Gaussian beam scattering from arbitrarily shaped objects with rough surfaces

Abstract

The scattered field of Gaussian beam scattering from arbitrarily shaped dielectric objects with rough surfaces is investigated for optical and infrared frequencies by using the plane wave spectrum method and the Kirchhoff approximation, and the formulae for the coherent and incoherent scattering cross sections are obtained theoretically based on geometrical optics and tangent plane approximations. The infrared laser scattering cross sections of a rough sphere are calculated at 1.06 μm, and the influence of the beam size is analysed numerically. It is shown that when the beam size is much larger than the size of the object, the results in this paper will be close to those of an incident plane wave.     

Bistatic scattering by arbitrarily shaped objects with rough surface at optical and infrared frequencies

The scattering cross sections for arbitrarily shaped dielectric objects with rough surface are determined for optical and infrared frequencies using the Kirchhoff approximation. The formula of the coherent scattering cross section is derived, and numerical method of incoherent scattering cross section is given. As a specific example, the infrared laser scattering cross sections of rough spheres are calculated at 1.06 m.     

Scattering of Gaussian beam by arbitrarily shaped inhomogeneous particles

A hybrid finite element-boundary integral method is applied to characterize the scattering of an arbitrarily incident-focused Gaussian beam by arbitrarily shaped inhomogeneous particles. Specifically, the Davis–Barton fifth-order approximation in combination with rotation Euler angles is used to represent the arbitrarily incident Gaussian beams. The finite element method is employed to formulate the fields in the interior region of the inhomogeneous particle, while the boundary integral equation is applied to represent the fields in the exterior region. The interior and exterior fields are coupled by means of the field continuity conditions. To reduce the computational burden, the frontal method and the multilevel fast multipole algorithm are adopted to solve the resultant matrix equation. Numerical results for differential scattering cross sections of several selected inhomogeneous particles are presented and can be served as further study on this subject.     

A general method for analyzing em wave scattering from arbitrarily shaped two-dimensional periodic surfaces

In this paper the Method of Lines (MoL) is successfully extended to solve the EM wave scattering problems of periodic surfaces with arbitrary profile. As examples, the scattering coefficients of space harmonics of corrugated and sinusoidal surfaces are calculated. The results are in good agreement with available data from Wirgin and from A.K.Jordan et al. In addition, the results of comb structure are also calculated. The flexibility and less computation of this method make it eligible for analyzing various two-dimensional periodic structures.     

Electromagnetic scattering from two parallel 2D targets arbitrarily located in a Gaussian beam

In this paper based on the equivalence principle and the reciprocity theorem, the scattered field up to second-order by two parallel 2D targets arbitrarily located in a Gaussian beam is considered. The first-order solution can easily be obtained by calculating the scattered field from isolated targets when illuminated by a Gaussian beam. However, because of the difficulty in formulating the couple scattering field, it is almost impossible to find an analytical solution for the second-order scattered field if the shapes of 2D targets are not canonical geometries. In order to overcome this problem, in this paper, the second-order solution is derived by using the technique based on the reciprocity theorem and the equivalence principle. Meanwhile, the relation between the secondary scattered field from target #1 and target {\#}2 is obtained. Specifically, the bi- and mono-static scattering of Gaussian beam by two parallel adjacent inhomogeneous plasma-coated conducting circular cylinders is calculated and the dependence of attenuation of the scattering width on the thickness of the coated layer, electron number density, collision frequency and radar frequency is discussed in detail.     

Three-dimensional imaging with detector arrays on arbitrarily shaped surfaces

Conventional multiview imaging systems commonly utilize a planar lenslet array and a rigid, flat image sensor in the pickup stage to capture different views of the scene. In this Letter, we remove this constraint by proposing the concept of three-dimensional (3D) imaging with detector arrays that may conform to arbitrarily shaped surfaces or platforms. A nonplanar detector array configuration can be used in combination with a flexible lenslet array to capture different views. The orientation and optical axes of individual image sensing elements could vary. A point-by-point 3D reconstruction algorithm is described and the feasibility of the proposed approach is demonstrated through simulated imagery.     

Light scattering from rough surfaces with superimposed periodic structures

0 ), where K is the wave vector of the periodic structure and λ₀ is the correlation length for random roughness. The surface height h of the periodic structure plays a less important role in the suppression of the diffuse scattering, but it gives an oscillating term in grating scattering intensity that can produce the “rainbowing” (or coloration) effect for such a surface. In practice, this may result in increased visual brightness of textured metallic surfaces and also in a new and interesting method of surface coloration control. The rapid development of focused beam texturing technologies leaves no doubt that patterns with a given spatial frequency and amplitude can be easily produced in experiments. Received: 16 January 1997/Revised version: 19 June 1997     

White light scattering from non-Gaussian rough surfaces

Optics and Spectroscopy - A method is proposed for calculating the spectral correlation function of light intensity scattered from non-Gaussian rough surfaces. The correlation function of a...     

弹性波在固体自由粗糙平界面上的散射

利用散射幅度矩阵的概念来处理弹性波在粗糙界面弹性介质中的散射问题。利用微扰近似解边界方程,对散射幅度进行求解,得到了散射幅度的0阶、1阶和2阶解。同时分析了粗糙起伏高度符合高斯分布时,散射幅度的数学期望值和方差,它们分别代表平均场和声场在偏离镜面方向的起伏。最后进行了实验。     

Combined Helmholtz equation-least squares method for reconstructing acoustic radiation from arbitrarily shaped objects

A combined Helmholtz equation-least squares (CHELS) method is developed for reconstructing acoustic radiation from an arbitrary object. This method combines the advantages of both the HELS method and the Helmholtz integral theory based near-field acoustic holography (NAH). As such it allows for reconstruction of the acoustic field radiated from an arbitrary object with relatively few measurements, thus significantly enhancing the reconstruction efficiency. The first step in the CHELS method is to establish the HELS formulations based on a finite number of acoustic pressure measurements taken on or beyond a hypothetical spherical surface that encloses the object under consideration. Next enough field acoustic pressures are generated using the HELS formulations and taken as the input to the Helmholtz integral formulations implemented through the boundary element method (BEM). The acoustic pressure and normal component of the velocity at the discretized nodes on the surface are then determined by solving two matrix equations using singular value decomposition (SVD) and regularization techniques. Also presented are in-depth analyses of the advantages and limitations of the CHELS method. Examples of reconstructing acoustic radiation from separable and nonseparable surfaces are demonstrated.     

一种求解任意入射波束的波束因子的方法

提出了一种将任意入射波束因子用矢量波函数展开的方法，根据波束在球坐标系中的展开形式，以及球谐矢量函数与非球坐标系的波矢量函数之间的关系，推导出任意入射波束在相应坐标系中的波束因子的理论表述形式.以椭球坐标系为例，介绍了将离轴的入射波束，用椭球矢量波函数展开的波束因子求解方法，此方法还可应用于柱坐标、椭柱坐标系中波束因子的求解，为研究粒子对任意入射波束的散射打下了基础. 关键词： 波束因子 广义米理论 光散射     

Rigorous solutions for electromagnetic scattering from rough surfaces

Abstract

First, the rough surface scattering problem is formulated from a statistical point of view. Then, different numerical schemes that permit one to solve Maxwell equations without approximation are presented for the three-dimensional scattering problem. Particular attention is paid to boundary integral methods and to the numerical techniques developed to handle large linear systems when short-range interactions dominate. Lastly, several important connected issues that require further numerical and theoretical improvements are discussed.     

Multiple light scattering from metal and dielectric rough surfaces

Abstract

A numerical study is done on light scattering from one-dimensional random rough surfaces supporting both dielectrics and metals. The influence of the corrugation on the Brewster angle as well as on the angular distribution of transmitted intensity into the dielectric is investigated. The authors also obtain enhanced backscattering in the light reflected from metallic surfaces. Finally they discuss the influence of roughness on the drop of reflectance due to polariton absorption.     

Exact multiple scattering of waves from random rough surfaces

The exact multiple scattering theory of waves scattered from a random rough surface is presented. We give an iterative series for the mean scattered intensity (I (Q)) for all order in the statistics. We show that the coherent intensity for large correlation distances approaches the value obtained in the Kirchhoff approximation by Beckmann. Also we prove that a “white noise” surface reflects specularly the whole incident intensity.     

A Markovian approach to atomic scattering from rough surfaces

Atomic scattering intensities from surfaces in a rough state are calculated, in the hard wall model, separating a form (or geometrical) factor from a statistical factor and neglecting all the edge effects. Attention has been paid more to the statistics than to the scattering problem. In principle only incoherent scattering occurs from a rough surface. This incoherent line shape is calculated for square and hexagonal lattices under the basic assumption that the surface level is a Markov process in two dimensions.     

粗糙海面对高斯分布激光光束的反射模型推导

研究激光光束海面反射光强的方向分布特性对海上光电对抗等领域的工程实践具有重要意义.本文采用分形方法模拟粗糙海面,并在海面基准坐标系中建立起描述粗糙海面几何特征的数学方程,然后基于蒙特卡罗方法模拟高斯光束,依据几何光学原理在基准坐标系下推导了高斯光束的海面反射模型,采用该模型可以编程计算激光光束海面反射光强的方向分布.将模拟计算结果与实验结果进行了对比分析,结果表明该模型可以较好地反映激光光束海面反射光强的分布趋势,验证了模型的有效性.     

Non-local small-slope approximation for wave scattering from rough surfaces

A new general analytical approach to solving the problems of wave scattering from rough surfaces, referred to as the non-local small-slope approximation (NLSSA), is suggested. It is formulated in the general form both for vector and scalar waves. This approach is valid for an arbitrary wavelength of radiation provided that the slopes of the undulations are small enough. The NLSSA represents a generalization of the small-slope approximation to situations where double scattering (in the optical sense) appears. It is demonstrated that with appropriate approximations the NLSSA of the lowest order reduces to the small-slope approximation of the second order.     

Multiple light scattering from metal and dielectric rough surfaces

A numerical study is done on light scattering from one-dimensional random rough surfaces supporting both dielectrics and metals. The influence of the corrugation on the Brewster angle as well as on the angular distribution of transmitted intensity into the dielectric is investigated. The authors also obtain enhanced backscattering in the light reflected from metallic surfaces. Finally they discuss the influence of roughness on the drop of reflectance due to polariton absorption.