Potentiometric stripping analysis for bismuth(III) in seawater

Total bismuth(III) in seawater can be determined either directly after acidification with 0.1 M hydrochloric acid or after co-precipitation with magnesium hydroxide by means of pre-electrolysis for 8 min at —0.90 V vs. SCE at a rotated glassy carbon/mercury film electrode prior to potentiometric stripping analysis. The limits of detection (2σ) are 0.6 and 0.003 nM, respectively. Three Kattegatt surface seawater samples were found to contain bismuth(III) concentrations of 5–12 pM (l–2.5 ng l^-1).     

Simultaneous determination of cadmium and lead in urine by means of computerized potentiometric stripping analysis

In computerized potentiometric stripping analysis for cadmium and lead in urine the samples are acidified with hydrochloric acid to a total concentration equal to 0.5 M. The sample is pre-electrolyzed at —1.25 V vs. SCE for 2 min without prior sample heating or deoxygenation, the working electrode being a mercury pre-coated glassy-carbon electrode. The lead and cadmium concentrations are evaluated by means of standard addition. Detection limits are 1 nM for both elements. Results obtained by potentiometric stripping analysis and by solvent extraction/atomic absorption are compared for samples from unexposed persons and from one patient under penicillamine treatment. The relative merits of the potentiometric stripping, anodic stripping and atomic absorption techniques are discussed.     

Cyclopentanone thiosemicarbazone, a new complexing agent for copper determination in biological samples by adsorptive stripping voltammetry.

A selective and sensitive stripping voltammetric method for the determination of trace amounts of copper(II) with cyclopentanone thiosemicarbazone (CPTSC) is presented. The method is based on the adsorptive accumulation of the resulting copper-CPTSC complex on a hanging mercury drop electrode, followed by the stripping voltammetric measurements at the reduction current of the adsorbed complex at -0.37 V vs. Ag/AgCl. The optimal conditions for the stripping analysis of copper include pH 9.3, deposition time of 120 s, and a deposition potential of -0.1 V (vs. Ag/AgCl). The peak current is linearly proportional to the copper concentration over a range 3.14 x 10(-9) M to 1.57 x 10(-6) M with a limit of detection of 1.57 x 10(-9) M. The technique has been applied to the determination of copper in biological samples, like urine and whole blood.     

Flow potentiometric stripping analysis for mercury(II)

The optimum experimental conditions, with respect to sample and stripping solution composition, in computerised flow potentiometric stripping analysis for mercury(II) with a gold working electrode are described. When pre-electrolysis -was done in a sample to which ammonia and iodide had been added and stripping was done in an acidified bromide solution containing chromium(VI), a detection limit of 2 nM (0.4 μg kg^-1) was obtained after 90 s of pre-electrolysis, the dynamic range being almost three decades. Copper(II) interfered when present in a 1000-fold excess and silver(I) when present in a 5-fold excess over mercury(II).     

Cathodic stripping voltammetry of 2-mercaptoethanol

The behaviour of 2-mercaptoethanol at a hanging mercury drop electrode by cathodic stripping voltammetry (c.s.v.) is studied. The stripping curves are recorded by three scanning modes: rapid-scan direct-current, differential-pulse and fundamental harmonic alternating-current polarography. Under the recommended conditions, pre-electrolysis is done at a potential of 0.0 V vs. Ag/AgCl for 3 min in a medium of pH 6.7 or 8 (Britton-Robinson buffer). Then after 1 min, stripping is done at a scan rate of 6.6 mV s^?1 preferably in the differential-pulse mode. The stripping peak at about ?0.4 V is used to determine 2-mercaptoethanol within the concentration range 3 × 10^?8/2-8 × 10^?7 mol l^?1. Calibration functions are reported; the standard additions method is preferred near the limit of detection. The interferences of several organic compounds are described.     

Determination of cadmium, lead and copper in milk and milk powder by means of flow potentiometric stripping analysis

A flow potentiometric stripping analysis procedure for the determination of cadmium, lead and copper in milk and milk powder samples is described. The instrumental arrangement consists of a glassy-carbon thin-layer cell through which six different solutions may be drawn by means of a peristaltic pump and magnetically operated valves. The glassy-carbon electrode is pre-coated with a film of mercury which can be employed for several analytical runs. The sample, diluted five-fold with Suprapur hydrochloric acid, is electrolysed for 0.5–4 min prior to stripping in Suprapur hydrochloric acid. Pump-rate, electrolysis time and potential, opening and closing of inlet valves and digital evaluation of stripping times are controlled automatically by the computer. The analytical results agree satisfactorily with the certified values for three milk powder reference samples. The detection limit for cadmium, lead and copper in milk samples after 4, 1 and 0.5 min of pre-electrolysis is 0.8, 4 and 8 μg/l., respectively. An analytical procedure for the determination of lead in samples containing high concentrations of tin is described.     

Multiple-scanning potentiometric stripping analysis

A computerized data acquisition technique— multichannel potentiometric monitoring—is used in conjunction with potentiometric stripping analysis. Multiple-scanning stripping potentiograms can be recorded so that the analytical signals are enhanced. A minicomputer with an internal store of4K 16-bit words suffices for experimental control and data treatment. The technique is suitable for stripping analysis with preconcentration times of 60–90 s at a mercury film electrode with linear response ranges of 1–100 μg l^-1 for cadmium(II) and lead(II). For preconcentration times of 30 min, the limit of detection is about 5 ng l^-1. Preliminary tests on continuous flow analysis are reported.     

Determination of Trace Amounts of Copper by Adsorptive Stripping Voltammetry

ABSTRACT

A technique is presented for the determination of trace amounts of copper(II) by adsorptive cathodic stripping voltammetry. The procedure is based on adsorptive accumulation of copper(II)-Alizarin Red S (ARS) complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the reduction current of the adsorbed complex at -0.16 V (vs. Ag/AgCl). The height of the copper -ARS reduction peak is linearly dependent upon the copper(II) concentration between 0.2-15 and 15-500 ng.ml^?1. The detection limit of the technique is 0.05 ng.ml^?1 copper(II) for a collection time of 1 minute. The method is free from most interferences. The procedure has been successfully applied to the determination of trace amounts of copper(II) in some analytical grade salts.     

Simultaneous determination of tin and lead by anodic stripping voltammetry with addition of surfactant

The influence of various surfactants on the simultaneous determination of tin(IV)and lead(II) by differential-pulse stripping voltammetry at a hanging mercury drop electrode in an acidic medium is reported. With addition of Pluronic-F68 or Brij-78, the tin wave disappears, while the lead wave is not affected. With a deposition time of 1 min at ?0.8 V vs. Ag/AgCl, 10^?7 M concentrations of each ion can be determined if the Sn/Pb ratio is ? 3.     

Sulfide determination in hydrothermal seawater samples using a vibrating gold micro-wire electrode in conjunction with stripping chronopotentiometry

A rapid electrochemical stripping chronopotentiometric procedure to determined sulfide in unaltered hydrothermal seawater samples is presented. Sulfide is deposited at −0.25 V (vs Ag/AgCl, KCl 3 M) at a vibrating gold microwire and then stripped through the application of a reductive constant current (typically −2 μA). The hydrodynamic conditions are modulated by vibration allowing a short deposition step, which is shown here to be necessary to minimize H₂S volatilization. The limit of detection (LOD) is 30 nM after a deposition step of 7 s. This LOD is in the same range as the most sensitive cathodic voltammetric technique using a mercury drop electrode and is well below those reported previously for other electrodes capable of being implemented in situ.     

Flow potentiometric and constant-current stripping analysis for arsenic(V) without prior chemical reduction to arsenic(III): Application to the Determination of Total Arsenic in Seawater and Urine

Arsenic(V) is reduced to elemental arsenic on a gold-coated platinum-fibre electrode at electrolysis potentials below ?1.60 V vs. Ag/AgCl and subsequently re-oxidized, either by means of a constant current, or chemically, with gold(III) as oxidant. Total arsenic in acidified seawater can be determined by means of electrolysis for 60 s at ?1.80 V vs. Ag/AgCl and subsequent stripping in 4 M hydrochloric acid containing 2.5 M calcium chloride. The detection limit obtained after 60 s of electrolysis (ca. 0.1 μg1^?1) is about ten times lower than that obtained by the electrochemical stripping methods for arsenic(III) reported hitherto. Total arsenic in urine is determined after digestion with nitric acid and hydrogen peroxide.     

Voltammetric Detection of Catechol and Dopamine Based on a Supramolecular Composite Prepared from Multifarene[3,3] and Reduced Graphene Oxide

A selective and sensitive modified‐electrode for catechol and dopamine was presented with supramolecular recognition accomplished by making use of the macrocyclic host multifarene[3,3] that was used as a composite with reduced graphene oxide. The morphologies and electrochemical nature of the composite were characterized by atomic force microscopy, transmission electron microscopy, cyclic voltammetry and differential pulse anodic voltammetry. The modified electrode, best operated at a potential around 0.16 V vs. Ag/AgCl, displayed a differential pulse voltammetric response in the linear concentration range of 10–100 nM within a detection limit of 0.51 nM (at S/N=3). It was further applied to detect dopamine (at a working potential of 0.18 V vs. Ag/AgCl) in the linear concentration range of 10–100 nM with a detection limit of 0.62 nM. The modified electrode also exhibited satisfactory results to the determination of dopamine injections. The constructed modified electrode for dopamine detection was investigated in the presence of the interfering substances including glucose, urea and ascorbic acid, indicating a good selectivity.     

Simultaneous determination of lead,copper, cadmium and zinc in pure zirconium metal by differential-pulse anodic stripping voltammetry

Zirconium metal (ca. I g) was dissolved in hydrofluoric acid, excess of which was removed by fuming with sulphuric acid. An aliquot of this solution was treated with sodium citrate and adjusted to pH 4.5. Lead, copper and cadmium were deposited on the hanging mercury drop electrode by applying a potential of ?0.8 V vs. Ag/AgCl for 1 min and anodic stripping voltammograms were recorded; the anodic peaks appeared at ?0.51, ?0.14 and ?0.67 V, respectively. In a separate run, zinc was deposited at ?1.2 V and the stripping peak appeared at ?1.1 V. Standard additions were used to quantify these impurities at levels in the low mg kg^?1 range, with relative standard deviations of 5–11%.     

Catalytic-adsorptive stripping voltammetry of cobalt in the presence of 2,2'-bipyridine and nitrite

A highly sensitive and selective procedure is presented for the voltammetric determination of cobalt. The procedure involves an adsorptive accumulation of cobalt-2,2'-bipyridine complex on a hanging mercury drop electrode, followed by a stripping voltammetric measurement of the catalytic reduction current of nitrite at - 1.25 V (vs. Ag/AgCl). The optimum conditions for the analysis of cobalt include 0.1 M ammonium buffer (pH 8.55-9.25), 2.0-5.0 muM 2,2'-bipyridine, 0.20 M sodium nitrite and an accumulation potential between -0.75 and - 0.90 V (vs. Ag/AgCl). An accumulation time of 30 s results in a very low detection limit of 9.5 pM (0.56 p.p.t.) and a linear current-concentration relationship up to 2.0 nM. The relative standard deviation at 0.10 nM is 4.9%. Possible interferences from co-existing ions are also investigated.     

Catalytic cathodic stripping voltammetry of oxidized glutathione at a hanging mercury drop electrode in the presence of nickel ion

Oxidized glutathione (GSSG) can be determined after previous accumulation on the HMDE at E > -0.2 V (vs. the Ag AgCl reference electrode). GSH is formed during the accumulation, possibly by a mercury-ion-assisted hydrolytic disproportionation of GSSG. In the subsequent cathodic scan GSH is released and catalyses the reduction of nickel ion, giving a peak located at -0.6 V. This enables the determination of GSSG by differential-pulse cathodic stripping voltammetry at pH 7.0 in the phosphate acetate or MOPS buffer containing 0.5-1.0 mM Ni(II). The detection limit is 10 nM. The calibration graph is linear even in the presence of small amounts of human serum albumin, HSA. However, HSA increases the detection limit (20 nM for 3 x 10(-4)% HSA). Acetyl-cysteine in small excess or Cu(II) present as reagent impurity do not interfere. Glutathione, cysteine and similar compounds, which accumulate as mercury salts and form stable nickel complexes, will interfere. The method is put forward as a novel alternative stripping voltammetric method to those involving accumulation and determination as mercury or copper salts and complexes, in the knowledge that it may have advantages in particular analytical situations. In particular the method discriminates against compounds which accumulate as mercury salts but which do not form stable nickel complexes.     

Determination of traces of bismuth in copper by anodic stripping voltammetry

Summary Procedures are described for the determination of bismuth impurities in. copper using anodic stripping voltammetry on a hanging mercury drop electrode. Bismuth was previously separated from copper by cation or anion exchange in hydrochloric acid. The method was applied to the analysis of commercially available high purity copper, showing satisfactory sensitivity and accuracy. The detection limit was about 2×10^–9 M bismuth in solution for a pre-electrolysis time of 15 min (–0.5 V vs. Ag/AgCl); this corresponds to 0.004 ppm of bismuth for a 1 g sample and a final volume of 10 ml after separation.

---

Bestimmung von Wismutspuren in Kupfer durch anodische Amalgamvoltammetrie

Zusammenfassung Mit hängendem Quecksilbertropfen. Wismut wird vor der Bestimmung durch Kationen oder Anionenaustausch aus salzsaurer Lösung vom Kupfer abgetrennt. Das Verfahren wurde zur Analyse von handelsüblichem hochreinem Kupfer angewendet. Mit einer Vorelektrolysedauer von 15 min (–0,5 V gegen Ag/AgCl) konnten noch 2×10^–9 M Bi bestimmt werden; das entspricht 0,004 ppm Bi für eine 1 g-Probe bei einem Endvolumen von 10 ml nach der Trennung.

     

Stripping voltammetric determination of traces of technetium with a glassy carbon electrode coated with tri-n-octylphosphine oxide

Technetium(VII) and Tc(IV) are concentrated from 3 M hydrochloric acid media by complexing with tri-n-octylphosphine oxide applied as a thin layer to a glassy carbon electrode. Differential-pulse cathodic stripping voltammetry from 0 V provides a stripping peak for Tc(VII) at ?350 mV (vs. Ag/AgCl). The detection limit after an enrichment time of 10 min is about 1.8×10^?8 M Tc(VII). Technetium(IV) produces a stripping peak near the Tc(VII) peak which can be used for rough estimates of the Tc(VII)/Tc(IV) ratio within limited ranges. Uranium(VI) in equimolar concentrations interferes.     

Anodic Stripping Potentiometric Determination of Cu,Pb, Cd and Zn In Natural Waters on a Novel Combined Electrode System

Abstract

A method is described for the reliable determination of copper, lead, cadmium and zinc in natural waters by anodic stripping potentiometry with the use of a novel combined electrode. The method involves two stripping cycles during which copper is initially determined on its own, followed by simultaneous determination of lead, cadmium and zinc after addition of gallium (III) ions. The optimum conditions include 0.01 M HCl as supporting electrolyte, 10 mg/L Hg (II) as chemical oxidant; E_dep(Cu) -700 mV vs Ag/AgCl; E_{dep(Pb,Cd,Zn)} -1200 mV vs Ag/AgCl; t_dep 10s; 150 μg/L Ga (III); sample rotation rate 5 and rest period 30s. Under these conditions, as low as 0.06 μg/L Cu (0.7% RSD); 0.2 μg/L Pb (13% RSD); 0.04 μg/L Cd (7.8% RSD) and 0.06 μg/L Zn (5.5% RSD) can be determined reliably. A linear concentration range of 0–110 μg/L was obtained for the four metals. The successful application of the method to reference fresh water, creek water and tap water is demonstrated.     

Determination of cadmium in sewage sludge by differential pulse anodic stripping voltammetry

A procedure was developed for the determination of cadmium in sewage sludge by differential pulse anodic stripping voltammetry. A sodium peroxide fusion carried out in zirconium crucibles was found to give satisfactory results, based on analysis of standard reference materials. Samples collected from the municipal sludge lagoon in Fort Wayne, Indiana were found to have cadmium abundances ranging from 120 to 250 ppm, with most samples falling in the 120 to 170 ppm range. Interference from zinc is easily eliminated by carrying out the deposition step at -0.95 V vs. Ag/AgCl. Lead-to-cadmium ratios as high as 50:1 (ppm basis) have no effect on the height of the cadmium peak.     

Determination of folic acid by adsorptive stripping voltammetry at the static mercury drop electrode

Folic acid can be determined at nanomolar concentrations by controlled adsorptive accumulation of folic acid on a static mercury drop electrode held at ?0.3 V vs. Ag/AgCl followed by reduction of the surface species. In 0.1 M sulfuric acid, a cathodic scan gives peaks at ?0.47 v and ?0.75 V vs. Ag/Agcl; the latter peak provides greater sensitivity. Differential-pulse stripping is shown to be superior to normal-pulse and d.c. stripping. After a 5-min preconcentration, the detection limit is about 1 × 10^?10 M folic acid. The adsorptive stripping response is evaluated with respect to concentration dependence, preconcentration time and potential, solution acidity and the presence of gelatin and bromide. The relative standard deviation at the 5 × 10^?8 M level is 1.2%. This method is applied to the determination of folic acid in pharmaceutical tablets.