Intramolecular N to N acyl migration in conformationally mobile 1′-acyl-1-benzyl-3′,4′-dihydro-1′<Emphasis Type="Italic">H</Emphasis>-spiro[piperidine-4,2′-quinoline] systems promoted by debenzylation conditions (HCOONH<Subscript>4</Subscript>/Pd/C)

We report an efficient and useful synthesis of new attractive spiropiperdine scaffolds 4 based on an intramolecular acyl transfer process in 1′-acyl-1-benzyl-3′,4′-dihydro-1′H-spiro[piperidine-4,2′-quinolines] 3 using simple and mild debenzylation reaction conditions (HCOONH₄/Pd/C). The compounds 3 were prepared by acylating 1-benzyl-4′-methyl-3′,4′-dihydro-1′H-spiro[piperidine-4,2′-quinolines] 2 that are easily available from 1-benzyl-4-piperidone 1. The intramolecular character of this process was proven primarily through a crossover experiment technique. Through an examination of all spectroscopic information (¹H, ¹³C NMR, VT-¹H NMR, and ²D NMR) it was possible to correctly predict amide configurations and piperidine ring conformations of starting and final spiropiperidine compounds.      

Complexation of [2.2]paracyclophane with β- and γ-cyclodextrins studied by HPLC and NMR

The NMR spectra of [2.2]paracyclophane with β- or γ-cyclodextrin in DMF-d₇ at room temperature do not show significant complexation, while HPLC of the complexes in mixed H₂O:alcohol solvents demonstrate complexation with different stoichiometries. At 243 K in DMF solution the H3 and H5 NMR signals of γ-cyclodextrin (but not β) exhibit complexation-induced chemical shifts denoting complex formation. According to HPLC, at room temperature the [2.2]paracyclophane complex with β-cyclodextrin in 20% H₂O:EtOH exhibits 1:2 stoichiometry with K ₁ = 1×10² ± 2, K ₂ = 9.0×10⁴ ± 2×10³ (K = 9×10⁶) while that with γ-cyclodextrin in 50% H₂O:MeOH exhibits 1:1 stoichiometry with K ₁ = 4×10³ ± 150 M⁻¹. Thermodynamic parameters for both complexes have been estimated from the retention time temperature dependence. For the β-cyclodextrin complexation at 25°C ΔG ⁰ _CD is −39.7 kJ mol⁻¹ while ΔH ⁰ _CD and ΔS ⁰ _CD are −88.2 kJ mol⁻¹ and −0.16 kJ mol⁻¹ K⁻¹. For γ-cyclodextrin, the corresponding values are ΔG ⁰ _CD = −20.5 kJ mol⁻¹, ΔH ⁰ _CD = −33.5 kJ mol⁻¹ and ΔS ⁰ _CD = −0.04 kJ mol⁻¹ K⁻¹.      

Unusual reaction of 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia,primary amines and hydrazine

The nucleophilic displacement of two nitro groups in 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia, primary aliphatic amines and hydrazine leads to formation of a novel heterocyclic system, 7H-tris[1,2,5]oxadiazolo[3,4-b:3′,4′-d:3″,4″-f]azepine. The reaction of compound 1 with secondary aliphatic amines proceeds in a typical way for nitrofurazans when the nitro-group in the starting compound is substituted by RR’N-group.      

Ternary ion-association complexes between the indium(III) - 4-(2-pyridylazo)resorcinol anionic chelate and some tetrazolium cations

Complex formation and liquid-liquid extraction were studied in systems containing indium(III), 4-(2-pyridylazo)resorcinol (PAR), tetrazolium salt (TZS), water and chloroform. Two different TZS were used: 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT). The optimum conditions for extraction of In(III) as a ternary complex, (TT⁺)[In(PAR)₂] or (MTT⁺)[In(PAR)₂], were found: pH, extraction time, concentration of PAR and concentration of TZS. The constants of extraction (K_ex), constants of association (β), constants of distribution (K_D) and recovery factors (R%) were determined. The apparent molar absorptivities in chloroform were calculated to be ɛ′₅₂₀=6.6×10⁴ L mol⁻¹ cm⁻¹ and ɛ′₅₁₅=7.1×10⁴ L mol⁻¹ cm⁻¹ for the systems with TTC (I) and MTT (II), respectively. Beer’s law was obeyed for In(III) concentrations up to 3.4 μg mL⁻¹ in both the cases. The limits of detection (LOD=0.07 μg mL⁻¹ I and LOD=0.12 μg mL⁻¹ II), limits of quantification (LOQ=0.24 μg mL⁻¹ I and LOQ=0.41 μg mL⁻¹ II) and Sandell’s sensitivities (SS) were estimated as well.      

Synthesis by self-assembly and structural characterization of a new co-crystal system {[Cu(NO3)2(H2O)2]L1(NO3)2} (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) from copper nitrate and a carbene precursor

Herein, the first example of a co-crystal system formed by an imidazolium nitrate, a carbene precursor, and copper (II) nitrate, {[Cu(NO₃)₂(H₂O)₂]L1(NO₃)₂} (1) (L1 = 1,1′-dibenzyl-3,3′-butyl-diimidazolium-2,2′-diylidene) is reported. These two building blocks are connected in the solid state through hydrogen bonds to generate a three-dimensional supramolecular network.      

A novel colorimetric sensor for anions recognition based on disubstituted phenylhydrazone

Hydrazone-based receptor containing electron-withdrawing chromogenic substituents 1,10-phenanthroline-2,9-di-carboxaldehydic-(2,4-dinitrophenyl)-hydrazone (1) has been synthesized. The interaction with different anions via hydrogen bonding was demonstrated by UV-Vis absorption spectroscopy to give a purple 1:1 complexes in DMSO, whose association constant decreases in line with the following order of the studied anions (AcO⁻ > F⁻ > H₂PO₄ ⁻ > OH⁻ >>Cl⁻∼Br⁻∼I⁻). As a naked-eyes colorimetric sensor for anions, the study has a latent application importance.      

A theoretical study of the neutral and the double-charged cation of cyclo[8]pyrrole and its interaction with inorganic anions

A theoretical study of the complexation of cyclo[8]pyrrole dication, 2, and the corresponding system in neutral form, 3, with six anionic molecules has been carried out up to the B3LYP/6–311++G(2d,2p) computational level. The effect of the water solvation has been taken into account by means of the PCM method. The gas phase results correspond to the very large interaction energies expected for the interaction of molecules of opposite charge. In all the complexes, the analysis of the electron density by means of the Atoms In Molecules (AIM) methodology shows the presence of eight intermolecular interactions between the individual molecules. The results, using the water solvent model, indicate that the 2:SO₄ ²⁻ complex is more stable than the 2:NO₃ ⁻, in agreement with experimental results.      

Structure, conformation and hydrogen bonding of two amino-cycloalkanespiro-5-hydantoins

The crystal structures of 3-amino-cycloheptanespiro-4′-imidazolidine-2′,5′-dione (I) {systematic name: 3-amino-1,3-diazaspiro[4.6] undecane-2,4-dione} and 3-amino-cyclooctanespiro-4′-imidazolidine-2′,5′-dione (II) {systematic name: 3-amino-1,3-diazaspiro[4.7] dodecane-2,4-dione}, have been determined. In both compounds the polar hydantoin groups cause molecules to aggregate via N-H...O and N-H...N interactions, forming a layer structure, in which the cycloalkane rings project outwards from the central, more polar, region. The observed molecular structure is compared with that calculated by density functional theory methods.      

Spectroscopic characterization and <Emphasis Type="Italic">Ab initio</Emphasis> calculations of new diazaphosphole and diazaphosphorinane

Phosphoryl chloride is used as a starting material to synthesize new diazaphosphole, (1) and diazaphosphorinane, (2). The products are characterized by ¹H, ¹³C, ³¹P NMR, and IR spectroscopy. A high value ² J(PNH) = 17.0 Hz, 17.2 Hz is measured for two non-equivalent NH protons of endocyclic nitrogen atoms in compound 1, while it greatly decreases to 4.5 Hz in 2. Also, great amounts are obtained for two ² J(P,C) as well as two ³ J(P,C) in the ¹³C NMR spectrum of 1, but they are zero in 2. Here, the effect of ring strain and ring size on the structural and spectroscopic parameters is observed. The ³¹P NMR spectra reveal that δ(³¹P) of compound 1 is far much more downfield (12.63 ppm) relative to that of compound 2 (−10.39 ppm). Furthermore, ab initio quantum chemical calculations are performed to optimize the structures of these molecules by density functional theory (B3LYP) and Hartree-Fock (HF) methods, using the standard 6−31+G** basis set. The stabilization energies are calculated by the equation ΔE _{stabilization} = E _molecule − ΣE _i , where i = atom. To obtain the atomic hybridizations, NBO computations are made at the B3LYP/6−31+G** level. Also, by NMR calculations the ¹H, ¹³C, ³¹P chemical shifts are obtained and compared with the experimental ones.     

Thermal decomposition mechanism and quantum chemical investigation of hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO)

The thermal decomposition mechanism of hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO) compound was studied by means of differential scanning calorimetry (DSC), thermogravimetry and derivative thermogravimetry (TG-DTG), and the coupled simultaneous techniques of in situ thermolysis cell with rapid scan Fourier transform infrared spectroscopy (in situ thermolysis/RSFTIR). The thermal decomposition mechanism is proposed. The quantum chemical calculation on HNTO was carried out at B3LYP level with 6-31G+(d) basis set. The results show that HNTO has two exothermic decomposition reaction stages: nitryl group break first away from HNTO molecule, then hydrazine group break almost simultaneously away with carbonyl group, accompanying azole ring breaking in the first stage, and the reciprocity of fragments generated from the decomposition reaction is appeared in the second one. The C–N bond strength sequence in the pentabasic ring (shown in Scheme 1) can be obtained from the quantum chemical calculation as: C3–N4 > N2–C3 > N4–C5 > N1–C5. The weakest bond in NTO⁻ is N7–C3. N11–N4 bond strength is almost equal to N4–C5. The theoretic calculation is in agreement with that of the thermal decomposition experiment.      

Nanosized centers for mercury(II) ions adsorption on a surface of modified silica

The present work investigates the adsorptive interactions of Hg(II) ions in aqueous medium with hydroxylated silica, aminopropylsilica and silica chemically modified by β-cyclodextrin. Batch adsorption studies were carried out with various agitation times and mercury(II) concentrations. The maximum adsorption was observed within 15–30 min of agitation. The kinetics of the interactions, tested with the model of Lagergren for pseudo-first and pseudo-second order equations, showed better agreement with first order kinetics (k₁ = 3.4 ± 0.2 to 5.9 ± 0.3 min⁻¹). The adsorption data gave good fits with Langmuir isotherms. The results have shown that β-cyclodextrin-containing adsorbent has the largest adsorption specificity to Hg(II): K _L = 4125 ± 205 mmol⁻¹. “β-cyclodextrin-NO3-” inclusion complexes with ratio 1: 1 and super molecules with composition C₄₂H₇₀O₃₅ ⊎ 3 Hg(NO₃)₂ are formed on the surface of β-cyclodextrin-containing silica.      

Solid phase selective separation and green preconcentration of Cu, Zn, Pb and Cd in drinking water by using novel functionalized resin

A new solid — phase extraction sorbent was developed based on stepwise anchoring of two ligand molecules for the determination of copper, zinc, lead and cadmium in drinking water by flame AAS. Amberlite XAD-2 functionalized with 4′-(2-hydroxyphenylazo)-3′-methyl-1′-phenyl-2′-pyrazolin-5′-one (HPAPyr) was utilized for preconcentration/separation of these elements. The sorbent was prepared by two successive azo coupling reactions. First, 2-aminophenol was anchored to the amino groups in the resin resulted from nitration followed by reduction. Then, the resulted 2-aminophenol functionalized resin was further diazotized and coupled to the pyrazolone compound and the final product HPAPyr-XAD-2 was characterized by IR and elemental analysis. The optimum pH range for sorption, shaking time, exchange capacity, sample flow rate, preconcentration factor and interference from co-existing ions were investigated. All metal ions were quantitatively desorbed from the resin by 4.5 mol L⁻¹ nitric acid solution. The sorbent provides limit of detection within the range 0.9–3.3 μg L⁻¹ and concentration factor up to 250. The procedure was validated by analysis of certified material NIST-SRM 1577b. Application to drinking water showed satisfactory results with relative standard deviation RSD ≤ 8.5%.      

Spectrofluorometric determination of nicardipine,nifedipine and isradipine in pharmaceutical preparations and biological fluids

A simple and highly sensitive spectrofluorometric method was developed for the determination of some 1,4-dihydropyridine compounds namely, nicardipine, nifedipine and isradipine in pharmaceutical preparations and biological fluids. The method is based on the reduction of nicardipine, nifedipine and isradipine with Zn/HCl and measuring the fluorescence intensity obtained (λ_em/λ_ex) at 460/364, 450/393 and 446/360 nm, respectively. The factors affecting the development of the fluorophore and its stability were studied and optimized. The effect of some surfactants such as β-cyclodextrin (βCD), carboxymethylcelullose (CMC), sodium dodecyl sulphate (SDS) and triton X-100, on the fluorescence intensity was studied. The fluorescence intensity-concentration plots of nicardipine, nifedipine and isradipine were rectilinear over the ranges 0.4–6.0, 0.2–4.0 and 0.1–9.0 μg ml⁻¹ with detection limits of 0.0028, 0.017 and 0.016 μg ml⁻¹, respectively. The proposed method was successfully applied to commercial tablets containing the compounds; the percentage recovery agreed well with those obtained using the official methods. The method was further extended to the in vitro determination of the compounds in spiked human plasma and urine samples. A proposal of the reduction reaction pathway was postulated.      

Inclusion complexes of amlodipine besylate and cyclodextrins

In this paper the procedure for the preparation of inclusion complexes of amlodipine besylate with β-cyclodextrin (β-CD) and 2-hydrohypropyl-β-cyclodextrin (HPβ-CD) and their structural characterization was described. Molecular inclusion complexes of amlodipine besylate are prepared by the coprecipitation method and characterised by the application of spectroscopic methods FTIR, ¹H-NMR and XRD. The photosensitivity of amlodipine besylate in the inclusion complexes was also determined with respect to uncomplexed agent. DSC curves indicate the loss of the clear peak due to melting of amlodipine besylate at about 200°C, while on XR diffractograms certain reflections are lost belonging to amlodipine besylate in complexes. This indicates its inclusion in the vacancies of the host. The inclusion of amlodipine besylate with cyclodextrins increases the stability, i.e. decreases the photosensitivity of amlodipine besylate.      

Crystal structures of the dinitrate-bis-(acetylenedicarboxylate) and acetylenedicarboxylate pseudorotaxane complexes of [24-pyrimidinium crown 6]

The reaction of [24-Pyrim C6][ $ {\text{NO}}_{{\text{3}}} The reaction of [24-Pyrim C6][ ]₆ · 8H₂O with the monopotassium salt of acetylenedicarboxylic acid yielded single crystals of [24-Pyrim C6][C₄O₄]₂[]₂ · 7H₂O, (1). The compound crystallized in the triclinic space group P, with a = 9.731(8) ?, b = 10.953(9) ?, c = 14.270(14) ?, α = 108.06(7)°, β = 94.86(7)°, γ = 99.01(7)°, Z = 1, R = 0.0737, R′ = 0.1024, and 3709 independent reflections. The reaction of [24-Pyrim C6]Cl₆ with the monopotassium salt of acetylenedicarboxylic acid gives single crystals of the inclusion complex {[24-Pyrim C6][C₄O₄]₂} · []_0.92Cl_0.17[H₂C₄O₄]_0.16 · 10H₂O, (2). The compound crystallizes in the triclinic space group P, with a = 13.543(3) ?, b = 14.354(8) ?, c = 17.484(8) ?, α = 74.35(4)°, β = 79.12(3)°, γ = 69.77(3)°, Z = 2, R = 0.0976, R′ = 0.2662, and 5655 independent reflections with. Strength of binding and size of the nitrate and chloride counter ions in the reacting species determines the mode of acetylenedicarboxylate binding to the cation upon crystallization.     

Extraction-spectrophotometric investigations on two ternary ion-association complexes of gallium(III)

Complex formation and liquid-liquid extraction were studied in systems containing Ga(III), azoderivative of resorcinol {4-(2-pyridylazo)resorcinol (PAR) or 4-(2-thiazolylazo)resorcinol (TAR)}, 2,3,5-triphenyltetrazolium chloride (TTC), water and chloroform. The optimum conditions w.r.t. pH, extraction time, concentration of ADR and concentration of TTC for the extraction of Ga(III) as an ion-associate complex were found.. The composition of the extracted complexes, (TT⁺)[Ga(PAR)₂] (I), (TT⁺)[Ga(TAR)₂] (II) or (TT⁺)₂[Ga(OH)(TAR)₂] (III), and the constants of association (β) between 2,3,5-triphenyltetrazolium cation (TT⁺) with corresponding anionic chelates were established by several methods. The constants of distribution (K_D) and extraction (K_ex) of the principal species I and III were determined as well. The apparent molar absorptivities of the chloroform extract at the optimum extraction-spectrophotometric conditions were ɛ′₅₁₀=9.5×10⁴ L mol⁻¹ cm⁻¹ (I) and ɛ′₅₃₀=4.6×10⁴ L mol⁻¹ cm⁻¹ (III). The validity of Beer’s law was checked and analytical characteristics that were calculated are reported herein.      

The protection of Nifedipin from photodegradation due to complex formation with β-cyclodextrin

The inclusion complex β-cyclodextrin:nifedipin was prepared in solid state by coprecipitation with 1:1 mol ratio. The structure of the obtained complex and nifedipin was characterized by use of X-ray diffraction (XR), infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and differential scanning calorimetry (DSC) methods. The photodegradation of nifedipin and the β-cyclodextrin:nifedipin inclusion complex in solid state was monitored under natural daylight by infrared spectroscopy, whereby the free nifedipin degraded four to five times faster than the complexed nifedipin. The photodegradation products of both free and complexed nifedipin, formed during irradiation at 350 nm (with corresponding energy flux of 18 W m⁻²) were monitored by liquid chromatography during various time intervals. The speed of formation of nitroso- and nitro-phenyl derivatives by nifedipin irradiation was significantly higher than those of complexed nifedipin irradiation, which indicates its increased photostability in the inclusion complex. The effect on this property is significant because it contributes both to the improvement of the therapeutic effect of nifedipin and to the safer application thereof.      

Kinetic spectrophotometric determination of hydrazine

A kinetic spectrophotometric method for hydrazine determination in the range of 9.36×10⁻⁷ to 4.37×10⁻⁵ mol dm⁻³, based on the inhibitory effect of hydrazine on the oxidation of Victoria Blue 4- R by KBrO₃, was developed and validated. Kinetic parameters are reported for both the indicating and the inhibiting reaction. The detection limit was established as 9.98×10⁻⁸ mol dm⁻³. The selectivity of the proposed method was tested considering the influence of different ions that may be present in real samples. The method was successfully applied for hydrazine determination in various samples (very pure water from the water-steam system of a power plant and Isoniazid tablets, a pharmaceutical product).      

Methyl- and methoxysalicylatocopper complexes with 2-pyridylmethanol: Synthesis,spectral properties,structure and EPR characterization in solid-state and in solution

The syntheses and characterizations of salicylatocopper(II) complexes of the formula Cu(X-sal)₂(2-pyme)₂ (X = 3-MeO (1), 4-MeO (2), 3-Me (3), 4-Me (4) and 5-Me (5), where 3-MeOsal⁻ = 3-methoxysalicylate, 4-MeOsal⁻ = 4-methoxysalicylate, 3-Mesal⁻ = 3-methylsalicylate, 4-Mesal⁻ = 4-methylsalicylate, 5-Mesal⁻ = 5-methylsalicylate anion, and 2-pyme = 2-pyridylmethanol) are reported. The composition was determined by elemental analysis, and ligand coordination modes have been determined by spectroscopic methods (IR, UV-VIS). The crystal structure determination of [Cu(3-MeOsal)₂(2-pyme)₂] (1) and [Cu(5-Mesal)₂(2-pyme)₂] (5) have confirmed conclusions originally based on spectral data. EPR measurements of frozen water/methanol solutions containing different copper(II): 2-pyme molar ratios have indicated presence of complexes with only two nitrogen donor atoms bonded to each central atom.      

Cobalt(II) ion-selective electrode with solid contact

A new all plastic sensor for Co²⁺ ions based on 2-amino-5 (hydroxynaphtyloazo-1′)-1,3,4 thiadiazole (ATIDAN) as ionophore was prepared. The electrode exhibits a low detection limit of 1.5 × 10⁻⁶ mol L⁻¹ and almost theoretical Nernstian slope in the activity range 4.0 × 10⁻⁶–1 × 10⁻¹ mol L⁻¹ of cobalt ions. The response time of the sensor is less than 10 s and it can be used over a period of 6 months without any measurable divergence in potential. The proposed sensor shows a fairly good selectivity for Co(II) over other metal ions. The electrode was successfully applied for determination of Co²⁺ in real samples and as an indicator electrode in potentiometric titration of Co²⁺ ions with EDTA.