Highly stereoselective syntheses of syn- and anti-1,2-amino alcohols

The reduction of N-protected amino ketones can be carried stereoselectively to produce either the syn- or anti-amino alcohol diastereomer. Carbamate-protected amino ketones can be reduced predictably and selectively to anti-amino alcohols with LiAlH(O-t-Bu)3 in ethanol at -78 degrees C. N-Trityl-protected amino ketones can be reduced selectively to syn-amino alcohols with LiAlH(O-t-Bu)3 in THF at -5 degrees C.     

Osmium pyme complexes for fast hydrogenation and asymmetric transfer hydrogenation of ketones

The osmium compound trans,cis-[OsCl2(PPh3)2(Pyme)] (1) (Pyme=1-(pyridin-2-yl)methanamine), obtained from [OsCl2(PPh3)3] and Pyme, thermally isomerizes to cis,cis-[OsCl2(PPh3)(2)(Pyme)] (2) in mesitylene at 150 degrees C. Reaction of [OsCl2(PPh3)3] with Ph2P(CH2)(4)PPh2 (dppb) and Pyme in mesitylene (150 degrees C, 4 h) leads to a mixture of trans-[OsCl2(dppb)(Pyme)] (3) and cis-[OsCl2(dppb)(Pyme)] (4) in about an 1:3 molar ratio. The complex trans-[OsCl2(dppb)(Pyet)] (5) (Pyet=2-(pyridin-2-yl)ethanamine) is formed by reaction of [OsCl2(PPh3)3] with dppb and Pyet in toluene at reflux. Compounds 1, 2, 5 and the mixture of isomers 3/4 efficiently catalyze the transfer hydrogenation (TH) of different ketones in refluxing 2-propanol and in the presence of NaOiPr (2.0 mol %). Interestingly, 3/4 has been proven to reduce different ketones (even bulky) by means of TH with a remarkably high turnover frequency (TOF up to 5.7 x 10(5) h(-1)) and at very low loading (0.05-0.001 mol %). The system 3/4 also efficiently catalyzes the hydrogenation of many ketones (H2, 5.0 atm) in ethanol with KOtBu (2.0 mol %) at 70 degrees C (TOF up to 1.5 x 10(4) h(-1)). The in-situ-generated catalysts prepared by the reaction of [OsCl2(PPh3)3] with Josiphos diphosphanes and (+/-)-1-alkyl-substituted Pyme ligands, promote the enantioselective TH of different ketones with 91-96 % ee (ee=enantiomeric excess) and with a TOF of up to 1.9 x 10(4) h(-1) at 60 degrees C.     

Reactions of aliphatic ketones R2CO (R=Me, Et, iPr and tBu) with the MCI4/Li(Hg) system (M=U or Ti): mechanistic analogies between the McMurry, Wittig, and Clemmensen reactions

Analysis of the products of the reactions of ketones R2CO (R = Me, Et, iPr, tBu) with the MCl4/Li(Hg) system (M = U, Ti) at 20 degrees C revealed significant differences. For R = Me, the reaction proceeded exclusively (M = U) or preferentially (M = Ti) via a metallopinacol intermediate resulting from dimerization of ketyl radicals. Pinacol was liberated by hydrolysis, and tetramethylethylene was obtained after further reduction at 65 degrees C. For R=iPr, formation of iPr2C=CiPr2 as the only coupling product, the nonproduction of this alkene by reduction of the uranium pinacolate [U]-OCR2CR2O-[U] (R= iPr) at 20 degrees C, and the instability of the corresponding titanium pinacolate towards rupture of the pinacolic C-C bond indicated that reductive coupling of iPr2CO did not proceed by dimerization of ketyl radicals. Formation of 2,4-dimethyl-2-pentene was in favor of a carbenoid intermediate resulting from deoxygenative reduction of the ketyl. These results revealed that for sterically hindered ketones, McMurry reactions can be viewed as Wittig-like olefination reactions. For R=tBu, no coupling product was obtained and the alkane tBu2CH2 was the major product. The involvement of the carbenoid species [M]=CtBu2 was confirmed by its trapping with H2O, leading to tBu2CH2, and with the aldehydes RCHO, giving the cross-coupling products tBu2C=C(R)H (R = Me, tBu). Therefore, in the case of severely congested ketones, McMurry reactions present strong similarities to the Clemmensen reduction of ketones, owing to the involvement in both reactions of carbenoid species which exhibit similar reactivity.     

Unexpected cross-coupling reaction between o-chloroaryl ketones and organomanganese reagents

Alkyl- and arylmanganese reagents react with o-chloro or o-bromoaryl ketones to give the substituted ketones in high yields. The cross-coupling reaction is performed under mild conditions (-60 to +40 degrees C, 30 min to 4 h) and takes place with excellent chemoselectivity. [reaction: see text]     

Cobalt-catalyzed regioselective carbocyclization reaction of o-iodophenyl ketones and aldehydes with alkynes, acrylates, and acrylonitrile: a facile route to indenols and indenes

An efficient cobalt-catalyzed carbocylization for the synthesis of indenols and indenes and a new method for reductive decyanation are described. 2-Iodophenyl ketones and aldehydes 1a-g undergo carbocyclization with various disubstituted alkynes 2a-k in the presence of Co(dppe)I(2) and zinc powder in acetonitrile at 80 degrees C for 3 h to afford the corresponding indenol derivatives 3a-s and4a-m in good to excellent yields. For some unsymmetrical alkynes, the carbocyclization was remarkably regioselective, affording a single regioisomer. The cobalt-catalyzed carbocyclization reaction was successfully extended to the synthesis of indene derivatives. Thus, the reaction of 2-iodophenyl ketones and aldehydes (1) with acrylates H(2)C=CHCO(2)R (7a-d) and acrylonitrile H(2)C=CHCN (7e) proceeds smoothly in the presence of Co(dppe)Cl(2)/dppe and zinc powder in acetonitrile at 80 degrees C for 24 h to afford the corresponding indenes 8a-k and 9a-c in moderate to good yields. Interestingly, when 7e was employed for the carbocylization, reductive decyanation also occurred to give an indene derivative without the cyano functionality. A possible mechanism for this cobalt-catalyzed carbocyclization reaction is also proposed.     

Catalytic Leuckart-Wallach-type reductive amination of ketones

A CpRh(III) complex catalyzes reductive amination of ketones using HCOONH(4) at 50-70 degrees C to give the corresponding primary amines in high yields. The reaction is clean and operationally simple and proceeds at a lower temperature and with higher chemoselectivity than the original Leuckart-Wallach reaction. The new method has been applied to the synthesis of alpha-amino acids directly from alpha-keto acids.     

Metathesis reactions of pyrazolotriazinones generate dynamic combinatorial libraries

[reaction: see text] Reversible metathesis reactions of pyrazolotriazinones and aliphatic aldehydes or ketones proceed in aqueous, phosphate-buffered media at pH 4 and 40-60 degrees C to generate thermodynamically controlled mixtures of heterocycles.     

A general synthetic route to 6,6-substituted-6H-dibenzo[b,d]pyrans from dibenzofuran

The reaction of dibenzofuran 1, lithium pieces (2.2 equiv), and TMEDA (2.2 equiv) in dry ether under reflux led to a solution of the corresponding C,O-dilithiated intermediate 2 which, upon treatment with different ketones or aldehydes (0.8 equiv) at -78 degrees C, afforded, after hydrolysis and dehydration, 6,6-substituted-6H-dibenzo[b,d]pyrans 3 in good yields. The reaction undergoes reductive ring opening and cyclization, and the intermediate diol 4e was isolated.     

N-heterocyclic carbene-catalyzed silyl enol ether formation

N-Heterocyclic carbenes (NHCs) were found to catalyze the silyl transfer from trialkylsilyl ketene acetals to ketones. In the presence of a catalytic amount of NHC 3 (IAd, 0.1 to 5 mol %), a series of enolizable ketones as well as cyclohexanecarboxaldehyde were efficiently converted into the corresponding silyl enol ethers at 23 degrees C in THF.     

Nickel-catalyzed regioselective carbocyclization of ortho-halophenyl ketones with propiolates: an efficient route to disubstituted indenols

Carbocylization of o-halophenyl ketones with propiolates in the presence of Ni(dppe)Br2 and Zn powder in acetonitrile at 80 degrees C afforded the corresponding 2,3-disubstituted indenols.     

Facile beta-alkyl and beta-hydride elimination in the nickel-catalyzed annulation of o-iodophenyl ketones and aldehydes with bicyclic alkenes

[reaction: see text] o-Iodoaryl aldehydes react with bicyclic alkenes in the presence of NiBr(2)(dppe) and Zn powder in acetonitrile at 80 degrees C undergoing annulation to give polycyclic ketone derivatives. Surprisingly, o-iodoaryl alkyl ketones also react with bicyclic alkenes to form polycyclic ketones with structures the same as those from the corresponding o-iodoaryl aldehydes.     

Stabilization of ketone and aldehyde enols by formation of hydrogen bonds to phosphazene enolates and their aldol products

Solution properties of enolates generated using the phosphazene (Schwesinger) base P4-tBu were investigated by NMR spectroscopy. With a full equivalent of base the benzyl ketones 1a and 1b, the acetophenone 2, the arylacetaldehyde 1c, and the methyl arylacetate 1d formed the expected "naked" (P4H+) enolates 3 and 7. However, at a half-equivalent of base the ketones 1a and 1b as well as the aldehyde 1c formed solutions of stable hydrogen-bonded dimeric (enol-enolate) structures (4). The acetophenone 2, on the other hand, forms only traces of the H-bonded dimer 8 during deprotonation of 2. The thermodynamic product was the isomeric self-aldol condensation product 12. The mechanism of this condensation was elucidated by low temperature rapid-injection (RI) NMR spectroscopy. Solutions of 8 stable enough for NMR characterization could be transiently generated by semiprotonation of the enolate 7 with HCl.OEt2 at -130 degrees C using RINMR. The ester enolate 1d gave no trace of 4d even on a time scale as short as a few seconds at -130 degrees C either during the semideprotonation of 1d, or during semiprotonation of the enolate 3d. Long-lived solutions of the enols derived from 1a, 1b, 1c, and 2 (but not 1d) could be produced by full protonation of the phosphazene enolates with HCl.OEt2 at low temperature.     

Versatile synthesis of quinoline-3-carboxylic esters and indol-2-acetic esters by palladium-catalyzed carbonylation of 1-(2-aminoaryl)-2-yn-1-ols

1-(2-Aminoaryl)-2-yn-1-ols, easily obtained by the Grignard reaction between 1-(2-aminoaryl)ketones and alkynylmagnesium bromides, were subjected to carbonylative conditions in the presence of the PdI2-KI catalytic system, in the presence and in the absence of an external oxidant. Under oxidative conditions (80 atm of a 4:1 mixture of CO-air, in MeOH as the solvent at 100 degrees C and in the presence of 2 mol % of PdI2 and 20 mol % of KI), 1-(2-aminoaryl)-2-yn-1-ols bearing a primary amino group were selectively converted into quinoline-3-carboxylic esters in fair to good yields [45-70%, based on starting 1-(2-aminoaryl)ketones], ensuing from 6-endo-dig cyclization followed by dehydration and oxidative methoxycarbonylation. On the other hand, indol-2-acetic esters, deriving from 5-exo-dig cyclization followed by dehydrating methoxycarbonylation, were selectively obtained in moderate to good yields [42-88%, based on starting 1-(2-aminoaryl)ketones] under nonoxidative conditions (90 atm of CO, in MeOH as the solvent at 100 degrees C and in the presence of 2 mol % of PdI2 and 20 mol % of KI), in the case of 1-(2-aminoaryl)-2-yn-1-ols bearing either a primary or secondary amino group and substituted with a bulky group on the triple bond.     

Highly efficient Pd-catalyzed carbonylative cross-coupling reactions with tetraorganoindates

Tetraorganoindates, which were prepared easily from the reaction of 1 equiv of InCl(3) with 4 equiv of organometallics, could be employed as effective nucleophilic cross-coupling partners in Pd-catalyzed carbonylative cross-coupling reactions with a variety of organic electrophiles. The present method gave unsymmetrical ketones and 1,4-diacylbenzenes in good yields with highly efficient transfer of almost all the organic groups attached to the indium under a carbon monoxide atmosphere in THF at 60 degrees C.     

应用搅拌棒吸附萃取-热脱附-气相色谱-质谱分析烟用香料的化学成分

应用搅拌棒吸附萃取法(SBSE)提取烟用香料的化学成分,并利用热脱附(TD)和色谱-质谱联用(GC-MS)进行分析。对影响萃取效果的因素(萃取时间和氯化钠的加入量)进行了考察,并采用正交试验法对影响热脱附的3个主要因素(脱附温度、脱附时间和冷阱温度)进行了优化,得到了较优的实验条件。对方法的重现性进行了考察,同一样品6次测定所得30个组分的峰面积的相对标准偏差（RSD）平均值小于10%,说明所建立方法的重现性较好。在样品中鉴别出酯类、酮类和醛类等30种不同化学组分,这些物质反映了该香料的香气特点。实验证明SBSE和TD适用于烟用香料的快速分析测定。     

直接衍生离子液体富集高效液相色谱分析水基胶中脂肪族醛酮

建立了以2,4-二硝基苯肼(DNPH)直接衍生,1-丁基-3-甲基咪唑六氟磷酸盐(［BMIM］PF6)萃取富集,高效液相色谱(HPLC)分析水基胶中痕量脂肪族醛酮的方法。分散的水基胶乳液用80 mg/L DNPH衍生化试剂(含0.44 mol/L磷酸)于40 ℃衍生18 min。取离心后的上层衍生液,加入0.5 mL ［BMIM］PF6于30 ℃萃取富集,离子液体相过滤后进行HPLC分析。采用Dionex Acclaim Explosives E2色谱柱(250 mm×4.6 mm, 5 μm),以水-乙腈为流动相在流速1.2 mL/min进行梯度洗脱,色谱柱温度为35 ℃,检测波长为365 nm。结果表明,8种脂肪族醛酮的检出限为0.022～0.221 mg/kg,定量限为0.073～0.738 mg/kg,相对标准偏差为3.5%～7.3%,回收率为84.0%～102.5%。与溶剂萃取法相比,该法具有检出限和定量限低、稳定性高、测定更准确的优势。     

Designing the "search pathway" in the development of a new class of highly efficient stereoselective hydrosilylation catalysts

The direct coupling of oxazolines and N-heterocyclic carbenes leads to chelating C,N ancillary ligands for asymmetric catalysis that combine both an "anchor" unit and a stereodirecting element. Reacting various N-substituted imidazoles with 2-bromo-4(S)-tert-butyl- and 2-bromo-4(S)-isopropyloxazoline gave the imidazolium precursors of the stereodirecting ancillary ligands. A library of ten different ligand precursors was obtained by using this simple procedure (65-97 % yield). These protioligands were metalated in a subsequent step by reaction with [{Rh(mu-OtBu)(nbd)}2] (nbd=norbornadiene), generated in situ from KOtBu and [{RhCl(nbd)}2] giving the corresponding N-heterocyclic carbene complexes [RhBr(nbd)(oxazolinyl-carbene)] 4 a-j in good yields. X-ray diffraction studies of two of the rhodium complexes, 4 d and 4 j, established a distorted square-pyramidal coordination geometry with the bromo ligand occupying the apical position. The rhodium-carbene bond length was found to be 2.070(4) A (4 d) and 2.012(3) A (4 j). Complexes 4 a-j were treated with AgBF4 in dichloromethane, giving the active cationic square-planar catalysts for the hydrosilylation of ketones. As a reference reaction for the catalyst optimisation, the hydrosilylation of acetophenone with diphenylsilane was studied and the system optimised with respect to the counterion (BF(4) (-)), solvent (THF) and the silane reducing agent (diphenylsilane). The reaction product (1-phenylethanol) was obtained with the highest enantiomeric excess (ee) by carrying out the reaction at -60 degrees C, whilst the enantioselectivity drops upon going both to lower and higher temperatures. The observation that the temperature dependence of the ee values goes through a maximum indicated a change in the rate-determining step as the temperature is varied. The determination of the initial reaction rate in the hydrosilylation of acetophenone upon varying the catalyst (4 d) and substrate concentrations at -55 degrees C established a rate law for the initial conversion which is first-order in both substrates as well as the catalyst (Vi = k[4][PhCOMe][Ph2SiH2]). The catalytic system derived from complex 4 d was found to afford high yields and good enantioselectivities in the reduction of various aryl alkyl ketones (acetophenone: 92 % isolated yield and 90 % ee, 2-naphtyl methyl ketone: 99 % yield, 91 % ee). The selectivity for the reduction of prochiral dialkyl ketones is comparable or even superior to the best previously reported for prochiral nonaromatic ketones; whereas cyclopropyl methyl ketone is hydrosilylated with an enantioselectivity of 81 % ee, the increase of the steric demand of one of the alkyl groups leads to improved ee's, reaching 95 % ee in the case of tert-butyl methyl ketone. Linear chain n-alkyl methyl ketones, which are particularly challenging substrates, are reduced in good asymmetric induction, such as 2-octanone (79 % ee) and even 2-butanone (65 % ee).     

Titanium(IV) chloride and quaternary ammonium salt promoted Baylis-Hillman reaction.

The Baylis-Hillman reaction of aldehydes with alpha,beta-unsaturated ketones can be drastically affected by the reaction temperature and Lewis bases. When the reaction was carried out at -78 degrees C using catalytic amounts of quaternary ammonium salts (R4N+X-, X = Cl, Br, I) as Lewis bases, in the presence of titanium(IV) chloride, the chlorinated aldol adduct 1 was obtained as the major product. Quaternary ammonium bromides and iodides (R4N+X-, X = Br, I) have higher catalytic activity than corresponding chlorides (R4N+Cl-). Quaternary ammonium fluorides (R4N+F-) do not have activity at all. The amounts of Lewis acid and quaternary ammonium salts used affect the reaction rate and product. A plausible reaction mechanism is proposed. If the reaction was carried out at room temperature (about 20 degrees C) in the presence of titanium(IV) chloride and quaternary ammonium salts (R4N+X-, X = Cl, Br, I), the elimination product 3, derived from 1, was formed as the major product.     

Trifluoromethyl ketones from enolizable carboxylic acids via enediolate trifluoroacetylation/decarboxylation

Primary and secondary (enolizable) carboxylic acids were converted in a single step to trifluoromethyl ketones. Treatment of the acid with 2.2 equiv of LDA generated an enediolate that was trifluoroacetylated with EtO(2)CCF(3). Quenching the reaction mixture with aqueous HCl resulted in rapid decarboxylation and provided the trifluoromethyl ketone product in good yield. The process may be performed at -20 degrees C with a slight reduction in yield. The reaction was extended to the preparation of pentafluoroethyl and chlorodifluoromethyl ketones.     

Lewis acid-catalyzed [4 + 2] benzannulation between enynal units and enols or enol ethers: novel synthetic tools for polysubstituted aromatic compounds including indole and benzofuran derivatives

The reaction of enynals 1, including o-(alkynyl)benzaldehydes, and carbonyl compounds 2, such as aldehydes and ketones, in the presence of a catalytic amount of AuBr3 in 1,4-dioxane at 100 degrees C gave the functionalized aromatic compounds 3 in high yields. Similarly, the AuBr3-catalyzed reactions of 1 with acetal compounds 5 afforded the corresponding aromatic compounds 3 in good yields. On the other hand, when the reaction was carried out in the presence of a catalytic amount of Cu(NTf2)2 and 1 equiv of H2O in (CH2Cl)2 at 100 degrees C, the decarbonylated naphthalene products 4 were obtained selectively over 3. Benzofused heteroaromatic compounds, such as indole derivatives 13 and benzofuran derivatives 15, were also synthesized by using the present benzannulation methodology.