Adsorption of polyethylene glycol on platinum electrode from acidic solutions

The effect of the molecular mass of polyethylene glycol (PEG) on its adsorption on platinized platinum from aqueous solutions of 0.5 M H₂SO₄ and 1 M HCl is studied using the methods of open-circuit potential shifts and voltammetry. In sulfuric acid solutions, the PEG adsorption is accompanied by dehydrogenation and hydrogenation processes, which probably involve the terminal groups of polymers. For PEG with the molecular mass of 600–40000, the established stationary surface states turn out to be close to one another. Anions Cl^? inhibit the PEG adsorption and electrooxidation. The adsorption behavior of PEG samples studied substantially differs from that of ethylene glycol under comparable conditions.     

Adsorption and electrooxidation of dimethyl ether on platinized platinum electrode in sulfuric acid solution

Adsorption and oxidation of dimethyl ether (DME) on the Pt/Pt electrode from 0.5 M H₂SO₄ is studied by measuring transients of current and potential, charging curves, and curves of electrooxidation in the adsorbed layer and also by cyclic voltammetry and steady-state polarization measurements. The DME adsorption is accompanied by dehydrogenation and destruction of its molecules to form a chemisorbed adsorbate that mainly consists of C1 species (HCO_ads and/or CO_ads) with (under certain conditions) a small amount of species that desorb at cathodic polarization. The adsorption and electrooxidation of DME are inhibited by adsorbed oxygen. The possible schemes of DME oxidation, where the reaction of DME chemisorption products with adsorbed oxygen-containing species is the limiting stage, are discussed.     

Adsorption of sodium phenylanthranylate on gold electrode from aqueous solution

Adsorption of sodium phenylanthranylate on a gold electrode from a borate buffer solution is studied using the methods of ellipsometry and piezo-quartz nanobalance. Statistical evaluation of adequacy between the obtained experimental isotherms and theoretical models is performed using the F-test. It is shown that they are adequately described using the Frumkin and Temkin equation.     

Multi-electron oxidation of formaldehyde on a platinum electrode

The time evolution of a self-sustained potential oscillation under constant current oxidation of formaldehyde was observed on the rotating ring disk electrode assemble. Under the condition when the potential was controlled, the laser deflection voltammogram as well as the conventional cyclic voltammogram were measured. The mechanism of the multi-electron oxidationof formaldhyde on a platinum electode is discussed.     

Behaviour of the platinum electrode as a pH electrode

The platinum wire electrode behaves as a good pH electrode in the titration of 1.0 and 0.1N sulphuric or hydrochloric acid with the equivalent concentration of sodium hydroxide. The efficiency is greater when sulphuric acid is used. The end-points obtained are very close to those obtained with a glass-calomel system.     

Electrochemical behaviour of 4-nitrosopyridine-1-oxide on platinum electrode in aqueous solution

The study of electrochemical behaviour of nitrosopyridine-1-oxide on platinum electrodes in aqueous solutions is reported. The techniques of voltammetry, controlled potential coulometry and visible and u.v. spectroscopy were used. The results obtained are consistent with the hypothesis that the first of the two reduction processes involves a chemical reaction between the depolarizer and the product of the electron transfer, while the second one is due to the reduction of the product of the preceding chemical reaction.     

The mechanism of electrodeposition of cadmium sulphide on inert metals from dimethylsulphoxide solution

The mechanism, of electrodeposition of CdS on Hg, and Pt electrodes has been studied in dimethylsulphoxide solutions by performing cyclic voltammetry at stationary electrodes and pulse polarography at dropping Hg electrodes in solutions containing both Cd(II) ions and elemental sulphur. Evidence is presented to demonstrate that sulphur is chemisorbed at these electrodes and that formation of at least a monolayer of metal sulphide is probable. As a result, formation of the initial layer of CdS involves reaction of Cd(II) ions with chemisorbed sulphur or with a pre-existing layer of metal sulphide. Data for the formation of CdS are compared with those obtained for the formation of PbS and ZnS.     

Adsorption of alkanes on a bismuth electrode from an alcoholic medium

The adsorption of higher alkanes (from C₁₀H₂₂ to C₂₁H₄₄) on a polarized bismuth electrode was studied from methanolic, ethanolic and n-butanolic solutions of LiClO₄ by differential capacity measurements. Alkane molecules, which do not contain either polar groups or double bonds, are compounds of low chemical activity. The adsorption of this group of compounds is purely physical. Nevertheless, a considerable difference in their adsorption activity on the various areas of the electrode surface caused by the two types of bond (metallic and covalent) between the atoms in the bismuth crystal lattice was discovered. Such a large difference indicates the different wettabilities of the separate single-crystal faces by alkanes. A weak dependence of the interaction parameter in the Frumkin isotherm on the length of the alkane molecule as well as on the length of the hydrocarbon chain of the solvent molecule was established. Various adsorption effects at high bulk concentrations of adsorbate (desolvation of the cations of the supporting electrolyte, thickening of the adsorption layer, maximum in the isotherm) were analysed.     

Adsorption of naphthalene on bismuth electrode from ethanol

Adsorption of naphthalene on a polarized bismuth electrode was studied from the ethanolic solutions of LiClO₄ by means of differential capacity measurements. Two regions of adsorption of naphthalene (13.2 and ?1.3 μC cm^?2) corresponding to different orientations of naphthalene molecules at the electrode surface were discovered. A sharp capacity maximum at far positive charges indicates that formation of a polymolecular adsorption layer consisting of the adsorbed naphthalene molecules in flat orientation occurs. By use of the Gibbs equation and of double layer theory the surface excess of naphthalene, adsorption energy, potential drop across the inner layer and some other adsorption parameters have been calculated for a wide range of charges. The π-oribital interaction energy of naphthalene with the bismuth surface has been estimated for various charges. A comparison of the adsorption behaviour of naphthalene in ethanolic and aqueous solutions was made.     

Fibrils separated from polyacrylonitrile fiber by ultrasonic etching in dimethylsulphoxide solution

A novel method for the separation of polyacrylonitrile (PAN) fibrils from fibers by ultrasonic etching in a 90 wt % aqueous dimethylsulphoxide (DMSO) solution at 75 °C ± 2 °C for 6 h with a frequency of 40 kHz is demonstrated. These fibrils with a diameter of about 450 nm were systematically investigated by field emission scanning electron microscopy (FESEM), high resolution transmission electron microscopy (HRTEM), and wide‐angle X‐ray diffraction (WAXD). It was found that the fibrils consisted of microfibrils with about 200 nm diameter, including periodic lamellae with thickness of 30–45 nm perpendicular to the fiber axis. The PAN fiber crystallinity and crystal size slightly decreased under the ultrasonic etching. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 617–619, 2010     

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y相似文献   

The adsorption of carbon monoxide on a platinum electrode

The adsorption of CO from 0.5 M H₂SO₄ solution on platinum has been studied using CO labelled with C-14. The adsorption of CO on Pt occurs in the potential range of hydrogen adsorption as well as in the double layer region. In the whole potential range the rate of adsorption follows first order kinetics. From the surface concentrations and charges for oxidation of adsorbed species it follows that the product of chemisorption consists at least of two kinds of species. One of them is the COOH radical probably formed by the reaction of CO with water.     

Adsorption of polydimethylsiloxanes from solution on glass

The adsorption of polydimethylsiloxane polymers from solution on glass has been studied. The amount of polymer adsorbed depends markedly on the solvent because of specific solvent—surface interactions. The presence of silanol groups in the polymer, particularly as endgroups, markedly increases the amount of polymer adsorbed. Large differences are shown between the adsorption of the commercially available, and fully trimethylsilylated polydimethylsiloxanes of narrow molecular weight distribut on. Possible adsorption mechanisms are discussed.