Pr4S3[Si2O7] und Pr3Cl3[Si2O7]: Durch weiche Fremdanionen modifizierte Derivate von Praseodymdisilicat

Pr₄S₃[Si₂O₇] and Pr₃Cl₃[Si₂O₇]: Derivatives of Praseodymium Disilicate Modified by Soft Foreign Anions For synthesizing both the disilicate derivatives Pr₄S₃[Si₂O₇] and Pr₃Cl₃[Si₂O₇], Pr, Pr₆O₁₁ and SiO₂ are brought to reaction with S and PrCl₃, respectively, in suitable molar ratios (850 °C, 7 d) in evacuated silica tubes. By using NaCl as a flux, Pr₄S₃[Si₂O₇] crystallizes as pale green, transparent single crystals (tetragonal, I4₁/amd, a = 1201.6(1), c = 1412.0(2) pm, Z = 8) with the appearance of slightly compressed octahedra. On the other hand, Pr₃Cl₃[Si₂O₇] emerges as pale green, transparent platelets and crystallizes monoclinically (space group: P2₁, a = 530.96(6), b = 1200.2(1), c = 783.11(8) pm, β = 109.07(1)°, Z = 2). In both crystal structures ecliptically conformed [Si₂O₇]^6– units of two corner‐linked [SiO₄] tetrahedra with Si–O–Si bridging angles of 131° in the sulfide and 148° in the chloride disilicate are present. In Pr₄S₃[Si₂O₇] both crystallographically independent Pr³⁺ cations show coordination numbers of 8 + 1 (5 S^2– and 3 + 1 O^2–) and 9 (3 S^2– and 6 O^2–). For Pr1, Pr2 and Pr3 in Pr₃Cl₃[Si₂O₇] coordination numbers of 10 (5 Cl^– and 5 O^2–) and 9 (2 ×; 4 Cl^– and 5 O^2– or 3 Cl^– and 6 O^2–, respectively) occur.     

Die neuen Schichtsilicate Ba3Si6O9N4 und Eu3Si6O9N4

The New Layer‐Silicates Ba₃Si₆O₉N₄ and Eu₃Si₆O₉N₄ The new oxonitridosilicate Ba₃Si₆O₉N₄ has been synthesized in a radiofrequency furnace starting from BaCO₃, amorphous SiO₂ and Si₃N₄. The reaction temperature was at about 1370 °C. The structure of the colorless compound has been determined by single‐crystal X‐ray diffraction analysis (Ba₃Si₆O₉N₄, space group P3 (no. 143), a = 724.9(1) pm, c = 678.4(2) pm, V = 308.69(9)· 10⁶ pm³, Z = 1, R1 = 0.0309, 1312 independent reflections, 68 refined parameters). The compound is built up of corner sharing SiO₂N₂ tetrahedra forming corrugated layers between which the Ba²⁺ ions are located. Substitution of barium by europium leads to the isotypic compound Eu₃Si₆O₉N₄. Because no single‐crystals could be obtained, a Rietveld refinement of the powder diffractogram was conducted for the structure refinement (Eu₃Si₆O₉N₄, space group P3 (no. 143), a = 711.49(1) pm, c = 656.64(2) pm, V = 287.866(8) ·10⁶ pm³, R_p = 0.0379, R_F² = 0.0638). The ²⁹Si MAS‐NMR spectrum of Ba₃Si₆O₉N₄ shows two resonances at ?64.1 and ?66.0 ppm confirming two different crystallographic Si sites.     

Salt-inclusion synthesis of two new polar solids, Ba6Mn4Si12O34Cl3 and Ba6Fe5Si11O34Cl3

A new family of salt-containing, mixed-metal silicates (CU-14), Ba6Mn4Si12O34Cl3 (1) and Ba6Fe5Si11O34Cl3 (2), was synthesized via the BaCl2 salt-inclusion reaction. These compounds crystallize in the noncentrosymmetric (NCS) space group Pmc2(1) (No. 26), adopting 1 of the 10 NCS polar, nonchiral crystal classes, mm2 (C2v). The cell dimensions are a = 6.821(1) A, b = 9.620(2) A, c = 13.172(3) A, and V = 864.4(3) A3 for 1 and a = 6.878(1) A, b = 9.664(2) A, c = 13.098(3) A, and V = 870.6(3) A3 for 2. The structures form a composite framework made of the (M(4+x)Si(12-x)O34)9- (M = Mn, x = 0; M = Fe, x = 1) covalent oxide and (Ba6Cl3)9+ ionic chloride sublattices. The covalent framework exhibits a pseudo-one-dimensional channel where the extended barium chloride lattice (Ba3Cl1.5)(infinity) resides, and it consists of fused eight-membered meta-silicate rings propagating along [100] via sharing two opposite [Si2O7]6- units to form an acentric lattice. Single-crystal structure studies also reveal the ClBa4 unit adopting an interesting seesaw configuration, in which the lone pair electrons of chlorine preferentially face the oxide anions of the transition metal silicate channel, thus forming the observed polar frameworks. Similar to the synthesis of organic-inorganic hybrid materials, the salt-inclusion method facilitates a promising approach for the directed synthesis of special framework solids, including NCS compounds, via composite lattices.     

Solubility of H2S in ionic liquids [hmim][PF6], [hmim][BF4], and [hmim][Tf2N]

The solubility of hydrogen sulphide in three ionic liquids, viz. 1-hexyl-3-methylilmidazolium hexafluorophosphate ([hmim][PF₆]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim][BF₄]), and 1-hexyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([hmim][Tf₂N]), at temperatures ranging from 303.15 K to 343.15 K and pressures up to 1.1 MPa were determined. The solubility values were correlated using the Krichevsky–Kasarnovsky equation and Henry’s constants were obtained at different temperatures. Partial molar thermodynamic functions of solvation such as standard Gibbs free energy, enthalpy, and entropy were calculated from the solubility results. Comparison of the values obtained show that the solubility of H₂S in these three ionic liquids was in the sequence: [hmim][BF₄] > [hmim][PF₆] ≈ [hmim][Tf₂N].     

Sm4S3[Si2O7] und NaSm9S2[SiO4]6: Zwei Sulfidsilicate mit dreiwertigem Samarium

Sm₄S₃[Si₂O₇] and NaSm₉S₂[SiO₄]₆: Two Sulfide Silicates with Trivalent Samarium The sulfide silicates Sm₄S₃[Si₂O₇] and NaSm₉S₂[SiO₄]₆ are obtained as light yellow transparent crystals by the reaction of Sm, Sm₂O₃, S, and SiO₂ with fluxing SmCl₃ or NaCl, respectively, in suitable molar ratios in fused evacuated silica tubes (850 °C, 7 d). Tetragonal crystals of Sm₄S₃[Si₂O₇] (I4₁/amd; Z = 8; a = 1186.4(1); c = 1387.0(2) pm) with ecliptically conformed [Si₂O₇]^6–‐groups of corner sharing [SiO₄]‐tetrahedra are formed. These double tetrahedra as well the sulfide anions (S^2–) coordinate two crystallographically independent metal cations. They provide coordination numbers of 8 + 1 (5 S^2– and 3 + 1 O^2–) for Sm1 and 9 (3 S^2– and 6 O^2–) for Sm2. NaSm₉S₂[SiO₄]₆ crystallizes hexagonally (P6₃/m; Z = 1; a = 975.32(9); c = 676.46(7) pm) in a modified bromapatite‐type structure. The coordination spheres about the two crystallographically different Sm³⁺ cations are built up by oxygen atoms of the orthosilicate units ([SiO₄]^4–) and sulfide anions (S^2–). As a result, Sm1 and Sm2 have coordination numbers of 9 and 8, respectively. Na⁺ and (Sm1)³⁺ occupy the position 4 f in a molar ratio of 1 : 3 whereas the lower coordinated (Sm2)³⁺ occupies the 6 h position.     

Ternary metal borides [La,Ce,Pr,Nd,Sm] Os4B4 and [Y,La,Ce,Pr,Nd,Sm,Gd,Tb] Ir4B4 with NdCo4B4-type structure

New ternary metal borides with compositionR. E. T ₄B₄ (R. E.=rare earth metal,T=transition metal) have been synthesized within the systems [La,Ce,Pr,Nd,Sm]–Os–B and [Y, La, Ce, Pr, Nd, Sm, Gd, Tb]–Ir–B. All compounds were found to be crystallizing with NdCo₄B₄-type structure. Magnetic measurements (80–300 K,Curie-Weiss behaviour, _p ~ 16K and µ_eff=9.94µ_B for TbIr₄B₄) indicate Y andR. E. elements (except Ce) to be trivalent in these compounds. The crystal chemistry of the isotypic series [Y,R. E.] [Os,Ir]₄B₄ is discussed.

---

Ternäre Metallboride. [La,Ce,Pr,Nd,Sm] Os₄B₄ und [Y,La,Ce,Pr,Nd,Sm,Gd,Tb] Ir₄B₄ mit NdCo₄B₄-Struktur

Zusammenfassung Es wurden neue Metallboride der ZusammensetzungR. E. T ₄B₄ (R. E.=Seltenerdmetall,T=Übergangsmetall) innerhalb der Systeme [La,Ce, Pr,Nd,Sm]–Os–B und [Y,La,Ce,Pr,Nd,Sm,Gd,Tb]–Ir–B hergestellt. Alle Verbindungen kristallisieren entsprechend dem NdCo₄B₄-Typ. Magnetische Messungen (80–300K,Curie-Weiss-Verhalten, _p ~ 16K und µ_eff=9.94µ_B für TbIr₄B₄) zeigen an daß Y und dieR. E.-Elemente (ausgenommen Ce) in diesen Verbindungen trivalent sind. Die Kristallchemie der isotypen [Y,R. E.][Os,Ir]₄B₄-Verbindungen wird diskutiert.

     

Zur solvensfreien Darstellung von Tetramethylammoniumsalzen: Synthese und Charakterisierung von [N(CH3)4]2[C2O4], [N(CH3)4][CO3(CH3)], [N(CH3)4][NO2], [N(CH3)4][CO2H] und [N(CH3)4][O2C(CH2)2CO2(CH3)]

Solvent-free Synthesis of Tetramethylammonium Salts: Synthesis and Characterization of [N(CH₃)₄]₂[C₂O₄], [N(CH₃)₄][CO₃CH₃], [N(CH₃)₄][NO₂], [N(CH₃)₄][CO₂H], and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] A general procedure to synthesize tetramethylammonium salts is presented. Several tetramethylammonium salts were prepared in a crystalline state by solvent-free reaction of trimethylamine and different methyl compounds at mild conditions: [N(CH₃)₄]₂[C₂O₄] (cubic; a = 1 114.8(3) pm), [N(CH₃)₄][CO₃CH₃] (P2₁/n; a = 813.64(3), b = 953.36(3), c = 1 131.3(4) pm, β = 90.03(1)°), [N(CH₃)₄][NO₂] (Pmmn; a = 821.2(4), b = 746.5(3), c = 551.5(2) pm), [N(CH₃)₄][CO₂H] (Pmmn; a = 792.8(7), b = 791.7(3), c = 563.3(4) pm) and [N(CH₃)₄][O₂C(CH₂)₂CO₂CH₃] (P2₁; a = 731.1(2), b = 826.4(3), c = 1 025.2(3) pm, β = 110.1(1)°). The tetramethylammonium salts were characterized by IR-spectroscopy and X-ray diffraction. The crystal structures of the methylcarbonate and the nitrite are described.     

Flux synthesis, crystal structures, and luminescence properties of salt-inclusion lanthanide silicates: [K9F2][Ln3Si12O32] (Ln = Sm, Eu, Gd)

New salt-inclusion lanthanide silicates, [K 9F 2][Ln 3Si 12O 32] (Ln = Sm, Eu, Gd), have been synthesized using a KF-MoO 3 flux, and structurally characterized by single-crystal and powder X-ray diffraction. The structures of these three isostructural compounds consist of open-branched funfer silicate single layers with six-, eight-, and twelve-membered rings, which are connected via LnO 6 octahedra to form a 3-D framework. The F (-) and K (+) ions are located in the structural channels and form a F 2K 7 dimer with a structure similar to that of Cl 2O 7. The photoluminescence properties of the Eu compound have also been studied. The sharp peaks in the room-temperature emission spectrum are assigned and the relative intensities of the (5)D 0 --> (7)F 1 and (5)D 0 --> (7)F 2 transitions are consistent with the crystallography results. Crystal data for the Eu compound: triclinic, space group P1 (No. 2), a = 6.8989(2) A, b = 11.3834(4) A, c = 11.4955(4) A, alpha = 87.620(2) degrees , beta = 89.532(2) degrees , gamma = 80.221(2) degrees , and Z = 2. Crystal data for the Sm compound: The same as those for the Eu compound except a = 6.9152(6) A, b = 11.400(1) A, c = 11.531(1) A, alpha = 87.610(1) degrees , beta = 89.445(1) degrees , and gamma = 80.081(1) degrees .     

Stability of nitrogen-oxygen cages N12O2, N14O2, N14O3, and N16O4

Molecules consisting entirely of nitrogen have been studied extensively for their potential as high energy density materials (HEDM). However, many such molecules are too unstable to serve as practical energy sources. This has prompted many studies of molecules that are mostly nitrogen but which incorporate heteroatoms into the structure to provide additional stability. In the current study, cages of three-coordinate nitrogen are viewed as candidates for stabilization by insertion of oxygen atoms into the nitrogen framework. Cages of N12, N14, and N16 with four-membered rings are studied because four-membered rings have been previously shown to be a destabilizing influence. Insertion of oxygen atoms, which converts N-N bonds to N-O-N bonding groups, relieves ring strain and can potentially result in stable molecules. These molecules are studied by theoretical calculations, using Hartree-Fock and Moller-Plesset (MP3 and MP4) theories, to determine the dissociation energies of the molecules. The primary result of the study is that stable molecules can result from oxygen insertion but that oxygen-oxygen proximity destabilizes the insertion products.     

New efficient synthesis of [Ul4(meCN)4]. X-ray crystal structures of [Ul2(MeCN)7][Ul6], [Ul4(py)3], and [U(dmf)9]l4

Reaction of UCl4 and excess Me3Sil in acetonitrile provides a convenient route to [Ul4(MeCN)4] (1), which was isolated in excellent yield and crystallized in acetonitrile as the ion pair complex [Ul2(MeCN)7][Ul6] (2). Compound 1 was transformed in pyridine (py) and dimethylformamide (dmf) into the Lewis base adducts [Ul4(py)3] (3) and [Ul4(dmf)6] (4). Crystals of 3 and [U(dmf)9]l4 (5) were obtained by slow diffusion of diethyl ether into pyridine or dmf solutions of 1; compound 5 is the first tetracationic {U4+} entity to have been crystallographically characterized.     

Preparation,crystal structure,and infrared characterization of the first thiocyanato-oxy-antimonate(III) [(CH3)4N]2[Sb6O4(NCS)12]

The salt [(CH₃)₄N]₂[Sb₆O₄(NCS)₁₂] is the first identified thiocyanato-oxy-antimonate(III) complex. Reported are details of the synthesis, relevant infrared data and its x-ray structure. The compound crystallizes in the triclinic space group P1 with Z = 2 (C₁₀H₁₂N₇O₂S₆Sb₃) and unit cell dimensions a = 11.314(6), b = 12.846(3), c = 8.679(2) Å; α = 91.93(3)°, β = 90.31(3)° and γ = 99.13(3)°. It contains centrosymmetric [Sb₆O₄(NCS)₁₂]^2? anions packed with isolated tetramethyl-ammonium cations. The fundamental structural element of the anion is provided by the fusion of three SbOSbO rings forming a zig-zag portion of a ribbon, only slightly pleated. Peculiar is the unequivalence of the six thiocyanate ligands, though all primarily N-bonded to antimony atoms. Three thiocyanates are terminal while other three are asymmetrically N-bridging between two centers; two of this latter type are also interconnecting the anions via Sb???S contacts. There are three different antimony environments, the primary bonding at Sb being to one nitrogen and three oxygens, to one oxygen and three nitrogens and to two atoms of each type.     

The Borosulfates K4[BS4O15(OH)], Ba[B2S3O13], and Gd2[B2S6O24]

K₄[BS₄O₁₅(OH)], Ba[B₂S₃O₁₃], and Gd₂[B₂S₆O₂₄] were obtained by a new synthetic approach. The strategy involves initially synthesizing the complex acid H[B(HSO₄)₄] which is subsequently reacted in an open system with anhydrous chlorides of K, Ba, and Gd to the respective borosulfates and a volatile molecule (HCl). Furthermore, protonated borosulfates should be accessible by appropriate stoichiometry of the starting materials, particularly in closed systems, which inhibit deprotonation of H[B(HSO₄)₄] via condensation and dehydration. This approach led to the successful synthesis of the first divalent and trivalent metal borosulfates (Ba[B₂S₃O₁₃] with band‐silicate topology and Gd₂[B₂S₆O₂₄] with cyclosilicate topology) and the first hydrogen borosulfate K₄[BS₄O₁₅(OH)].     

Rare-earth iodides in ionic liquids: the crystal structure of [SEt3]3[LnI6] (Ln = Nd, Sm)

Crystals of [SEt3]3[LnI6] (Ln = Nd, Sm) were obtained by the reaction of LnI2 with the ionic liquid [SEt3][Tf2N] [Tf2N = bis(trifluoromethanesulfonyl)imide]. The compounds are characterized by octahedral [LnI6]3- units that are surrounded by a distorted cube of triethylsulfonium cations.     

The first organically templated 1D lithioberyllofluoride chain, [LiBe2F7][C4N2H12] [H2O]1.5

Using a combination of hydrothermal and slow evaporation experimental techniques a 1D lithium-beryllium-fluoride chain has been synthesised. In this material a 3D hydrogen bonded network exists between solvent water, a doubly protonated organic piperazinium template and the inorganic chain.