Spatial Simple Waves on a Shear Flow

The paper studies simple waves of the shallowwater equations describing threedimensional wave motions of a rotational liquid in a freeboundary layer. Simple wave equations are derived for the general case. The existence of unsteady or steady simple waves adjacent continuously to a given steady shear flow along a characteristic surface is proved. Exact solutions of the equations describing steady simple waves were found. These solutions can be treated as extension of Prandtl–Mayer waves for sheared flows. For shearless flows, a general solution of the system of equations describing unsteady spatial simple waves was found.     

Two-dimensional transonic vortex flows of an ideal gas

Equations are obtained for two-dimensional transonic adiabatic (nonisoenergetic and nonisoentropic) vortex flows of an ideal gas, using the natural coordinates (=const is the family of streamlines, and =const is the family of lines orthogonal to them). It is not required that the transonic gas flow be close to a uniform sonic flow (the derivation is given without estimates). Solutions are found for equations describing vortex flows inside a Laval nozzle and near the sonic boundary of a free stream.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 105–109, September–October, 1973.     

Effect of Streamwise Streaky Structures on Turbulization of a Circular Jet

Experimental investigations of the influence of streamwise streaky structures on turbulization of a circular laminar jet are described. The qualitative characteristics of jet evolution are studied by smoke visualization of the flow pattern in the jet and by filming the transverse and longitudinal sections of the jet illuminated by the laser sheet with image stroboscopy. It is shown that the streaky structures can be generated directly at the nozzle exit, and their interaction with the Kelvin–Helmholtz ring vortices leads to emergence of azimuthal beams ( structures) by a mechanism similar to threedimensional distortion of the twodimensional Tollmien–Schlichting wave at the nonlinear stage of the classical transition in nearwall flows. The effect of the jetexhaustion velocity and acoustic action on jet turbulization is considered.     

Heat transfer process in turbulent flows

A system of differential equations is proposed to describe turbulent flows of incompressible fluid boundary layer type with constant thermophysical characteristics A turbulent temperature conductivity is introduced which is expressed in terms of the energy and scale of turbulence, the dimensionless gradients of the mean velocity and turbulence energy, and the dimensionless distance, to the surface being streamlined. This system is integrated on an electronc computer by the mesh method for the flow in a flat-plate boundary layer with different Prandtl numbers (0.2P100) For air (P=0.71) the system is integrated for nonzero values of the transverse mean velocity component on the streamlined surface (0v_W/U0.0045).Moscow. Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 18–24, July–August, 1972.     

Hypersonic flow past blunt-edged delta wings

A method is proposed for calculating hypersonic ideal-gas flow past blunt-edged delta wings with aspect ratios = 100–200. Systematic wing flow calculations are carried out on the intervals 6 M 20, 0 20, 60 80; the results are analyzed in terms of hypersonic similarity parameters.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 175–179, September–October, 1990.     

Hopf bifurcation in a three-dimensional system

In this paper,Liapunor-Schmidl reduction and singularity theory are employed to discuss Hopf and degenerate Hopf bifureations in global parametric region in a three-dimensional system x=-βx+y, y=-x-βy(1-kz), z=β[α(1-z)-ky²], The conditions on existence and stability are given.     

A turbulent immersed air wall jet on a burning graphite surface

The turbulent boundary layer in an immersed air jet traveling along a burning graphite wall is analyzed. In order to study the heat and mass transfer and the friction in the boundary layer, a method of calculation based on the solution of the integrated energy and momentum relations is employed, allowing for the conservative properties of the turbulent boundary layer at the wall [1].Notation x longitudinal coordinate - y transverse coordinate - s height of slot - thickness of boundary layer - * displacement thickness - ** momentum-loss thickness - velocity - j transverse mass flow (flux) - density - T temperature - i total enthalpy - temperature factor - ₁ enthalpy factor - k reduced concentration of the i-th component - tangential stress - b permeability parameter - C₁ form (shape) parameter - dynamic viscosity coefficient - c _f friction coefficient - relative friction coefficient Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 60–67, January–February, 1971.     

Determination of specific thrust in unchoked regimes and design of a separationless convergent nozzle contour

The variation of the specific thrust R_Y on the angle of inclination of the wall is analyzed within the framework of the ideal gas model using the results of specific impulse and flow rate calculations for conical convergent nozzles. It is shown that in unchoked regimes nozzles with different have almost the same values of R_Y for both subcritical and supercritical pressure ratios _c. On the interval _C < 6 typical of convergent nozzles conical convergent nozzles with =30–90° have almost the same value of the specific thrust, maximal relative to the R_Y of nozzles with < 30°. In the presence of viscosity forces local boundary layer separation may occur in the neighborhood of the entrance section of the convergent nozzle. A method of constructing a separationless convergent nozzle contour with enhanced thrust is developed on the basis of a boundary layer separation criterion. The separationless contour is determined for given values of the flow rate, specific heat ratio, Reynolds number, wall temperature and initial boundary layer displacement thickness.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 158–164, January–February, 1990.     

Measurement of the Coefficient of Transverse Dispersion in Flow Through Packed Beds for a Wide Range of Values of the Schmidt Number

Experimental values of the coefficient of transverse dispersion (D _T) were measured with the system 2-naphthol/water, over a range of temperatures between 293K and 373K, which corresponds to a range of values of viscosity () between 2.83×10^–4 Ns/m² and 1.01×10^–3 Ns/m² and of molecular diffusion coefficient (D _m) between 1.03×10^–9 m²/s and 5.49×10^–9 m²/s. Since the density () of water is close to 10³ kg/m³, the corresponding variation of the Schmidt number (Sc=/D _m) was in the range 1000 – 50. More than 200 experimental values of the transverse dispersion coefficient were obtained using beds of silica sand with average particle sizes (d) of 0.297 and 0.496mm, operated over a range of interstitial liquid velocities (u) between 0.1mm/s and 14mm/s and this gave a variation of the Reynolds number (Re=du/) between 0.01 and 3.5.Plots of the dimensionless coefficient of transverse dispersion (D _T/D _m) vs. the Peclet number (Pe_m=ud/D _m) based on molecular diffusion bring into evidence the influence of Sc on transverse dispersion. As the temperature is increased, the value of Sc decreases and the values of D _T/D _m gradually approach the line corresponding to gas behaviour (i.e. Sc 1), which is known to be well approximated by the equation D _T/D _m=1/+ud/12D _m, where is the tortuosity with regard to diffusion.     

Normal Momentum Transfer Study by a Dynamic Technique

A novel dynamic technique for normal momentum accommodation study in a gas–solid body system is developed. The method can also be used for pressure measurements and adsorption studies. The experimental setup is described. The data obtained are interpreted with allowance for geometric parameters. The normal momentum accommodation coefficients are estimated on the basis of measurement results in systems hydrogen (nitrogen) gas mixture–singlecrystal silicon.     

Asymptotic solution to the problem of hypersonic flow over bodies in the neighborhood of the separation point of a thin shock layer

A study is made of the problem of hypersonic flow of an inviscid perfect gas over a convex body with continuously varying curvature. The solution is sought in the framework of the asymptotic theory of a strongly compressed gas [1–4] in the limit M when the specific heat ratio tends to 1. Under these assumptions, the disturbed flow is situated in a thin shock layer between the body and the shock wave. At the point where the pressure found by the Newton-Buseman formula vanishes there is separation of the flow and formation of a free layer next to the shock wave [1–4]. The singularity of the asymptotic expansions with respect to the parameter ₁ = ( –1)/( + 1) associated with separation of the strongly compressed layer has been investigated previously by various methods [3–9]. Local solutions to the problem valid in the neighborhood of the singularity have been obtained for some simple bodies [3–7]. Other solutions [7, 9] eliminate the singularity but do not give the transition solution entirely. In the present paper, an asymptotic solution describing the transition from the attached to the free layer is constructed for a fairly large class of flows.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 99–105, January–February, 1982.     

Two-Phase Models of Formation of Cavitating Spalls in a Liquid

The dynamics of the structure of a liquid layer structure (with microbubbles of a free gas) behind a rarefaction wave front is studied numerically using the two-phase Iordansky–Kogarko–van Wijngaarden model and the frozen mass-velocity field model. An analysis of the initial stage of cavitation by the Iordansky–Kogarko–van Wijngaarden model showed that tensile stresses behind the rarefaction wave front relax quickly and the mass-velocity field in the cavitation zone turns out to be frozen. This effect is used to describe the late stage of the development of the cavitation zone. These models were combined to study the formation of cavitating spalls in a free-surface liquid under shock-wave loading.     

Flow over a body with development of a steady separation zone as re → ∞

This paper discusses formulation of the total problem of flow of an incompressible liquid over a body, with formation of a closed stationary separation zone as Re . The scheme used is based on the method of matched asymptotic expansions [1]. Following [1], it is postulated that the separated zone is developed (i.e., it is not infinitely fragmented and does not vanish as Re ), and the flow inside it has a definite degree of regularity with respect to Re. With these hypotheses we can use the Prandtl-Batchelor theorem [2], which states that, in the limit as Re , a region of circulating flow becomes vortex flow of an inviscid liquid with constant vorticity . Therefore, a basis for constructing matched asymptotic expansions is the vortex-potential problem (the problem of determining a stream function , satisfying the equation = 0 in the region of translational motion and the equation = in a certain region, unknowna priori, of circulating motion). In the general case the solution of the vortex-potential problem depends on two parameters: the total pressure p_o and the vorticity in the separated zone. These parameters appear in the condition for matching the solutions of the first and second boundary-layer approximations (at the boundary of the separated zone for the end Re values) with the corresponding solutions for the inviscid flow. It is shown in the present paper that the conditions for matching the cyclic boundary layer with the external translational flow are the same additional relations which allow us to close the total problem. Thus, in using the method of matched asymptotic expansions to solve the problem of flow over a body with closed stationary separation zones one must simultaneously consider no less than two approximations.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 28–37, March–April, 1978.The authors thank G. Yu. Stepanov for discussion of the paper and valuable comments.     

Effect of a longitudinal magnetic field on the characteristics of a stabilized channel arc

The results of calculations of the temperature profiles and volt-ampere characteristics of a long cylindrical argon arc in a longitudinal uniform magnetic field are presented. The calculation was made for the following parameters: pressure p =0.1–10.0 atm; temperatures T = 1000-20,000°K; magnetic field induction B =0-10 T; diameter of cylindrical channel d = 1.0 cm. It is shown that for strongly radiating arcs (p1.0 atm) the temperature profiles become more inflated with an increase in the magnetic field, while for weakly radiating arcs (p 0.1 atm) the appearance of loops in the volt-ampere characteristics is typical for certain conditions (14,000T20,000°K, B1.0 T), indicating the impossibility of arcing under these conditions.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 2, pp. 147–153, March–April, 1975.     

Turbulent boundary layer on a permeable surface

Several theoretical [1–4] and experimental [5–7] studies have been devoted to the study of the effect of distributed injection of a gaseous substance on the characteristics of the turbulent boundary layer. The primary study has been made of flow past a flat plate with gas injection. The theoretical methods are based primarily on the semiempirical theories of Prandtl [1] and Karman [2].In contrast with the previous studies, the present paper proposes a power law for the mixing length; this makes it possible to obtain velocity profiles which degenerate to the known power profiles [8] in the case of flow without blowing and heat transfer. This approach yields analytic results for flows with moderate pressure gradient.Notation x, y coordinates - U, V velocity components - density - T temperature - h enthalpy - H total enthalpy - c mass concentration - , , D coefficients of molecular viscosity, thermal conductivity, diffusion - c_p specific heat - adiabatic exponent - r distance from axis of symmetry to surface - boundary layer thickness - U velocity in stream core - friction - c_f friction coefficient - P Prandtl number - S Schmidt number - S_t Stanton number - M Mach number - j=0 plane case - j=1 axisymmetric case The indices 1 injected gas - 2 mainstream gas - w quantities at the wall - core of boundary layer - 0 flow of incompressible gas without injection - v=0 flow of compressible gas without injection - ^* quantities at the edge of the laminar sublayer - quantities at the initial section - turbulent transport coefficients     

Some problems concerning nonstationary currents in dense plasma systems confined by walls

Nonstationary currents are examined in a dense magnetized plasma with 1, in which energy release and heat loss by thermal conduction and radiation are possible. Solutions are found in two limiting cases: ¦f¦ ¦ div (T)¦ and ¦f¦ ¦ div(T)¦ (f is the radiation intensity, is the coefficient of heat conduction, and T is the temperature). In the first case a solution was obtained of some problems of the cooling and heating of a plasma illustrated in part by the evolution in time of the temperature profile in the boundary layer. In the second case an isomorphic solution was found for an arbitrary dependence of the coefficient of heat conduction on the temperature, pressure, and magnetic field.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 3–8, January–February, 1972.The author is grateful to G. I. Budker for formulating the problem.     

Analysis of turbulent boundary layer interaction with an external supersonic flow behind a step

An integral method of analyzing turbulent flow behind plane and axisymmetric steps is proposed, which will permit calculation of the pressure distribution, the displacement thickness, the momentum-loss thickness, and the friction in the zone of boundary layer interaction with an external ideal flow. The characteristics of an incompressible turbulent equilibrium boundary layer are used to analyze the flow behind the step, and the parameters of the compressible boundary layer flow are connected with the parameters of the incompressible boundary layer flow by using the Cowles-Crocco transformation.A large number of theoretical and experimental papers devoted to this topic can be mentioned. Let us consider just two [1, 2], which are similar to the method proposed herein, wherein the parameter distribution of the flow of a plane nearby turbulent wake is analyzed. The flow behind the body in these papers is separated into a zone of isobaric flow and a zone of boundary layer interaction with an external ideal flow. The jet boundary layer in the interaction zone is analyzed by the method of integral relations.The flow behind plane and axisymmetric steps is analyzed on the basis of a scheme of boundary layer interaction with an external ideal supersonic stream. The results of the analysis by the method proposed are compared with known experimental data.Notation x, y longitudinal and transverse coordinates - X, Y transformed longitudinal and transverse coordinates - , ^*, ^** boundary layer thickness, displacement thickness, momentum-loss thickness of a boundary layer - , ^*, ^** layer thickness, displacement thickness, momentum-loss thickness of an incompressible boundary layer - u, velocity and density of a compressible boundary layer - U, velocity and density of the incompressible boundary layer - , stream function of the compressible and incompressible boundary layers - , dynamic coefficient of viscosity of the compressible and incompressible boundary layers - r₁ radius of the base part of an axisymmetric body - r radius - R transformed radius - M Mach number - friction stress - p pressure - a speed of sound - s enthalpy - v Prandtl-Mayer angle - P Prandtl number - P_t turbulent Prandtl number - r₂ radius of the base sting - b step depth - =0 for plane flow - =1 for axisymmetric flow Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 33–40, May–June, 1971.In conclusion, the authors are grateful to M. Ya. Yudelovich and E. N. Bondarev for useful comments and discussions.     

Temperament Development Modeled as a Nonlinear Complex Adaptive System

Using approach-withdrawal (AW) as a specific instance of temperament, a theoretical model of temperament as a complex dynamic system is proposed. Developmental contextualism (Lerner, 1998) serves as a guiding theory in determining the structural components of the system and Kauffman's (1993) Boolean models of self-organization are adapted to estimate the parameter functions. In this model P(AW) = f(, ) where P(AW) is the probability density function of an approach or a withdrawal response, ( is a standardized parameter estimate of the biological sensitivity to stimulation, and is a standardized parameter estimate of the contextual response to an approach or withdrawal response. It is theorized that the functions of ( and follow a Hill function of the forms: d /dt = (²/c² + ²) – K₁ d /dt = ( ²/c² + ²) – K₂, where K₁, K₂, and c are system constants. This results in a double sigmoid function in which at extreme values of and the system stabilizes on a steady state of either approach or withdrawal response patterns. At intermediate parameter values the probability density functions of approach and withdrawal responses are wider. Thus, AW can be modeled as representing two basins of attraction. In addition, considerations are given to the systems sensitivity to initial conditions.     

Approximate relationships for the determination of the pressure on the surface of a sphere or cylinder with an arbitrary mach number in the free stream

Numerical calculations have been made [1–4] of the pressure distribution over the surface of a sphere or cylinder during transverse flow in the range 0 /2, where is the angle reckoned from the stagnation point along the meridional plane, and on the basis of these results simple analytical equations have been proposed in order to determine the pressure for arbitrary Mach numbers M in the free stream. The gas is assumed to be ideal and perfect.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 185–188, March–April, 1985.     

Numerical solution of the problem of boundary-layer formation on a plate behind a moving shock wave

The formation of a boundary layer on a semiinfinite plate behind a moving shock wave is described by singular parabolic-type equations with elliptical boundary conditions. A supplementary condition at a fixed section [1–3] is set for the Prandtl equation in Crocco form describing traditional conditions on the wall, on the external boundary, and in the initial section. The integral ratio method [4, 5] is employed for each of the regions where the coefficient of the first derivative does not change sign. The differential equation system obtained has two singular points, in the vicinity of which nondegenerate transformation produces a system with a diagonal matrix which is then integrated. The original system is solved numerically, the values of asymptotic solutions being chosen as initial conditions. The calculations are presented as approximate functions obtained on the basis of systematic calculations and expansion of the Prandtl equation solution in the shock-wave intensity parameter = U/U.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 32–42, January–February, 1976.