Microquantitative determination of hesperidin by pulse perturbation of the oscillatory reaction system

A simple and reliable kinetic method for the determination of hesperidin (Hesp) is developed. It is based on potentiometric monitoring of the concentration perturbations of the matrix reaction system which is in a stable non-equilibrium stationary state close to the bifurcation point. The Bray–Liebhafsky oscillatory reaction is used as the matrix system. The response of the matrix to perturbations by different concentrations of Hesp is followed by using a Pt electrode. A linear relationship between maximal potential shift and the logarithm of Hesp concentrations is obtained between 7.5 and 599.4 g mL^–1. The limit of detection is 0.65 g mL^–1. The described procedure has been successfully applied to the determination of Hesp from different sources (capsules, industrial and hand-squeezed orange juice, and white wine).     

Brønsted Acid Catalyzed Morita–Baylis–Hillman Reaction: A New Mechanistic View for Thioureas Revealed by ESI‐MS(/MS) Monitoring and DFT Calculations

A Morita–Baylis–Hillman (MBH) reaction catalyzed by thiourea was monitored by ESI‐MS(/MS) and key intermediates were intercepted and characterized. These intermediates suggest that thiourea acts as an organocatalyst in all steps of the MBH reaction cycle, including the rate‐limiting proton‐transfer step. DFT calculations, performed for a model MBH reaction between formaldehyde and acrolein with trimethylamine as base and in the presence or the absence of thiourea, suggest that thiourea accelerates MBH reactions by decreasing the transition‐state (TS) energies through bidentate hydrogen bonding throughout the whole catalytic cycle. In the rate‐limiting proton‐transfer step, the thiourea acts not as a proton shuttle, but as a Brønsted acid stabilizing the basic oxygen center that is formed in the TS.     

The Roles of Counterion and Water in a Stereoselective Cysteine‐Catalyzed Rauhut–Currier Reaction: A Challenge for Computational Chemistry

The stereoselective Rauhut–Currier (RC) reaction catalyzed by a cysteine derivative has been explored computationally with density functional theory (M06‐2X). Both methanethiol and a chiral cysteine derivative were studied as nucleophiles. The complete reaction pathway involves rate‐determining elimination of the thiol catalyst from the Michael addition product. The stereoselective Rauhut–Currier reaction, catalyzed by a cysteine derivative as a nucleophile, has also been studied in detail. This reaction was experimentally found to be extremely sensitive to the reaction conditions, such as the number of water equivalents and the effect of potassium counterion. The E1cB process for catalyst elimination has been explored computationally for the eight possible stereoisomers. The effect of explicit water solvation and the presence of counterion (either K⁺ or Na⁺) has been studied for the lowest energy enantiomer pair (1S, 2R, 3S)/(1R, 2S, 3R).     

Cr(CO)3‐Activated Diels–Alder Reaction on Single‐Wall Carbon Nanotubes: A DFT Investigation

Breaking barriers : In agreement with experimental evidence, it was found by means of high‐level DFT calculations that the Cr(CO)₃ metal fragment considerably reduces the reaction energy barrier—for both the concerted and stepwise reaction mechanisms (see graphic)—of the Diels–Alder reaction of butadiene on (5,5) carbon nanotubes.

     

A New Strategy for Realizing the Conversion of “Homo–Hetero–Homo” Heteroepitaxial Growth in Bi2Te3 and the Thermoelectric Performance

Uncovering the reason for structure‐dependent thermoelectric performance still remains a big challenge. A low‐temperature and easily scalable strategy for synthesizing Bi₂Te₃ nanostring hierarchical structures through solution‐phase reactions, during which there is the conversion of “homo–hetero–homo” in Bi₂Te₃ heteroepitaxial growth, is reported. Bi₂Te₃ nanostrings are obtained through the transformation from pure Bi₂Te₃ hexagonal nanosheets followed by Te?Bi₂Te₃ “nanotop” heterostructures to Bi₂Te₃ nanostrings. The growth of Bi₂Te₃ nanostrings appears to be a self‐assembly process through a wavy competition process generated from Te and Bi³⁺. The conversion of homo–hetero–homo opens up new platforms to investigate the wet chemistry of Bi₂Te₃ nanomaterials. Furthermore, to study the effect of morphologies and hetero/homo structures, especially with the same origin and uniform conditions on their thermoelectric properties, the thermoelectric properties of Bi₂Te₃ nanostrings and Te?Bi₂Te₃ heterostructured pellets fabricated by spark plasma sintering have been investigated separately.     

Temperature Dual Enantioselective Control in a Rhodium‐Catalyzed Michael‐Type Friedel–Crafts Reaction: A Mechanistic Explanation

By changing the temperature from 283 to 233 K, the S (99 % ee) or R (96 % ee) enantiomer of the Friedel–Crafts (FC) adduct of the reaction between N‐methyl‐2‐methylindole and trans‐β‐nitrostyrene can be obtained by using (S_Rh,R_C)‐[(η⁵‐C₅Me₅)Rh{(R)‐Prophos}(H₂O)][SbF₆]₂ as the catalyst precursor. This catalytic system presents two other uncommon features: 1) The ee changes with reaction time showing trends that depend on the reaction temperature and 2) an increase in the catalyst loading results in a decrease in the ee of the S enantiomer. Detection and characterization of the intermediate metal–nitroalkene and metal–aci‐nitro complexes, the free aci‐nitro compound, and the FC adduct‐complex, together with solution NMR measurements, theoretical calculations, and kinetic studies have allowed us to propose two plausible alternative catalytic cycles. On the basis of these cycles, all the above‐mentioned observations can be rationalized. In particular, the reversibility of one of the cycles together with the kinetic resolution of the intermediate aci‐nitro complexes account for the high ee values achieved in both antipodes. On the other hand, the results of kinetic measurements explain the unusual effect of the increment in catalyst loading.     

The Aza‐Morita–Baylis–Hillman Reaction: A Mechanistic and Kinetic Study

The aza‐Morita‐Baylis–Hillman (aza‐MBH) reaction has been studied in a variety of solvents, a selection of imine substrates and with various combinations of PPh₃ and para‐nitrophenol as the catalyst system. The measured kinetic data indicates that the effects of solvent and protic co‐catalyst are strongly interdependent. These results are most easily reconciled with a mechanistic model involving the reversible protonation of zwitterionic intermediates in the catalytic cycle, which is also supported by ³¹P NMR spectroscopy and quantum chemical studies.     

The Diels–Alder Reaction in Total Synthesis

The Diels–Alder reaction has both enabled and shaped the art and science of total synthesis over the last few decades to an extent which, arguably, has yet to be eclipsed by any other transformation in the current synthetic repertoire. With myriad applications of this magnificent pericyclic reaction, often as a crucial element in elegant and programmed cascade sequences facilitating complex molecule construction, the Diels–Alder cycloaddition has afforded numerous and unparalleled solutions to a diverse range of synthetic puzzles provided by nature in the form of natural products. In celebration of the 100th anniversary of Alder's birth, selected examples of the awesome power of the reaction he helped to discover are discussed in this review in the context of total synthesis to illustrate its overall versatility and underscore its vast potential which has yet to be fully realized.     

Fourfold Diels–Alder Reaction of Tetraethynylsilane

A series of ethynylated silanes, including tetraethynylsilane, was treated with tetraphenylcyclopentadienone at 300 °C under microwave irradiation to give the aromatized Diels–Alder adducts as sterically encumbered mini‐dendrimers with up to 20 benzene rings. The sterically most congested adducts display red‐shifted emission through intramolecular π–π interactions in the excited state.     

Molecule‐Induced Radical Formation (MIRF) Reactions—A Reappraisal

Radical chain reactions are commonly initiated through the thermal or photochemical activation of purpose‐built initiators, through photochemical activation of substrates, or through well‐designed redox processes. Where radicals come from in the absence of these initiation strategies is much less obvious and are often assumed to derive from unknown impurities. In this situation, molecule‐induced radical formation (MIRF) reactions should be considered as well‐defined alternative initiation modes. In the most general definition of MIRF reactions, two closed‐shell molecules react to give a radical pair or biradical. The exact nature of this transformation depends on the σ‐ or π‐bonds involved in the MIRF process, and this Minireview specifically focuses on reactions that transform two σ‐bonds into two radicals and a closed‐shell product molecule.     

Phosphine–Alkene Ligands as Mechanistic Probes in the Pauson–Khand Reaction

An alkyne tetracarbonyl dicobalt complex with a chelated phosphine–alkene ligand, in which the phosphorus atom and the alkene from the ligand are attached to the same cobalt atom has been prepared, isolated, and characterized by X‐ray crystallography. The complex serves as a mechanistic model for an intermediate of the Pauson–Khand (PK) reaction. Although the alkene fragment is located in an equatorial coordination site with an appropriate orientation, and, therefore, should undergo insertion, it failed to give the PK product upon either thermal or N‐methylmorpholine N‐oxide activation. However, a phosphine–alkene complex that contains a terminal alkene readily provided the corresponding PK product. We attribute this change in reactivity to the different ability of each olefin to undergo 1,2‐insertion. These results provide further insights into the factors that govern a crucial step in the PK reaction, the olefin insertion.     

Diels-Alder reactions II: The Reaction Mechanism

The possible mechanisms of the preparatively so productive Diels-Alder reactions are discussed critically on the basis of experimental data. Although most of the facts can be explained readily by a synchronous mechanism, a number of problems remains.     

Enhancing the Reaction Rates of Morita–Baylis–Hillman Reaction in Heterocyclic Aldehydes by Substitutions

The molecular origin of the experimentally observed pronounced difference in the rates of Morita–Baylis–Hillman (MBH) reaction in heterocyclic aldehydes, depending on the position of the formyl group, is investigated herein by using DFT‐based mechanistic studies and free energy computations. These calculations are based on the 1,4‐diazobicyclo[2.2.2]octane (DABCO)‐catalyzed MBH reaction of methyl acrylate with substituted 4‐ and 5‐isoxazolecarbaldehyde, which are slow‐ and fast‐reacting substrates, respectively. As a result of this study, we propose that by tailoring ring substitutions the reactivity of the formyl group for MBH reactions may be enhanced in slow‐reacting heterocyclic aldehydes. This proposition is demonstrated by enhancing the rate of the MBH reaction in 4‐isoxazolecarbaldehyde more than 10⁴‐fold by installing an ester substitution at the C‐3 position. Similarly, the reactivity of the formyl group towards the MBH reaction in substituted 3‐pyrazolecarbaldehyde and pyridinecarbaldehyde is shown to be increased several‐fold by a halo substitution. We also confirm that the reasons for different reactivities of heterocyclic aldehydes and the proposed scheme for improving the reaction rates remains valid for all the three mechanisms proposed for the MBH reaction, namely, Hill–Isaacs, McQuade, and Aggarwal.     

Well‐Defined Models for the Elusive Dinuclear Intermediates of the Pauson–Khand Reaction

The mechanism of the Pauson–Khand reaction has attracted significant interest due to the unusual dinuclear nature of the Co₂(CO)_x active site. Experimental and computational data have indicated that the intermediates following the initial Co₂(CO)₆(alkyne) complex are thermodynamically unstable and do not build up in appreciable concentrations during the course of the reaction. As a consequence, the key steps that control the scope of viable substrates and various aspects of selectivity have remained largely uncharacterized. Herein, a direct experimental investigation of the dinuclear metallacycle‐forming step of the Pauson–Khand reaction is reported. These studies capitalize on well‐defined d⁹–d⁹ dinickel complexes supported by a naphthyridine–diimine (NDI) pincer ligand as functional surrogates of Co₂(CO)₈.     

Photophysical Properties of Intramolecular Charge Transfer in a Tribranched Donor–π–Acceptor Chromophore

The photophysical properties of intramolecular charge transfer (ICT) in a novel tribranched donor–π–acceptor chromophore, triphenoxazine‐2,4,6‐triphenyl‐1,3,5‐triazine (tri‐PXZ‐TRZ), with thermally activated delayed fluorescence character was investigated in different aprotic solvents by steady‐state spectroscopy and femtosecond and nanosecond transient absorption spectroscopy measurements. Increasing the solvent polarity led to a significant increase in the Stokes shift. The large Stokes shift in highly polar solvents was attributed to ICT properties upon excitation; this resulted in a strong interaction between the tri‐PXZ‐TRZ molecule and the surrounding solvent, which led to a strong solvation process. Quantum‐chemical calculations and changes in the dipole moment showed that this compound has a large degree of ICT. Furthermore, an apolar environment helped to preserve the symmetry of tri‐PXZ‐TRZ and to enhance its emission efficiency. The femtosecond and nanosecond transient absorption spectroscopy results indicated that the excited‐state dynamics of this push–pull molecule were strongly influenced by solvent polarity through the formation of a solvent‐stabilized ICT state. The excited‐state relaxation mechanism of tri‐PXZ‐TRZ was proposed by performing target model analysis on the femtosecond transient absorption spectra. In addition, the delayed fluorescence of tri‐PXZ‐TRZ was significantly modulated by a potential competition between solvation and intersystem crossing processes.     

Reaction Mechanism and Regioselectivity of the Bingel–Hirsch Addition of Dimethyl Bromomalonate to La@C2v‐C82

We quantum chemically explore the thermodynamics and kinetics of all 65 possible mechanistic pathways of the Bingel–Hirsch addition of dimethyl bromomalonate to the endohedral metallofullerene La@C_2v‐C₈₂ that result from the combination of 24 nonequivalent carbon atoms and 35 different bonds present in La@C_2v‐C₈₂ by using dispersion‐corrected DFT calculations. Experimentally, this reaction leads to four singly bonded derivatives and one fulleroid adduct. Of these five products, only the singly bonded derivative on C23 could be experimentally identified unambiguously. Our calculations show that La@C_2v‐C₈₂ is not particularly regioselective under Bingel–Hirsch conditions. From the obtained results, however, it is possible to make a tentative assignment of the products observed experimentally. We propose that the observed fulleroid adduct results from the attack at bond 19 and that the singly bonded derivatives correspond to the C2, C19, C21, and C23 initial attacks. However, other possibilities cannot be ruled out completely.     

Industrial Applications of the Diels–Alder Reaction

The Diels–Alder reaction is one of the most popular transformations for organic chemists to generate molecular complexity efficiently. Surprisingly, little is known about its industrial application for the synthesis of pharmacologically active ingredients, agrochemicals, and flavors and fragrances. This Review highlights selected examples, with a focus on large‐scale applications (>1 kg) from a process research and development perspective.     

Palladium‐Catalyzed Intramolecular Trost–Oppolzer‐Type Alder–Ene Reaction of Dienyl Acetates to Cyclopentadienes

A new approach to the synthesis of highly substituted cyclopentadienes, indenes, and cyclopentene‐fused heteroarenes by means of the Pd‐catalyzed Trost–Oppolzer‐type intramolecular Alder–ene reaction of 2,4‐pentadienyl acetates is described. This unprecedented transformation combines the electrophilic features of the Tsuji–Trost reaction with the nucleophilic features of the Alder–ene reaction. The overall outcome can be perceived as a hitherto unknown “acid‐free” iso‐Nazarov‐type cyclization. The versatility of this strategy was further demonstrated by the formal synthesis of paucifloral F, a resveratrol‐based natural product.