Effects of acetonitrile on adsorption behavior of bovine serum albumin onto synthetic calcium hydroxyapatite particles

The objective of this study was to examine the effects of acetonitrile (AN) on the adsorption behavior of bovine serum albumin (BSA) onto calcium hydroxyapatite [Ca10(PO4)6(OH)2 Ca10, Hap] materials by combining the ultraviolet (UV) and circular dichroism (CD) measurements of BSA solution. The structural change of BSA molecules with addition of AN was investigated by UV and CD spectroscopy measurements prior to studying adsorption behavior of BSA onto Hap. The CD spectra revealed that the fraction of alpha-helical content of BSA is remarkably decreased at AN concentrations above 30 vol.%, while beta-sheet content is increased. On the other hand, the percentages of random coil and turn contents were decreased only slightly. In addition to this secondary structural change of BSA, the UV spectra suggested that the tertiary structure of protein molecules was also changed by the addition of large amounts of AN; BSA molecules associate to form molecular aggregates at [AN]> or =40 vol.%. From the adsorption of BSA onto Hap particles (ca. 30 nm in the particle length) from a water-AN mixed solution, it was revealed that the adsorption behavior of BSA strongly depends on the change of secondary and tertiary structures of BSA by addition of AN. The contraction of BSA molecules at low AN concentrations (10-20 vol.%) gave their small cross-sectional area, providing a large amount of adsorption (n(BSA)), although n(BSA) was decreased above 30 vol.% AN by enlargement of BSA molecules with solvation and unfolding some alpha-helix domains. The n(BSA) values of the systems with AN exhibited a maximum; n(BSA) was increased at a lower BSA concentration region, although it was decreased at a higher BSA concentration due to self-association. Accompanying the change of n(BSA) with AN addition, the maxima of electrophoretic mobility (em) of the Hap particles were observed for the systems with AN, although the em of Hap particles was normally increased and saturated with increase in protein coverage for the native structure on the system without AN. On the other hand, because the aggregated BSA molecules could be cooperatively bound, the adsorption of BSA onto the Hap particles with large size (108 nm in the particle length) was enhanced in the presence of AN.     

Microcalorimetric study of protein adsorption onto calcium hydroxyapatites

To clarify the adsorption mechanism of proteins onto calcium hydroxyapatite (Hap), the present study measured adsorption (DeltaHads) and desorption (DeltaHdes) enthalpies of bovine serum albumin (BSA; isoelectric point (iep) 4.7, molecular mass (Ms) 67,200 Da, acidic protein), myoglobin (MGB; iep=7.0, Ms=17,800 Da, neutral protein), and lysozyme (LSZ; iep=11.1, Ms=14,600 Da, basic protein) onto Hap by a flow microcalorimeter (FMC). Five kinds of large platelike particles of CaHPO4.2H2O (DCPD) after hydrolyzing at room temperature with different concentrations of NaOH aqueous solution ([NaOH]) for 1 h were used. DCPD converted completely to Hap after treatment at [NaOH]>or=2%, and the crystallinity of Hap was increased with an increase in [NaOH] up to 10%. The amounts of protein adsorbed (Deltanads) and desorbed (Deltandes) were measured simultaneously by monitoring the protein concentration downstream from the FMC with a UV detector. The Deltanads values were also measured statically by a batch method in each system. The Deltanads values measured by the FMC and static measurements fairly agreed with each other. Results revealed that DeltaHBSAads was decreased with an increase in [NaOH]; in other words, DeltaHBSAads was decreased with the improvement of Hap's crystallinity, suggesting that the BSA adsorption readily proceeded onto Hap. This fact indicated a high affinity of Hap to protein. This affinity was further recognized by DeltaHBSAdes because its positive value was increased by increasing [NaOH]. These opposite tendencies in DeltaHBSAads and DeltaHBSAdes revealed that Hap possessed a high adsorption affinity to BSA (i.e., enthalpy facilitated protein adsorption but hindered its desorption). The fraction of BSA desorption was also decreased with an increase in [NaOH], confirming the high affinity of Hap to protein. Similar results were observed on the LSZ system, though the enthalpy values were smaller than those of BSA. In the case of neutral MGB, DeltaHBSAads also exhibited results similar to those of the BSA and LSZ systems. However, due to its weak adsorption by the van der Waals force, DeltaHBSAdes was small and almost zero at [NaOH]>or=2%. Hence, the fraction of MGB desorption was less dependent on [NaOH].     

Synthesis of phosphate-type fluorocarbon-hydrocarbon hybrid surfactants and their adsorption onto calcium hydroxyapatite

Five novel phosphate-type hybrid surfactants, C_mF_2m+1C₆H₄CH[OPO₂(OC₆H₅)Na]C_nH_2n+1 (FmPHnPPhNa: m = 4, 6, 8; n = 3, 5; C₆H₄ = p-phenylene, C₆H₅ = phenyl), have been synthesized. When compared with sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (C₆H₄ = p-phenylene), the new hybrid surfactants are found to have comparable abilities to lower surface tension of water. The critical micelle concentrations of FmPHnPPhNa follow Klevens rule and their occupied areas per molecule increase with increasing m and n. Calcium hydroxyapatite (CaHAp) pellets modified with FmPH3PPhNa gives high hydrophobic and lipophobic surfaces. The hybrid surfactants are expected as new dental reagents for oral hygiene.     

Synthesis of phosphate-type fluorocarbon-hydrocarbon hybrid surfactants and their adsorption onto calcium hydroxyapatite

Five novel phosphate-type hybrid surfactants, C_mF_2m+1C₆H₄CH[OPO₂(OC₆H₅)Na]C_nH_2n+1 (FmPHnPPhNa: m = 4, 6, 8; n = 3, 5), have been synthesized. When compared with sulfate-type hybrid surfactants, C_mF_2m+1C₆H₄CH(OSO₃Na)C_nH_2n+1 (C₆H₄ = p-phenylene), the new hybrid surfactants were found to have comparable abilities to lower the surface tension of water. The critical micelle concentrations of FmPHnPPhNa followed Klevens’ rule and their occupied areas per molecule increased with increasing m and n. Calcium hydroxyapatite (CaHAp) pellets modified with FmPH3PPhNa gave high hydro and lipophobic surfaces. The hybrid surfactants are expected to be useful as new dental reagents for oral hygiene.     

Protein adsorption behaviors onto photocatalytic Ti(IV)-doped calcium hydroxyapatite particles

The fundamental experiments on the adsorption behaviors of proteins onto photocatalytic Ti(4+)-doped calcium hydroxyapatite (TiHap) particles were examined comparing to those onto the calcium hydroxyapatite (CaHap) and commercially available typical titanium oxide (TiO(2)) photocatalyst (TKP-101). The heat treated TiHap and CaHap particles were also used after treated these particles at 650°C for 1h (abbreviated as TiHap650 and CaHap650, respectively). All the adsorption isotherms of bovine serum albumin (BSA), myoglobin (MGB) and lysozyme (LSZ) from 1×10(-4)mol/dm(3) KCl solution were the Langmuirian type. The saturated amounts of adsorbed BSA (n(s)(BSA)) for the CaHap650 particles was higher than that for CaHap. Similar results were observed for TiHap and TiHap650. The adsorption of LSZ exhibited the same result of BSA, while the saturated amounts of adsorbed LSZ (n(s)(LSZ)) value on the TiHap were much higher than CaHap. However, the saturated amounts of adsorbed MGB (n(s)(MGB)) are almost equal to those for the CaHap and TiHap nevertheless whether these particles were heat treated at 650°C or not. The TKP-101 exhibited extremely small adsorption capacity of all proteins due to its small particle size of ca. 4nm in diameter. The independence of the n(s)(MGB) value on the zeta potential (zp) of the particles was explained by the electrostatical neutrality of MGB molecules. On the other hand, the n(s)(LSZ) values were increased with increase in the negative zp of the particles. This fact was explained by increasing the electrostatic attractive forces between negatively charged particles and positively charged LSZ. However, the n(s)(BSA) values exhibit maxima for the heat treated TiHap650 and CaHap650 particles. This result was interpreted to the formation of β-TCP crystal phase by the heat treatment. The produced Ca(2+) ions by dissolution from β-TCP phase may exert as binders between BSA and surfaces of the heat treated particles.     

Adsorption of immunogamma globulin onto various synthetic calcium hydroxyapatite particles

This paper presents data on adsorption of immunogamma globulin (IgG) onto synthetic rodlike calcium hydroxyapatite particles (CaHaps) with various particle lengths and calcium/phosphate (Ca/P) atomic ratios ranging from 1.54 to 1.65 and compares the obtained results to those of acidic (bovine serum albumin, BSA), neutral (myoglobin, MGB), and basic (lysozyme, LSZ) proteins reported before. The effect of electrolyte concentration on IgG adsorption was also examined. The initial rate of IgG adsorption was similar to that of BSA and was slower than that of MGB and LSZ. This fact was interpreted by the difference in the structural stability and molecular weight of these proteins. The isotherms of IgG adsorption onto the CaHap particles were of pseudo-Langmuir type. The saturated amount of adsorbed IgG values (nsIgG) for the particles with mean particle length less than 70 nm decreased with increasing Ca/P ratio. The adsorption behavior of IgG molecules was very similar to that of basic LSZ, though IgG has zero net charge. The nsIgG value was increased with increased mean particle length of CaHaps; the relationship was less significant than that for BSA but similar to those for MGB and LSZ. The similar adsorption behavior of IgG and LSZ suggested that the Fab parts of IgG molecules preferentially adsorb onto CaHap to provide the reversed Y-shaped conformation of IgG. The change of the adsorption mode of IgG molecules from the reversed Y-shaped conformation to side-on by "spreading" the Fc part of IgG molecules onto the particle surface over a longer adsorption time was suggested. The nsIgG value was increased with increasing electrolyte concentration by screening the intra- and intermolecular electrostatic interactions of proteins.     

Removal of Reactive Yellow 84 from aqueous solutions by adsorption onto hydroxyapatite

The adsorption of a reactive dye, Reactive Yellow 84, from aqueous solution onto synthesized hydroxyapatite was investigated. The experiments were carried out to investigate the factors that influence the dye uptake by the adsorbent, such as the contact time under agitation, absorbent dosage, initial dye concentration, temperature and pH of dye solution. The experimental results show that the amount of dye adsorbed increases with an increase in the amount of hydroxyapatite. The maximum adsorption occurred at the pH value of 5. The equilibrium uptake was increased with an increase in the initial dye concentration in solution. The experimental isotherm data were analyzed using Langmuir isotherm equation. The maximum monolayer adsorption capacity was 50.25 mg/g. The adsorption has a low temperature dependency and was endothermic in nature with an enthalpy of adsorption of 2.17 kJ mol⁻¹.     

Simultaneous adsorption of copper ions and humic acid onto an activated carbon

In this study, simultaneous adsorption of copper ions and humic acid (HA) from Aldrich onto an activated carbon is investigated. It is found that the HA adsorption in the absence of copper decreases as the pH is increased. It leads to a reduction of 34.7% in the specific surface area of carbon. There exists a critical concentration (CC) of HA for copper adsorption. At HA concentrations < CC, a decrease in copper adsorption is observed; however, the HA improves the adsorption at HA concentrations > CC. An increase in ionic strength can enhance the copper uptake; however, zinc and/or cobalt ions have an insignificant influence on copper adsorption. The adsorption is significantly increased by citric acid, whereas addition of EDTA slightly decreases the uptake. An intraparticle diffusion model is successfully used to describe the copper adsorption kinetics.     

Crystal structure and composition of hydroxyapatite biocomposites prepared at excess of calcium ions

Formation of composites by calcium phosphates with chondroitin sulfate and gelatin obtained at excess content of calcium ion in solution is studied by the methods of X-ray phase analysis, IR spectroscopy and electron microscopy. Inclusion to the crystals of hydroxyapatite as the main phase and the absence of chemical interaction of biopolymers with calcium phosphate is proved and some features of the effect of reagents addition order to the studied system calcium-ammonium hydrogen phosphate-organic component are elucidated.     

Film and intraparticle mass transfer during the adsorption of metal ions onto bone char

The sorption of three metal ions, namely, copper, cadmium, and zinc, onto bone char has been studied in terms of equilibrium and rate studies. Equilibrium studies have been analyzed using the Langmuir isotherm equation and the maximum sorption capacities for the metals were 0.477, 0.709, and 0.505 mmolg(-1) bone char for cadmium, copper, and zinc ions, respectively. The kinetic experimental data were used to analyze the effect of external film boundary layer and intraparticle mass transfer resistance on the sorption process and its significance. Four methods of determining the external film transport coefficient were developed and tested; three utilized experimental data to obtain the coefficient and the fourth method was completely empirical. The three experimentally based models give very similar results and consequently similar values of the deviation error values, whereas the error values for the empirical correlation were greater than these three values. The results also demonstrated that the methods for determining the film coefficient could be integrated into more complex diffusion-transport models such as film-intraparticle diffusion processes.     

Properties of protein adsorption onto pore surface during microfiltration: Effects of solution environment and membrane hydrophobicity

Properties of bovine serum albumin (BSA) adsorption onto pore surface during the filtration of BSA containing solution with the Sirasu porous glass membrane with a pore size of 0.1 μm were studied. The effects of pH, ionic strength, and surface modification on the flux decline and breakthrough curves were observed. The adsorption properties of BSA were estimated quantitatively by using the internal fouling model, which relates the filtration performance to the adsorption interaction, the adsorption capacity, and the thickness of the adsorption layer. The electrostatic interaction between BSA and pore surface was estimated by the streaming potential measurement. The BSA adsorption involved a rapid adsorption in the early stage of filtration followed by a slow multilayer adsorption that dominates the long-term filtration performance. The electrostatic repulsive force reduced the overall adsorption interaction but the electrostatic attractive force did not affect the adsorption interaction. The effect of ionic strength on the BSA adsorption could be explained in terms of the shift of the IEP of BSA toward lower pH with the increase in ionic strength. The hydrophobicity of membrane did not affect the adsorption properties except for the adsorption interaction in the early stage of the filtration.     

Sorption of tartrate ions to lanthanum (III)-modified calcium fluor- and hydroxyapatite

The present article details the formation of lanthanum-modified apatites and the binding process of tartrate ions with these obtained apatites. Chemical analyses, FT-IR and (31)P NMR spectroscopies, XRD powder, TGA, and TEM analyses were employed for studying the reaction between Ca(10)(PO(4))(6)(OH)(2) (HAp) or Ca(10)(PO(4))(6)(F)(2) (FAp) and LaCl(3). The reaction was found to take place mainly through partial dissolution of the apatite followed by precipitation of a new phase containing lanthanum phosphate. When La(3+) was introduced in the presence of L(+)-tartaric acid (TAH(2)), no fundamental changes were observed in the HAp or FAp structures. However, there did occur a formation of a new phase of Ca or/and La tartrate salt.     

A comparison of the adsorption of saliva proteins and some typical proteins onto the surface of hydroxyapatite

Adsorption of protein from saliva on hydroxyapatite was compared with adsorption of several typical proteins with different electric charges, i.e. lysozyme, human serum albumin, β-lactoglobulin and ovalbumin. Adsorbed amounts of these proteins were determined and electrophoretic mobilities of protein-covered hydroxyapatite particles were measured, at different values for the adsorbed mass and, therefore, at various degrees of surface coverage. Also, adsorption kinetics were investigated by streaming potential measurements of a hydroxyapatite surface in contact with a protein solution, allowing monitoring of changes in the zeta-potential of the protein-covered hydroxyapatite surface in real time. The adsorbed amounts show that, as compared to most of the other proteins, the saliva proteins have remarkably low adsorption affinity. The measured values for the electrophoretic mobilities indicate that the positively charged proteins in the saliva mixture preferentially adsorb onto the negatively charged hydroxyapatite surface; this is most pronounced at low protein concentration in solution (i.e. at low coverage of the surface by the protein). Preferential uptake of the positively charged saliva proteins during the initial stages of the adsorption process is also concluded from the results of the kinetics experiments. Preferential adsorption of positive proteins is somewhat suppressed by the presence of Ca²⁺ ions in the medium. The results suggest that an acquired pellicle on a tooth in an oral environment contains a significant fraction of positively charged proteins. The positively charged proteins in the pellicle reduce the zeta-potential at the tooth surface to low values; consequently, electrostatic forces are expected to play only a minor role in the interaction with other components (e.g. bacterial cells).     

油页岩飞灰对重金属离子的吸附动力学及热力学

采用批式振荡吸附法研究了燃油页岩电厂循环流化床锅炉飞灰对重金属离子Pb²+、Cu²+、Zn²+、Cd²+的吸附动力学及吸附热力学特性,并提出了吸附机理。结果表明,油页岩飞灰对Pb²+、Cu²+、Zn²+、Cd²+的吸附平衡数据符合Langmuir和Freundlich吸附等温方程,但Freundlich方程能够更好地描述吸附等温线。在油页岩飞灰对重金属离子吸附的初始阶段,拉格朗日准一级动力学方程、准二级动力学方程、Elovich方程、粒子内扩散模型均能很好地反映吸附模式,而整个吸附过程则遵循二级反应动力学方程,其吸附过程是液膜扩散和粒子内扩散共同作用的结果。油页岩飞灰对Pb²+、Cu²+、Zn²+、Cd²+的吸附是吸热反应。     

Removal of phosphate from solution by adsorption and precipitation of calcium phosphate onto monohydrocalcite

The sorption behavior and mechanism of phosphate on monohydrocalcite (CaCO₃?H₂O: MHC) were examined using batch sorption experiments as a function of phosphate concentrations, ionic strengths, temperatures, and reaction times. The mode of PO₄ sorption is divisible into three processes depending on the phosphate loading. At low phosphate concentrations, phosphate is removed by coprecipitation of phosphate during the transformation of MHC to calcite. The sorption mode at the low-to-moderate phosphate concentrations is most likely an adsorption process because the sorption isotherm at the conditions can be fitted reasonably with the Langmuir equation. The rapid sorption kinetics at the conditions is also consistent with the adsorption reaction. The adsorption of phosphate on MHC depends strongly on ionic strength, but slightly on temperature. The maximum adsorption capacities of MHC obtained from the regression of the experimental data to the Langmuir equation are higher than those reported for stable calcium carbonate (calcite or aragonite) in any conditions. At high phosphate concentrations, the amount of sorption deviates from the Langmuir isotherm, which can fit the low-to-moderate phosphate concentrations. Speciation–saturation analyses of the reacted solutions at the conditions indicated that the solution compositions which deviate from the Langmuir equation are supersaturated with respect to a certain calcium phosphate. The obtained calcium phosphate is most likely amorphous calcium phosphate (Ca₃(PO₄)₂?xH₂O). The formation of the calcium phosphate depends strongly on ionic strength, temperature, and reaction times. The solubility of MHC is higher than calcite and aragonite because of its metastability. Therefore, the higher solubility of MHC facilitates the formation of the calcium phosphates more than with calcite and aragonite.     

The adsorption of fluoride containing polyelectrolytes on hydroxyapatite

In this study the preparation of three polyvinylpyridinium fluorides with different hexadecyl group contents is described. Their adsorption on hydroxyapatite (the main constituent of dental enamel) was studied as a function of time and concentration. It was found that increasing hexadecyl group content resulted in lower amounts of adsorbed polymer. The adsorption of the polyelectrolytes is accompanied with the uptake of fluoride by hydroxyapatite at a higher rate and with greater amounts. Phosphate ions present in aqueous suspensions of hydroxyapatite were responsible for this phenomenon. Desorption experiments showed that the adsorption of these macromolecules was irreversible in water. Excess calcium resulted to some extent in desorption.     

Mechanistic model for adsorption of immunoglobulin on hydroxyapatite

A model is developed for correlating the adsorption of protein to hydroxyapatite in terms of pH, phosphate and imidazole. It provides a basis for manipulating the chromatography conditions so as to obtain the best possible fractionation. The adsorption mechanism is apparently a function of two calcium affinity interactions and cation exchange. We used immunoglobulins and a fusion protein with or without a poly(6)histidine tag for our investigation. The results are presented and discussed in the present study.     

Sorption of aqueous palladium onto synthetic hydroxyapatite

The sorption of Pd(II) on hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂) has been studied at 25 °C as a function of pH, in 0.01 M NaClO₄, and 0.01 and 0.025 M Ca(ClO₄)₂ aqueous background electrolytes and Pd(II) concentration (9.3 to 47 ??M), trying to minimize some types of reactions, such as solid dissolution of and metal precipitation. The radiotracer palladium, ¹⁰⁹Pd, obtained by neutron irradiation, has been used to calculate the palladium??s distribution coefficients K _d between aqueous and solid phase. A mathematical treatment of results has been made by ion-exchange theory in order to interpret palladium sorption onto treated solid. For this, we take into account the existence of active sites at the hydroxyapatite surface, and the aqueous solution chemistry of palladium as well as the effect of phosphate anions from solid dissolution. The results can be explained as evidence of sorption of the species PdOH⁺, and of a mixed hydroxo complex of Pd²⁺ like (XCaO^?)?CPdOH⁺·nH₂O fixed onto {??Ca?COH} surface sites of the hydroxyapatite.