Individual electrophoretic mobilities of liposomes and acidic organelles displaying pH gradients across their membranes

This report focuses on measuring the individual electrophoretic mobilities of liposomes with different pH gradients across their membrane using capillary electrophoresis with laser-induced fluorescence detection (CE-LIF). The results from the individual analysis of liposomes show that, using surface electrostatic theories and the electrokinetic theory as the first approximation, zeta potential contributes more significantly to the electrophoretic mobility of liposomes than liposomal size. For liposomes with an outer pH 7.4 (pH(o) 7.4) and a net negative outer surface charge, the most negative electrophoretic mobilities occur when the inner pH (pH(i)) is 6.8; at higher or lower pH(i), the electrophoretic mobilities are less negative. The theories mentioned above cannot explain these pH-induced electrophoretic mobility shifts. The capacity theory, predicting an induced electrical charge on the surface of liposomes, can only explain the results at pH(i) > 6.8. In this report, we hypothesize that there is a flip-flop process of phospholipids, which refers to the exchange of phospholipids between the outer and inner layers of the membrane. This flip-flop is caused by the pH gradient and membrane instability and results in the observed electrophoretic mobility changes when pH(i) is <6.8. Furthermore, it is found that the mobilities of acidic organelles are consistent with the predictions of liposome models we used here.     

Electrokinetic characterization of superparamagnetic nanoparticle–aptamer conjugates: design of new highly specific probes for miniaturized molecular diagnostics

With the view of designing new nanoparticle (NP)–aptamer conjugates and proving their suitability as biorecognition tools for miniaturized molecular diagnostics, new maghemite–silica core–shell NP–aptamer conjugates were characterized for the first time in terms of grafting rate and colloidal stability under electrophoretic conditions using capillary electrophoresis. After the grafting rate (on the order of six to 50) of the lysozyme-binding aptamer had been estimated, the electrophoretic stability and peak dispersion of the resulting oligonucleotide–NP conjugates were estimated so as to determine the optimal separation conditions in terms of buffer pH, ionic strength and nature, as well as temperature and electric field strength. The effective surface charge density of the NPs was close to zero for pH lower than 5, which led to some aggregation. The NPs were stable in the pH range from 5 to 9, and an increase in electrophoretic mobility was evidenced with increasing pH. Colloidal stability was preserved at physiological pH for both non-grafted NPs and grafted NPs in the 10–100 mM ionic strength range and in the 15–60 °C temperature range. A strong influence of the nature of the buffer counterion on NP electrophoretic mobility and peak dispersion was evidenced, thus indicating some interactions between buffer components and NP–aptamer conjugates. Whereas an electric field effect (50–900 V cm^?1) on NP electrophoretic mobility was evidenced, probably linked to counterion dissociation, temperature seems to have an appreciable effect on the zeta potential and aptamer configuration as well. This information is crucial for estimating the potentialities of such biorecognition tools in electrophoretic systems.     

Determination of the microenvironment-pH and charge and size characteristics of amino acids through their electrophoretic mobilities determined by CZE

Effective electrophoretic mobility data of 20 amino acids reported in the literature are analyzed and interpreted through simple physicochemical models, which are able to provide estimates of coupled quantities like hydrodynamic shape factor, equivalent hydrodynamic radius (size), net charge, actual pK values of ionizing groups, partial charges of ionizing groups, hydration number, and pH near molecule (microenvironment-pH of the BGE). It is concluded that the modeling of the electrophoretic mobility of these analytes requires a careful consideration of hydrodynamic shape coupled to hydration. In the low range of pH studied here, distinctive hydrodynamic behaviors of amino acids are found. For instance, amino acids with basic polar and ionizing side chain remain with prolate shape for pH values varying from 1.99 to 3.2. It is evident that as the pH increases from low values, amino acids get higher hydrations as a consequence each analyte total charge also increases. This result is consistent with the monotonic increase of the hydrodynamic radius, which accounts for both the analyte and the quite immobilized water molecules defining the electrophoretic kinematical unit. It is also found that the actual or effective pK value of the alpha-carboxylic ionizing group of amino acids increases when the pH is changed from 1.99 to 3.2. Several limitations concerning the simple modeling of the electrophoretic mobility of amino acids are presented for further research.     

Investigation of the separability of thaumatin by capillary electrophoresis

The electrophoretic behaviour of the highly basic protein thaumatin was explored in strongly acid (pH 2) and mildly acid (pH 4.5) separation systems using both bare and coated fused silica capillaries. The separation selectivity for thaumatin I, thaumatin II, and for other sample constituents was insufficient for their baseline separation at pH 2 in an uncoated capillary because the separation efficiency was markedly lower than is common in the electrophoretic separations of proteins. A separation selectivity higher by up to one order of magnitude has been reached at pH 4.5. A pronounced asymmetry of zones, which impaired resolution at this pH, was effectively suppressed by coating of the capillary wall with a polymer. In fact, adsorption on the capillary coating always plays a contributory role whenever a good separation of thaumatin constituents is attained. This indicates that electrochromatographic separation systems based on capillaries coated with the layer of either cationic or hydrophilic uncharged polymer hold promise for the development of methods for thaumatin analysis.     

Separation of diadenosine polyphosphates by capillary electrophoresis

The influence of buffer composition and pH on the electrophoretic behavior of diadenosine polyphosphates with a phosphate chain ranging from two to five phosphate groups has been examined. The electrophoretic mobility in carbonate buffer increases according to the number of phosphates, whereas in borate buffer the mobility changes in an irregular way as a function of pH. This finding can be rationalized by a well-known interaction of borate with ribose rings, which modifies the charge and the hydrodynamic radius of each diadenosine polyphosphate in a different way. Our study shows that the best separation of diadenosine polyphosphates can be achieved at the highest pH values of the range examined both in borate and carbonate buffers.     

Variation of the pH of the background electrolyte due to electrode reactions in capillary electrophoresis: Theoretical approach and in situ measurement

Electrode reactions during the electrophoretic process may change the pH of the buffer and subsequently the migration behavior of solutes with resultant loss of reproducibility. A theoretical treatment of pH variations due to electrolytic processes is presented. The choice of buffer appears to have a dramatic influence on the pH variations observed, even if substantial buffer action is expected at the pH chosen. The experimental evaluation of the separation of 4-hydroxy-3-methoxycinnamic acid and 3-hydroxybenzoic acid reveals that the quality of the separation decreases continuously from a baseline separation observed in the first experiment to a comigration of the two solutes (resolution = 0) in the ninth experiment. A pH decrease of about 0.05 pH units accounts for the observed changes in mobility. A novel in situ pH measurement approach is presented, in which the mobility, peak area, and peak height of an indicator dye are related to the pH in the capillary. This enables the identification and quantification of pH variations during electrophoretic runs: the pH decreases at the anodic side already after the first experiment and pH variations as small as 0.02 pH units can be measured. The variations in peak height appear to be less suited. The calculated pH variations are in close agreement with the ones obtained experimentally.     

Influence of pH on the migration properties of oligonucleotides in capillary gel electrophoresis.

The effect of pH on the electrophoretic migration properties of single-stranded oligodeoxyribonucleotides in capillary gel electrophoresis was investigated. Different homooligodeoxyribonucleotides of equal chain length showed significant differences in relative migration when the pH of the gel buffer was varied from pH 6 to 8, parallel with the running buffer. A similar variation in migration order was observed during the electrophoretic equilibration of a pH 8 gel-filled capillary column with a pH 6 running buffer. In the latter instance, the current reached the new level after 20 min of electrophoretic equilibration with the pH 6 running buffer. However, it was observed that the migration order characteristic of the pH 6 gel was achieved only after 4 h of electrophoretic equilibration. To avoid this time-consuming equilibration process, these results suggest that gel-filled capillary columns should be prepared with the same buffer (composition and pH) that will be used as the running buffer during the separations.     

Migration behavior of therapeutic peptide hormones: prediction of optimal separation by capillary electrophoresis

A general equation that relates electrophoretic mobility of polyprotic peptide substances and pH of the running electrolytes is established, taking into account the species in solution and the activity coefficients. Modelling electrophoretic mobility as a function of pH can be simultaneously used for determination of ionization constants and selection of the optimum pH for separation of mixtures of the modelled compounds. The proposed relationships allow an important reduction of the experimental data needed for development of new separation methods. The accuracy of the proposed equations is verified by modelling the migration behavior of a heterogeneous series of polyprotic amphoteric peptide hormones. By calculating the values of predicted resolutions, selection of the optimum pH to perform separation of their mixtures becomes a rapid and simple process.     

Electrophoretic behavior of peptides in capillary electrophoresis influence of ionic strength and pH in aqueous-organic media.

Through correct pH, pKa and activity coefficients values, a model describing the effect of pH on electrophoretic mobility of substances has been applied to a series of peptides in water and in acetonitrile-water mixtures. The derived equations permit prediction of the optimum pH for the electrophoretic separation from only a few experimental values and they also permit determination of pKa values of analytes in the aqueous-organic media employed. Furthermore, the electrophoretic resolution between pairs of substances can be predicted, in order to evaluate electrophoretic separations of the studied peptides.     

Influence of buffer composition on the capillary electrophoretic separation of carbon nanoparticles

Carbon nanoparticles obtained from the flame of an oil lamp were examined by means of capillary electrophoresis. The influence of buffer composition on the separation of the mixture of negatively charged carbon nanoparticles was studied by varying buffer selection, pH, and concentration. The electrophoretic pattern was affected by both the co- and counter-ion in the buffer solution, influencing selectivity and peak shape. The capillary electrophoretic separations at different pH revealed species with large electrophoretic mobilities under a wide range of pH. The mobility of selected species in the mixture of nanoparticles showed a strong dependence upon the solution ionic strength. The mobility of these nanoparticles as a function of ionic strength was compared to classical electrokinetic theory, suggesting that under the experimental conditions utilized, the species are small, highly charged particles with appreciable zeta potentials, even at low pH.     

Electrophoretic behaviour of quinolones in capillary electrophoresis. Effect of pH and evaluation of ionization constants.

Quinolones are a family of antibacterial agents that are used extensively in both human and veterinary clinics. Their antibacterial activity is pH-dependent, and therefore an examination of protonation equilibria in quinolone solution is essential. In this work, dissociation constants of quinolones in water were obtained using capillary electrophoresis (CE). The method is based on measuring the electrophoretic mobility of the solute as a function of pH. Mobility and pH data are fitted using different models. These developed equations have two advantages. They permit the determination of pKa of analytes with the advantages of CE and also permit the prediction of the effect of pH on the electrophoretic behaviour of substances and then the prediction of the pH optimum for the separation methods, using the minimum of experimental measurements.     

Peptide fractionation by acid pH SDS-free electrophoresis

SDS-free polyacrylamide gel electrophoresis is an effective alternative approach to peptide fractionation. Here we describe a discontinuous buffer system at acid pH that improves the separation of acidic peptides from tryptic digestion. MOPS and chloride act as trailing and leading ions, respectively, in this system, while histidine operates as counterion and buffers all solutions. In these electrophoretic conditions, peptides with pI below 5.5 migrate with low overall electrophoretic mobilities but high differences from one another, which allows for their efficient resolution. In silico analysis of several proteomes shows that the acid pH system allows a peptide simplification of 2.5-fold with respect to the total peptide mixture, and still a proteome coverage of about 95% is achievable. A straightforward method with a protocol including proteomic studies was achieved for SDS-PAGE of proteins, enzyme treatment and further peptide fractionation by SDS-free acid PAGE.     

Parameters influencing separation and detection of anions by capillary electrophoresis

Electrolyte composition is critical in optimizing separation and detection of ions by capillary electrophoresis. The parameters which must be considered when designing an electrolyte system for capillary electrophoresis include electrophoretic mobility of electrolyte constituents and analytes, detection mode, and compatibility of electrolyte constituents with one another. An electrolyte system based on pyromellitic acid is well suited for use with indirect photometric detection, and provides excellent separations of anions. The ability to modify the electrophoretic mobility of pyromellitic acid as a function of ph provides flexibility in matching electrophoretic mobilities of analytes. Additionally, the use of alkyl amines as electroosmotic flow modifiers allows the rapid separation of anions by reversing the direction of electroosmotic flow in a fused-silica capillary. The optimization of a capillary electrophoresis electrolyte for anion analysis is also discussed in terms of pH, ionic strength and applied voltage. The effect of organic solvent on separation selectivity is also discussed.     

Computer simulation of the enantioselective separation of weak bases in an online capillary electrophoresis based microanalysis configuration comprising sulfated cyclodextrin as selector

Computer simulation was utilized to characterize the electrophoretic processes occurring after reactant mixing in an online assay format used for monitoring the enantioselective N‐demethylation of ketamine to norketamine in the presence of highly sulfated γ‐cyclodextrin (HS‐γ‐CD). The incubated reaction mixture (at pH 7.4 and without chiral selector) is bracketed by a low pH BGE containing 2% HS‐γ‐CD as chiral selector, thereby forming a discontinuous buffer system. Upon power application, simulation provides insight into the formation of moving boundaries and new zones together with the prediction of the behavior of ketamine and norketamine enantiomers. The analytes first migrate cationically in a zone electrophoretic manner until they come in contact with HS‐γ‐CD upon which enantioseparation is initiated. Complexation has a focusing effect and the electrophoretic transport becomes reversed, that is, toward the anode. Simulation revealed that the initial conditions for the chiral separation, including buffer components concentrations, pH, and ionic strength, are different than those in the BGE. As a consequence thereof, the experimentally determined complexation parameters for the BGE were unable to correctly describe the migration behavior of the analytes in this column section. An increase in the input binding constants by a factor of two to four, as a result of the decreased ionic strength, resulted in simulation data that agreed with experimental findings.     

Modeling the migration behavior of rabbit liver apothioneins in capillary electrophoresis

Metallothioneins (MTs) are a group of low-molecular-mass proteins (6-7 kDa) characterized by their great affinity for heavy metal ions. At acidic pH, the bound metal ions are released from the amino acidic structure and MTs lead to apothioneins. In this study, a general equation is used to model the electrophoretic mobility of rabbit liver apothioneins as a function of the pH of the separation electrolyte. The ability of these relationships to explain the migration behavior of these relatively complex polyprotic proteins in the pH range between 2 and 6 has been investigated. Their relevant ionization constant values in the studied pH range were estimated and employed for molecular charge calculations. The classical semiempirical relationships between electrophoretic mobility and charge-to-mass ratio (me vs. q/Malpha) were tested for prediction of their electrophoretic separations. The accuracy of the separations predicted at acidic pH was confirmed by CE-ESI-MS.     

Microbicides for HIV/AIDS. 1. Electrophoretic fingerprinting the H9 cell model system

An electrophoretic fingerprint of a CD4+ T-cell (H9) has been produced for the first time. Samples were taken from three separate cultures prepared at different times to obtain a general characterization of the cells. The availability of commercial instrumentation equipped with an auto-titrator has made possible the application of both the 2-dimensional and 3-dimensional representation of electrophoretic fingerprinting. The 2-dimensional treatment has been used to assess the reliability of the data and has detected hysteresis as a possible second-order effect. The 3-dimensional representation has been used to explore the data needed for a reliable overall pattern that characterizes the conditions of pH and conductivity required for an effective microbicide. The dome negative maximum in the electrophoretic fingerprint at high pH, along with the line of zero mobility (LZM) and a dome positive maximum at low pH, are interpreted as evidence for surface carboxyl groups prominent in the alkaline regime and surface amino groups prominent in the acid regime, suggesting that the H9 cell surface is zwitterionic. This has important implications as to the choice and design of microbicide actives.     

High-resolution computer simulation of electrophoretic mobilization in isoelectric focusing

Cationic and anionic electrophoretic mobilization for focusing of hemoglobins (Hb's) in the presence of 100 carrier ampholytes covering a pI range of 6.00-7.98 was studied by computer simulation at a constant current density of 300 A/m(2). Electropherograms that would be produced by whole column imaging and by single detectors placed at different locations along the focusing column are presented. Upon mobilization, peak heights of the Hb zones decrease, but the zones retain a relatively sharp constant profile and are migrating at a constant velocity. A further peak decrease occurs during readjustment at the locations of the original buffer/column interfaces, indicating that detection sensitivity is the lowest at these locations. An anionic carrier ampholyte mobility smaller than that of its cationic species produces a cathodic drift which is smaller than the transport rate used for electrophoretic mobilization. Compared to the case with equal mobilities of carrier ampholyte species, a small increase (decrease) is predicted for the cationic (anionic) mobilization rate within the focusing column. Simulation data suggest that electrophoretic mobilization after focusing and focusing with concurrent electrophoretic mobilization are comparable isotachophoretic processes that occur when there is an uninterrupted flux of an ion through the focusing column. Cathodic drift caused by unequal mobilities of the species of carrier ampholytes, electrophoretic mobilization, and decomposition occurring at the pH gradient edges are related electrophoretic processes.     

Adsorption of Sodium Dodecyl Sulfate to Colloidal Titanium Dioxide: An Electrophoretic Fingerprinting Investigation

The adsorption of sodium dodecyl sulfate to colloidal titanium dioxide was investigated using the electrophoretic fingerprinting approach. An electrophoretic fingerprint is a contour diagram of the observed electrophoretic mobility as a function of the bulk solution pH and plambda, the log of the bulk solution conductivity. Surfactant adsorption was observed to be strong under acidic conditions, as illustrated in the dramatic changes in the electrophoretic fingerprints. Electrokinetic data were compared with adsorption isotherm data obtained by a depletion method and good qualitative agreement was found. The observed pH changes associated with surfactant adsorption suggested ligand exchange as a possible mechanism of adsorption. Electrophoretic fingerprinting was shown to be a powerful means of examining surfactant adsorption to colloidal particles. Copyright 2000 Academic Press.     

Electrokinetic behaviour of polymer colloids with adsorbed Triton X-100

An experimental study on the electrophoretic mobility (µ_e) of polystyrene particles after adsorption of Triton X-100 (TX100) is described. Three polystyrene particles with different functionality (sulphate, carboxyl and amidine) were used as solid substrate for the adsorption of the surfactant. The electrophoretic mobility of the polystyrene-TX100 complexes at different electrolyte concentrations has been studied versus the amount of adsorbed surfactant. The presence of TX100 onto the colloidal particles seems to produce a slight shifting of the slipping plane. This is observed for electrolyte concentrations above ~10^-3 M. On the other hand, the electrophoretic mobilities of the latex-surfactant complexes with maximum surface coverage were measured versus pH and salt concentration. Specific ion interactions between H⁺/carboxyl groups and OH^-/amidine groups appeared at extreme pH which explain the anomalous electrophoretic behaviour encountered in the region where surface charge change.