Effects of Promoters on a Ru／Sepiolite Catalyst for Carbon Dioxide Methanation

In this work, CO2 methanation has been investigated over Ru-based catalysts. The effects of promoters on the activity, selectivity and reduction properties of the Ru/sepiolite catalyst were analyzed by kinetic and thermodynamic methods. The catalysts were characterized by means of TPD. and the results revealed that the addition of Mo. Mn or Co improved tile properties of the Ru/sepiolite catalyst.The effects of promoters could affect the change of enthalpy,entropy and chemical potential.     

硒化银纳米枝晶的合成与表征(英)

Silver selenide nanodendrites were synthesized by the reaction of AgNO₃ and sodium selenosulfate in the presence of cetyltrimethyl ammonium bromide (CTAB). The as-synthesized sivler selenide samples were characterized by XRD, TEM and SAED. The results showed that Ag₂Se nanodendrites were of single crystalline with diameters ranging from 60～150 nm.     

Hydroxylation of 3-nitrotyrosine by hydroxyl radical

Hydroxylation of 3-nitrotyrosine (3-NT) and 3-NT containing peptide Gly-nitroTyr-Gly in aqueous solution by hydroxyl radical were investigated with gamma irradiation. The structures of the hydroxylated products were confirmed by electrospray ionization mass spectrometry and 1H NMR spectrometry. The reactivity of 3-nitrotyrosine has been investigated using density functional theory (DFT) calculation.     

Molecular Structure, Vibrational Spectrum and Ionization Energy of m-Dimethoxybenzene

The optimized molecular geometries of the three rotamers of m-dimethoxybenzene in the ground So and electronically excited Sl states were predicted by ab initio and density functional theory （DFF） calculations. Their vibrational spectra in the St state were studied by one color resonant two photon ionization （1C-R2PI） method, and their ionization energies were measured by two color resonant two photon ionization （2C-R2PI） experiment. The optimized molecular geometries showed that the total energy of conformer a was the lowest in the So state. Most of the active vibrations assigned from the 1C-R2PI spectrum were found to be of the in-plane ring modes. The ionization energies （IE） of conformers a, b and c were determined to be 63521, 64487 and 63755 cm^-1, respectively.     

The Preparation of B-type Starch Spherocrystals by Freezing Crystallization

The B-typed starch spherocrystals were prepared by the dissolution and freezing crystallization of acid-hydrolyzed starch obtained by the mild hydrolysis of maize starch. The spherocrystals were characterized with scanning electron microscope (SEM), X-ray diffraction, thermogravimetry (TG) and gel pervasion chromatogram (GPC). The results show that the preparation was a B-type spherocrystal with the average degree of polymerization of 14 glucose units, and the average diameter of crystal particles was about 7μm.     

Partial Carbamoylation of Cellulose Microspheres:a New Method to Prepare Adsorbents for Liquid Chromatography简

Micron-sized cellulose microspheres were prepared through sol-gel method using NaOH/urea solution to dissolve cellulose, then cross-linked by 1,6-hexanylene diisocyanate （HDI）, toluene 2,4-diisocyanate （TDI） and 1,4-phenylene diisocyanate （PDI）, respectively. The reaction conditions for partial modification of the microspheres were studied. The degree of substitution （DS） in cellulose was controlled by adjusting the reaction conditions. HDI-crosslinked microspheres were partially modified with phenyl isocyanate to obtain chiral stationary phases （CSPs）. The CSPs of a lower degree of crosslinking （DC） showed better chiral recognition ability than those of a higher DC. Meanwhile the CSPs prepared by pre- modification exhibited better chiral recognition ability than those prepared by pre-crosslinking.     

CRYSTALLIZATION AND MELTING OF POLY（ETHYLENE OXIDE） CONFINED IN NANOSTRUCTURED PARTICLES WITH CROSS-LINKED SHELLS OF POLYBUTADIENE

Small fixed aggregates of a poly(ethylene oxide)-block-polybutadiene diblock copolymer(PEO-b-PB)in THFsolution were obtained by adding a selective solvent for PB blocks,followed by cross-linking the PB shells.Themorphologies of the nanostructured particles with a cross-linked shell were investigated by atomic force microscopy andtransmission electron microscopy.The average behaviors of the PEO crystallization and melting confined within thenanostructured particles were studied by using differential scanning calorimetry experiments.For the deeply cross-linkedsample(SCL-1),the crystallization of the PEO blocks was fully confined.The individual nanoparticles only crystallized atvery low crystallization temperatures(T_cs),wherein the homogenous primary nucleation determined the overallcrystallization rate.For the lightly cross-linked sample(SCL-2),the confinement effect was T_c dependent.At T_c(?)42℃,thecrystallization and melting behaviors of SCL-2 were similar to those of the pure PEO-b-PB diblock copolymer.At T_c>42℃,SCL-2 could form PEO lamellae thicker than those of the pure PEO-b-PB crystallized at the same T_c.     

A New Pathway to Synthesize Cyclomercurated Ferrocenylimines Containing Heterocyclic Ring

The cyclomercurated ferrocenylimines containing heterocyclic ring were prepared by the condensation of cyclomercuration of acylferrocene with the appropriate heterocyclic amine.This procedure provides an efficient method for the synthesis of cyclomerucurated ferrocenylimines containing heterocyclic ring which are difficultly synthesized by the conventional method.The reaction mechanism is proposed.     

Synthesis and Biological Activities of N—Phosphory Branched Peptides

A series of N-phosphoryl branched peptides were synthesized by coupling of various N-phosphoryl amino acids to L-Lysine methyl ester,and their structures were confirmed by ^31PNMR,^1H NMR,MS and elemental analysis.The results of cell biological tests indicated that compound 1d and 1e obviously inhibites the growth of both k562 and A2780 cells.     

Crystallization induced micellization of poly（p-dioxanone）-block-polyethylene glycol diblock copolymer functionalized with pyrene moiety

Poly（p-dioxanone）-block-polyethylene glycol diblock copolymers functionalized with pyrene moieties（Py-PPDO-b-PEG） at the chain ends of PPDO blocks were synthesized for preparing anisotropic micelles with improved stability.The micellization and crystallization of the copolymers were investigated by nano differential scanning calorimetry（Nano DSC）,transmission electron microscopy（TEM）,UV-vis spectrophotometery,fluorophotometer,and dynamic light scattering（DLS）,respectively.The results indicated that the aggregation of pyrene induced by intermolecular interaction lead to micellization of Py-PPDO-b-PEG at much lower concentrations than those of PPDO-b-PEG copolymers without pyrene moieties.The aggregation of pyrene moieties may also serve as nucleation agent and therefore enhance the crystallization rate of PPDO blocks.Fluorescence measurements by using Nile Red as the fluorescent agent indicated that the micelles of Py-PPDO-b-PEG have high stability and load capacity for hydrophobic molecules.     

Highly Efficient and Versatile Acetalization of Glycol Catalyzed by Cupric p-Toluenesulfonate

Acetalization of glycol with carbonyl compounds was carded out catalyzed by cupric p-toluenesulfonate. These carbonyl compounds included cyclohexanone, propionoaldehyde, n-butyraldehyde, /so-butyraldehyde, n-valeraldehyde, benzaldehyde and butanone. Satisfactory results were obtained： the conversions of these carbonyl compounds were more than 90%, the selectivities were higher than 99.1%, only 0.1% mole ratio of catalyst to substrate and 90 min were sufficient in most cases. The catalyst and products were separated easily by phase separation.     

Synthesis of 2-methylpyrazine from cyclocondensation of ethylene diamine and propylene glycol over promoted copper catalyst

The 2-methylpyrazine was synthesized by catalytic reaction of ethylene diamine and propylene glycol at 380 ℃. The alumina supported copper catalysts with promoter were prepared by impregnation method, characterized by ICP-AES, BET and TPR. The results demonstrated that the dehydrogenation was improved by addition of chromium promoter. The selectivity of 2-methylpyrazine reached 84.75%, while the conversions of reactants were also enhanced.     

Effect of TiO2 Support on the Composition, Morphology and Catalytic Property of the NiB Amorphous Alloy Catalyst

Both the unsupported and supported NiB amorphous alloy catalysts (NiB and NiB/TiO2)were prepared by the chemical reduction method. Their catalytic activities were tested by thehydrogenation of sulfolene. The interactions between the NiB alloy and TiO2 were discussed forthe first time by using XRD, ICP, SEM and TEM.     

Preparation and Characterization of Nano-Structured SiO2 Thin Films on Carbon Steel

Nano-structured SiO2 thin films were prepared on the surface of carbon steel for the first time by LPD. The compositions of the films were analyzed by XPS, and the surface morphology of the thin films were observed by AFM. The thin films were constituted by compact particles of SiO2, and there was no Fe in the films. In the process of film forming, the SiO2 colloid particles were deposited or absorbed directly onto the surface of carbon steel substrates that were activated by acid solution containing inhibitor, and corrosion of the substrates was avoided. The nano-structured SiO2 thin films that were prepared had excellent protective efficiency to the carbon.     

Studies on Pervaporation Separation of Ethanol/Water Mixtures with Membranes of Polypropylene Sulfonate Salts

Sulfonated polypropylene membranes loaded with different kinds of counter-ions were prepared by heterogeneous chiorosulfonation reaction of polypropylene membrane followed by hydrolysis and ion-exchange reaction. The membranes obtained were used for selective separation of ethanol/water mixtures by pervaporation. The effects of counter-ion species, ion-exchange capacity, solution composition, thickness of membrane and temperature on the separation behavior of the membranes were investigated. Microstructure and morphology of the membranes were examined by X-ray and SEM as well.     

An Efficient Synthetic Method to Nonnatural α- and β-Tryptophan Analogues via Friedel-Crafts Alkylation of Indoles with Nitroacrylates

The Friedel-Crafts alkylation of indoles with nitroacrylates could provide α- and β-tryptophan nitro-precursors, respectively, in moderate to good yields under Lewis acid catalysis. The diastereoselectivities of the reaction were enhanced by using 2-substituted indoles. The alkylation products could be easily transformed to nonnatural tryptophan derivatives.     

ESTIMATION OF REACTIVITY RATIOS OF METHYL ACRYLATE WITH N-ARYLMETHACRYL-AMIDE COPOLYMERS BY ~1H NMR METHOD

The copolymerizations of methyl acrylate (MA) with different N- arylmethacrylamide (N-ArMA) were carried out in benzene solution by free radical initiation. The compositions of the copolymers were deter mined by ~1H NMR method. The monomer reactivity ratios were calculated by the Fineman-Ross (F-R) method. The reactivity ratios and the activity of various N-ArMA with MA were investigated.     

Preparation and Characterization of Polyborosiloxanesand Their Blends with Phenolic Resin as ShapeableCeramic Precursors简

Two polyborosiloxanes(PBSis) with char yield up to 74.13% at 800 °C were synthesized by the direct polycondensation of boric acid with phenyltrimethoxysilane in diglyme. The PBSis were characterized by gel permeation chromatography, IR spectroscopy as well as1H-,29Si- and11B-NMR. PBSi modified phenol-formaldehyde resins(PBSi/PFs) were prepared at different PBSi/PF mass ratios and were cured at 150 °C. The PBSi/PFs were characterized by IR spectroscopy, scanning electron microscopy, thermogravimetric analysis and tensile test. The results revealed that the cured PBSi/PFs had sea-island morphology and higher char yield than the common PF. PBSi/PF blend with PBSi/PF mass ratio of 0.4:1 had char yield up to 70.83% at 800 °C. The PBSi/PFs had tensile strength similar to PF. The ceramization of PBSi/PFs was also studied. The silicon boron oxycarbide(SiBOC) ceramics formed were characterized by IR spectroscopy and elemental analysis. This method provided a valuable way to prepare easily shapeable polymer blends as ceramic precursors.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.