A comparative study of interaction of ibuprofen with biocompatible polymers

In this paper we are reporting the interaction of a non-steroidal anti-inflammatory drug ibuprofen (IBF) with various biocompatible polymers. Being amphiphilic, the drug interacts with the polymers similar to the interaction of surfactants and polymers. Therefore, we have considered the polymer-amphiphile interaction approach using conductimetry. The polymers of different charges (cationic, anionic, and nonionic) have been taken for the study. It was found that the critical aggregation concentration (cac) decreases on increasing the polymer concentrations of cationic as well as nonionic polymers whereas it increases for anionic polymers. The results imply that anionic IBF interacts with cationic and nonionic polymers more strongly as compared to the anionic polymers. A possible anionic-anionic repulsion is responsible for the weak interaction of IBF with anionic polymers. On the other side, the critical micelle concentration (cmc) increases for all polymers which is a usual indication of the interaction between amphiphiles and polymers. Free energies of aggregation (ΔG_agg) and micellization (ΔG_mic) were also computed with the help of degrees of micelle ionization obtained from the specific conductivity - [IBF] isotherms.     

Functional monomers and polymers. XXXXVII. Complex formation of stereoregular methacryloyl-type polymers containing nucleic acid bases

The complex formation between a poly(N-β-methacryloyloxyethyl) derivative of adenine with one of thymine or uracil was studied in dimethyl sulfoxide and ethylene glycol mixture by ultraviolet (UV) spectroscopy. For the polymer pairs containing complementary nucleic acid bases both hypochromicity and hyperchromicity were found. Stereoregularity of the polymers, as well as the conditions for measurement of, for example, solvent, temperature, and time, affected the complex formation. Both inter- and intramolecular interaction of polymers in solution were discussed in some detail.     

Preparation of phosphorus-containing polymers—XVI. Synthesis of phosphorus-containing polyanhydride-imides

Phosphorus-containing polyanhydride-imides were synthesized from N,N-bis(4-carboxyphthalimido)-3,3′-diphenylalkylphosphine oxide, 3,3′-[N,N′-bis(4-carboxyphthalimido)]benzophenone and their mixtures in two steps via the diacetyl derivatives of the bisimide-carboxylic acids. The resulting polymers have reduced viscosities of 0.06–0.14 dl/g and are soluble in polar aprotic solvents such as DMA, DMF and DMSO, and conc. H₂SO₄ etc. They have good hydrolytic stability for moisture and water. Phosphorus-containing polymers have little heat-resistance and poor flame-retardance. The benefit of incorporating phosphorus in the polymers is small.     

New photochromic polymers

New photochromic polymers were synthesized by quaternization of amino groups of N-methyldiethanolamine polyterephthalate with a mixture of bis(2,5-dimethyl-4-chloromethyl-3-thienyl)-1,3-dioxol-2-one and p-or m-xylylene dichloride. The spectral-kinetic studies of coatings based on the obtained polymers showed that these coatings have photochromic properties, the efficiency of which decreases with an increase in the sample thickness.     

Chiral recognition of octadentate Na complex with tetra-armed cyclen by molecularly imprinted polymers

Chiral indanyl substituted tetra-armed cyclens (TAC) formed octadentate complexes with Na⁺. Since their four side arms stand up and are bundled to form quadruplicated helical structures, they can have Δ- or Λ-types enantiomers based on complex helicity. In this study, TAC-imprinted polymers were prepared using an ion-pair complex of the sodium salt of (S)-indanyl substituted TAC (TAC(S)) and 2-sulfoethyl methacrylate as a template, and ethylene glycol dimethacrylate as a cross-linker. Affinity of the obtained polymers for the TAC Na⁺ complexes was evaluated chromatographically and the imprinted polymer gave longer retention time for the template than that for its antipode where the separation factor was given to be 1.29-1.45 under the NaOH concentrations of 10-25 mM in the eluent. These results indicate that the imprinted polymer could discriminate helix structures of TAC Na⁺ complexes.     

Studies on polyyne polymers containing transition metals in the main chain. VII. Synthesis and characterization of palladium-polyyne polymers

Metal-polyyne polymers consisting of palladium and conjugated acetylenic systems, where P_D and R represent the —Pd(PBu₃)₂—moiety and alkyl groups, respectively, were prepared by polycondensation between palladium chlorides and α,ω-diethynyl compounds in amines using a catalytic amount of cuprous iodide. The molecular weights of the polymers formed were greatly affected by the basicity of the amines and the addition of free phosphines to the polymerization system. Under the optimum conditions, i.e., in the presence of CuI and PBu₃ (in molar ratio 1/4) in piperidine at room temperature, polymer Ia (R¹ = R² = H) having M?_w = 29,000 was obtained.     

Thermotropic liquid crystalline polymers. I. Cholesterol-containing polymers and copolymers

An approach to the creation of thermotropic cholesterol-containing liquid crystalline polymers by the chemical binding of cholesterol molecules with side chains of comblike polymers is presented. This type of structure permits a decrease in the steric hindrances provided by the backbone chains for the purpose of realizing the liquid crystalline state. A number of new cholesteric esters of poly(N-methacryloyl-ω-aminocarbonic acid)s (PChMAA-n) with different side-chain lengths (n = 2–11) as well as a series of copolymers of ChMA-n with n-alkylacrylates and n-alkylmethacrylates have been synthesized. The experimental evidence of liquid crystalline structure formation in these polymers in glass, viscoelastic, and fluid states is discussed. Molecular and supermolecular structures of cholesterol-containing comblike polymers have been studied and the model of macromolecular packing in the liquid crystalline state is proposed. It is shown that the existence of a layered order of side methylene groups together with ordering of cholesterol groups is necessary to the production of the liquid crystalline state in these polymers.     

Studies of silicon-containing maleimide polymers: 1. Synthesis and characteristics of model compounds

A series of the (N-maleimido phenoxy)silane monomers were synthesized by a two-step reaction for using as the application of flame retardant, functional modifier, or a photoresist material in deep-UV region. All of the monomers with maleimide ring were polymerized by radical polymerization in toluene solution using 2,2′-azobisisobutyronitrile (AIBN) as initiator so as to prepare homopolymers. The structures of the maleimide monomers were identified by ¹H, ¹³C, ²⁹Si NMR and element analysis. The chemical structures of polymers were identified by Fourier transform infrared reflection (FT-IR) spectroscopy. The molecular weight distributions of polymers were measured by gel permeation chromatography (GPC) equipment. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to analyze the thermal properties of the polymers. The degree of polymerization in silicon-containing maleimide polymers should be affected by side chains. The introduction of alkylsilane into a side chain of maleimide polymer may reduce the glass transition temperature (T_g) and thermal stability, but increase char yield of solid residue as an excellent flame retardant.     

Electrochemical behaviour of conducting polymers obtained into clay-catalyst layers. An in situ Raman spectroscopy study

In this paper we present the study of the electrochemical properties of the following conducting polymers: poly(o-anisidine), polyaniline and copolymers of aniline and o-anisidine obtained by a new synthetic method. The polymers are synthesized in free-of-acid conditions, using an activated montmorillonitic clay catalyst, known as Maghnite-H⁺ (Mag-H) as proton source. The electrochemical behaviour of poly(o-anisidine) created using Mag-H (PoANI-MagH) and their copolymers with aniline is quite different of those polymers created in HCl solution. In situ Raman data suggest that the structure of PoANI-MagH is a mixture of conducting (polyaniline-type) and redox (phenoxazine or phenazine-type) segments.     

Polymerizations of substituted cyclopropanes. I. Radical polymerization of 1,1-disubstituted 2-vinylcyclopropanes

Diethyl 2-vinylcyclopropane-1,1-dicarboxylate (Ia), 2-vinylcyclopropane-1,1-dicarbonitrile (Ib), ethyl 1-cyano-2-vinylcyclopropanecarboxylate (Ic), and 1,1-diphenyl-2-vinylcyclopropane (Id) were radically homo- and copolymerized. Ia, Ib, and Ic polymerized cleanly in 1,5-type ring-opening fashion to yield polymers of high molecular weight. Id failed to homopolymerize but copolymerized with common monomers which included maleic anhydride. Infrared (IR) spectra indicated that the double bonds of the polymer chains were in trans form. All polymers were soluble in solvents and solution-cast films were clear and flexible, showing T_g values in the 25–40°C range. Model reactions of those monomers with benzenethiol also indicated predominant 1,5-addition reactions. From the results of our investigation it was concluded that the driving force for the facile radical 1,5-polymerization of Ia, Ib, and Ic was the stabilization of growing radicals by two substituents.     

Metallocene monomers and polymers. Ferrocenyl and ferrocenylene derivatives

The synthesis and study of some polyenes, polýiminoimides and Schiff polybases with ferrocene obtained by either polymerization or polycondensation are reported.The following monomers were used: ethynylferrocene, 1-chloro-1′-ethynyl-ferrocene, α-chloro-β-formyl-p-ferrocenylstyrene, p-ferrocenylphenylacetylene, p-ferrocenylacetophenone, 1,1′-diacetylferrocene and 1,1′-bis[β-(2-furyl)acryloyl]ferrocene which were characterized by spectral and thermodifferential analyses and Hückel MO calculations. The polymerization was performed in the presence of benzoyl and lauroyl peroxides, triisopropylboron and complex catalysts of [P(C₆H₅)₃]₂ NiX₂ type. The ferrocene derivatives were polycondensed with biuret, 4,4′-diaminodiphenyl ether, 4,4′-diaminodiphenyl thioether, 4,4′-diamino-2,2′-dinitrodiphenyl disulphide in the presence of metallic salts and p-toluene sulphonic acid as catalysts.Polymers with either linear or tridimensional structure showing good thermal stability and semiconducting properties have been obtained. Some polymers show catalytical activity in the polymerization of chloroformylated vinylic derivatives.     

Chelate polymers. VI. New copolymers of the some siloxane containing bis(2,4-dihydroxybenzaldehyd-imine)Me with bis(p-carboxyphenyl)diphenylsilane

New high complex polymeric structures containing metal chelate sequences alternating, through esteric bridges, with silane units were obtained. The azomethine of 2,4-dihydroxybenzaldehyde with 1,3-bis(aminopropyl)tetramethyldisiloxane has been synthesized and in situ complexed with copper (II), nickel (II), cobalt (II) and cadmium (II). The obtained bis-phenolic chelates were covalently inserted in polymeric linear structures by their polycondensation with bis(p-carboxyphenyl)diphenylsilane as a diacid chloride. The structures of the obtained polymers were confirmed by IR, UV, ¹H NMR and elemental analysis. The characterization was made by TGA, DSC, solubility tests and GPC. The electrical conductivity of both chelate monomers and their polymers was investigated, all compounds showing typical semiconducting behaviors.     

Water‐soluble conjugated polymers: Synthesis and optical properties

Two sets of water‐soluble poly(phenylene vinylene)s were synthesized and their optical properties were studied. The aqueous solubility of all these polymers is rendered by pendant sulfonate groups. One set of polymers (polymer I series) contains, in addition to the sulfonate pendants, dimethoxy substituents, while the other (polymer II series) contains oligo(ethylene oxide) side chains. Within each set, polymers containing lithium (Ia and IIa), sodium (Ib and IIb), and potassium (Ic and IIc) counter ions were prepared. The two sets of polymers showed different properties from physical appearance (fiber vs film) to thermal properties and to optical properties. It was found that set I polymers, with shorter side chains, exhibit stronger aggregation in aqueous solutions than set II polymers, which led to their lower fluorescence quantum yields and lower polymer‐to‐MV²⁺ quenching efficiencies. Within each set, the effect of counter ions on optical properties was noted. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5123–5135, 2007     

Synthesis of polymers containing tertiary phosphine oxides using complex bases

Tertiary phosphine oxides have been prepared in excellent yield from primary alkyl halides or aromatic halides and activated sodium phosphinates obtained by reaction of dialkyl phosphine oxides with complex bases (NaNH₂/tBuONa). This reaction has been successfully applied to soluble and cross-linked bromopolystyrenes and to macroporous polystyrenes with bromooctyl substituents giving polymers which contain pendant phosphine oxide groups.     

Recognition of molecularly imprinted polymers for a quaternary alkaloid of berberine

Selective and affinitive imprinted polymers incorporating a quaternary alkaloid of berberine (BER) were prepared using a non-covalent imprinting method. The results showed that, compared to other imprinted polymers, the polymer AD-10 had not only a higher of the ratio of Q_MIP/Q_BP for BER adsorption, and but also a larger of the ratio of Q_MIP,B/Q_MIP,P for BER and palmatine (PAL) adsorptions. Spectrophotometric analysis demonstrated that a 1:1 cooperative hydrogen-bonding complex might be predominating in the pre-polymerization between the BER template and AA monomer. Adsorption experiments of BER on the polymer AD-10 were in accordance with the second-order and Langmuir adsorption models. The E value (5.70 kJ/mol) calculated from the Dubinin-Radushkevich model indicated that the adsorption followed a physisorption process. In addition, a Scatchard plot showed a single straight line with an equilibrium dissociation constant (K_D) of 65.80 μmol/L. SPE analyses of a mixture of BER and PAL and the methanol extract from the cortices of Phellodendron wilsonii showed that AD-10 had more efficiency, and higher specificity and selectivity for SPE in the concentration and determination of BER and its extraction from natural products.     

Synthesis of biocidal polymers containing metal NPs using an electron beam

Metal containing antibacterial polymers were prepared by the polymerization of methylmethacrylate and methacrylic acid with copper or zinc. When the thin film of the polymers coated on a glass was irradiated with an electron beam, nanoparticles were obtained. It was found that these polymers exhibited a potent antibacterial activity against the Gram-negative bacteria, Escherichia coli. The metal containing polymers showed a 99.999% (5.0 logs) reduction in E. coli at a contact time of 12 h.In addition, polymers had a good antifouling effect against marine organisms.     

Preparation of molecularly imprinted polymers with thiourea group for phosphate

Molecularly imprinted polymers selective for phosphate were prepared with the two types of functional monomers, 1-allyl-2-thiourea and N-methyl-N′-(4-vinylphenyl)-thiourea, and the binding abilities of the polymers were evaluated. Phenylphosphonic acid or diphenyl phosphate were used as the template molecules and the imprinted polymers prepared with 1-allyl-2-thiourea as functional monomer showed high binding ability to phosphate in aqueous media and nearly 90% of phosphate could be recovered. Also, the imprinted polymer prepared with N-methyl-N′-(4-vinylphenyl)-thiourea as functional monomer had a high binding ability and specific interaction with phosphate in acetonitrile solution and over 90% of phosphate-derivatives could be recovered selectively.     

Waterborne RAFT polymers

A recently invented novel family of RAFT (Reversible Addition-Fragmentation chain Transfer) agents having a common formula Z-C(S)-S-CR₂COOR¹ where Z = -SR, -NR₂, or -OR, and R¹ represents H or a variety of functional groups allows for tailoring their hydrophilicity-hydrophobicity balance. A limited hydrophilicity of the RAFT agents can be achieved which is sufficient for their diffusion through water, yet the agents are hydrophobic enough to phase-separate out of water. Thus, the limited hydrophilicity of otherwise hydrophobic agents allows them to be at the loci of polymerization making them suitable for the emulsion polymerization mechanism. With several RAFT agents, good control over molecular weight was demonstrated for a broad variety of ab initio acrylic emulsion polymers. For methyl methacrylate, a portion of RAFT did not engage, resulting in less than the theoretical number of polymer chains. It was found, however, that as little as ∼10 wt% of an acrylic monomer slowed down polymerization enough to engage all RAFT agent molecules and yield predicted molecular weights. A broad variety of colorless and odorless telechelic acrylic and methacrylic emulsion polymers were synthesized.Microemulsion and solution-dispersion techniques produced clean colloidally stable RAFT dispersions. These two techniques did not require RAFT agents with tailored hydrophilicity-hydrophobicity.The UV spectra and photooxidative stability of the RAFT polymers were studied. The RAFT fragment in polymers appeared to have no impact on their photooxidative stability.     

Anisotropic rotation of spin-probes in polymers

The observed change in the ESR spectra of a nitroxide spin-probe as it passes through the transition >T_g found in amorphous polymers is explained in terms of a change in the anisotropic rotation of the probe. The degree of anisotropy factor ? is calculated for various polymers and probes, and shows the most marked change with Tempol Benzoate (I) in atactic polypropylene and plasticized polystyrene. Results for a steroid nitroxide probe are also presented.