A Non‐Enzymatic Hydrogen Peroxide Sensor Based on Gold Nanoparticles/Carbon Nanotube/Self‐Doped Polyaniline Hollow Spheres

In this study, a novel non‐enzymatic hydrogen peroxide (H₂O₂) sensor was fabricated based on gold nanoparticles/carbon nanotube/self‐doped polyaniline (AuNPs/CNTs/SPAN) hollow spheres modified glassy carbon electrode (GCE). SPAN was in‐site polymerized on the surface of SiO₂ template, then AuNPs and CNTs were decorated by electrostatic absorption via poly(diallyldimethylammonium chloride). After the SiO₂ cores were removed, hollow AuNPs/CNTs/SPAN spheres were obtained and characterized by transmission electron microscopy (TEM), field‐emission scanning electron microscopy (FESEM) and Fourier transform infrared spectroscopy (FTIR). The electrochemical catalytic performance of the hollow AuNPs/CNTs/SPAN/GCE for H₂O₂ detection was evaluated by cyclic voltammetry (CV) and chronoamperometry. Using chronoamperometric method at a constant potential of ?0.1 V (vs. SCE), the H₂O₂ sensor displays two linear ranges: one from 5 µM to 0.225 mM with a sensitivity of 499.82 µA mM^?1 cm^?2; another from 0.225 mM to 8.825 mM with a sensitivity of 152.29 µA mM^?1 cm^?2. The detection limit was estimated as 0.4 µM (signal‐to‐noise ratio of 3). The hollow AuNPs/CNTs/SPAN/GCE also demonstrated excellent stability and selectivity against interferences from other electroactive species. The sensor was further applied to determine H₂O₂ in disinfectant real samples.     

The Synergistic Effect of a Bimetallic Catalyst for the Synthesis of Carbon Nanotube Aerogels and their Predominant Chirality

Synthesis of continuous spinnable carbon nanotube (CNT) fibers is the most promising method for producing CNT fibers for commercial applications. The floating-catalyst chemical vapor deposition (FC-CVD) method is a rapid process that achieves catalyst formation, CNT nucleation and growth, and aerogel-like sock formation within a few seconds. However, the formation mechanism is unknown. Herein, the progress of CNT fiber formation with bimetallic catalysts was studied, and the effect of catalyst composition to CNT fiber synthesis and their structural properties was investigated. In the case of bimetallic catalysts, the carbon source rapidly decomposes and generates various secondary hydrocarbon species, such as CH₄, C₂H₄, C₂H₂, C₃H₆, and C₄H₁₀ whereas monometallic catalysts generate only CH₄ and C₂H₄ on decomposition. CNT fiber formation with Fe₁Ni₀ begins about 400 mm from the reactor entrance, whereas CNT formation with Fe_0.8Ni_0.2 and Fe_0.5Ni_0.5 begins at about 500 and 300 mm, respectively. The formed CNT bundles and individual CNTs are oriented along the gas flow at these locations. The enhanced rate of fiber formation and lowering of growth temperature associated with bimetallic catalysts is explained by the synergistic effects between the two metals. The synthesized CNTs become predominantly semiconducting with increasing Ni contents.     

Promotion of Mn Doped Co/CNTs Catalysts for CO Hydrogenation to Light Olefins

With various contents, Mn was introduced into carbon nanotubes (CNTs) supported cobalt catalysts and the obtained Mn‐Co/CNTs catalysts were investigated for CO hydrogenation to light alkenes and characterized by N₂ adsorption, X‐ray diffraction (XRD), X‐ray photoelectron spectra (XPS), H₂ temperature programmed reduction (TPR), CO temperature programmed desorption (TPD) and transmission electron microscope (TEM). The results indicate that the addition of a small amount of Mn (0.3 wt%) to CNTs‐supported Co catalyst significantly increased the selectivity of C₂–C₄ olefins and decreased the selectivity of CH₄. However, with further addition of Mn to the cobalt catalysts, the CH₄ selectivity decreased obviously along with the increase of the C₅₊ selectivity. Compared with the unpromoted catalysts, the Mn‐promoted cobalt catalysts increased the C₂^?–C₄^?/C₂⁰–C₄⁰ molar ratio.     

Ion cyclotron resonance studies of some reactions of C+ ions

Product distributions and rate constants for the reaction of ground state C⁺ ions with O₂, NO, HCl, CO₂, H₂S, H₂O, HCN, NH₃, CH₄, H₂CO, CH₃OH, and CH₃NH₂ have been measured. Rate constants were obtained using ion cyclotron resonance trapped ion methods at JPL, and product distributions were obtained using a tandem (Dempster-ICR) mass spectrometer at the University of Utah. Rapid carbon isotope exchange has also been observed in C⁺-CO collisions.     

Solid phase modification of carbon nanotubes with anthraquinone and nitrobenzene functional groups

A new solid phase modification method is developed for chemical attachment of anthraquinone (AQ) and nitrobenzene (NB) functional groups to surface of carbon nanotubes (CNTs) through aminomethyl benzene (− C₆H₄CH₂NH −) linker. The benzyl amine linker was spontaneously grafted onto the CNTs by refluxing in the C₆H₄CH₂NHBoc diazonium salt at 60 °C in acetonitrile solution. After the removal of the Boc protecting group, AQ and NB groups were attached to the benzyl amine linker by solid-phase amide coupling. The grafted CNTs were characterized using FTIR and cyclic voltammetry techniques, surface coverage and stability of the tethered functional groups was evaluated. The dispersion of modified CNTs is significantly improved in organic solvent and the surface loading reaches up to 0.20 mmol/g for both anthraquinone and nitrobenzene.     

Synthesis of well-aligned carbon nanotubes on the NH3 pretreatment Ni catalyst films

Well aligned multi-walled carbon nanotubes (CNTs) have been synthesized on large area Nideposited SiO₂/Si substrates via the pyrolysis of C₂H₂ using thermal chemical vapor deposition technique at 900°C. We concluded that NH₃ pretreatment was very crucial to control the surface morphology of catalytic metals and thus to achieve the vertical alignment of CNTs. With higher density of the Ni particles, better alignment of the CNTs can be obtained due to steric hindrance effect between neighboring CNTs. The degree of crystallization of the CNTs enhanced with the increase of the NH₃ pretreatment time was investigated by X-ray diffraction and transmission electron microscope studies. Energy dispersive X-ray spectrum analysis revealed that CNTs grew by a tip growth mechanism.     

Macro-, Micro-, Nano- and Crystal Structures of a Homodinuclear Complex [NH3（ CH2）3NH3]2{Na2[（C6H4O2）2]（C6H4O2H）2}

A homodinuclear complex （NH3CH2CH2CH2NH3）2 {Na2[（C6H4O2）2] （C6H4O2H）2} （1） has been synthesized by a solution-based self-assembly route. It crystallized in monoclinic system with space group P21/c. Every sodium ion coordinates in a tetragonal prism fashion with two O atoms of a terminal chelating catecholate ligand and three O atoms from two bridging catecholate ligands. Two neighboring NaO5 tetragonal prisms are edge-shared and centrosymmetric with regard to the inversion center to form a binuclear cluster {Na2[（C6H4O2）2]（C6H4OOH）2}^4- anion. The complex anions were aligned parallelly by n-n interaction and linked with the protonated 1,3-propylenediamine through hydrogen bonds which were assembled into a multi-lamellar structure with channels. The crystal exhibits rectangular geometry with an interior triangle hollow structure under optical microscopy. And the scanning electron microscopy （SEM） indicates that the wall of the tubes shows multi-lamella morphologies. Further, the transmission electron microscopy （TEM） reveals that the crystal is composed of multi-lamellar nano-tubes with diameters less than 100 nm. The molecular structure of the complex was compared with that of its isomer complex 2.     

Highly Efficient AuPd/Carbon Nanotube Nanocatalysts for the Electro‐Fenton Process

Development of novel nanocatalysts for the highly efficient in situ synthesis of H₂O₂ from H₂ and O₂ in the electro‐Fenton (EF) process has potential for the remediation of water pollution. In this work, AuPd/carbon nanotube (CNT) nanocatalysts were successfully synthesized by the facile aggregation of AuPd bimetals on CNTs. Characterization by X‐ray diffraction, transmission electron microscopy, and X‐ray photoelectron spectroscopy indicated that pure AuPd bimetallic heterogeneous nanospheres (≈20 nm) were well dispersed outside the CNTs, which resulted in better catalytic performance than Pd/CNTs alone: 0.36 M H₂O₂ was synthesized; 0.05 M Fe²⁺ optimally initiated the EF process due to the superior in situ Fe²⁺ regeneration; and the organic pollutant removal reached 100 % at 37 min, with a pseudo‐first‐order kinetic constant k₁=0.051 min^?1. Moreover, structural insights before/after catalysis revealed that Au strengthened the construction of the nanocrystals, avoided negative deactivation caused by AuPd agglomeration, and immobilized the active Pd(111). The catalytic stability of AuPd/CNTs over ten cycles implied long durability and promising applications of this material.     

Improvement of field emission properties from screen‐printed CNTs cathodes by heat treatment in a C2H2/H2 gas mixture

We developed a posttreatment method for the screen‐printed carbon nanotubes (CNTs) cathode to improve its field emission characteristics. The treatment was carried out at 500 °C and 20 kPa for 20 min in the atmosphere of C₂H₂/H₂ (volume ratio 1:2). After the treatment, the field emission characteristics were greatly improved. The turn‐on field lowered from 5.0 to 1.6 V/µm, and the emission current density increased from 2 × 10^?4 to 1.0 mA/cm² at the electric field of 2.6 V/µm. In the mean time, the emission site density and uniformity were significantly increased. Scanning electron microscope images revealed that a new top layer of CNTs film has re‐grown on the surface of the printed CNTs cathode during the treatment. This new re‐grown CNTs layer contributes to the drastic enhancement of field emission from the printed cathode. This heat‐treatment technique is very promising for practical application of CNTs in field emission display. Copyright © 2006 John Wiley & Sons, Ltd.     

Past,present and future of the clathrate inclusion compounds built of cyanometallate hosts

One-, two- and three-dimensional CN-bridged metal complex structures made up of building blocks such as linear [Ag(CN)₂]^–, square planar [Ni(CN)₄]^2– or tetrahedral [Cd(CN)₄]^2–, and of the complementary ligands such as ammonia, water, unidentate amine, bidentate a,w- diaminoalkane, etc., are reviewed with an emphasis on their behaviour as hosts to afford clathrate inclusion compounds with guest molecules and as self-assemblies to form supramolecular structures with or without guests. The historical background is explained for Prussian blue and Hofmann's benzene clathrate based on their single crystal structure determinations. The strategies the author and coworkers have been applying to develop varieties of clathrate inclusion compounds from the Hofmann-type are demonstrated with the features observed for the developed structures determined by single crystal X-ray diffraction methods.Abbreviations for Ligands and Guests mma NMeH₂ - dma NMe₂H - tma NMe₃ - mea NH₂(CH₂)₂OH - en NH₂(CH₂)₂NH₂ - pn NH₂CHMeCH₂NH₂ - tn NH₂(CH₂)₃NH₂ - dabtn NH₂(CH₂)₄NH₂ - daptn NH₂(CH₂)₅NH₂ - dahxn NH₂(CH₂)₆NH₂ - dahpn NH₂(CH₂)₇NH₂ - daotn NH₂(CH₂)₈NH₂ - danon NH₂(CH₂)₉NH₂ - dadcn NH₂(CH₂)₁₀NH₂ - mtn NMeH(CH₂)₃NH₂ - dmtn NMe₂(CH₂)₃NH₂ - detn NEt₂(CH₂)₃NH₂ - temtn NMe₂(CH₂)₃NMe₂ - dien NH₂(CH₂)₂NH(CH₂)₂NH₂ - pXdam p-C₆H₄(NH₂CH₂)₂ - rnXdam m-C₆H₄(NH₂CH₂)₂ - py C₅H₅N pyridine - ampy NH₂C₅H₄N aminopyridine - Clpy CIC₅H₄N chloropyridine - Mepy MeC₅H₄N methylpyridine - dmpy Me₂C₅H₃N dimethylpyridine - bpy NC₅H₄C₅H₄N bipyridine - quin C₇H₉N quinoline - iquin iso-C₇H₉N isoquinoline - qxln C₈H₆N₂ quinoxaline - Pe C₅H₁₁-pentyl imH: C₃N₂H₄ imidazole - pyrz N(CHCH)₂N pyrazine - Mequin MeC₇H₈N methylquinoline - bppn C₁₃H₁₄N₂ 1,3-bis(4-pyridyl)propane - bpb C₁₄H₈N₂ 1,4-bis(4-pyridyl)butadiyne - N-Meim C₃N₂H₃Me N-methylimidazole - 2-MeimH C₃N₂H₃Me 2-methylimidazole - dmf HOCNMe₂ dimethylformamide - hmta C₆H₁₂N₄ hexamethylenetetramine - o-phen C₁₂H₈N₂ 1,10-phenanthroline - den HN(CH₂CH₂)₂NH piperazine - morph HN(CH₂CH₂)₂O morpholine - ten N(CH₂CH₂)₃N 1,4-diazabicyclo[2.2.2]octane - ameden NH₂(CH₂)₂N(CH₂CH₂)₂NH N-(2-aminoethyl)piperazine Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.     

Electrophilic aromatic substitution under chemical ionization conditions. Methylamine and ammonia as reagent gases

For compounds C₆H₅X (X?Cl, Br, I) under chemical ionization conditions, methylamine causes ipso substitution of X by [NH₂CH₃]⁺ and by [NH₂]⁺˙. C₆H₅F is less reactive; it gives some [C₆H₅NH₂]⁺˙. Nitrobenzene gives an adduct ion [M+CH₃NH₃]⁺, a reduction product ion [C₆H₅NO₂]⁺˙, and an ion at m/z93, probably a substitution product [C₆H₅NH₂]⁺˙, but no [C₆H₅NH₂CH₃]⁺. It is also shown that the ion m/z94, formed from nitrobenzene with ammonia as reagent gas, is a substitution product rather than a reduction product ion. Carbonyl compounds C₆H₅. CO. X give adduct ions and some substitution, mainly [C₆H₅NH₂]⁺˙.     

Reforming of CO<Subscript>2</Subscript>-Containing Natural Gas Using an AC Gliding Arc System: Effect of Gas Components in Natural Gas

The objective of the present work was to study the reforming of simulated natural gas via the nonthermal plasma process with the focus on the production of hydrogen and higher hydrocarbons. The reforming of simulated natural gas was conducted in an alternating current (AC) gliding arc reactor under ambient conditions. The feed composition of the simulated natural gas contained a CH₄:C₂H₆:C₃H₈:CO₂ molar ratio of 70:5:5:20. To investigate the effects of all gaseous hydrocarbons and CO₂ present in the natural gas, the plasma reactor was operated with different feed compositions: pure CH₄, CH₄/He, CH₄/C₂H₆/He, CH₄/C₂H₆/C₃H₈/He and CH₄/C₂H₆/C₃H₈/CO₂. The results showed that the addition of gas components to the feed strongly influenced the reaction performance and the plasma stability. In comparisons among all the studied feed systems, both hydrogen and C₂ hydrocarbon yields were found to depend on the feed gas composition in the following order: CH₄/C₂H₆/C₃H₈/CO₂ > CH₄/C₂H₆/C₃H₈/He > CH₄/C₂H₆/He > CH₄/He > CH₄. The maximum yields of hydrogen and C₂ products of approximately 35% and 42%, respectively, were achieved in the CH₄/C₂H₆/C₃H₈/CO₂ feed system. In terms of energy consumption for producing hydrogen, the feed system of the CH₄/C₂H₆/C₃H₈/CO₂ mixture required the lowest input energy, in the range of 3.58 × 10⁻¹⁸–4.14 × 10⁻¹⁸ W s (22.35–25.82 eV) per molecule of produced hydrogen.     

Identification of Fragment Ions by Their Kinetic Energy Gained During Dissociative Ionization by Electron Impact

A technique is described, which supports the plasma mass spectrometry to distinguish possible sources of ion peaks found in the mass spectrum of the neutral gas. The proposed method is based on the measurement of the kinetic energy which the fragment ions gain during dissociative ionization by electron impact inside the ion source of the spectrometer. This approach is of special interest for applications in plasma processes such as plasma assisted deposition or etching techniques where complicated molecules are involved. The principle of the method is demonstrated and discussed for the examination of various fragment ions as CH₃ ⁺, C₂H₂ ⁺, C₂H₃ ⁺, C₂H₅ ⁺ and CH₃O⁺ in the neutral gas spectrum of an 13.56 MHz rf discharge in an Argon-Tetraethoxysilane (TEOS) mixture.     

Deposition of Diamondlike Carbon Film and Mass Spectrometry Measurement in CH4/N2 RF Plasma

The deposition of diamondlike carbon (DLC) film and the measurements of ionic species by means of mass spectrometry were carried out in a CH₄/N₂ RF (13.56 MHz) plasma at 0.1 Torr. The film deposition rate greatly depended on both CH₄/N₂ composition ratio and RF power input. It was decreased monotonically as CH₄ content decreased in the plasma and then rapidly diminished to negligible amounts at a critical CH₄ content, which became large for higher RF power. The rate increased with increasing RF power, reaching a maximum value in 40% CH₄ plasma. The predominant ionic products in CH₄/N₂ plasma were NH⁺ ₄ and CH₄N⁺ ions, which were produced by reactions of hydrocarbon ions, such as CH⁺ ₃, CH⁺ ₂, CH⁺ ₅, and C₂H⁺ ₅ with NH₃ molecules in the plasma. It was speculated that the production of NH⁺ ₄ ion induced the decrease of C₂H⁺ ₅ ion density in the plasma, which caused a reduction in higher hydrocarbon ions densities and, accordingly, in film deposition rate. The N⁺ ₂ ion sputtering also plays a major role in a reduction of film deposition rate for relatively large RF powers. The incorporation of nitrogen atoms into the bonding network of the DLC film deposited was greatly suppressed at present gas pressure conditions.     

Stabilisation of reactive intermediates in molecular sieves

This paper presents studies on paramagnetic intermediates, free atoms and radicals produced in γ-irradiated molecular sieves and their reactions with adsorbate molecules or exchangeable cations. Four different systems have been investigated using EPR spectroscopy, Na-A/CH₄, AgNa-A/CH₃OH, Ag-SAPO-11/C₂H₄ and AgCs-rho/NH₃. It was found that methyl radicals are formed in two different sites in Na-A/CH₄ and in one of them they are stable at room temperature. The formation of Ag·CH₂OH⁺ radical cation with one-electron bond between silver and carbon has been established in AgNa-A/CH₃OH by EPR experiments with [¹³C]CH₃OH and DFT calculations. In Ag-SAPO-11/C₂H₄ the stabilisation of biligand silver/ethylene complex, Ag⁰(C₂H₄)₂ was postulated based on EPR and DFT results. Tetrameric silver clusters (Ag ₄ ³⁺ ) produced radiolytically in AgCs-rho/NH₃ strongly interact with two ammonia molecules as was deduced from the changes in superhyperfine structure of high-field EPR line of Ag ₄ ³⁺ pentet for zeolite exposed to [¹⁴N]NH₃ and [¹⁵N]NH₃. The presented examples clearly show that the combination of radiation methods with EPR technique is very useful to study the structure and reactivity of paramagnetic intermediates.     

Experimental characterization of gaseous species emitted by the fast pyrolysis of biomass and polyethylene

This study aims to experimentally characterize the carbonaceous and nitrogenous species, from the flash pyrolysis of millet stalks and polyethylene plastic bags, using the device of the tubular kiln, coupled to two gas analyzers: Analyzer Fourier Transform Infrared (FTIR) and an analyzer Infrared Non-Dispersive (IRND). Gaseous products analyzed are: CH₄, C₂H₂, C₂H₄, C₃H₈, C₆H₆, CO, CO₂, NO₂, NO, N₂O, HCN and NH₃. Whatever the temperature of thermal degradation, the pyrolysis shows us that in terms of mass:

• •For the millet stalks, the gaseous compounds are formed mainly CO and CO₂ to the carbonaceous species, HCN and NH₃, for the nitrogenous species analyzed;
• •As regards the polyethylene bags, hydrocarbons for carbonaceous species and HCN, NH₃ and NO₂ for the nitrogenous species, are most abundant.

In addition, the results suppose that in our experimental conditions, the hydrocarbon which is involved primarily in the formation of CO is ethylene C₂H₄. At the end of this characterization, we determined the rate of carbon and nitrogen found in the volatile gas. With millet stalks we have about 45% of volatile carbon and 15% of the nitrogen of fuel that are found in gaseous products. The results obtained with the plastic bags give 68% carbon and 15% nitrogen found in the nitrogenous species analyzed.     

多元醇法制备Cu2O/CNTs复合材料的研究

以Cu(CH₃COO)₂•H₂O和经硝酸处理的CNTs作为原料, 采用多元醇法成功合成了纳米氧化亚铜均布于碳纳米管表面的复合光催化剂. 用透射电镜(TEM), 高分辨透射电镜(HRTEM), X射线粉末衍射(XRD)对样品进行了表征, 测试结果表明大小为2～5 nm的氧化亚铜纳米颗粒均匀分散于碳纳米管的表面. 讨论了反应条件对Cu₂O在CNTs上负载效果的影响并就多元醇法合成Cu₂O/CNTs复合材料的反应机理作了初步探讨.     

Prussian Blue/Multiwalled Carbon Nanotube Hybrids: Synthesis,Assembly and Electrochemical Behavior

Prussian blue/carbon nanotube (PB/CNT) hybrids with excellent dispersibility in aqueous solutions were synthesized by adding CNTs to an acidic solution of Fe³⁺, [Fe(CN)₆]^3? and KCl. Fourier transform infrared spectroscopy, UV‐vis absorption spectroscopy and scanning electron microscopy were employed to confirm the formation of PB/CNT hybrids. The PB nanoparticles formed on the CNT surfaces exhibit a narrow size distribution and an average size of 40 nm. The present results demonstrate that the selective reduction of Fe³⁺ to Fe²⁺ by CNTs is the key step for PB/CNT hybrid formation. The subsequent fabrication of the PB/CNT hybrid films was achieved by layer‐by‐layer technique. The thus‐prepared PB/CNT hybrid films exhibit electrocatalytic activity towards H₂O₂ reduction.     

Mass spectrometry of transition metal π-complexes. XV—The effect of substituents on the fragmentation of benchrotrenyls under electron impact

Mass spectra of substituted benchrotrenyls RC₆H₅Cr(CO)₃ where R?H, F, CI, I, CH₃, OCH₃, COOCH₃, C₂H₅, N(CH₃)₂, NH₂, C₆H₅, C(CH₃)₃, p-C₆H₄NH₂, CH₂C₆H₅, CH₂CH₂C₆H₅), 1,3,5-(CH₃)₃C₆H₃Cr(CO)₃ and 1,2,3,5-(CH₃)₄C₆H₂Cr(CO)₃ have been studied. It has been found that for monosubstituted benchrotrenyls there is a linear dependence of the parameter log [Cr]⁺/[RC₆H₅Cr]⁺) on the number of degrees of freedom of the [RC₆H₅Cr]⁺ ion. Decarbonylation of the molecular ions is not affected by the nature of the substituent R. The results are interpreted in terms of the quasi-equilibrium theory of mass spectra.     

Competitive reactions of coordinated carbon monoxide and methyl isocyanide with amines

The relative reactivities of CO and CNR ligands with CH₃NH₂ were investigated in complexes which contained both ligands. Like (C₅H₅Fe(CO)₃⁺; the (C₅H₅)Fe(CO)₂(CNCH₃)⁺ complex reacts with CH₃NH₂ to give the carbamoyl complex (C₅)Fe(CO)(CNCH₃)(CONHCH₃); this is a readily reversible reaction. In contrast, (C₅H₅)Fe(CO)(CNCH₃)₂⁺ reacts with CH₃NH₂ to give the amidinium or carbene complex, (C₅H₅)Fe(CO)(CNCH₃)[C(NHCH₃)₂]⁺]. In a slow reaction, (C₅H₅)Fe(PPh₃)(CO)(CNCH₃)⁺ forms the amidinium complex, (C₅H₅)Fe(PPh₃)(CO)[C(NHCH₃)₂]⁺. Factors that affect the site of CH₃NH₂ reaction are discussed. The complexes have been characterized by IR and NMR spectroscopy; a variable temperature NMR study of (C₅H₅)Fe(CO)(CNCH₃)[C(NHCH₃)₂]⁺ indicates restricted rotation around the CN bonds of the amidinium ligand.