Theoretical study of the two-photon absorption properties of octupolar complexes with Cu(I), Zn(II) and Al(III) as centers and bis-cinnamaldimine as ligands

The equilibrium geometries, electronic structures, one- and two-photon absorption (TPA) properties of a series of octupolar complexes with the Cu(I), Zn(II) and Al(III) as coordinate centers and the bis-cinnamaldimine as ligands have been studied using the B3LYP/6-31G(d) and ZINDO-SOS methods. Compared with the dipolar metal complexes, all the octupolar metal complexes (including tetrahedral and octahedral complexes) have relatively large TPA cross-sections, indicating that building octupolar metal complex is an effective route to design of promising TPA material. Lewis acidity of metal center and molecular symmetry are two important factors for enhancement of TPA cross-section of metal complex. Due to the stronger Lewis acidity of Zn(II) than Cu(I) as well as Al(III) than Zn(II), the tetrahedral Zn(II) complex exhibits a TPA cross-section larger than that of the tetrahedral Cu(I) complex, the maximum TPA position of the octahedral Al(III) complex is red-shifted relative to the octahedral Zn(II) complex, and at the same time, the octahedral Al(III) complex has a large TPA cross-section. Compared with the tetrahedral complexes, the TPA cross-sections of the octahedral complexes are enhanced due to the increased number of ligands.     

Extraction of tungsten with 8-hydroxyquinoline and some of its derivatives

The extraction of tungsten by chloroform solutions of 8-hydroxyquinoline(I), 2-methyl-8-hydroxyquinoline(II), 5,7-dibromo-8-hydroxyquinoline(III) and 8-mercaptoquinoline(IV), as a function of the concentration of tungsten and reagent and the acidity of the aqueous phase, has been studied. Evidence was obtained for the quantitative extraction of tungsten over a wide range of acidity. The degree of extraction of tungsten at 10(-5)M concentration with I,III and IV gives two maxima when plotted against acidity. The extraction maximum for the more acidic solutions lies in the region where the reagents exist in the protonated form and its position depends on the reagent used. It is suggested that different tungsten complexes are extracted, depending on the acidity of the aqueous phase.     

Correlation between hydration and deprotonation in hexaaqua metal complexes

The hydration energy of metallic cations determined with density functional calculations using a double-numerical plus p-polarization basis set, related to the acidity constants of hexaaqua metal complexes, was investigated in the present study. From the results calculated by Vosko-Wilk-Nusair (VWN), Becke-Perdew (BP) and Becke-Lee-Yang-Parr (BLYP) density functionals, a global linear correlation with the observed acidity constants in both main group [Mg(II), Ca(II) and Al(III)] and (post-)transition group [Mn(II), Zn(II), Cd(II), Sc(III), Cr(III), Fe(III), Ga(III) and In(III)] hexaaqua metal complexes has been established:

VWN density functional: pK_a = 16.5760 + 0.0173E_hydr kcal mol⁻¹

BP density functional: pK_a = 15.7329 + 0.0182E_hydr kcal mol⁻¹

BLYP density functional: pK_a = 15.9448 + 0.0185E_hydr kcal mol⁻¹     

Electrochemistry of phosphaferrocenes: II. Electrochemical behavior of 3,3′,4,4′-tetramethyl-1,1′- diphosphaferrocene bonded to M(CO)5 (M = Cr,Mo, W) fragments forming heterometallic complexes with multiple redox centers

The redox behaviour of a series of heterometallic phosphaferrocenes (hereafter refered to as I, II and III) has been studied in propylene carbonate containing 0.1 M (C₂H₅)₄N⁺ ClO₄^? both mercury and platinum electrodes.Complex I (DPF) undergoes a reversible one-electron reduction. Complexes II and III exhibit the same reversible reduction step and one (species II) or two (species III) additional irreversible reduction step(s) generating [M(CO)₅]^? anions (M = Cr, Mo, W).Oxidation of the complexes II and III indicates that fragment I is involved in the first, easiest, oxidation step, whereas further step(s) involve the M(CO)₅ moieties. The redox characteristics of the complexes I, II, III, clearly indicate the absence of cooperation between metallic centers in II and III and the very effective barrier provided by the central iron in moiety I towards mutual effects of both phospholyl rings.     

Effect of chromium(III) and of other ions on the absorptiometric determination of copper with 2, 2'-biquinolyl

In the determination of small amounts of copper in certain alloys by liquid-liquid extraction of the bis-chelate of copper(I) with 2, 2'-biquinolyl, recovery of copper has been reported to be low when chromium(III) is present. The adverse effect of chromium(III) could be overcome by adding iron(II). It is now shown that the inhibiting effect of chromium is attributable to the formation of a kinetically inert ternary complex of chromium(III), copper(II) and citrate ions containing an equal number of atoms of each of the two metals. Copper can be displaced from this complex by any of the transition cations Mn(II), Fe(II), Co(II), Ni(II) and Zn(II). Zinc is shown to form a ternary complex formally analogous to that of copper. The formation of the ternary complexes has been studied polarographically. The formation of binuclear complexes of various hydroxy-acids is reviewed and a probable structure for the ternary complex is proposed which explains its stability and kinetic inertness. Analogies are drawn between this complex and ternary complexes of UO(2)(VI)-Al(III)-citrate and Cu(II)-Al(III)-tartrate which also cause interference in established analytical procedures.     

Thermically and electrochemically induced isomerization of a (bis(ferrocene)-cyclam)copper(II) complex

The new bis(ferrocene)-cyclam macrocycle 1,8-bis(ferrocenylmethyl)-1,4,8,11-tetraazacyclotetradecane, denoted L, has been synthesized. Two Cu(II) complexes with L have been isolated and characterized from X-ray structure determination and electrochemical studies. These two LCu(II) complexes correspond to the type I (ferrocenyl subunits in the same side of the cyclam plane) and type III (ferrocenyl subunits above and below the cyclam plane) isomers. The type I LCu(II) complex was synthesized from L and a Cu(2+) salt, while the type III isomer was obtained by oxidation in air or by comproportionation of the Cu(I) complex. The interconversion between type I and type III LCu(II) complexes is negligible in acetonitrile and slow in dimethyl sulfoxide but fast via an electrochemical reduction-reoxidation cycle. According to UV-vis and electrochemical characterizations, the type III isomer is thermodynamically more stable and the type I isomer is kinetically favored. A type III LNi(II) complex was also isolated and characterized by X-ray diffraction analysis and from electrochemical studies.     

Novel metal complexes of 3-acetylcoumarin-2-hydrazinobenzothiazole Schiff base: Design,structural characterizations,DNA binding,DFT calculations,molecular docking and biological studies

Five new Cu (II), Zn (II), Pd (II), Ru (III) and Ag(I) complexes, derived from the 3-acetylcoumarin-2-hydrazinobenzothiazole Schiff base (Hachbt), have been synthesized and characterized. The structures were established with the aid of elemental analyses (C, H, N), FT-IR, ¹H-NMR, ESR, UV–visible and ESI-mass spectra. The complexes were also investigated by magnetic susceptibility, thermal gravimetric analysis (TG-DTA) and cyclic voltammetry measurements. The results suggest that the Schiff base ligand behaves in two different ways: neutral mono/bidentate or mono-negative bi/tridentate. The calf thymus DNA (CT DNA) binding affinities of Hachbt and its complexes have been examined by UV–visible spectroscopy. The antifungal activity of the compounds was also screened against two fungal species of wood-decay basidiomycetes using the agar dilution method. Different complexes caused a reduction in the fungal colony diameters at a media concentration of 100 μg/ml. The best antifungal activity was observed for the Pd (II) and Ag(I) complexes with a 60% and 79% reduction, respectively. The effect of the complexes on the ability of the same fungi to decolorize poly-R dye on agar plates was also tested. All of the complexes showed an enhanced effect on the decolorization ability and the Cu (II) and Ru (III) complexes exhibited the strongest effect at a media concentration of 5 μg/ml. Theoretical studies were performed for all the complexes using the DFT/B3LYP/6–31 + g(d) basis set for calculations on the ligand atoms and LAN2DZ for the Pd (II) complex. The optimized geometries were found to be in a good agreement with the proposed structures. The molecular docking calculations show that the binding affinity of the Pd (II) complex is −309.170-309.2 kcal/mol, which suggests complexation with the DNA minor groove.     

Synthesis of N-morpholine or N,N-diethyl, N′-monosubstituted benzoyl thiourea copper complexes: characterization and electrochemical investigations

A series of N-morpholine or N,N-diethyl, N′-substituted benzoyl thioureas (R = Cl, Br, OMe or NO₂ in ortho, meta or para position) have been synthesized by condensation of morpholine or diethylamine with substituted benzoyl isothiocyanates. All CuL₂ complexes have been characterized. Cyclic voltammetry has shown that the irreversible process copper(II)/copper(I) redox systems are influenced slightly by the substitution, whereas the quasi-reversible copper(III)/copper(II) redox systems are not.     

Synthesis and characterization of transition metal complexes of N′-[(1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazol-4-yl)methylene]thiophene-2-carbohydrazide

A hydrazone ligand (HL) containing the thiophene moiety has been prepared via condensation of thiophene-2-carbohydrazide with 1,5-dimethyl-3-oxo-2-phenyl-2,3-dihydro-1H-pyrazole-4-carbaldehyde. The complexes of copper(II), nickel(II), cobalt(II), manganese(II), zinc(II), palladium(II), iron(III), ruthenium(III), uranyl(VI), and titanium(IV) with the ligand were prepared in good yield from the reaction of the ligand with the corresponding metal salts. The ligand and complexes were characterized using infrared, mass spectra, nuclear magnetic resonance, electronic absorption spectra, electron spin resonance, and magnetic moment measurements as well as elemental and thermal analyses. The results showed that the complexes are enolic by nature, whilst the ratio between the metal ion and the ligand depends on the acidity of the metallic ions and their oxidation numbers.     

Porphines de cobalt a liaison cobalt—carbone: synthese, reaction avec l''oxygene moleculaire et etude electrochimique

Various alkyl(tetraphenylporphinato)cobalt(III) compounds (RCoTPP, I) have been prepared by alkylation of tetraphenylporphinatocobalt(I). Photolysis of these compounds in the presence of molecular oxygen yield new complexes for which structure ROOCoTPP (II) is assumed. Electrochemical studies of complexes I and II are reported.     

Aqueous rhodium(III) hydrides and mononuclear rhodium(II) complexes

In aqueous solutions, as in organic solvents, rhodium hydrides display the chemistry of one of the three limiting forms, i.e. {Rh(I)+ H+}, {Rh(II)+ H.}, and {Rh(III)+ H-}. A number of intermediates and oxidation states have been generated and explored in kinetic and mechanistic studies. Monomeric macrocyclic rhodium(II) complexes, such as L(H2O)Rh2+ (L = L1 = [14]aneN4, or L2 = meso-Me6[14]aneN4) can be generated from the hydride precursors by photochemical means or in reactions with hydrogen atom abstracting agents. These rhodium(II) complexes are oxidized rapidly with alkyl hydroperoxides to give alkylrhodium(III) complexes. Reactions of Rh(II) with organic and inorganic radicals and with molecular oxygen are fast and produce long-lived intermediates, such as alkyl, superoxo and hydroperoxo complexes, all of which display rich and complex chemistry of their own. In alkaline solutions of rhodium hydrides, the existence of Rh(I) complexes is implied by rapid hydrogen exchange between the hydride and solvent water. The acidity of the hydrides is too low, however, to allow the build-up of observable quantities of Rh(I). Deuterium kinetic isotope effects for hydride transfer to a macrocyclic Cr(v) complex are comparable to those for hydrogen atom transfer to various substrates.     

Complexation of lanthanides, actinides and transition metal cations with a 6-(1,2,4-triazin-3-yl)-2,2':6',2'-terpyridine ligand: implications for actinide(III)/lanthanide(III) partitioning

The quadridentate N-heterocyclic ligand 6-(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-2,2'?:?6',2'-terpyridine (CyMe(4)-hemi-BTBP) has been synthesized and its interactions with Am(III), U(VI), Ln(III) and some transition metal cations have been evaluated by X-ray crystallographic analysis, Am(III)/Eu(III) solvent extraction experiments, UV absorption spectrophotometry, NMR studies and ESI-MS. Structures of 1:1 complexes with Eu(III), Ce(III) and the linear uranyl (UO(2)(2+)) ion were obtained by X-ray crystallographic analysis, and they showed similar coordination behavior to related BTBP complexes. In methanol, the stability constants of the Ln(III) complexes are slightly lower than those of the analogous quadridentate bis-triazine BTBP ligands, while the stability constant for the Yb(III) complex is higher. (1)H NMR titrations and ESI-MS with lanthanide nitrates showed that the ligand forms only 1:1 complexes with Eu(III), Ce(III) and Yb(III), while both 1:1 and 1:2 complexes were formed with La(III) and Y(III) in acetonitrile. A mixture of isomeric chiral 2:2 helical complexes was formed with Cu(I), with a slight preference (1.4:1) for a single directional isomer. In contrast, a 1:1 complex was observed with the larger Ag(I) ion. The ligand was unable to extract Am(III) or Eu(III) from nitric acid solutions into 1-octanol, except in the presence of a synergist at low acidity. The results show that the presence of two outer 1,2,4-triazine rings is required for the efficient extraction and separation of An(III) from Ln(III) by quadridentate N-donor ligands.     

Photoredox vs. energy transfer in a Ru(II)-Fe(II) supramolecular complex built with an heteroditopic bipyridine-terpyridine ligand

A trinuclear [[Ru(II)(bpy)(2)(bpy-terpy)](2)Fe(II)](6+) complex (I) in which a Fe(II)-bis-terpyridine-like centre is covalently linked to two Ru(II)-tris-bipyridine-like moieties by a bridging bipyridine-terpyridine ligand has been synthesised and characterised. Its electrochemical, photophysical and photochemical properties have been investigated in CH(3)CN and compared with those of mononuclear model complexes. The cyclic voltammetry of (I) exhibits, in the positive region, two successive reversible oxidation processes, corresponding to the Fe(III)/Fe(II) and Ru(III)/Ru(II) redox couples. These systems are clearly separated (DeltaE(1/2) = 160 mV), demonstrating the lack of an electronic connection between the two subunits. The two oxidized forms of the complex, [[Ru(II)(bpy)(2)(bpy-terpy)](2)Fe(III)](7+) and [[Ru(III)(bpy)(2)(terpy-bpy)](2)Fe(III)](9+), obtained after two successive exhaustive electrolyses, are stable. (I) is poorly luminescent, indicating that the covalent linkage of the Ru(II)-tris-bipyridine to the Fe(II)-bis-terpyridine subunit leads to a strong quenching of the Ru(II)* excited state by energy transfer to the Fe(II) centre. Luminescence lifetime experiments show that the process occurs within 6 ns. The nature of the energy transfer process is discussed and an intramolecular energy exchange is proposed as a preferable deactivation pathway. Nevertheless this energy transfer can be efficiently quenched by an electron transfer process in the presence of a large excess of the 4-bromophenyl diazonium cation, playing the role of a sacrificial oxidant. Finally complete photoinduced oxidation of (I) has been performed by continuous photolysis experiments in the presence of a large excess of this sacrificial oxidant. The comparison with a mixture of the corresponding mononuclear model complexes has been made.     

Disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (chromotropic salt) as a reagent in inorganic analysis

Summary The compound disodium-1,8-dihydroxy-naphthalene-3,6-disulphonate (sodium salt of chromotropic acid) is employed as a colorimetric reagent for titanium. It is also known to produce coloured complexes with chromium(VI), vanadium and uranium. In the present paper the formation of colour with forty metallic ions has been studied qualitatively, in neutral as well as in alkaline and acidic media. It has been found that the reagent yields coloured complexes with mercury(I), tin(IV), platinum(IV), gold(III), tellurium(VI), molybdenum(VI), iron(III), aluminium(III), chromium(III), and uranyl(II) besides those recorded above.The colour reactions are particularly sensitive to uranyl(II), iron(III), mercury(I), tin(IV), gold(III) und molybdenum(VI).     

A new dinuclear heme-copper complex derived from functionalized protoporphyrin IX

A new biomimetic model for the heterodinuclear heme/copper center of respiratory oxidases is described. It is derived from iron(III) protoporphyrin IX by covalent attachment of a Gly-L-His-OMe residue to one propionic acid substituent and an amino-bis(benzimidazole) residue to the other propionic acid substituent of the porphyrin ring, yielding the Fe(III) complex 1, and subsequent addition of a copper(II) or copper(I) ion, according to needs. The fully oxidized Fe(III)/Cu(II) complex, 2, binds azide more strongly than 1, and likely contains azide bound as a bridging ligand between Fe(III) and Cu(II). The two metal centers also cooperate in the reaction with hydrogen peroxide, as the peroxide adducts obtained at low temperature for 1 and 2 display different optical features. Support to this interpretation comes from the investigation of the peroxidase activity of the complexes, where the activation of hydrogen peroxide has been studied through the phenol coupling reaction of p-cresol. Here the presence of Cu(II) improves the catalytic performance of complex 2 with respect to 1 at acidic pH, where the positive charge of the Cu(II) ion is useful to promote O-O bond cleavage of the iron-bound hydroperoxide, but it depresses the activity at basic pH because it can stabilize an intramolecular hydroxo bridge between Fe(III) and Cu(II). The reactivity to dioxygen of the reduced complexes has been studied at low temperature starting from the carbonyl adducts of the Fe(II) complex, 3, and Fe(II)/Cu(I) complex, 4. Also in this case the adducts derived from the Fe(II) and Fe(II)/Cu(I) complexes, that we formulate as Fe(III)-superoxo and Fe(III)/Cu(II)-peroxo exhibit slightly different spectral properties, showing that the copper center participates in a weak interaction with the dioxygen moiety.     

The coordination chemistry of simple phospholes. Complexes of rhenium,ruthenium, cobalt,rhodium and iridium chlorides and of some chlorocarbonyls of ruthenium and rhodium

The reactions of 1-phenylphosphole (PP), 3-methyl-1-phenylphosphole (mPP), 3,4-dimethyl-1-phenylphosphole (dPP) and, in certain instances, 1-n-butyl-3,4-dimethylphosphole (dBP) with some transition metal chlorides and some metal-Cl-CO systems are reported. These reactions show that simple phospholes in general unexpectedly behave much like ordinary tertiary phosphines and that, unlike the reactions with Ni(II), Pd(II) and Pt(II), the complexes formed are conventional in most respects. However, a few unusual reactions were observed. For example, mPP partially reduces Ru(III) to give a mixed-valent Ru(III)-Ru(II) complex while PP reduces Ir(III) to Ir(I). From infrared spectroscopic studies of the square-planar Rh(I) complexes L₂Rh(CO) Cl (L = phosphole), it appears that donor character decreases with decreasing substitution on the phosphole ring carbon atoms. Phosphorus-phenyl cleavage has been observed in reactions of 1-phenylphosphole with Rh-CO systems. The results are briefly discussed in relation to the behaviour of other phospholes in similar reactions and in the context of the electronic structure of phospholes.     

Tandem mass spectrometric analysis of rare earth(III) complexes: evaluation of the relative strength of their Lewis acidity

Five series of rare earth(III) complexes coordinated with hexamethylphosphoramide, triethylphosphine oxide, trimethyl phosphate, N,N′-dimethylpropyleneurea, or dimethyl sulfoxide were subjected to tandem mass spectrometric analysis. The relative strength of the Lewis acidity of respective rare earth(III) species was evaluated using the peak intensity ratios of the product ions formed from the precursor ions (e.g. [M(OTf)₂(hmpa)₂]⁺). The exceptionally strong Lewis acidity of scandium(III) and ytterbium(III) complexes was clearly indicated by this tandem MS analysis. The analysis also showed that the Lewis acidity of ytterbium(III) is stronger than that of lutetium(III) although the ionic radius of Yb³⁺ is larger than that of Lu³⁺. The gadolinium break and the tetrad effect were observed in the Lewis acidity of the series of the lanthanide(III) complexes.     

ACMA (9-amino-6-chloro-2-methoxy acridine) forms three complexes in the presence of DNA

The interaction of ACMA (9-amino-6-chloro-2-methoxy acridine) (D) with DNA (P) has been studied by absorbance, fluorescence, circular dichroism, spectrophotometry, viscometry and unwinding electrophoresis. A T-jump kinetic study has also been undertaken. The experimental data show that, totally unlike other drugs, ACMA is able to form with DNA three complexes (PD(I), PD(II), PD(III)) that differ from each other by the characteristics and extent of the binding process. The main features of PD(I) fulfil the classical intercalation pattern and the formation/dissociation kinetics have been elucidated by T-jump techniques. PD(II) and PD(III) are also intercalated species but, in addition to the dye units lodged between base pairs, they also bear dye molecules externally bound, more in PD(III) relative to PD(II). A reaction mechanism is put forward here. Comparison between absorbance, fluorescence and kinetic experiments has enabled us to determine the binding constants of the three complexes, namely (6.5 ± 1.1) × 10(4) M(-1) (PD(I)), (5.5 ± 1.5) × 10(4) M(-1) (PD(II)) and (5.7 ± 0.03) × 10(4) M(-1) (PD(III)). The Comet assay reveals that the ACMA binding to DNA brings about genotoxic properties. The mutagenic potential studied by the Ames test reveals that ACMA can produce frameshift and transversion/transition mutations. ACMA also is able to produce base-pair substitution in the presence of S9 mix. Moreover, the MTT assays have revealed cytotoxicity. The biological effects observed have been rationalized in light of these features.     

Chromatographic separation by a new chelating resin containing β-hydroxydithiocinnamic acid

Summary The distribution coefficients of Ag(I), Au(III), Cd(II), Cu(II), Fe(III), Hg(II), Ni(II), Pb(II), Pt(IV), and Zn(II) on a new chelating resin containing -hydroxydithiocinnamic acid at various acidity were studied. In the strongly acidic region, the resin shows high affinity for Ag(I), Hg(II), Au(III) and Pt(IV) and high resistance against air oxidation. The effect of diverse foreign ligands on the sorption of metal ions and the possibility of application to speciation studies with this resin were also considered. Some quantitative separations of Cd-Cu-Pb, Cu-Au and Au-Pt with this resin column were described. Detection of the chromatography system was carried out via post column derivatisation of the column effluent with PAR at 520 nm or direct UV detection of the chloride complexes at 215 nm.     

Synthesis,Spectral, Characterization,and Anticancer Activity of Some Binary and Mixed Ligand Complexes of 4-Methyl-2-Pentanone Thiosemicarbazone and Some Amino Acids

The Schiff base ligand 4-methyl-2-pentanone thiosemicarbazone (MPTSC) (HL) has been synthesized by the interaction of 4-methyl-2-pentanone (MP) and thiosemicarbazone (TSC). The Ni(II), Cu(II), and Fe(III) binary complexes of this ligand have been prepared. The ternary complexes of VO(IV) and Mn(II) ions with HL and glutamine (Glu) as a secondary ligand, in addition to VO(IV), Mn(II), and La(III) with HL and glycine (Gly) as a secondary ligand, have also been synthesized. The binary and ternary complexes have been characterized based on elemental analysis, IR, UV-VIS, molar conductance, mass spectra, magnetic moment, and ESR measurements. The magnetic moment, UV, and ESR studies suggest that Ni(II) and Cu(II) complexes are square planar, whereas Fe(III), Mn(II), and La(III) complexes have octahedral geometry, but VO(IV) ternary complexes have square pyramidal geometry. The analytical data indicate that the metal-to-ligand ratio in binary complexes is 1:1, except HL-Cu(II) chloride complex where the metal-to-ligand to secondary ligand ratio in ternary complexes is 1:1:1. The anticancer studies showed that the anticancer activity is in the decreasing order: ternary complexes > binary complexes > free ligand (HL).

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.