Extraction of the contribution of kinetic profile for reaction of a chemical species in unknown matrices by standard addition method

A new and simple strategy is applied to resolve kinetic profile for the reaction of an analyte in unknown matrices, using standard addition method (SAM). The proposed method uses kinetic spectrophotometric data obtained by standard addition of analyte into unknown mixtures followed by the reaction of analyte with a proper reagent. The proposed method extracts kinetic profile for the reaction of an analyte by averaging the kinetic profiles obtained by subtraction of kinetic profiles after and before standard addition. The rate constant can be obtained using computational curve fitting. The performance of method was evaluated by using synthetic data as well as several experimental data sets. The proposed method can be applied to obtain kinetic profiles of the reactions in the presence of additive interference as well as multiplicative interferences. Hydroxylation reaction of diphenylcarbazide (DPCI) in the presence of diphenylcarbazone (DPCO) as a real system at various pHs was also studied by the present method. The rate constant and the order of the hydroxylation reaction were determined from extracted kinetic profiles.     

示波指示技术在动力学分析中的应用——交流示波双电位催化动力学法测定Mo和Cu

本文利用Mo(Ⅵ)对H₂O₂氧化KI、Cu(Ⅱ)对K₂S₂O₈氧化KI的作用分别测定了Mo(Ⅵ)和Cu(Ⅱ)。结果表明,此法具有直观、简便、仪器简单和快速等特点,测定灵敏度也有所提高,Mo(Ⅵ)可达10^-8(mol/L)数量级,Cu(Ⅱ)可达5×10^-7mol/L数量级。'     

测定可逆反应动力学参数的一种新方法

提出了测定一级可逆反应速率常数的新方法,用以测定稀土的偶氮胂Ⅲ络合物与CyDTA交换反应的速率常数,并详细讨论了测定速率常数时动力学数据的选取原则。     

催化动力学分光光度法测定痕量铜的研究与应用

评述近年来催化动力学分光光度法测定痕量铜的研究进展,包括催化褪色动力学分光光度法、催化显色动力学分光光度法和阻抑动力学分光光度法,主要探讨各反应体系及其条件、方法的检出限、测定范围、应用等.研究新的高灵敏度指示反应、寻找新的活化剂、提高监测技术的灵敏度、对反应的机理进行研究、将催化动力学分析与其它分析技术相结合将是催化...     

过渡金属Schiff碱配合物的研究(Ⅱ)——N-水杨醛甘氨酸三吡啶合镍(Ⅱ)热分解非等温动力学的研究

对由水杨醛及其衍生物所形成的Schiff碱配合物的研究已有不少报道,其中一些配合物具有抑菌、抗癌和抗病毒活性,可作为生物氧载体的模型化合物.     

Automation of the Batch Method for Reaction Kinetic Studies Using Flow Injection Analysis. Kinetic Study of Hydrolysis Of N4-Acetylsulfanilamide,Acetylsalicylic Acid and Phenyl Phosphate

Abstract

The automation of the discontinuous (batch) method for kinetic stucfies using flow-injection analysis (FIA) is described. Aliquots of the reaction mixture are automatically injected in an appropriate manifold and the kinetic profile of the reaction is obtained as a series of absorbance peaks. Observed reaction rate constants are calculated using the Guggenheim and non-linear fitting approaches. The new method is evaluated in the kinetic study of the acid hydrolysis of N⁴-acetylsulfanilamide by colorimetric monitoring of sulfanilamide, the alkaline hydrolysis of acetylsalicylic acid (aspirin) by colorimetric monitoring of salicylate, and the enzymic hydrolysis of phenyl phosphate with alkaline phosphatase by colorimetric monitoring of phosphate. The automated flow-injection batch method can be used in kinetic studies of reactions with t_1/2 greater than 200 s.     

Extracting the mechanisms and kinetic models of complex reactions from atomistic simulation data

Determining reaction mechanisms and kinetic models, which can be used for chemical reaction engineering and design, from atomistic simulation is highly challenging. In this study, we develop a novel methodology to solve this problem. Our approach has three components: (1) a procedure for precisely identifying chemical species and elementary reactions and statistically calculating the reaction rate constants; (2) a reduction method to simplify the complex reaction network into a skeletal network which can be used directly for kinetic modeling; and (3) a deterministic method for validating the derived full and skeletal kinetic models. The methodology is demonstrated by analyzing simulation data of hydrogen combustion. The full reaction network comprises 69 species and 256 reactions, which is reduced into a skeletal network of 9 species and 30 reactions. The kinetic models of both the full and skeletal networks represent the simulation data well. In addition, the essential elementary reactions and their rate constants agree favorably with those obtained experimentally. © 2019 Wiley Periodicals, Inc.     

Obtaining enriched compounds via a tandem enantioselective reaction and kinetic resolution polishing sequence

Herein we describe a tandem method of coupling an enantioselective reaction with a nonenzymatic kinetic resolution to prepare highly enantioenriched compounds. The procedure employs a moderately selective enantioselective reaction on a ketone or aldehyde to form an enriched alcohol followed by a kinetic resolution of the alcohol to generate ee's of >99% in yields greater than what is possible with a kinetic resolution. This method highlights an avenue to quickly acquire highly enriched compounds without developing and optimizing a new methodology.     

Study of ε-caprolactone polymerization by NIR spectroscopy

Near-infrared (NIR) spectroscopy is proposed for the in-line quantitative and kinetic study of the polymerization of ε-caprolactone and eventually to facilitate real-time control of the manufacturing process. Spectra were acquired with a fibre-optic probe operating in transflectance mode immersed in the reactor. The NIR data acquired were processed using a multivariate curve resolution alternating least squares (MCR-ALS) algorithm. The proposed method allows calculation of the concentration and spectral profiles of the species involved in the reaction. The key point of this method is the lack of reference concentrations needed to perform the MCR-ALS method. The use of an extended spectral matrix using both process and pure analyte spectra solves the rank deficiency. The concentration profiles obtained were used to calculate a kinetic fitting of the reaction, but the method was improved by applying kinetic constraints (hard modelling). The rate constants of batches at different temperatures and the energy of activation for this reaction were calculated. Whenever possible, the hard modelling combined with the MCR-ALS method improves the fit of the experimental data: the results show good correlation between the NIR and reference data and allow the collection of high-quality kinetic information on the reaction (rate constants and energy of activation).     

N-溴代丁二酰亚胺氧化异丙醇反应的热动力学研究

利用Batch型热导式热量计测定了N-溴代丁二酰亚胺(NBS)氧化异丙醇反应的热谱曲线,并分别利用简单级数反应和连续一级反应热动力学特征对比参量法的数学模型计算了反应的动力学参数,计算结果表明:利用连续一级反应热动力学研究法处理得到的动力学参数与文献通过碘量法的测定值是吻合的,因此,在质子性溶剂中的NBS氧化异丙醇反应遵从连续一级反应的动力学规律。     

Determination of streptomycin in a pharmaceutical sample based on its degradation by hydrogen peroxide in the presence of copper(II).

The kinetics of streptomycin degradation by hydrogen peroxide at pH 7.4 was investigated. The reaction was catalyzed by traces of Cu(II) ions, and it was followed spectrophotometrically at 322 nm by applying the initial-rate method. The kinetic parameters of the reaction are reported, and a rate equation is suggested. From the dependence of the relative rate constants on the temperature, the activation energy was calculated to be 57.5 kJ/mol. Based on this reaction, a kinetic method for streptomycin determination is proposed. The calibration graph is linear in the ranges 1.94 - 15.48 microg/cm(3) and 0.15 - 1.94 microg/cm(3). The influence of foreign ions and molecules on the accuracy of the determinations was investigated. The proposed kinetic method has high selectivity and good sensitivity, and enabled to determine streptomycin in pharmaceutical samples.     

铜(Ⅱ)催化邻甲氧基酚的氧化自聚反应研究与应用

研究了在硼酸 -氢氧化钠缓冲介质中 ,痕量 Cu( )催化邻甲氧基酚的氧化自聚反应的最佳条件、动力学参数及反应机理 ,建立了催化动力学光度法测定痕量铜的新方法。方法的线性范围为 0～ 1 80 ng/2 5m L,检出限为 4.9× 1 0 -11g/m L。已应用于铅锌矿废渣中铜的测定     

Time-dependence of the polarized intensity ratio in CIDNP investigations

The time-dependence of the polarized intensity ratio within a product molecule has been studied by a kinetic method. The kinetic analysis of polarized product formation shows that considerable changes in CIDNP ratios occur during the reaction but characteristic curves can be obtained under different experimental conditions. A method is proposed to evaluate the relative enhancement coefficients on the basis of these characteristic curves, and to obtain information on the kinetics of the reaction.     

Kinetics of dehydroxylation and evaluation of the crystallinity of kaolinite

This study presents results on the kinetics of kaolinite dehydroxylation. The accuracy of various methods of determining the values for the kinetic parameters and their sensitivity in detecting the mechanism of reaction is investigated. In particular, the differential order of reaction method of Baker, the general method of Achar et al., the integral method of Boy and Bohme, and the method of Coats and Redfern as modified by Fong and Chen are considered.

Kaolinites from well-known sources are used to study the influence of crystallinity on the values of kinetic parameters. The statistical significance of the various mathematical methods for the assessment of the data obtained from non-isothermal thermogravimetry is determined by comparison with experimental and theoretical data using a computer programme developed for this purpose. The study demonstrates that the kinetic parameters can be used to quantify the degree of crystallinity of kaolinite and also confirms other findings that the dehydroxylation of kaolinite is a second-order reaction.     

Kinetic determination of traces of iodide by its catalytic effect on oxidation of sodium pyrogallol-5-sulfonate by hydrogen peroxide.

The kinetic method is based on a catalytic effect on the oxidation of sodium pyrogallol-5-sulfonate by hydrogenperoxide. The reaction is followed spectrophotometrically at 436.8 nm. The kinetic parameters of the reaction are reported and a rate equation is suggested. The calibration graph is linear in the range 10-200 ng cm(-3). The effects of certain foreign ions upon the reaction rate were determined for the assessment of the selectivity of the method. This method has high sensitivity and good selectivity when anions are concerned as well. That is why it can be successfully applied to determination of iodide in real samples (mineral water and soil) directly after the elimination of cations, which interfere. The method was applied to determine iodide in natural waters and soil.     

用化学动力学方法估算颗粒表面的分维

A chemical kinetic method based on the kinetic expression of the second-order reaction on fractals is used to determine the spectral dimension of fractal surfaces. The method can conveniently give the spectral dimension by analyzing the relation between reactant concentration and reaction time (ct～t). The spectral dimension of the Diffusion-Limited Aggregate (DLA) is obtained by Monte Carlo simulation of the desorption process of chemisorbed hydrogen from DLA, and it is in agreement, with that in literature. Also, the spectral dimension of a real catalyst 12% Ni/Al2O3 is obtained by the method.     

Pd/C催化松脂分子间氢转移反应的集总动力学

以Pd/C为催化剂,在改进的动力学实验装置上研究了松脂分子间氢转移反应的集总动力学.在消除内、外扩散影响的条件下,在线跟踪反应产物并用气相色谱法测定反应体系组成随时间的变化,构造了Pd/C催化剂上松脂分子间氢转移集总反应网络,建立了包含单萜烯、枞酸型树脂酸、海松酸型树脂酸、对伞花烃、氢化单萜烯、脱氢枞酸、氢化枞酸型树脂酸和氢化海松酸型树脂酸等复杂反应体系的集总动力学模型,并估算了模型参数.松脂单萜烯和树脂酸的反应级数分别为1和2,并得到了松脂分子间氢转移中各反应过程的活化能.结果表明,所建动力学模型与实验数据吻合良好,并能预测反应在533 K下的集总组分浓度分布.Pd/C催化松脂分子间氢转移反应以脱氢反应为主,树脂酸的氢转移速率大于单萜烯的氢转移速率.     

立方体纳米氧化亚铜反应动力学的理论及实验研究

为了探究纳米多相反应过程的动力学行为,本文通过液相还原法可控合成了粒度为55 nm的立方体氧化亚铜（Cu₂O）。基于纳米与块体Cu₂O的区别,采用原位微量热技术获取Cu₂O体系与HNO₃反应过程的热动力学精细信息,结合热动力学原理及动力学过渡态理论计算得到Cu₂O反应动力学参数,并建立立方体动力学模型讨论并佐证动力学实验结果。结果表明,纳米Cu₂O的反应速率常数大于块体,而表观活化能、指前因子、活化焓、活化熵和活化Gibbs自由能均小于块体;随着温度的升高,纳米Cu₂O的反应速率常数和活化Gibbs自由能均增大。动力学模型表明影响反应动力学参数的主要因素为：偏摩尔表面焓影响表观活化能,偏摩尔表面熵影响指前因子,偏摩尔表面Gibbs自由能影响反应速率常数。本文为纳米材料多相反应动力学参数的获取和分析应用提供了一种普适的理论模型和实验方法。     

About compensation effect by thermal decomposition of some catalyst precursors

Summary In order to obtain catalysts, the thermal decomposition of the precursors is a compulsory step. However, kinetic analysis of the decomposition data obtained under non-isothermal conditions lead very seldom to the intimate reaction mechanism. There is also a lack of information because in non-isothermal kinetics, the compensation effect, is rather a rule and unfortunately a source of debate. In order to discriminate between these processes, and the influence of conversion, respectively temperature on the reaction rate, the NPK (non-parametric kinetic - Sempere and Nomen) method was used. This method is based on the singular value decomposition algorithm (SVD) applied on the matrix of reaction rate at corresponding conversion and temperature. This method allows a less speculative determination of the conversion functions and of the kinetic parameters.