成方法通常需要复杂且多步过程(有些过程甚至很容易导致结构破坏),从而限制了其在光催化领域的实际应用.本文开发了一种简单的模板诱导法,成功制备了Ag纳米粒子修饰的Ti O2空心八面体光催化剂.合成过程包括模板指导沉积和原位模板溶解.以Ag2O八面体为模板,TiF 4水溶液为前驱体,首先通过Ti F4水解形成Ti O2纳米粒子沉积在Ag2O模板表面,而Ti F4水解产生的酸性HF水溶液可原位溶解碱性的Ag2O模板,从而一步制得Ti O2空心八面体.同时,利用Ag2O以及Ag+离子的光敏特性,在光照条件下使Ag2O和Ag+离子生成Ag纳米颗粒,直接沉积在Ti O2空心八面体的内外表面,得到Ag/Ti O2光催化剂.由此可见,该合成方法具有明显的步骤少的优点.扫描电镜、透射电镜、能量散射和紫外-可见光谱等表征结果表明成功制得内外Ag纳米粒子修饰的Ti O2空心八面体光催化剂,其中TiO 2空心八面体的壁厚约为25 nm,边长约为1μm,而修饰在其表面的Ag纳米粒子尺寸仅为5–10 nm.此外,通过控制Ti F4前驱体浓度,还可制备核壳结构的Ag2O@Ti O2八面体以及不同壁厚Ag修饰的Ti O2空心八面体,表明该方法在Ag/Ti O2形貌合成上的多样性和可控性.为了获得良好的光催化活性,对制备的Ag纳米粒子修饰的Ti O2空心八面体光催化剂进行了不同温度的热处理.X射线衍射结果表明,即使在600 oC高温下,制备的Ag/Ti O2空心八面体光催化剂依然能够保持原有的特殊形貌和锐钛矿Ti O2晶型.该温度明显高于Ti O2从锐钛矿向金红石转变的温度.这说明合成的Ag/Ti O2能在保持高活性锐钛矿相的同时获得更好的结晶性.这可能是由于分散在Ti O2原始晶粒周围的Ag纳米粒子能阻止其进一步长大,从而抑制了其晶型转变.不同样品光催化降解甲基橙的结果表明,经600 oC高温热处理的样品表现出最高的光催化活性,相应的反应速率常数为0.11 min 1.这应得益于该光催化剂具有以下三个特点:(1)TiO 2空心八面体的薄壁结构能够缩短光照条件下光生电子和空穴从内部扩散到表面的距离;(2)由于贵金属Ag纳米粒子沉积在Ti O2薄壁的内外两个表面以及Ti O2和Ag形成肖脱基势垒,因此在它们接触的界面上能够发生更快的界面电荷转移;(3)高温处理导致Ti O2良好的晶化以及高活性锐钛矿Ti O2晶型的保持.     

氧化锌-银复合纳米粒子的制备：吸收光谱和荧光光谱

金属和半导体纳米粒子的制备及性质的研究是当今材料科学和物理化学的热门课题［1－6］．在利用太阳能光降解环境污染物、生物传感器以及光生物等方面这些纳米粒子都具有实际应用的可能性．对纳米粒子表面进行修饰而形成的复合纳米粒子可以有效地调整单一颗粒的表面性质甚至颗粒的稳定性．另外，复合纳米粒子的制备对研究纳米粒子的尺寸量子化效应、非线性光学性质及其它光电性质都有重要的意义．人们已成功地制备了许多复合金属－金属纳米粒子，如Cu－Ag［7］，Ag-Pd［8］及Ag－Pt［9］等．关于复合半导体－半导作纳米粒子也有报导，如C…     

巯萘剂表面修饰的CdS纳米微粒的合成及发光特性

用疏萘剂(TN)作为表面修饰剂,在甲醇溶液中合成了CdS/TN纳米微粒,用TEM测得纳米微粒呈球形,其粒径约10nm,吸收光谱和荧光光谱研究表明,[S^2-]/[TN]浓度比、TN和镉离子的浓度对CdS/TN纳米微粒的粒径及发光特性具有显著影响,且随着条件的改变,CdS/TN纳米微粒的发射波长红移100nm,表现出明显的量子尺寸特性.XPS显示所制得表面修饰纳米微粒的核为CdS.     

表面修饰Ag_2S纳米微粒的合成及摩擦学行为研究

在水醇混合介质中,采用同阳离子共沉淀法合成了有机化合物表面修饰的Ａｇ２Ｓ纳米微粒,在高速钢基底上制备成膜,研究了它的摩擦学特性。结果表明：修饰后的Ａｇ２Ｓ纳米微粒粒径小,性能稳定,在有机介质中分散成透明溶液。ＡｇＤＤＰ膜和Ａｇ２Ｓ ＤＤＰ膜均可显著降低钢基底的摩擦系数。研究证实表面修饰Ａｇ２Ｓ纳米微粒的摩擦作用机制是在较低负荷下表面修饰层起主要作用,在较高负荷下Ａｇ２Ｓ纳米核起主要的承载和减摩抗磨作用。     

银纳米颗粒的合成及用于抗癌药氟他胺的电化学检测（英文）

Ag nanoparticles were synthesized on the surface of a glassy carbon electrode modified with p‐tert‐butylcalix[4]arene and p‐tert‐butylcalix[6]arene by the deposition of Ag+ at an open circuit potential followed by the electrochemical reduction of the Ag+.The presence of the calixarene layer on the electrode surface controlled the particle size and prevented agglomeration.Cyclic voltam‐metry showed that the Ag nanoparticles on the modified glassy carbon electrode had good catalytic ability for the reduction of flutamide.The effects of calixarene concentration,potential applied for the reduction of Ag+,number of calixarene layers,and p H value on the electrocatalytic activity of the Ag nanoparticles were investigated.The modified electrode had a linear range in differential pulse voltammetry of 10-1000 μmol/L with a detection limit of 9.33 μmol/L for flutamide at an S/N = 3.The method was applied to the detection of flutamide in practical samples.     

Fabrication and SERS properties of Ag/Cu2S composite micro-nanostructures over Cu foil

A new kind of Ag/Cu2S composite micro/nanostructures has been prepared via a convenient galvanic reduction method. SEM images of these micro/nanostructures showed that Ag nanoparticles with the size of around 50-100 nm were well deposited on the surface of Cu2S micro/nanostructures. The SEM images also indicated that the Ag nanoparticles were preferentially grown on the big polygonal Cu2S microstructures, which could be explained by a localization of the electrons on the surface of the polygonal Cu2S microstructures after the electron transfer step. Owing to the introduction of Ag nanoparticles on the surface of Cu2S micro/nanostructures, the resulting Ag/Cu2S composite micro-nanostructures could be used as a versatile substrate for surface enhanced Raman scattering.     

Controlled synthesis and self-assembly of highly monodisperse Ag and Ag(2)S nanocrystals

A facile method to control the synthesis and self‐assembly of monodisperse Ag and Ag₂S nanocrystals with a narrow‐size distribution is described. Uniform Ag nanoparticles of less than 4 nm were obtained by thermolysis of Ag–oleate complexes in the presence of oleic acid and dodecylamine, and monodisperse Ag nanoparticles of less than 10 nm were also prepared in one step by using dodecylamine and oleic acid as capping agents. Moreover, the surface‐enhanced Raman scattering (SERS) properties of the Ag substrates have also been investigated. It is worth mentioning that these Ag nanoparticles and assemblies show great differences in the SERS activities of Rhodamine B dye. In addition, the superlattices of Ag₂S nanocrystals were synthesized with Ag–oleate complexes, alkanethiol, and sulfur as the reactants. The resulting highly monodisperse nanocrystals can easily self‐assemble into interesting superstructures in the solution phase without any additional assembly steps. This method may be extended to the size‐controlled preparation and assembly of many other noble‐metal and transition‐metal chalcogenide nanoparticles. These results will aid the study of the physicochemical properties of the superlattice assemblies and construction of functional macroscopic architectures or devices.     

Synthesis and Characterization of Silver Sulfide Nanoparticles Containing Sol-Gel Derived HPC-Silica Film for Ion-Selective Electrode Application

Silver sulfide nanoparticles dispersed in sol-gel derived hydroxypropyl cellulose (HPC)-silica films have been successfully synthesized using H₂S gas diffusion method. This is the first attempt to produce silver sulfide nanoparticles using this technique. Ag₂S nanoparticles are generated through reaction of H₂S gas with AgNO₃ precursor dissolved in the HPC-silica matrix. Transmission electron microscope (TEM) and atomic force microscope (AFM) analysis reveal nanoparticles size distribution from 2.5 nm to 56 nm for H₂S gas exposed sample. The surface chemistry of Ag₂S nanoparticles and sol-gel derived HPC-silica matrix is confirmed by X-ray photoelectron spectroscopy (XPS). The negative shifts in the core-level XPS Ag (3d) binding energy of Ag₂S nanoparticles are attributed to Ag : S surface atomic ratio exhibited by these nanoparticles with varying processing conditions. Following processing and characterization, suitability of the present method to produce silver sulfide ion-selective electrode is demonstrated by depositing Ag₂S nanoparticles on a graphite rod. The high reponse function of the electrode is due to the presence of nanoparticles.     

Fabrication of Ag/Au bimetallic nanoparticles by UPD-redox replacement: Application in the electrochemical reduction of benzyl chloride

The bimetallic Ag/Au nanoparticles were prepared by underpotential deposition-redox replacement technique on the basis of Au nanoparticles modified glassy carbon (GC) electrode. The as-prepared Ag/Au nanoparticles were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The Ag/Au bimetallic nanoparticles modified GC electrode with low-Ag loading exhibits much better catalytic activity for the reduction of benzyl chloride than Ag nanoparticles modified GC electrode. The result is attributed to the synergic effect between Ag and Au in the reduction process. The chronoamperometry test shows that the Ag/Au nanoparticles possess long-term performance in the electrolysis.     

Ag, Ag2S, and Ag2Se nanocrystals: synthesis, assembly, and construction of mesoporous structures

Synthesis of mesoporous materials has become more and more important due to their wide application. Nowadays, there are two main ideas in their preparation. One is focused on the templating method. The other is based on metal-organic frameworks (MOFs) constructed from molecular building blocks. Herein, we exploit a new idea for their facile and general synthesis, namely, using "artificial atoms" (monodisperse nanoparticles) as uniform building blocks to construct ordered mesoporous materials. Mesoporous Ag, Ag2S, and Ag2Se have been obtained to demonstrate this concept. On the other hand, we also describe a facile method to prepare the "building blocks". Ag nanoparticles were obtained by direct thermal decomposition of AgNO3 in octadecylamine, and Ag2S/Ag2Se nanoparticles were synthesized by reaction between sulfur or selenium powder and Ag nanoparticles formed in situ. This approach for Ag, Ag2S, and Ag2Se nanoparticles is efficient, economical, and easy to scale up in industrial production.     

含5-氟尿嘧啶的复合结构纳米颗粒的合成及其光谱研究

合成了包覆有5-氟尿嘧啶的银/二氧化硅复合结构纳米颗粒.用透射电子显微镜、红外光谱和拉曼光谱对合成的化合物进行了表征.讨论了药物分子在银表面的拉曼增强效应以及二氧化硅壳层对它的影响.     

Simple colorimetric detection of dopamine using modified silver nanoparticles

Dopamine(DA) plays an important role in health and peripheral nervous systems. Colorimetric detection of DA has the advantage of color change and simplicity in operation and instrumentation. Herein, we report a highly sensitive and selective colorimetric detection of DA by using two specific ligands modified Ag nanoparticles, where the DA molecules can make dual recognition with high specificity. The colloidal suspension of modified Ag nanoparticles was agglomerated after interacting with DA, while the color of Ag nanoparticles suspension changed from yellow to brown, arising from the interparticle plasmon coupling during the aggregation of Ag nanoparticles. The modified Ag nanoparticles suspension and agglomeration were confirmed by transmission electron microscope images. The optical properties behind the color change were thoroughly investigated by using UV-Vis and Raman techniques. The changes in p H, zeta potential, particle size and surface charge density by adding DA were also determined by using dynamic light scattering measurements. The detection limits of modified Ag probes for DA was calculated to be 6.13′10~(-6) mol L~(-1)(S/N=2.04) and the correlation co-efficient was determined to be 0.9878. Because of the simplicity in operation and instrumentation of the colorimetric method, this work may afford a feasible, fast approach for detecting and monitoring the DA levels in physiological and pathological systems.