Synthesis and Spectral Properties of Ni(II), Pd(II), Pt(II), and Pt(IV) Tetraphenyltetrabenzoporphyrinates

Complexation reactions of 5,10,15,20-tetraphenyltetrabenzoporphyrin and transmetallation of its cadmium complex with nickel(II) acetate, Ni(II), Pd(II), and Pt(II) chlorides in dimethylformamide and phenol have been studied. The corresponding Ni(II), Pd(II), and Pt(II) porphyrinates have been synthesized. Pt^IVBr₂ porphyrinate has been obtained by the treatment of Pt(II) 5,10,15,20-tetraphenyltetrabenzoporphyrinate with bromine in chloroform. The obtained compounds have been characterized by elemental analysis, electronic absorption and ¹H NMR spectroscopy and mass spectrometry.     

Synthesis, thermal, spectral and magnetic studies of complexes of Co(II), Ni(II), Cu(II), Ru(II), Pd(II) and Pt(II) with 2, 3-disubstituted quinazolin-(3H)-4-ones

A number of complexes of Co(II), Ni(II), Cu(II), Ru(II), Pd(II) and Pt(II) with 2-methyl-3-(carboxy methyl) quinazolin (3H)-4-one (MCMQ) and 2-phenyl-3-(carboxy methyl) quinazolin (3H)-4-one (PCMQ) have been synthesized and characterized by analytical, conductivity, thermal, magnetic, infrared, electronic, proton magnetic resonance and electron spin resonance spectral data. Based on analytical data, the stoichiometry and the association with other molecules of the complexes have been determined. Conductivity data show that all these complexes are nonelectrolytes. Infrared and PMR spectral data indicate that both the ligands are uninegative bidentate with all the metal ions. Based on electronic spectral data, the geometries of the complexes have been indicated. Electronic spectral parameters for Co(II) and Ni(II) and ESR parameters for Cu(II) complexes have been calculated and relevant conclusions have been drawn with respect to the nature of bonds present in them.     

Initial structure modification of tetrahedral to planar nickel(II) in a nickel-iron-sulfur cluster related to the C-cluster of carbon monoxide dehydrogenase

A method has been devised that creates a planar Ni(II) site from a tetrahedral site in a NiFe(3)S(4) cubane-type cluster. Reaction of [(Ph(3)P)NiFe(3)S(4)(LS(3))](2)(-) (2) with 1,2-bis(dimethylphosphino)ethane affords [(dmpe)NiFe(3)S(4)(LS(3))](2)(-) (3), isolated in ca. 45% yield as (Et(4)N)(2)[3a].2.5MeCN and (Et(4)N)(2)[3b].0.25MeCN, both of which occur in triclinic space group P. Each crystalline form contains two crystallographically inequivalent clusters with the same overall structure but slightly different dimensions. The cluster is bound by three thiolate terminal ligands to semirigid cavitand ligand LS(3). The NiFe(3)S(4) core contains three tetrahedral sites, one Fe(micro(3)-S)(3)(SR) and two Fe(micro(3)-S)(2)(micro(2)-S)(SR) with normal metric features, and one distorted square planar Ni(micro(3)-S)(2)P(2) site in a Ni(micro(3)-S)(2)Fe face with mean bond lengths Ni-P = 2.147(9) A and Ni-S = 2.29(2) A. The opposite Fe(2)(micro(3)-S)(micro(2)-S) face places the micro(2)-S atom at nonbonding and variable distances (2.60-2.90 A) above the nickel atom. Binding of the strong-field ligand dmpe results in a planar Ni(II) site and deconstruction of the full cubane geometry. The structure approximates that established crystallographically in the C-cluster of C. hydrogenoformans carbon monoxide dehydrogenase whose NiFe(4)S(4) core contains a planar NiS(4) site and three tetrahedral FeS(4) sites in a fragment that is bridged by sulfide atoms to an exo iron atom. M?ssbauer studies of polycrystalline samples containing both clusters 3a and 3b reveal the presence of at least two cluster types. The spectroscopically best defined cluster accounts for ca. 54% of total iron and exhibits hyperfine interactions quite similar to those reported for the S = (5)/(2) state of the protein-bound cubane-type cluster [ZnFe(3)S(4)](1+), whose M?ssbauer spectrum revealed the presence of a high-spin Fe(2+) site and a delocalized Fe(2.5+)Fe(2.5+) pair. Development of reactions leading to a planar nickel and a sulfide-bridged iron atom is requisite to attainment of a synthetic analogue of this complex protein-bound cluster. This work demonstrates a tetrahedral (2) --> planar (3) Ni(II) stereochemical conversion can be effected by binding of ligands that generate a sufficiently strong in-plane ligand field (dmpe = 1,2-bis(dimethylphosphino)ethane, LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-)).     

Square planar Ni(II) thiosemicarbazone complexes as functional models for carbon monoxide dehydrogenase

Two Ni(II) complexes, [Ni(dmoTSCH)Cl] (1) and [Ni(dmoPhTSCH)Cl] (2) of the tridentate thiosemicarbazone ligands diacetylmonooxime thiosemicarbazone (dmoTSCH₂) and diacetylmonooxime (4-phenyl)thiosemicarbazone (dmoPhTSCH₂) have been synthesized. X-ray crystal structure of [Ni(dmoTSCPhTSCH)Cl] (2) indicates that the Ni(II) assumes a square planar geometry in the complexes, with the ligand coordinated in a monoanionic N,N,S donor mode and the fourth coordination position of Ni(II) is occupied by a chloride ion. Cyclic and differential pulse voltammetric experiments suggest that the Ni(II) complexes can undergo a two electron reduction at about ?1.0V. It is shown that the Ni(II) complexes in DMF or DMSO solutions can mimic CO-dehydrogenase activity by oxidizing CO to CO₂ in presence of a base like NaOAc and a sacrificial electron acceptor like methyl viologen and the colour of the resultant MV^.+ can be used to monitor the reaction.     

Self-assembly of D-penicillaminato M6M'8 (M = Ni(II), Pd(II), Pt(II); M' = Cu(I), Ag(I)) clusters and their organization into extended La(III)M6M'8 supramolecular structures

A series of chiral M(6)M'(8) cluster compounds having twelve free carboxylate groups, [M(6)M'(8)(D-pen-N,S)(12)X](5-) (M/M'/X = Pd(II)/Ag(I)/Cl(-) ([1](5-)), Pd(II)/Ag(I)/Br(-) ([2](5-)), Pd(II)/Ag(I)/I(-) ([3](5-)), Ni(II)/Ag(I)/Cl(-) ([4](5-)), Pt(II)/Ag(I)/Cl(-) ([5](5-)), Pd(II)/Cu(I)/Cl(-) ([6](5-)); D-H(2)pen = D-penicillamine), in which six cis-[M(D-pen-N,S)(2)](2-) square-planar units are bound to a [M'(8)X](7+) cubic core through sulfur-bridges, was synthesized by the reactions of cis-[M(D-pen-N,S)(2)](2-) with M' in water in the presence of halide ions. These M(6)M'(8) clusters readily reacted with La(3+) in aqueous buffer to form La(III)(2)M(6)M'(8) heterotrimetallic compounds, La(2)[1](CH(3)COO), La(2)[2](CH(3)COO), La(2)[3](CH(3)COO), La(2)[4](CH(3)COO), La(2)[5](CH(3)COO) and La(2)[6]Cl, in which the M(6)M'(8) cluster units are linked by La(3+) ions through carboxylate groups in a 1?:?2 ratio. While the La(III)(2)M(6)Ag(I)(8) compounds derived from [1](5-), [2](5-), [3](5-), [4](5-) and [5](5-) have a 1D helix supramolecular structure with a right-handedness, the La(III)(2)Pd(II)(6)Cu(I)(8) compound derived from [6](5-) has a 2D sheet-like structure with a triangular grid of the Pd(II)(6)Cu(I)(8) cluster units. When aqueous HCl was added to the reaction solution of [6](5-) and La(3+), another La(III)(2)Pd(II)(6)Cu(I)(8) heterotrimetallic compound, La(2)[6]Cl·HCl, in which the Pd(II)(6)Cu(I)(8) cluster units are linked by La(3+) ions to form a 2D structure with a rectangular grid, was produced. The solid-state structures of these La(III)(2)M(6)M'(8) compounds, determined by single-crystal X-ray crystallography, along with the spectroscopic properties of the M(6)M'(8) cluster compounds in solution, are described.     

The preparation of M(PR3)2 (S2(S)PC6H4OMe) (M=Ni,Pd, Pt) from Lawessons reagent

Summary Reaction of Lawessons reagent (MeOC₆H₄P(S)S₂P(S)C₆H₄OMe) (1) withbis-phosphine-dihalide complexes of nickel, palladium and platinum proceeds with asymmetric bridge cleavage to give M(PR₃)₂(S₂(S)PC₆H₄OMe) (2). The new compounds were characterised by³¹P n.m.r., i.r. and microanalyses.     

Untersuchungen zur Alkylierung von Bis-Stilbendithiolato-Komplexen des Ni(II), Pd(II) und Pt(II)

Investigation on the Alkylation of Bis-Stilbendithiolato Complexes of Ni^II, Pd^II, and Pt^II Alkylation reactions of co-ordinated ligands of the type of ethylene-bisthiol R₂S₂C₂²-proceed different depending on the substituents R. The neutral complexes isolated by a alkylation of the nickel bis-chelates (R = phenyl) according to Schrauzer and Rabinowitz and formulated by these authors as mixed ligand chelates of dithiolate and diether, were identified by us as complexes of the monoethers of the ligand. These nickel (II) complexes of the mono-ethers can not be alkylated further by alkyliodides. Oxidative coupling of two ligands yields disulfides which have been identified by mass spectroscopy thus indicating the original position of attack of the alkylating reagent. The formation of bis-monether complexes is reflected by the different charges on the S atoms of the model complex [Ni(CH₃S₂C₂H₂)(S₂C₂H₂)]- obtained from EHT and CNDO calculations. Both possible stereo-isomers have been isolated of the bis-methylmonether complex of Pt(II). Trans-[M((CH₃)(S₂C₂Ph₂))₂] (M = Ni(II), Pd(II)) form CH₂Cl₂ adducts. By treating the Ni-bis complexes of the monoalkylthioethers with iodine polyiodides are prepared. Binuclear Pd(II) complexes of composition [Pd₂((R)(S₂C₂Ph₂))₂Cl₂] could be prepared by metal exchange.     

Synthesis of a one-dimensional metal-dimer assembled system with interdimer interaction, M2(dtp)4 (M = Ni, Pd; dtp = dithiopropionato)

A metal-dimer assembled system, M(2)(dtp)(4) (M = Ni, Pd; dtp = dithiopropionate, C(2)H(5)CS(2-)), was synthesized and analyzed by the X-ray single-crystal diffraction method, UV-vis-near-IR spectra of solutions, solid-state diffuse reflectance spectroscopies, and electrical conductivity measurements. The structures exhibit one-dimensional metal-dimer chains of M(2)(dtp)(4) with moderate interdimer contact. These complexes are semiconducting or insulating, which is consistent with the fully filled d(z)2 band of M(II)(d(8)). Interdimer metal-metal distances were 3.644(2) Angstroms in Ni(2)(dtp)(4) and 3.428(2) Angstroms in Pd(2)(dtp)(4), each of which is marginally longer than twice the van der Waals radius of the metal. Interdimer charge-transfer transitions were nevertheless observed in diffuse reflectance spectra. The origin of this transition is considered to be due to an overlap of two adjacent d(sigma) orbitals, which spread out more than the d(z)2 orbital because of the antibonding d(sigma) character of the M(d(z)2)-M(d(z)2). The Ni(2)(dtp)(4) exhibited an interdimer charge-transfer band at a relatively low energy region, which is derived from the Coulomb repulsion of the 3d(sigma) orbital of Ni.     

Geometric, electronic, and bonding properties of AuNM (N = 1-7, M = Ni, Pd, Pt) clusters

Employing first-principles methods, based on density functional theory, we report the ground state geometric and electronic structures of gold clusters doped with platinum group atoms, Au(N)M (N = 1-7, M = Ni, Pd, Pt). The stability and electronic properties of Ni-doped gold clusters are similar to that of pure gold clusters with an enhancement of bond strength. Due to the strong d-d or s-d interplay between impurities and gold atoms originating in the relativistic effects and unique properties of dopant delocalized s-electrons in Pd- and Pt-doped gold clusters, the dopant atoms markedly change the geometric and electronic properties of gold clusters, and stronger bond energies are found in Pt-doped clusters. The Mulliken populations analysis of impurities and detailed decompositions of bond energies as well as a variety of density of states of the most stable dopant gold clusters are given to understand the different effects of individual dopant atom on bonding and electronic properties of dopant gold clusters. From the electronic properties of dopant gold clusters, the different chemical reactivity toward O(2), CO, or NO molecule is predicted in transition metal-doped gold clusters compared to pure gold clusters.     

Telluro- and seleno-bridged TiIV-MII (M = Ni,Pd, Pt) heterobimetallic complexes

Summary Heterobimetallic complexes of the types [Cp₂Ti(-EAr)₂-M(dppe)] (ClO₄)₂ [(1)–(4); M, E = Ni, Te (1); Ni, Se (2); Pt, Te (3); Pt, Se (4); Ar = Ph (a), C₆H₄-4-Me (b), C₆H₄-4-OMe (c), C₆H₄-4-OEt (d)] and [Cp₂Ti(-TeAr)₂-MCl ₂] [M = Pd (5), Pt (6)] were obtained by the reactions of Cp₂Ti(EAr)₂ with M(dppe)(ClO₄)₂ and M(PhCN)₂Cl₂, respectively. While (1), (5) and (6) are stable in the solid state as well as in solution, (2)–(4) undergo dissociation to M(dppe)(EAr)₂ and Cp₂Ti(ClO₄)₂ in solution, as shown by multinuclear (³¹P{¹H},¹⁹⁵Pt{¹H}, ¹²⁵Te{¹H}) n.m.r. studies. The reaction of Cp₂Ti(SeAr)₂ with M(PhCN)₂Cl₂, however, leads to the formation of Cp₂TiCl₂ and a polymeric material [M(SeAr)₂] _n .     

Theoretical design of novel trinuclear sandwich complexes with central M3 triangles (M = Ni, Pd, Pt)

On the basis of the 18-electron rule, we theoretically designed a series of sandwich complexes [M(3)L(2)(CO)(3)](q) (M = Ni, Pd, Pt; L = C(7)H(7), P(5), P(6), As(5), As(6); q = 2+, 0, or 2-) by means of density functional theory computations. These sandwich structures are of high stability, revealed by their strong donating and back-donating metal-ligand interactions, considerable aromatic characters as well as sizable energy gaps. All these proposed sandwich structures might serve as promising building blocks for new nanomaterials.     

Thin-film conducting polymers based on Ni(II), Pd(II), and Pt(II) complexes with 8-quinolinol

New thin polymeric films were prepared electrochemically on the basis of Ni(II), Pd(II), and Pt(II) complexes with 8-quinolinol, and conditions of synthesis were optimized. Basic characteristics of the films such as the thickness, charge transfer rate in the polymeric matrix, and photovoltaic effect were determined.     

Ab initio studies on vibrational spectra of Ni(II), Pd(II), and Pt(II) complexes of M'X4(2-) and M'OS3(2-) (M' = Mo, W; X = O, S)

The vibrational spectra of MM'2X8(2-) and trans-MM'2S6O2(2-) (M = Ni(II), Pd(II), Pt(II); M' = Mo, W; X = O, S) are calculated using ab initio method at RHF/LanL2DZ level. The calculated vibrational frequencies of MM'2S8(2-) and trans-MM'2O2S6(2-) are evaluated via comparison with experimental data. The results obtained by this method have the deviation <5% for M'S and MS stretching vibrational frequencies, however, relatively higher deviation is obtained for M'O stretching vibrational frequencies. Some vibrational frequencies of these complexes that have not been experimentally reported are also predicted and some of the experimental values are assigned.     

Synthesis and characterization of Ni(II), Pd(II) and Pt(II) complexes of 2,4-diamino-5-(3, 4, 5-trimethoxybenzyl)pyrimidine complexes

The Ni(II), Pd(II) and Pt(II) complexes of 2,4-diamino-5-(3,4,5-trimethoxybenzyl)pyrimidine (trimethoprim) have been synthesized and characterized by elemental analysis, electronic and IR spectroscopy, and magnetic susceptibility measurements. The single-crystal X-ray structure of the Ni(II) complex is reported. Ni(II) is coordinated to the N(1) atoms of two trimethoprim molecules that act as monodentates. Octahedral coordination around the nickel atom is completed by coordination to two molecules of methanol and two acetate ions. Pd(II) and Pt(II) complexes are square planar and the metal ions coordinate one molecule of trimethoprim, two chloride ions and a molecule of water.     

Metal substitution in the active site of nitrogenase MFe(7)S(9) (M = Mo(4+), V(3+), Fe(3+))

The unifying view that molybdenum is the essential component in nitrogenase has changed over the past few years with the discovery of a vanadium-containing nitrogenase and an iron-only nitrogenase. The principal question that has arisen for the alternative nitrogenases concerns the structures of their corresponding cofactors and their metal-ion valence assignments and whether there are significant differences with that of the more widely known molybdenum-iron cofactor (FeMoco). Spin-polarized broken-symmetry (BS) density functional theory (DFT) calculations are used to assess which of the two possible metal-ion valence assignments (4Fe(2+)4Fe(3+) or 6Fe(2+)2Fe(3+)) for the iron-only cofactor (FeFeco) best represents the resting state. For the 6Fe(2+)2Fe(3+) oxidation state, the spin coupling pattern for several spin state alignments compatible with S = 0 were generated and assessed by energy criteria. The most likely BS spin state is composed of a 4Fe cluster with spin S(a) = (7)/(2) antiferromagnetically coupled to a 4Fe' cluster with spin S(b) = (7)/(2). This state has the lowest DFT energy for the isolated FeFeco cluster and displays calculated M?ssbauer isomer shifts consistent with experiment. Although the S = 0 resting state of FeFeco has recently been proposed to have metal-ion valencies of 4Fe(2+)4Fe(3+) (derived from experimental M?ssbauer isomer shifts), our isomer shift calculations for the 4Fe(2+)4Fe(3+) oxidation state are in poorer agreement with experiment. Using the Mo(4+)6Fe(2+)Fe(3+) oxidation level of the cofactor as a starting point, the structural consequences of replacement of molybdenum (Mo(4+)) with vanadium (V(3+)) or iron (Fe(3+)) in the cofactor have been investigated. The size of the cofactor cluster shows a dependency on the nature of the heterometal and increases in the order FeMoco < FeVco < FeFeco.