光子晶体在微波技术中的应用

文章以高方向性天线及光子晶体微带传输线为例，综述了光子晶体在微波技术中的研究进展．将光子晶体与传统的微波技术相结合，可以设计并制作许多小型、高效的新型微波器件．这类新型光子晶体材料在微波通讯中有着广阔的应用前景。     

Bragg Reflectors and Resonators in Microstrip Technology Based on Electromagnetic Crystal Structures

Recently, new promising two-dimensional (2-D) Photonic Bandgap Structures (PBG), or more properly Electromagnetic Crystal Structures, for microstrip lines have been proposed. In this paper, we analyze these structures in a manner like a Bragg reflector in optical wavelengths. Joining two of such Bragg like reflectors by means of a conventional microstrip transmission line allows one to design Bragg Resonators. The 2-D periodic pattern of the electromagnetic crystal structure is implemented with circles etched in the ground plane of the microstrip line by means of a numerical milling machine. Simulations have been performed by using HP ^TM Momentum and MDS software, and in accordance with the measurements give, for the Electromagnetic Crystal Structures, new promising potential applications both in microwave and millimeter wave integrated circuits, and also in the experimentation of expensive short wavelength (including photonic) devices by using simpler and cheaper microwave down scaling.     

色散负折射特异介质的1维光子晶体缺陷态

在1维光子晶体中引入色散负折射特异介质,分析了其介电常数和磁导率在微波区（1～10 GHz）与频率的关系。分别对以色散负折射介质为缺陷的正折射率介质光子晶体及以正折射率介质为缺陷的正负折射率介质光子晶体进行了数值仿真,得出了均匀平面电磁波在正入射和斜入射时的透射谱。结果表明:在介电常数和磁导率均为负值的不同禁带中,分别出现了单、双缺陷模。利用透射谱的这一特点,可实现单、双通道滤波。     

修正的频域有限差分法在二维金属光子晶体分析中的应用

与介质光子晶体相比,金属光子晶体的带隙特性在毫米波和亚毫米波波段有着重要的应用价值.基于Yee网格的频域有限差分法推导得出的本征模方程,求解后能方便而又可靠地得出介质光子晶体的带隙图和场分布.但由于金属与介质的本质差异,该方法不能直接应用于金属光子晶体.文中引入了金属表面边界条件,推导了二维金属周期结构的光子带隙本征模方程.通过数值计算,得出了不同晶格结构（正方/三角格子）下两种模式（TE/TM）的全禁带特性,并与介质周期结构的禁带特性进行对比,分析了金属周期结构在模式选择和器件集成方面的优点.     

修正的频域有限差分法在二维金属光子晶体分析中的应用

与介质光子晶体相比,金属光子晶体的带隙特性在毫米波和亚毫米波波段有着重要的应用价值.基于Yee网格的频域有限差分法推导得出的本征模方程,求解后能方便而又可靠地得出介质光子晶体的带隙图和场分布.但由于金属与介质的本质差异,该方法不能直接应用于金属光子晶体.文中引入了金属表面边界条件,推导了二维金属周期结构的光子带隙本征模方程.通过数值计算,得出了不同晶格结构（正方/三角格子）下两种模式（TE/TM）的全禁带特性,并与介质周期结构的禁带特性进行对比,分析了金属周期结构在模式选择和器件集成方面的优点. 关键词： 金属光子晶体 频域有限差分法 全禁带     

Existing conditions of full bandgaps and absolute negative refraction in metallic-dielectric photonic crystal

This paper has theoretically studied the characteristic frequencies of band structures in two-dimensional metallic-dielectric photonic crystals. It is demonstrated that a large filling fraction benefits the existence of absolute photonic band gap, while a smaller filling fraction benefits an absolute negative refraction band. In addition, it also finds that the relation between the cut-off frequency of E-polarized wave and the filling fraction exceeding 10{\%} is content with a linear increasing function, whose coefficients are exponential to the normalized lattice constant. These investigations have significant implications for tuning the operational frequencies to desired applications and manufacturing photonic crystals.     

利用含负折射率材料的光子晶体实现角度滤波器

利用光子晶体的共振隧穿效应，并结合由负折射材料引起的零平均折射率带隙，设计出一种新型的角度滤波器，使得对于某一频率范围内的入射电磁波仅在特定入射角度的波能够全透，而其他角度的波不能透过.这将在微波器件乃至光学器件上有广泛应用. 关键词： 光子晶体 负折射率材料 共振隧穿     

电磁波在周期介质中的传播及二维光子晶体的光子带结构

光子晶体是光学与凝聚态物理交叉的新领域,也是近年来应用物理学的一个重要研究领域,它是一种由介电常数高的(低的)介质在另一种介电常数低的(高的)背景介质中周期排列所组成的人造多维周期结构材料,能够产生光子带隙。频率落在带隙内的光在晶体里沿任何方向都不能传播,因而具有能够抑制原子、分子的自发辐射等诱人的光电子学特性,在基础研究和实际应用上都有着巨大的潜力。本文在这一领域里进行了富有成效的研究,获得了很好的结果。主要有:(1)利用平面波展开方法来计算二维光子晶体的带隙结构。首先,我们设计正方晶胞的二维光子晶体模型。设x₃方向为介质柱的轴方向,二维周期结构在x₁-x₂平面上。晶胞的晶格常数为a,半径为r,介质柱和空气柱的介电常数分别为ε_a=17和ε_b=1,a>2r。设计的核心思想是通过降低光子晶体结构的对称性,消除光子能带在晶体的布里渊区高对称点上的本征简并。(2)对于二维光子晶体的电磁波理论及周期介质中的Bloch波解做了详细的推导,给出了光子晶体中禁带存在的理论依据。同时以正方格子晶格的二维光子晶体为例,验证了电介质在空气圆孔中的排列存在E偏振和H偏振的光子带隙重叠区,称为绝对光子带隙。对于二维的光子晶体,两种本征偏振模式的光子能带结构可以独立地调节,以实现两者的光子带隙的最优重叠, 从而大大提高了二维光子晶体的完全带隙宽度。     

Nonlinear transmission and reflection characteristics of plasma/polystyrene one dimensional photonic crystal

Reflection and transmission properties of one-dimensional plasma/polystyrene nonlinear photonic crystal have been investigated theoretically. Reflectance and transmitted amplitude of electromagnetic waves through these periodic multilayered structures are calculated for different intensities of controlling wave. It is found that the reflectance of the proposed structures depends on the intensity of the controlling wave and this property can be exploited in the design of WDM coupler, filter, optical logic gates, etc.     

一维光子晶体禁带的展宽

作为一维光子晶体的应用基础，一维光子晶体的禁带是研究的重点。通过传输矩阵的方法分析了一维光子晶体禁带的特性，讨论了影响带宽的因素。说明了相对带宽对光子晶体设计的重要性。在这个基础上讨论了扩展一维光子晶体带宽的方法，提出了在角域范围内对光子晶体进行叠加的方法，为设计制造一维光子晶体提供了一种行之有效的方法。分别对2个、3个和4个晶体的叠加进行了分析，最后计算了所设计的合成晶体的反射率。其中4个晶体的叠加，相对带宽达到57．52％，极大地展宽了一维光子晶体的禁带，从而证明利用角域的叠加来展宽一维光子晶体的禁带是非常有效的。     

Different kinds of band-pass filters based on one-dimensional photonic crystal heterostructures

Three kinds of band-pass filters (BPFs), termed a TE BPF, a TM BPF and a BPF at oblique incidence, are designed by crossing the band edges of two different one-dimensional (1D) photonic crystals (PCs). The TE BPF, fulfilling the function of high reflectivity for p-polarization and high transmittance in a narrow pass-band for s-polarization, is constructed by two subPCs, one of which is obtained by decreasing the lattice constant of the other one while the other parameters keep the same. The TM BPF also comprises two subPCs, but the materials of one subPC are quite different with those of the other one. Similarly, the BPF at oblique incidence, from which both polarization waves can transmit in a narrow pass-band at oblique incidence, is composed of two different subPCs. Note that, the distribution of the wave impedance of material in each BPF should be periodic to prevent unexpected defect modes. The new filters not only provide narrow pass-bands and wide non-transmission bands, but also have simple structures. This is a result of the fact that the wave impedance ratio between composites is enlarged by introducing magnetic materials. The new designs have potential applications in optical filters and optical integrated circuits.     

Modelling of 3D photonic crystals based on opals

The construction of 3D photonic crystals with gaps in the visible or the near-infrared frequency range requires engineering of complex microstructures which are very difficult to realize by etching and micro-fabrication. Consequently, self-ordered systems such as synthetic opals are very promising. Synthetic bare opals are constituted by SiO₂ spheres that organize themselves by a sedimentation process in a face centered cubic (fcc) arrangement. Using the plane wave method, we examine the photonic band structures of close-packed opal-based photonic crystals with an SiO₂ (n = 1.5) matrix. The incomplete photonic band gaps at the X- and L-points have been studied which correspond to normally incident plane waves onto the (100) and (111) crystal planes. With the transfer matrix method, we model the transmission properties. We find that the incomplete gap at the L-point fully inhibits the transmission of waves propagating in the [111] direction for opal sample thicknesses that are easily obtainable. This property shows that bare opals could be good candidates for complete inhibition of transmission in the near-infrared and visible frequency range for given orientations.     

用于短波段发光二极管的二维光子晶体禁带研究

运用平面波展开法(PWE),针对光子晶体在短波长段发光二极管(LED)领域上的应用,主要选择高频禁带模式,研究了4种具有较大应用潜力的二维光子晶体结构,包括正方空气柱结构、三角空气柱结构、正方介质柱结构和三角介质柱结构。在不同晶格常数、占空比(AFF)、柱半径和晶格常数比下,分析了TE模式和TM模式光子禁带的变化。数据分析表明,光子禁带中心波长随AFF增加而变小。相比于其他结构,正方介质柱结构更适于短波段光子晶体LED来提高其出光效率,三角介质柱结构和三角空气柱结构适合用于构造短波段偏振光LED。     

含负折射率材料的异质结构光子晶体的光学传输特性

利用传输矩阵法研究了正负折射率材料构成的异质结构光子晶体的光学传输特性。结果表明:当入射波正入射时,在这种异质结构光子晶体内出现了光子带隙,并且带隙内出现了3个极窄的透射峰,这是正负交替光子晶体和常规材料构成的同周期一维异质结构光子晶体所不具有的新颖物理特性。计算了这种异质结构光子晶体的透射谱。发现:这3个透射峰不敏感于入射角的变化,而在带隙两侧的透射峰则会随着入射角增大统一向带隙靠近;能带敏感于晶格厚度和周期数的变化。     

基于等离子体缺陷层的一维可调谐微波光子晶体滤波特性

等离子体填充到一维介质-真空微波光子晶体的缺陷层构成一种可调谐单通道滤波器.据等离子体的强色散特性,其等效折射率与电磁波频率及等离子体频率等参数有关,因而可以通过改变等离子参数,使一维微波光子晶体缺陷层的谐振频率发生偏移,实现微波光子晶体的可调谐滤波特性.介质层和等离子体层分别采用了时域有限差分（FDTD）算法及分段线性电流密度卷积时域有限差分（PLJERC-FDTD）算法.数值模拟表明,通过改变等离子体频率可以实现滤波通道在光子禁带内较大带宽范围的移动. 关键词： 等离子体 微波光子晶体 可调谐滤波     

Phonon-polariton and band structure of electro-magneto-acoustic SH wave propagation oblique to the periodic layered piezoelectric structures

Electro-magneto-acoustic SH waves propagating oblique to the periodic layered piezoelectric structures are studied under the coupling of the acoustic wave and the electromagnetic wave. Band structures of the so-called piezoelectric superlattice and phononic/photonic crystal are given both at acoustic frequencies and at optical frequencies. For the periodic layered piezoelectric structures, phonon-polaritons (the coupling modes of the phonons and photons) are found not only happening near the center of the Brillouin zone (in the long-wavelength limit) at acoustic frequencies, but also being able to appear in the whole Brillouin zone at optical frequencies. Appearing of these phonon-polaritons may provide a way to design a new type of acousto-optic devices.     

二维正方晶格各向异性光子晶体缺陷模

为了得到对TM和TE模具有相同缺陷模的共振微腔,通过在完整各向异性碲介质柱二维正方光子晶体中,引入各向同性的介质圆柱作为点缺陷,利用超胞平面波展开法计算该光子晶体的缺陷模,系统计算了在同时改变点缺陷介质柱介电常数和半径两种情况下的两种偏振缺陷模的变化规律。结果表明,在完全禁带中,缺陷介质柱介电常数从5.44变化到38.44、半径与晶格常数的比从0.05变化到0.50的整个区域,均会出现对TM和TE模具有相同缺陷模,且随着介电常数的减小,缺陷模随着缺陷半径的变化趋于缓慢,归一化共振频率在0.241 8~0.243 2之间可调,在引入ε_e＜ε_o的各向异性介质柱缺陷时,亦可得到对TM和TE模具有相同缺陷模,且共振频率的可调范围增大,该研究为光子晶体器件的设计提供了理论依据。     

Photonic crystals for the visible spectrum by holographic lithography

We describe a general and flexible technique for the fabrication of three-dimensional photonic crystals that is particularly well adapted to the production of structures with the sub-micron periodicity required for applications in the visible optical spectrum. Three-dimensional microstructure is generated by using a four-beam laser interference pattern to expose a thick layer of photoresist. Exposed areas are rendered insoluble; unexposed areas are dissolved away leaving a three-dimensional photonic crystal formed of cross-linked polymer with air-filled voids. The polymeric structure may be used as a template for the production of photonic crystals with higher refractive index contrast. Photonic crystals made of polymer and of TiO₂ have been characterized by scanning electron microscopy and by optical diffraction measurements.     

二维金属光子晶体的带结构研究

采用一种新的平面波展开法研究金属光子晶体的带结构，即在传统平面波展开法的基础上，将“原问题”拓展，引入一个“新问题”，通过求解“新问题”得到“原问题”的带结构，并论证了它们之间的关系.为了准确求解“新问题”，引入辅助函数，将其色散关系等价为一个积分微分本征方程，求解这个本征方程得到“新问题”的带结构，从而由此导出“原问题”的带结构.最后，以正方晶格二维金属光子晶体为例，进行数值计算，得到了满意的结果. 关键词： 金属光子晶体 平面波展开法 带结构 正方晶格     

Smith-Purcell radiation from a charge running near the surface of a photonic crystal

Smith-Purcell radiation from a charge running near a photonic crystal is calculated for a slab system of a periodic array of dielectric spheres, with the photonic band effect taken into account exactly. The radiation spectrum has a series of resonantly enhanced structures, which are shown to arise accompanying the excitation of the photonic bands. It is also shown that the overall intensity of the emission band does not depend very strongly on the slab thickness but the height of the resonant peaks increases progressively with thickness due to the enhanced Q value of excited photonic bands.