A cation trap for anodic stripping voltammetry: NH3–plasma treated carbon nanotubes for adsorption and detection of metal ions

NH₃–plasma treated multi-walled carbon nanotubes (pn-MWCNTs) with cation traps for the detection of ultratrace quantities of Zn(II), Cd(II), Cu(II), and Hg(II) using square wave anodic stripping voltammetry (SWASV) is described. The pn-MWCNTs use their adsorption performance to enhance the sensitivity. It is found that under optimized conditions Zn(II), Cd(II), Cu(II) and Hg(II) were individually detected at potentials of −1.16, −0.78, −0.268 and 0.108 V, respectively. The detection limit (3σ method) of 0.314, 0.0272, 0.2263, and 0.1439 nM toward Zn(II), Cd(II), Cu(II), and Hg(II) is achievable, respectively. No interference could be seen during the simultaneous detection of Zn(II), Cd(II), Cu(II), and Hg(II). The pn-MWCNTs exhibit excellent selectivity owing to the different ability of adsorption. A study of the ability of pn-MWCNTs in practical application is carried out using a sample of water collected from Dongpu Reservoir in Hefei City, Anhui, China. It is found that the results were favorable when compared against inductively coupled plasma atomic emission spectrometry (ICP-AES) analysis.     

A Thick-Film Carbon-Containing Electrode Modified with Formazan for Determining Copper, Lead, Cadmium, and Zinc

The electrochemical behavior of some hetarylated formazans introduced into the bulk of carbon-containing inks of thick-film screen-printed electrodes was studied. The compositions of complexes formed at the electrode surface were found, and their stability constants were estimated. It was shown that the modification of a carbon-containing thick-film electrode with 1-(o-chlorophenyl)-3-phenyl-5-(6-methyl-4-oxo-pyrimidinyl-2)formazan improves its sensitivity, lowers detection limits for Pb(II), Cu(II), Cd(II), and Zn(II), and ensures high precision of the results of analysis.     

Flame atomic absorption spectrometric determination of Cd(II), Ni(II), Co(II) and Cu(II) in tea and water samples after simultaneous preconentration of dithizone loaded on naphthalene

A simultaneous preconcentration procedure for the determination of Cd(II), Ni(II), Co(II) and Cu(II) by atomic absorption spectrometry is described. The method is based on solid phase extraction of the metal ions on dithizone loaded on naphthalene in a mini-column, elution with nitric acid and determination by flame atomic absorption spectrometry. The sorption conditions including NaOH concentration, sample volume and the amount of dithizone were optimized in order to attain the highest sensitivity. The calibration graph was linear in the range of 0.5–75.0 ng ml^?1 for Cd(II), 1.0–150.0 ng ml^?1 for Ni(II), 1.0–150.0 ng ml^?1 for Co(II) and 1.0–125.0 ng ml^?1 for Cu(II) in the initial solution. The limit of detection based on 3S_b was 0.13, 0.32, 0.33 and 0.43 ng ml^?1 for Cd(II), Ni(II), Co(II) and Cu(II), respectively. The relative standard deviations (R.S.D) for ten replicate measurements of 20 ng ml^?1of Cd(II), 100 ng ml^?1 of Ni(II), Co(II) and 75 ng ml^?1 of Cu(II) were 3.46, 2.43, 2.45 and 3.26%, respectively. The method was applied to the determination of Cd(II), Ni(II), Co(II) and Cu(II) in black tea, tap and river water samples.     

Separation and determination of trace amounts of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates by RP-HPLC

A reversed-phase high-performance liquid chromatographic separation and determination of beryllium(II), aluminium(III) and chromium(III) with chromotrope 2C chelates on a C18-bonded stationary phase is reported. Methanol-water (45:55 v/v) containing 6 x 10(-3)M tetra-n-butylammonium bromide (TBAB) and 2 x 10(-2)M acetate buffer solution (pH 6.0) as mobile phase and with spectrophotometric detection at 530 nm was applied. The method has high sensitivity, the detection limits being 0.2 ppb for beryllium(I), 1 ppb for aluminium(III) and 2 ppb for chromium(III). Under the optimum conditions, most other metal ions did not interfere, e.g. up to 2 mg of Hg(II), Sn(II, IV), Pb(II), Bi(III), Ag(I), Zn(II), Cd(II), Cu(II), 1.5 mg of Fe(II), Co(II), Ni(II), 1.2 mg of Ca(II), Mg(II), Sr(II), Ba(II), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 1 mg of Ga(III), In(III), 0.5 mg of Fe(III), 0.4 mg of Th(IV), Zr(IV). The method can be applied to the simultaneous determination of trace amounts of beryllium(II), aluminium(III) and chromium(III), in water, rice, flour and human hair samples.     

Equilibrium and kinetic properties of a fast iminodiacetate based chelating ion exchanger and its incorporation in a FIA-ICP-AES system

The equilibrium and kinetic properties of an iminodiacetate (IDA) based chelating ion exchanger with a crosslinked agarose, Novarose, as support has been investigated. The second and third acidity constants and some complexation constants of the ligand were determined for adsorbents with metal binding capacities of 140, 55 and 18 micromol ml(-1), respectively. The adsorbent of medium capacity showed fast adsorption and desorption of Cu(II), Cd(II), Ni(II) and Ca(II) both in the batch and column mode. It was found to be about 50 times faster than Chelex-100 (50-100 mesh) in accumulation of these metal ions in the batch mode. Studies of the adsorbent in a flow system, using a 5 mm x 6 mm i.d. column, indicated quantitative accumulation of Cu(II), Cd(II), and Ni(II) at volumetric flow rates up to 110 ml min(-1). Linear calibration curves with r > 0.999 and signal enhancement factors up to 1300 were obtained. Preconcentration by a FIA system connected to an ICP-AES instrument will make simultaneous measurement of ultratrace concentrations of a number of metal ions possible within reasonable cycle times due to the high flow rates which can be used with the adsorbent. Trace amounts of cadmium and copper in tap water were determined successfully at 60 ml min(-1). However, copper and nickel in tap water are strongly complexed and do not accumulate quantitatively even at low flow rates. Hence a sample pretreatment is needed. Copper was completely adsorbed after UV-treatment of the sample.     

Metal-ion chromatography on silica-immobilized 2-pyridinecarboxyaldehyde phenylhydrazone

The chromatographic properties of silica-immobilized 2-pyridinecarboxyaldehyde phenylhydrazone as stationary phase for separation of aqueous metal-ion mixtures containing various combinations of Mn(II), Fe(II), Cd(II), Zn(II), Co(II), Pb(II), and Cu(II) are described. Separations were achieved in many cases by using mobile phases containing chloride or perchlorate anions, at moderate flow-rates. Quantitative chromatographic analysis was possible for a variety of sample types over a wide range of metal-ion concentrations.     

Improved method for the simultaneous absorptiometric determination of cobalt and nickel with quinoxaline-2,3-dithiol

A new, more stable reagent, S-2-(3-mercaptoquinoxalinyl)thiuronium chloride (MQT), is proposed for the simultaneous absorptiometric determination of cobalt and nickel. It is hydrolysed rapidly to quinoxaline-2,3-dithiol (QDT) in ammonia buffer at pH 10. In the presence of zinc(II), QDT is stabilized by complex formation and the reagent blanks are reduced. Samples containing cobalt(II) and nickel(II) react with the mixture on warming to give 1:3 cobalt and 1:2 nickel complexes, with maximum absorbances at 472 and 520 mmu respectively. The sensitivity of the method is high, 0.0017 and 0.0028 mug cm (2) for cobalt and nickel respectively, and there is a significant improvement in accuracy and precision, which is about +/-1 % over a 15-fold change in cobalt to nickel ratio. The selectivity is moderate; Ag(I), Cu(II), Pd(II), Cd(II), Hg(II), Sn(II), Pb(II), Bi(III) and Pt(IV) cause significant interference but most other common cations and anions can be tolerated.     

High-Performance Liquid Chromatography of Copper,Mercury, Nickel,and Cadmium Bisdibenzyldithiocarbamate Complexes

Abstract

High-performance liquid chromatographic separations of Cu (II), Hg(II), Ni(II), and Cd(II) bisdibenzyldithiocarbamates at nanogram levels by adsorption chromatography on silica gel were reported. Lichrosorb Si 60 (10 um) was used as the stationary phase and benzene-cyclohexane mixtures as the mobile phase.     

Preparation, characterization, and application of a new thiol-functionalized ionic liquid for highly selective extraction of Cd(II)

A highly selective thiol-functionalized ionic liquid (thiol-FIL) was synthesized and characterized by FT-IR and ESI mass spectroscopy. The capability of thiol-FIL to extract Cd(II), Ni(II), Cr(III) and Pb(II) was evaluated. It is found that thiol-FIL possesses high selectivity for Cd(II), and this has led to a method for determination of Cd(II) by flame atomic absorption spectrometry that is free of interferences by up to a 1,000-fold excess of Na(I), Mg(II), Ca(II), Mn(II), Fe(III), Al(III), Cu(II), Zn(II), Ni(II), Cr(III), Co(II), As(III), Pb(II), and Hg(II). With extraction equilibrium time of 1 min, a good linearity (r = 0.9998) and a detection limit of 0.39 μg?L^?1 were obtained. The precision (RSD) for 11 replicate measurements of 10 μg?L^?1 Cd was 1.6%. The method was validated using certified reference materials. The recoveries of cadmium in spiked real samples ranged from 97% to 102%.     

Online Solid-Phase Extraction of Cd(II), Cu(II), and Co(II) Using Covalently Attached Bis(salicylaldimine) to Silica Gel for Determination in Food and Water by Flame Atomic Absorption Spectrometry

In this study, a novel sorbent material bearing a bis(aldimine) group was designed and successfully synthesized by covalently bonding a 2-[N,N′-bis(salicylaldimine)]aminoethyl amine ligand to the silica gel surface that was characterized by carbon, hydrogen, and nitrogen elemental analysis, thermogravimetric analysis, and the Fourier transform infrared spectroscopy technique. The sorbent was used for the online solid-phase extraction (SPE) of Cd(II), Cu(II), and Co(II) ions for their determination at trace concentration levels by flame atomic absorption spectrometry. The effective factors for the online SPE such as the pH and the flow rate of the sample solution, and type, volume, and flow rate of eluent were investigated. The concentration levels of Cd(II), Cu(II), and Co(II) were measured in certified reference materials including Virginia tobacco leaves (CTA-VTL-2) and water-trace elements (NWTM-15.2) to validate this method. The metal levels in environmental water were determined by this method, and the values were checked by spiking and recovery experiments and independent analysis by inductively coupled plasma-mass spectrometry. The adsorption capacities of the sorbent were found to be 41.2, 31.6, and 25.6?mg/g for Cd(II), Cu(II), and Co(II), respectively. This method was also successfully used for the determination of Cd(II), Cu(II), and Co(II) concentrations in rice and molasses.     

Competitive adsorption behavior of heavy metals on kaolinite

Polluted and contaminated soils can often contain more than one heavy metal species. It is possible that the behavior of a particular metal species in a soil system will be affected by the presence of other metals. In this study we have investigated the adsorption of Cd(II), Cu(II), Pb(II), and Zn(II) onto kaolinite in single- and multi-element systems as a function of pH and concentration, in a background solution of 0.01 M NaNO3. In adsorption edge experiments, the pH was varied from 3.5 to 10.0 with total metal concentration 133.3 microM in the single-element system and 33.3 microM each of Cd(II), Cu(II), Pb(II), and Zn(II) in the multi-element system. The value of pH50 (the pH at which 50% adsorption occurs) was found to follow the sequence Cu相似文献   

双显色体系-双波长分光光度法研究

本文提出了一种新的光度分析法-双显色体系-双波长分光光度法,其波长对的组合为两个完全独立的显色体系.通过选择适当的R,L体系,可使该法有效地排除干扰,提高测定灵敏度.本文对提出的方法进行了理论推导和实验验证.     

Adsorption of Me-HEDP complexes onto gamma-Al2O3

This work studies the adsorption of Me-1-hydroxiethane-(1,1-diphosphonic acid) (HEDP) complex onto alumina in the pH range from 5.0 to 9.5. The extent of HEDP adsorption is not significatively affected by the presence of Me(II), while, HEDP has an interesting effect on Me(II) adsorption. At high surface covering, Cu(II) adsorption is enhanced at low pH reaching a maximum of 57% at pH nearly 6, however, at pH>6 a decrease about 20% in the amount of Cu(II) adsorbed takes place by the presence of HEDP. The model predicts a ternary surface complex (AlLCu(-)) to justify the increase of Cu(II) adsorbed at lower pH. At the lower pH and at high Zn(II) concentration the presence of equimolar concentration of HEDP also causes a discernible increase in the amount of Zn(II) adsorbed. At pH 5, the percentage of Zn(II) complexed with HEDP increased from negligible to 40% as the HEDP concentration increased. However, in this case the HEDP does not have a suppressor effect on the Zn(II) adsorption at the higher pH. Again, the presence of anionic-type complexation is here postulated to reach a good fit with the experimental results. The effect of HEDP over Zn(II) adsorption becomes less pronounced with the excess of surface sites. Cd(II)-HEDP solution complexes are weaker than those corresponding to Cu(II) and Zn(II), so competitive effects between surface and solution are much less significant in comparison to Cu(II)-HEDP and Zn(II)-HEDP alumina systems. So, the effect of HEDP on the Cd adsorption at low concentration and low pH is more stressed than in the case of Cu(II) and Zn(II). Overall, results indicate that the presence of HEDP in the aquatic systems could have a significant impact on the mobility and distribution of Cu(II), Zn(II) and Cd(II) in the environment.     

A pre-enrichment procedure using diethyldithiocarbamate-modified TiO2 nanoparticles for the analysis of biological and natural water samples by ICP-AES

In this article, a new method that utilizes a diethyldithiocarbamate-modified nanometre TiO₂ (TiO₂–DDTC) as solid-phase extractant has been developed for simultaneous preconcentration of trace Cu(II), Pb(II), Zn(II), and Cd(II) prior to measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The separation/preconcentration conditions of analytes, which include the effects of pH, sample flow rate and volume, elution conditions, and interfering ions on the recovery of the analytes, were investigated. At pH 5, the adsorption capacity of modified nanometre TiO₂–DDTC was found to be 6.2, 19, 4.7, and 6.0?mg/g for Cu(II), Pb(II), Zn(II), and Cd(II), respectively. According to the definition of IUPAC, the detection limits (3σ) of this method for Cu(II), Pb(II), Zn(II), and Cd(II) were 0.41, 1.7, 0.39, and 0.52?ng/mL, respectively. The proposed method achieved satisfied results when applied to the determinations of trace Cu(II), Pb(II), Zn(II), and Cd(II) in biological and natural water samples.     

Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose

The aim of the present study was to investigate the adsorption properties of aminopropyltriethoxysilane (APS) modified microfibrillated cellulose (MFC) in aqueous solutions containing Ni(II), Cu(II) and Cd(II) ions. The modified adsorbents were characterized using elemental analysis, Fourier transform infrared spectroscopy, SEM and zeta potential analysis. The adsorption and regeneration studies were conducted in batch mode using various different pH values and contact times. The maximum removal capacities of the APS/MFC adsorbent for Ni(II), Cu(II), and Cd(II) ions were 2.734, 3.150 and 4.195 mmol/g, respectively. The Langmuir, Sips and Dubinin-Radushkevich models were representative to simulate adsorption isotherms. The adsorption kinetics of Ni(II) Cu(II), and Cd(II) adsorption by APS/MFC data were modeled using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetics equations. The results indicate that the pseudo-second-order kinetic equation and intra-particle diffusion model were adequate to describe the adsorption kinetics.     

Amperometric detection of unithiol complexes of heavy metals in high-performance liquid chromatography

It was demonstrated that Pb(II), Cd(II), Hg(II), Ni(II), Co(II), and Cu(II) can be indirectly determined as their unithiol complexes by amperometric detection under static and HPLC conditions. Factors affecting the Chromatographic separation and amperometric detection of metal complexes of unithiol were studied. Two designs of flow electrochemical cells (thin-layer and wall-jet cells) and three electrode materials (platinum, graphite, and glassy carbon) were compared. The best sensitivity was attained for an amperometric detector with wall-jet flow cell and a graphite indicator electrode. The detection limits for Hg(II), Pb(II), and Cd(II) were 0.9, 0.3, and 0.1 μg/mL, respectively. The Chromatographic determination of heavy metals in a sample of waste water was carried out using the amperometric detector     

Preparation,Properties and Thermal Decompositions of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) Complexes of 2,5-dichlorobenzoic Acid

Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) 2,5-dichlorobenzoates were prepared and their compositions and solubilities in water at 295 K were determined. The IR spectra and X-ray diffractograms of the obtained complexes were recorded. The complexes of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) were obtained as solids with a 1:2 molar ratio of metal to organic ligand and different degrees of hydration. When heated at a heating rate of 10 K min^-1, the hydrated complexes lose some (Co, Zn) or all (Ni, Cu, Cd) of the crystallization water molecules and then decompose to oxide MO (Co, Ni) or gaseous products (Cu, Zn, Cd). When heated at a heating rate of 5 K min^-1, the complexes of Ni(II) and Cu(II) lose some (Ni) or all (Cu) of the crystallization water molecules and then decompose directly to MO. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chemically modified silica gel with aminothioamidoanthraquinone for solid phase extraction and preconcentration of Pb(II), Cu(II), Ni(II), Co(II) and Cd(II)

Silica gel chemically bonded with aminothioamidoanthraquinone was synthesized and characterized. The metal sorption properties of modified silica were studied towards Pb(II), Cu(II), Ni(II), Co(II) and Cd(II). The determination of metal ions was carried out on FAAS. For batch method, the optimum pH ranges for Pb(II), Cu(II) and Cd(II) extraction were ≥3 but for Ni(II) and Co(II) extraction were ≥4. The contact times to reach the equilibrium were less than 10 min. The adsorption isotherm fitted the Langmuir's model showed the maximum sorption capacities of 0.56, 0.30, 0.15, 0.12 and 0.067 mmol/g for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively. In the flow system, a column packed modified silica at 20 mg for Pb(II) and Cu(II), 50 mg for Cd(II), 60 mg for Co(II), Ni(II) was studied at a flow rate of 4 and 2.5 mL/min for Ni(II). The sorbed metals were quantitatively eluted by 1% HNO₃. No interference from Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ at 10, 100 and 1000 mg/L was observed. The application of this modified silica gel to preconcentration of pond water, tap water and drinking water gave high accuracy and precision (%R.S.D. ≤ 9). The method detection limits were 22.5, 1.0, 2.9, 0.95, 1.1 μg/L for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively.     

Sensitivity of metal thiolate piezoquartz sensor coatings to hydrocarbons, methanol, and water

Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), Ag(I), and Pb(II) octadecylthiolates were used as chemical coatings for piezoquartz (PQR) sensors sensitive to hydrocarbon, alcohol, and water vapors. The sensitivity of these PQR sensors in a stationary flow mode at 25 °C varies from 0.5 to 5 Hz/(mg/L) depending on the composition of the coating and nature of the analyte. An array of eight PQR sensors with these coatings gives a sensor image of the corresponding analyte, which hardly varies with the analyte concentration. The sensitivity of the PQR sensors with the coatings studied changed by no more than 10–15% upon storage for several months. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 6, pp. 371–376, November–December, 2006.     

Evaluation of biacetyl(2-pyridyl)hydrazone thiosemicarbazone as spectrophotometric analytical reagent

Summary The synthesis and analytical properties of biacetyl(2-pyridyl)hydrazone thiosemicarbazone (BPHT) have been studied. A spectrophotometric method has been used to determine the protonation constants of the reagent and a Spectrophotometric survey of the reactions of various cations with BPHT has been made. BPHT gives coloured complexes with various cations such as Ni(II), Co(II), Fe(II), Cu(II), Pd(II), Zn(II), Cd(II), In(III). The sensitivity has been compared with that of other analogous reagents of the biacetyl type.