Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Tuning the electronic structure of octahedral iron complexes [FeL(X)] (L = 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane,X = Cl,CH(3)O,CN, NO). The S = 1/2 <==>3/2 Spin equilibrium of [FeL(Pr)(NO)

Two new pentadentate, pendent arm macrocyclic ligands of the type 1-alkyl-4,7-bis(4-tert-butyl-2-mercaptobenzyl)-1,4,7-triazacyclononane where alkyl represents an isopropyl, (L(Pr))(2-), or an ethyl group, (L(Et))(2-), have been synthesized. It is shown that they bind strongly to ferric ions generating six-coordinate species of the type [Fe(L(alk))X]. The ground state of these complexes is governed by the nature of the sixth ligand, X: [Fe(III)(L(Et))Cl] (2) possesses an S = 5/2 ground state as do [Fe(III)(L(Et))(OCH(3))] (3) and [Fe(III)(L(Pr))(OCH(3))] (4). In contrast, the cyano complexes [Fe(III)(L(Et))(CN)] (5) and [Fe(III)(L(Pr))(CN)] (6) are low spin ferric species (S = 1/2). The octahedral [FeNO](7) nitrosyl complex [Fe(L(Pr))(NO)] (7) displays spin equilibrium behavior S = 1/2<==>S = (3)/(2) in the solid state. Complexes [Zn(L(Pr))] (1), 4.CH(3)OH, 5.0.5toluene.CH(2)Cl(2), and 7.2.5CH(2)Cl(2) have been structurally characterized by low-temperature (100 K) X-ray crystallography. All iron complexes have been carefully studied by zero- and applied-field M?ssbauer spectroscopy. In addition, Sellmann's complexes [Fe(pyS(4))(NO)](0/1+) and [Fe(pyS(4))X] (X = PR(3), CO, SR(2)) have been studied by EPR and M?ssbauer spectroscopies and DFT calculations (pyS(4) = 2,6-bis(2-mercaptophenylthiomethyl)pyridine(2-)). It is concluded that the electronic structure of 7 with an S = 1/2 ground state is low spin ferrous (S(Fe) = 0) with a coordinated neutral NO radical (Fe(II)-NO) whereas the S = 3/2 state corresponds to a high spin ferric (S(Fe) = 5/2) antiferromagnetically coupled to an NO(-) anion (S = 1). The S = 1/2<==>S = 3/2 equilibrium is then that of valence tautomers rather than that of a simple high spin<==>low spin crossover.     

Tuning of spin crossover behaviour in iron(III) complexes involving pentadentate Schiff bases and pseudohalides

Investigations on a series of eight novel mononuclear iron(III) Schiff base complexes with the general formula [Fe(L(5))(L(1))]·S (where H(2)L(5) = pentadentate Schiff-base ligand, L(1) = a pseudohalido ligand, and S is a solvent molecule) are reported. Several different aromatic 2-hydroxyaldehyde derivatives were used in combination with a non-symmetrical triamine 1,6-diamino-4-azahexane to synthesize the H(2)L(5) Schiff base ligands. The consecutive reaction with iron(III) chloride resulted in the preparation of the [Fe(L(5))Cl] precursor complexes which were left to react with a wide range of the L(1) pseudohalido ligands. The low-spin compounds were prepared using the cyanido ligand: [Fe(3m-salpet)(CN)]·CH(3)OH (1a), [Fe(3e-salpet)(CN)]·H(2)O (1b), while the high-spin compounds were obtained by the reaction of the pseudohalido (other than cyanido) ligands with the [Fe(L(5))Cl] complex arising from salicylaldehyde derivatives: [Fe(3Bu5Me-salpet)(NCS)] (2a), [Fe(3m-salpet)(NCO)]·CH(3)OH (2b) and [Fe(3m-salpet)(N(3))] (2c). The compounds exhibiting spin-crossover phenomena were prepared only when L(5) arose from 2-hydroxy-1-naphthaldehyde (H(2)L(5) = H(2)napet): [Fe(napet)(NCS)]·CH(3)CN (3a, T(1/2) = 151 K), [Fe(napet)(NCSe)]·CH(3)CN (3b, T(1/2) = 170 K), [Fe(napet)(NCO)] (3c, T(1/2) = 155 K) and [Fe(napet)(N(3))], which, moreover, exhibits thermal hysteresis (3d, T(1/2)↑ = 122 K, T(1/2)↓ = 117 K). These compounds are the first examples of octahedral iron(III) spin-crossover compounds with the coordinated pseudohalides. We report the structure and magnetic properties of these complexes. The magnetic data of all the compounds were analysed using the spin Hamiltonian formalism including the ZFS term and in the case of spin-crossover, the Ising-like model was also applied.     

Synthesis, structural characterization, and magnetic studies of polynuclear iron complexes with a new disubstituted pyridine ligand

A series of novel polyiron species have been prepared from the reaction of iron chloride with the 2,5-disubstituted pyridines H2L(n) (H2L1) = N,N'-bis(n-butylcarbamoyl)pyridine-2,6-dicarboxamide; H2L2 = N,N'-bis(n-ethylcarbamoyl)pyridine-2,6-dicarboxamide). By small modifications of the experimental conditions under which the reactions are carried out, it has been possible to prepare the quadruply stranded diiron(II) complex [Fe2(mu-H2L1)4(mu-Cl)2][FeCl4]2 (1), the metallamacrocycle [Fe2(mu-H2L1)2(THF)4Cl2][FeCl4]2 (2), the hexairon(III) compound [Fe6(L1)2(mu-OMe)6(mu4-O)2Cl4] (3), and the mixed-valence trinuclear iron complexes [Fe3(L(n))3(mu3-O)] (n = 1, 4; n = 2, 5). The X-ray crystal structures of 3 and 5 and magnetic studies for all the compounds are herein presented. Interestingly, the structural analysis of 5 at room temperature indicates that one of the iron centers is Fe(III) while the other two have an average valence state between Fe(II) and Fe(III). The five complexes herein presented demonstrate the great versatility that the new ligand has as a building block for the formation of supramolecular coordination assemblies.     

Group 13 β-ketoiminate compounds: gallium hydride derivatives as molecular precursors to thin films of Ga2O3

Bis(β-ketoimine) ligands, [R{N(H)C(Me)-CHC(Me)═O}(2)] (L(1)H(2), R = (CH(2))(2); L(2)H(2), R = (CH(2))(3)), linked by ethylene (L(1)) and propylene (L(2)) bridges have been used to form aluminum, gallium, and indium chloride complexes [Al(L(1))Cl] (3), [Ga(L(n))Cl] (4, n = 1; 6, n = 2) and [In(L(n))Cl] (5, n = 1; 7, n = 2). Ligand L(1) has also been used to form a gallium hydride derivative [Ga(L(1))H] (8), but indium analogues could not be made. β-ketoimine ligands, [Me(2)N(CH(2))(3)N(H)C(R')-CHC(R')═O] (L(3)H, R' = Me; L(4)H, R' = Ph), with a donor-functionalized Lewis base have also been synthesized and used to form gallium and indium alkyl complexes, [Ga(L(3))Me(2)] (9) and [In(L(3))Me(2)] (10), which were isolated as oils. The related gallium hydride complexes, [Ga(L(n))H(2)] (11, n = 3; 12, n = 4), were also prepared, but again no indium hydride species could be made. The complexes were characterized mainly by NMR spectroscopy, mass spectrometry, and single crystal X-ray diffraction. The β-ketoiminate gallium hydride compounds (8 and 11) have been used as single-source precursors for the deposition of Ga(2)O(3) by aerosol-assisted (AA)CVD with toluene as the solvent. The quality of the films varied according to the precursor used, with the complex [Ga(L(1))H] (8) giving by far the best quality films. Although the films were amorphous as deposited, they could be annealed at 1000 °C to form crystalline Ga(2)O(3). The films were analyzed by powder XRD, SEM, and EDX.     

The [Fe(III)[Fe(III)(L1)2]3] star-type single-molecule magnet

Star-shaped complex [Fe(III)[Fe(III)(L1)2]3] (3) was synthesized starting from N-methyldiethanolamine H2L1 (1) and ferric chloride in the presence of sodium hydride. For 3, two different high-spin iron(III) ion sites were confirmed by M?ssbauer spectroscopy at 77 K. Single-crystal X-ray structure determination revealed that 3 crystallizes with four molecules of chloroform, but, with only three molecules of dichloromethane. The unit cell of 3.4CHCl3 contains the enantiomers (delta)-[(S,S)(R,R)(R,R)] and (lambda)-[(R,R)(S,S)(S,S)], whereas in case of 3.3CH2Cl2 four independent molecules, forming pairs of the enantiomers [lambda-(R,R)(R,R)(R,R)]-3 and [lambda-(S,S)(S,S)(S,S)]-3, were observed in the unit cell. According to SQUID measurements, the antiferromagnetic intramolecular coupling of the iron(III) ions in 3 results in a S = 10/2 ground state multiplet. The anisotropy is of the easy-axis type. EPR measurements enabled an accurate determination of the ligand-field splitting parameters. The ferric star 3 is a single-molecule magnet (SMM) and shows hysteretic magnetization characteristics below a blocking temperature of about 1.2 K. However, weak intermolecular couplings, mediated in a chainlike fashion via solvent molecules, have a strong influence on the magnetic properties. Scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) were used to determine the structural and electronic properties of star-type tetranuclear iron(III) complex 3. The molecules were deposited onto highly ordered pyrolytic graphite (HOPG). Small, regular molecule clusters, two-dimensional monolayers as well as separated single molecules were observed. In our STS measurements we found a rather large contrast at the expected locations of the metal centers of the molecules. This direct addressing of the metal centers was confirmed by DFT calculations.     

Iron(III) complexes of tridentate 3N ligands as functional models for catechol dioxygenases: the role of ligand N-alkyl substitution and solvent on reaction rate and product selectivity

A series of iron(III) complexes of the type [Fe(L)Cl3], where L is the variously N-alkyl-substituted bis(pyrid-2-ylmethyl)amine ligand such as bis(pyrid-2-ylmethyl)amine (L1), N,N-bis(pyrid-2-ylmethyl)methylamine (L2), N,N-bis(pyrid-2-ylmethyl)-n-propylamine (L3), N,N-bis(pyrid-2-ylmethyl)-iso-butylamine (L4), N,N-bis(pyrid-2-ylmethyl)-iso-propylamine (L5), N,N-bis(pyrid-2-ylmethyl)cyclohexylamine (L6), and N,N-bis(pyrid-2-ylmethyl)-tert-butylamine (L7), have been isolated and characterized by elemental analysis and spectral and electrochemical methods. The crystal structures of the complexes [Fe(L2)Cl3] 2, [Fe(L3)Cl3] 3, and the complex-substrate adduct [Fe(L5)(TCC)(NO3)] 5a, where TCC2- is the tetrachlorocatecholate dianion, have been determined by single-crystal X-ray crystallography. The complexes [Fe(L2)Cl3] 2 and [Fe(L3)Cl3] 3 possess a distorted octahedral geometry, in which the linear tridentate 3N ligands are cis-facially coordinated to the iron(III) center, and three chloride ions occupy the remaining coordination sites. The replacement of the N-methyl group in 2 by N-n-propyl group as in 3 leads to the formation of the Fe-Npy bonds and also the Fe-Cl bonds located trans to them of different lengths. The catecholate adduct 5a also possesses a distorted octahedral geometry, in which the ligand is cis-facially coordinated to iron(III) center, TCC2- is asymmetrically chelated trans to the two pyridyl moieties of the ligand, and one of the oxygen atoms of the nitrate ion occupies the sixth coordination site. All of the present complexes have been interacted with simple and substituted catechols. The catecholate adducts [Fe(L)(DBC)Cl] and [Fe(L)(DBC)(Sol)]+, where H2DBC is 3,5-di-tert-butylcatechol and Sol=H2O/CH3CN, have been generated in situ, and their spectral and redox properties and dioxygenase activities have been studied in dimethylformamide and dichloromethane solutions. All of the complexes catalyze the cleavage of H2DBC using molecular oxygen to afford both intra- and extradiol cleavage products. The formation of extradiol cleavage products is facilitated by cis-facial coordination of the 3N ligands and availability of vacant coordination site on iron(III) center for dioxygen binding. It is remarkable that the nature of the N-alkyl substituent in 3N ligands controls the regioselectivity of cleavage, with the n-propyl, iso-butyl, iso-propyl, and cyclohexyl groups enhancing the yield of extradiol products (46-68%) in dichloromethane. The rate of oxygenation depends upon the solvent and the Lewis acidity of iron(III) center as modified by the sterically demanding N-alkyl groups-length and degree of substitution. The plot of log (kO2) versus energy of the low-energy DBC2--to-iron(III) LMCT band is linear, demonstrating the importance of the Lewis acidity of the iron(III) center in dictating the rate of the dioxygenase reaction.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Coordination algorithms control molecular architecture: [CuI4(L2)4]4+ grid complex versus [MII2(L2)2X4]y+ side-by-side complexes (M=Mn,Co, Ni,Zn; X=solvent or anion) and [FeII(L2)3][Cl3FeIIIOFeIIICl3

The synthesis and characterisation of a pyridazine-containing two-armed grid ligand L2 (prepared from one equivalent of 3,6-diformylpyridazine and two equivalents of p-anisidine) and the resulting transition metal (Zn, Cu, Ni, Co, Fe, Mn) complexes (1-9) are reported. Single-crystal X-ray structure determinations revealed that the copper(I) complex had self-assembled as a [2 x 2] grid, [Cu(I) (4)(L2)(4)][PF(6)](4).(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25) (2.(CH(3)CN)(H(2)O)(CH(3)CH(2)OCH(2)CH(3))(0.25)), whereas the [Zn(2)(L2)(2)(CH(3)CN)(2)(H(2)O)(2)][ClO(4)](4).CH(3)CN (1.CH(3)CN), [Ni(II) (2)(L2)(2)(CH(3)CN)(4)][BF(4)](4).(CH(3)CH(2)OCH(2)CH(3))(0.25) (5 a.(CH(3)CH(2)OCH(2)CH(3))(0.25)) and [Co(II) (2)(L2)(2)(H(2)O)(2)(CH(3)CN)(2)][ClO(4)](4).(H(2)O)(CH(3)CN)(0.5) (6 a.(H(2)O)(CH(3)CN)(0.5)) complexes adopt a side-by-side architecture; iron(II) forms a monometallic cation binding three L2 ligands, [Fe(II)(L2)(3)][Fe(III)Cl(3)OCl(3)Fe(III)].CH(3)CN (7.CH(3)CN). A more soluble salt of the cation of 7, the diamagnetic complex [Fe(II)(L2)(3)][BF(4)](2).2 H(2)O (8), was prepared, as well as two derivatives of 2, [Cu(I) (2)(L2)(2)(NCS)(2)].H(2)O (3) and [Cu(I) (2)(L2)(NCS)(2)] (4). The manganese complex, [Mn(II) (2)(L2)(2)Cl(4)].3 H(2)O (9), was not structurally characterised, but is proposed to adopt a side-by-side architecture. Variable temperature magnetic susceptibility studies yielded small negative J values for the side-by-side complexes: J=-21.6 cm(-1) and g=2.17 for S=1 dinickel(II) complex [Ni(II) (2)(L2)(2)(H(2)O)(4)][BF(4)](4) (5 b) (fraction monomer 0.02); J=-7.6 cm(-1) and g=2.44 for S= 3/2 dicobalt(II) complex [Co(II) (2)(L2)(2)(H(2)O)(4)][ClO(4)](4) (6 b) (fraction monomer 0.02); J=-3.2 cm(-1) and g=1.95 for S= 5/2 dimanganese(II) complex 9 (fraction monomer 0.02). The double salt, mixed valent iron complex 7.H(2)O gave J=-75 cm(-1) and g=1.81 for the S= 5/2 diiron(III) anion (fraction monomer=0.025). These parameters are lower than normal for Fe(III)OFe(III) species because of fitting of superimposed monomer and dimer susceptibilities arising from trace impurities. The iron(II) centre in 7.H(2)O is low spin and hence diamagnetic, a fact confirmed by the preparation and characterisation of the simple diamagnetic iron(II) complex 8. M?ssbauer measurements at 77 K confirmed that there are two iron sites in 7.H(2)O, a low-spin iron(II) site and a high-spin diiron(III) site. A full electrochemical investigation was undertaken for complexes 1, 2, 5 b, 6 b and 8 and this showed that multiple redox processes are a feature of all of them.     

Initial members of the family of molecular mid-valent high-nuclearity iron nitrides: [Fe4N2X10]4- and [Fe10N8X12]5- (X = Cl-, Br-)

Current theoretical and experimental evidence points toward X = N as the identity of the interstitial atom in the [MoFe7S9X] core of the iron-molybdenum cofactor cluster of nitrogenase. This atom functions with mu6 bridging multiplicity to six iron atoms and, if it is nitrogen as nitride, raises a question as to the existence of a family of molecular iron nitrides of higher nuclearity than known dinuclear Fe(III,IV) species with linear [Fe-N-Fe]5+,4+ bridges. This matter has been initially examined by variation of reactant stoichiometry in the self-assembly systems [FeX4]1-/(Me3Sn)3N (X = Cl-, Br-) in acetonitrile. A 2:1 mol ratio affords [Fe4N2Cl10]4- (1), isolated as the Et4N+ salt (72%). This cluster has idealized C2h symmetry with a planar antiferromagnetically coupled [Fe(III)4(mu3-N)2]6+ core containing an Fe2N2 rhombus to which are attached two FeCl3 units. DFT calculations have been performed to determine the dominant magnetic exchange pathway. An 11:8 mol ratio leads to [Fe10N8Cl12]5- (3) as the Et4N+ salt (37%). The cluster possesses idealized D2h symmetry and is built of 15 edge- and vertex-shared rhomboids involving two mu3-N and six mu4-N bridging atoms, and incorporates two of the core units of 1. Four FeN2Cl2 and four FeN3Cl sites are tetrahedral and two FeN5 sites are trigonal pyramidal. The cluster is mixed-valence (9Fe(III) + Fe(IV)); a discrete Fe(IV) site was not detected by crystallography or M?ssbauer spectroscopy. The corresponding clusters [Fe4N2Br10]4- and [Fe10N8Br12]5- are isostructural with 1 and 3, respectively. Future research is directed toward defining the scope of the family of molecular iron nitrides.     

Acetylide-bridged organometallic oligomers via the photochemical metathesis of methyl-iron(II) complexes

The acetylido methyl iron(II) complexes, cis/trans-[Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1) and trans-[Fe(depe)(2)(C[triple bond]CR)(CH(3))] (2) (dmpe = 1,2-dimethylphoshinoethane; depe = 1,2-diethylphosphinoethane), were synthesized by transmetalation from the corresponding alkyl halide complexes. Acetylido methyl iron(II) complexes were also formed by transmetalation from the chloride complexes, trans-[Fe(dmpe)(2)(C[triple bond]CR)(Cl)] or trans-[Fe(depe)(2)(C[triple bond]CR)(Cl)]. The structure of trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(CH(3))] (1a) was determined by single-crystal X-ray diffraction. The methyl acetylido iron complexes, [Fe(dmpe)(2)(C[triple bond]CR)(CH(3))] (1), are thermally stable in the presence of acetylenes; however, under UV irradiation, methane is lost with the formation of a metal bisacetylide. Photochemical metathesis of cis- or trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CR)] (R = C(6)H(5) (1a), 4-C(6)H(4)OCH(3) (1b)) with terminal acetylenes was used to selectively synthesize unsymmetrically substituted iron(II) bisacetylide complexes of the type trans-[Fe(dmpe)(2)(C[triple bond]CR)(C[triple bond]CR')] [R = Ph, R' = Ph (6a), 4-CH(3)OC(6)H(4) (6b), (t)()Bu (6c), Si(CH(3))(3) (6d), (CH(2))(4)C[triple bond]CH (6e); R = 4-CH(3)OC(6)H(4), R' = 4-CH(3)OC(6)H(4), (6g), (t)()Bu (6h), (CH(2))(4)C[triple bond]CH (6i), adamantyl (6j)]. The structure of the unsymmetrical iron(II) bisacetylide complex trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(5))(C[triple bond]CC(6)H(4)OCH(3))] (6b) was determined by single-crystal X-ray diffraction. The photochemical metathesis of the bis-acetylene, 1,7-octadiyne, with trans-[Fe(dmpe)(2)(CH(3))(C[triple bond]CPh)] (1a), was utilized to synthesize the bridged binuclear species trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (11). The trinuclear species trans,trans,trans-[(C(6)H(5)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(mu-C[triple bond]C(CH(2))(4)C[triple bond]C)Fe(dmpe)(2)(C[triple bond]CC(6)H(5))] (12) was synthesized by the photochemical reaction of Fe(dmpe)(2)(C[triple bond]CPh)(C[triple bond]C(CH(2))(4)C[triple bond]CH) (6e) with Fe(dmpe)(2)(CH(3))(2). Extended irradiation of the bisacetylide complexes with phenylacetylene resulted in insertion of the terminal alkyne into one of the metal acetylide bonds to give acetylide butenyne complexes. The structure of the acetylide butenyne complex, trans-[Fe(dmpe)(2)(C[triple bond]CC(6)H(4)OCH(3))(eta(1)-C(C(6)H(5))=CH(C[triple bond]CC(6)H(4)OCH(3)))] (9a) was determined by single-crystal X-ray diffraction.     

Iron(III) activation hits a [4 + 4] macrocycle

The tetranuclear complex [Fe(III)2(L')(OH)(CH3O)]2, 1, has been synthesised from the reaction of either ferrous [in excess as 4:1 or stoichiometric 2:1 iron(II) : H4L] or ferric ions [4:1 iron(III) : H4L] with the large macrocycle, H4L, using aerobic conditions in methanol in the presence of triethylamine. The structure of 1 was determined by single-crystal X-ray diffraction. These reaction conditions lead to the modification of the original macrocycle through the incorporation of a methylene group between two amine groups to give an imidazolidine ring in (L')4-. The controlled addition of formaldehyde into the reaction system results in a significantly improved yield of 1, suggesting that it is involved in the reaction mechanism. The (L')4- macrocycle binds to two, well-separated, iron(III) centres [Fe(1)...Fe(1a) > 8 A]. Each iron(III) centre is further linked via hydroxy and methoxy bridges to equivalent iron(iii) centres contained in a second macrocycle. Overall this gives a structure containing two {Fe(OH)(CH(3)O)Fe} dimers [Fe(1)...Fe(2)ca. 3.2 A] sandwiched by two (L')4- macrocycles. The complex was further characterised by SQUID magnetic measurements and can be interpreted in terms of two isolated antiferromagnetically coupled Fe(III) dimers (J=-23.75 K).     

Low-temperature UV-visible and NMR spectroscopic investigations of O(2) binding to ((6)L)Fe(II), a ferrous heme bearing covalently tethered axial pyridine ligands

In this report, we describe the reversible dioxygen reactivity of ((6)L)Fe(II) (1) [(6)L = partially fluorinated tetraphenylporphyrin with covalently appended TMPA moiety; TMPA = tris(2-pyridylmethyl)amine] using a combination of low-temperature UV-vis and multinuclear ((1)H and (2)H) NMR spectroscopies. Complex 1, or its pyrrole-deuterated analogue ((6)L-d(8))Fe(II) (1-d(8)), exhibits downfield shifted pyrrole resonances (delta 28-60 ppm) in all solvents utilized [CH(2)Cl(2), (CH(3))(2)C(O), CH(3)CN, THF], indicative of a five-coordinate high-spin ferrous heme, even when there is no exogenous axial solvent ligand present (i.e., in methylene chloride). Furthermore, ((6)L)Fe(II) (1) exhibits non-pyrrolic upfield and downfield shifted peaks in CH(2)Cl(2), (CH(3))(2)C(O), and CH(3)CN solvents, which we ascribed to resonances arising from the intra- or intermolecular binding of a TMPA-pyridyl arm to the ferrous heme. Upon exposure to dioxygen at 193 K in methylene chloride, ((6)L)Fe(II) (1) [UV-vis: lambda(max) = 433 (Soret), 529 (sh), 559 nm] reversibly forms a dioxygen adduct [UV-vis: lambda(max) = 422 (Soret), 542 nm], formulated as the six-coordinate low-spin [delta(pyrrole) 9.3 ppm, 193 K] heme-superoxo complex ((6)L)Fe(III)-(O(2)(-)) (2). The coordination of the tethered pyridyl arm to the heme-superoxo complex as axial base ligand is suggested. In coordinating solvents such as THF, reversible oxygenation (193 K) of ((6)L)Fe(II) (1) [UV-vis: lambda(max) = 424 (Soret), 542 nm] also occurs to give a similar adduct ((6)L)Fe(III)-(O(2)(-)) (2) [UV-vis: lambda(max) = 418 (Soret), 537 nm. (2)H NMR: delta(pyrrole) 8.9 ppm, 193 K]. Here, we are unable to distinguish between a bound solvent ligand or tethered pyridyl arm as axial base ligand. In all solvents, the dioxygen adducts decompose (thermally) to the ferric-hydroxy complex ((6)L)Fe(III)-OH (3) [UV-vis: lambda(max) = 412-414 (Soret), 566-575 nm; approximately delta(pyrrole) 120 ppm at 193 K]. This study on the O(2)-binding chemistry of the heme-only homonuclear ((6)L)Fe(II) (1) system lays the foundation for a more complete understanding of the dioxygen reactivity of heterobinuclear heme-Cu complexes, such as [((6)L)Fe(II)Cu(I)](+), which are models for cytochrome c oxidase.     

Fe(II) and Fe(III) mononuclear complexes with a pentadentate ligand built on the 1,3-diaminopropane unit. Structures and spectroscopic and electrochemical properties. Reaction with H2O2

Two new iron complexes, [L(5)(3)Fe(II)Cl]PF(6) (1.PF(6)) and [(L(5)(3)H(+))Fe(III)Cl(3)]PF(6) (2.PF(6)), were synthesized (L(5)(3) = N-methyl-N,N',N'-tris(2-pyridylmethyl)propane-1,3-diamine), and their molecular structures were determined by X-ray crystallography. Their behavior in solution was studied by UV-vis spectroscopy and electrochemistry. Upon addition of a base to an acetonitrile solution of 2, the new unsymmetrical dinuclear complex [L(5)(3)Fe(III)OFe(III)Cl(3)](+) was detected. Treating 1 with hydrogen peroxide has allowed us to detect the low spin [L(5)(3)Fe(III)OOH](2+). Its spectroscopic properties (UV-vis, EPR and resonance Raman) are similar to those reported for related FeOOH complexes obtained with amine/pyridine ligands. Using stopped-flow absorption spectroscopy, the formation and degradation of [L(5)(3)Fe(III)OOH](2+) has been monitored, and a mechanism is proposed to reproduce the kinetic data.     

Molecular and electronic structures of iron complexes containing N,S-coordinated,open-shell o-iminothionebenzosemiquinonate(1-) pi radicals

The reaction of the dinuclear species (mu-NH,NH)[Fe(III)(L(IP))(L(AP))](2) dissolved in CH(2)Cl(2) with dioxygen affords black microcrystals of diamagnetic (mu-S,S)[Fe(III)(L(IP))(L(ISQ))](2).n-hexane (6) upon the addition of n-hexane, where (L(IP))(2)(-) represents the dianion of 4,6-di-tert-butyl-2-aminothiophenol, (L(AP))(-) is the corresponding monoanion, and (L(ISQ))(-) is the corresponding o-iminothionebenzosemiquinonate(1-) pi radical monoanion; similarly, the dianion ('H(2)N(2)S(2)')(2)(-) is derived from 1,2-ethanediamine-N,N'-bis(2-benzenethiol), and ('N(2)S(2)(*)')(3)(-) is its monoradical trianion. The above reaction in a CH(2)Cl(2)/CH(3)OH (1:1) mixture yields the diamagnetic isomer (mu-NH,NH)[Fe(III)(L(IP))(L(ISQ))](2).5CH(3)OH (7), whereas air oxidation of (mu-S,S)[Fe(II)('H(2)N(2)S(2)')](2) in CH(3)CN yields diamagnetic (mu-S,S)[Fe(III)('N(2)S(2)(*)')](2) (8). Complexes 6 and 8 were shown to undergo addition reactions with phosphines, phosphites, or cyanide affording the following complexes: trans-[Fe(II)(L(ISQ))(2)(P(OPh)(3))] (9; S(t) = 0) and [N(n-Bu)(4)][Fe(II)(L(ISQ))(2)(CN)] (S(t) = 0). Oxidation of 6 in CH(2)Cl(2) with iodine, bromine, and chlorine respectively yields black microcrystals of [Fe(III)(L(ISQ))(2)X] (X = I, Br, or Cl) with S(t) = (1)/(2). The structures of complexes 6-9 have been determined by X-ray crystallography at 100 K. The oxidation level of the ligands and iron ions in all complexes has been unequivocally established, as indicated by crystallography; electron paramagnetic resonance, UV-vis, and M?ssbauer spectroscopies; and magnetic-susceptibility measurements. The N,S-coordinated o-iminothionebenzosemiquinonate(1-) pi radicals have been identified in all new complexes. The electronic structures of the new complexes have been determined, and it is shown that no evidence for iron oxidation states >III is found in this chemistry.     

Kinetics and mechanism of a catalytic chloride ion effect on the dissociation of model siderophore hydroxamate-iron(III) complexes

Proton-driven ligand dissociation kinetics in the presence of chloride, bromide, and nitrate ions have been investigated for model siderophore complexes of Fe(III) with the mono- and dihydroxamic acid ligands R(1)C(=O)N(OH)R(2) (R(1) = CH(3), R(2) = H; R(1) = CH(3), R(2) = CH(3); R(1) = C(6)H(5), R(2) = H; R(1) = C(6)H(5), R(2) = C(6)H(5)) and CH(3)N(OH)C(=O)[CH(2)](n)C(=O)N(OH)CH(3) (H(2)L(n); n = 2, 4, 6). Significant rate acceleration in the presence of chloride ion is observed for ligand dissociation from the bis(hydroxamate)- and mono(hydroxamate)-bound complexes. Rate acceleration was also observed in the presence of bromide and nitrate ions but to a lesser extent. A mechanism for chloride ion catalysis of ligand dissociation is proposed which involves chloride ion dependent parallel paths with transient Cl(-) coordination to Fe(III). The labilizing effect of Cl(-) results in an increase in microscopic rate constants on the order of 10(2)-10(3). Second-order rate constants for the proton driven dissociation of dinuclear Fe(III) complexes formed with H(2)L(n)() were found to vary with Fe-Fe distance. An analysis of these data permits us to propose a reactive intermediate of the structure (H(2)O)(4)Fe(L(n)())Fe(HL(n))(Cl)(OH(2))(2+) for the chloride ion dependent ligand dissociation path. Environmental and biological implications of chloride ion enhancement of Fe(III)-ligand dissociation reactions are presented.     

尾式金属卟啉配合物的研究IV: 含氮配体与尾式铁(III)卟啉轴向配位反应热力学及其配位模式

用分光光度法研究了咪唑或吡啶类配体与5-[邻-(4-(1-咪唑基)丁氧基)苯基]-10,15,20-三苯基卟啉合铁(III)氯化物[[Fe^I^I^I(ImTPP)]Cl]和5-[对-(4-(3-吡啶氧基)丁氧基)苯基]10,15,20-三苯基卟啉合铁(III)氯化物[[Fe^I^I^I(PyTPP)]Cl]两种尾式铁(III)卟啉的轴向加合作用, 测定了平衡常数、热力学参数及含氮配体的加合分子数。结果表明, [Fe^I^I^I(PyTPP)Cl与[Fe^I^I^I(TPP)]Cl相类似, 均与咪唑、吡啶类配体生成1:2低自旋六配位加合物。含氮配体与[Fe^I^I^I(ImTPP)]Cl的轴向加合反应平衡常数比与{Fe^I^I^I(TPP)]Cl相应的平衡常数大10-10^3倍, 这是因为含氮配体与[Fe^I^I^I(ImTPP)]Cl的轴向配位诱导了尾端咪唑基与配合物中的Fe^I^I^I离子的轴向配位, 这种配位横式增强了含氮配体与Fe^I^I^I离子的键合; 尾端咪唑基与配合物中的Fe^I^I^I离子配位的模式得到了UV-vis、^1H NMR及EPR实验数据的进一步证实。     

Bis(pyrazol-1-yl)acetates as tripodal heteroscorpionate ligands in iron chemistry: syntheses and structures of iron(II) and iron(III) complexes with bpza, bdmpza, and bdtbpza ligands

The molecular structure of the previously reported species "[Fe(bdtbpza)Cl]" has been revealed by X-ray structure determination to be a ferrous dimer [Fe(bdtbpza)Cl](2) (2c) [bdtbpza = bis(3,5-di-tert-butylpyrazol-1-yl)acetate]. The syntheses of ferrous 2:1 complexes [Fe(bpza)(2)] (3a) and [Fe(bdtbpza)(2)] (3c) as well as ferric 1:1 complexes [NEt(4)][Fe(bpza)Cl(3)] (4a) and [NEt(4)][Fe(bdmpza)Cl(3)] (4b) [bpza = bis(pyrazol-1-yl)acetate, bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] are reported. Complexes 3a, previously reported [Fe(bdmpza)(2)] (3b), and 3c are high-spin. No spin crossover to the low-spin state was observed in the temperature range of 5-350 K. 4a and 4b are synthesized in one step and in high yield from [NEt(4)](2)[Cl(3)FeOFeCl(3)]. 4a and 4b are iron(III) high-spin complexes. Crystallographic information: 2c (C(24)H(39)ClFeN(4)O(2).CH(2)Cl(2).CH(3)CN) is triclinic, P1, a = 12.171(16) A, b = 12.851(14) A, c = 13.390(13) A, alpha = 98.61(9) degrees, beta = 113.51(11) degrees, gamma = 108.10(5) degrees, Z = 2; 3a (C(8)H(7)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 7.4784(19) A, b = 7.604(3) A, c = 16.196(4) A, beta = 95.397(9) degrees, Z = 4; 3c (C(24)H(39)Fe(0.5)N(4)O(2)) is monoclinic, P2(1)/n, a = 9.939(6) A, b = 18.161(10) A, c = 13.722(8) A, beta = 97.67(7) degrees, Z = 4; 4b (C(20)H(35)Cl(3)FeN(5)O(2)) is monoclinic, C2/c, a = 30.45(6) A, b = 12.33(2) A, c = 16.17(3) A, beta = 118.47(5) degrees, Z = 8.     

Mononuclear Ni(III) complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]0/1- (L = thiolate, selenolate, CH2CN, Cl, PPh3): relevance to the nickel site of [NiFe] hydrogenases

The stable mononuclear Ni(III)-thiolate complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]- (L = SePh (2), Cl (3), SEt (4), 2-S-C4H3S (5), CH2CN (7)) were isolated and characterized by UV-vis, EPR, IR, SQUID, CV, 1H NMR, and single-crystal X-ray diffraction. The increased basicity (electronic density) of the nickel center of complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]- modulated by the monodentate ligand L and the substituted groups of the phenylthiolate rings promotes the stability and reactivity. In contrast to the irreversible reduction at -1.17 V (vs Cp2Fe/Cp2Fe+) for complex 3, the cyclic voltammograms of complexes [NiIII(SePh)(P(o-C6H4S)3)]-, 2, 4, and 7 display reversible NiIII/II redox processes with E(1/2) = -1.20, -1.26, -1.32, and -1.34 V (vs Cp2Fe/Cp2Fe+), respectively. Compared to complex 2 containing a phenylselenolate-coordinated ligand, complex 4 with a stronger electron-donating ethylthiolate coordinated to the Ni(III) promotes dechlorination of CH2Cl2 to yield complex 3 (kobs = (6.01 +/- 0.03) x 10-4 s-1 for conversion of complex 4 into 3 vs kobs = (4.78 +/- 0.02) x 10-5 s-1 for conversion of complex 2 into 3). Interestingly, addition of CH3CN into complex 3 in the presence of sodium hydride yielded the stable Ni(III)-cyanomethanide complex 7 with a NiIII-CH2CN bond distance of 2.037(3) A. The NiIII-SEt bond length of 2.273(1) A in complex 4 is at the upper end of the 2.12-2.28 A range for the NiIII-S bond lengths of the oxidized-form [NiFe] hydrogenases. In contrast to the inertness of complexes 3 and 7 under CO atmosphere, carbon monoxide triggers the reductive elimination of the monodentate chalcogenolate ligand of complexes 2, 4, and 5 to produce the trigonal bipyramidal complex [NiII(CO)(P(C6H3-3-SiMe3-2-S)3]- (6).     

Heptanuclear high-spin complex compounds based on S-donors

The precursors [Fe(III)(^SYL)Cl] (^SYLH₂) = N,N′-bis(1-hydroxy-Y-2-benzyliden)-1,6-diamino-3-thiohexane, (Y = H, 3EtO, 5Me) are high-spin (S = 5/2) complexes. The precursors are combined with [Fe(II)(CN)₆]⁴⁻ and [Co(III)(CN)₆]³⁻ to yield star-shaped heptanuclear clusters, [Fe(II)(CN–Fe(III)^SYL)₆]Cl₂ and [Co(III)(CN–Fe(III)^SYL)₆]Cl₃. The star-shaped compounds are high-spin (HS) systems at room temperature. On cooling to 20 K some of the iron(III) centers perform some HS–HS transition.