Synthesis and polymerization reactions of cyclic imino ethers. VI. Polymers with biphenyl structure

A monomer of the AB‐type and a bifunctional comonomer of the AA‐type containing two 2‐oxazoline rings and a biphenyl structural unit were prepared from the corresponding carboxylic acids via their esterification and subsequent amidation with an aminoalcohol. The cyclization of an amide to 2‐oxazoline structure was achieved by treatment with thionyl chloride followed by liberation of the free base with sodium hydrocarbonate in an aqueous solution. The prepared monomers were used for the polyaddition polymerization of the AB‐type monomer having a 2‐oxazoline and phenol group bound on adjacent rings of the biphenyl structure in solution. The monomer of the AA‐type was used for AA+BB‐type polyaddition reactions with aliphatic dicarboxylic acids. Both types of polymerizations have been performed in melt and in solution. The structures of the polymers were determined, and the thermal properties of the polymers were evaluated. Liquid‐crystalline (LC) structures of the prepared polymers were observed by DSC measurements and optical microscopy. The polyaddition reactions of the monomers containing a 2‐oxazoline ring and a biphenyl unit represent a new efficient way for the preparation of a biphenyl unit containing poly(ether amide)s and poly(ester amide)s. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of gradient copolymers via ATRP in miniemulsion. II. Forced gradient

A series of forced gradient copolymers with different controlled distribution of monomer units along the copolymer backbone were successfully prepared by atom transfer radical polymerization in miniemulsion. The newly developed initiation technique, known as activators generated by electron transfer, was beneficial for forced gradient copolymers preparation because all polymer chains were initiated within the miniemulsion droplets and the miniemulsion remained stable throughout the entire polymerization. Various monomer pairs with different reactivity ratios were examined in this study, including n‐butyl acrylate/t‐butyl acrylate, n‐butyl methacrylate/methyl methacrylate, and n‐butyl acrylate/styrene. In each case, the added monomer diffused across the aqueous suspending medium and gradient copolymers with different forced distributions of comonomer units along the polymer backbone were obtained. The shape of the gradient along the backbone of the copolymers was influenced by the molar ratio of the monomers, the reactivity ratio of the comonomers as well as the feeding rate. The shape of the gradient was also affected by the relative hydrophobicities of the comonomers. Copolymerizations exhibited good control for all feeding rates and comonomer feeding ratios, as evidenced by narrow molecular weight distribution (M_w/M_n = 1.20–1.40) and molecular weight increasing smoothly with polymer yield, indicating high initiation efficiency. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1413–1423, 2007     

Synthesis and polymerization reactions of cyclic imino ethers. I. Ring‐opening homopolyaddition of AB‐type hydroxyphenyl‐substituted 2‐oxazolines

Homopolyaddition reactions of AB‐type monomers containing a 2‐oxazoline and a phenol group in different positions of the phenyl ring, namely, 2‐(4‐hydroxyphenyl)‐2‐oxazoline, 2‐(3‐hydroxyphenyl)‐2‐oxazoline, 2‐(2‐hydroxyphenyl)‐2‐oxazoline, and 2‐(4‐hydroxyphenyl)‐4,4‐dimethyl‐2‐oxazoline, were studied. Except for 2‐(4‐hydroxyphenyl)‐4,4‐dimethyl‐2‐oxazoline, the reaction carried out in bulk or a solution of highly boiling solvents resulted in the formation of poly(ether amide)s with molecular weights in the range of 10³ to 10⁴ as measured by vapor pressure osmometry and gel permeation chromatography. A mechanism of the growth reaction, including a nucleophilic attack of a phenol group to a 2‐oxazoline ring in the 5‐position, was suggested. The polymerization was accompanied by a side reaction of the amido groups formed by the primary reaction of the 2‐oxazoline ring. This led to branching of the main chain. The thermal properties of the prepared polymers were evaluated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 343–355, 2006     

Mimicking Ziegler‐Natta Catalysts in Homogeneous Phase, 1. C2‐Symmetric Octahedral Zr(IV) Complexes with Tetradentate [ONNO]‐Type Ligands

Results of propene polymerization in the presence of two known octahedral C₂‐symmetric Zr complexes bearing tetradentate [ONNO]‐type ligands are reported for the first time. Depending on the steric hindrance at the active metal, isotactic site‐controlled or weakly syndiotactic chain‐end‐controlled polymers were obtained, in both cases via highly regioselective 1,2 (primary) monomer insertion. In this respect, the complexes mimic the behavior of the active Ti species on the surface of the heterogeneous Ziegler‐Natta catalysts of which they might represent good structural models.     

Trends in Kinetic Behavior during Ester-Ester Exchange Reactions in Polyesters by Mass Spectrometry. I

The kinetics of the ester-ester exchange reaction between polyesters from adipic acid and various linear and branched glycols were investigated by mass spectometry using the dimer analysis method (DAM). Rate constants, activation energies, and frequency factors are given for reactions studied in the temperature range of 572–585 K. Correlation of glycol methylene ratios with activation energies and frequency factors shows an alternating trend in kinetic behavior. Reaction systems containing even numbers of methylene groups in the glycol moiety of the reactants exhibited slower reaction rates than systems with odd numbers of methylene groups, while branched reaction systems followed very similar trends when the influence of pendant groups is ignored.     

Concentration effects in the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide

The monomer concentration for the cationic ring‐opening polymerization of 2‐ethyl‐2‐oxazoline in N,N‐dimethylacetamide was optimized utilizing high‐throughput experimentation methods. Detailed ¹H‐NMR spectroscopic investigations were performed to understand the mechanistic aspects of the observed concentration effects. Finally, the improved polymerization concentration was applied for the synthesis of higher molecular weight (> 10,000 Da) poly(2‐ethyl‐2‐oxazoline)s. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1487–1497, 2005     

Hydrogen effects in propylene polymerization reactions with titanium‐based Ziegler–Natta catalysts. I. Chemical mechanism of catalyst activation

The hydrogen activation effect in propylene polymerization reactions with Ti‐based Ziegler–Natta catalysts is usually explained by hydrogenolysis of dormant active centers formed after secondary insertion of a propylene molecule into the growing polymer chain. This article proposes a different mechanism for the hydrogen activation effect due to hydrogenolysis of the Ti? iso‐C₃H₇ group. This group can be formed in two reactions: (1) after secondary propylene insertion into the Ti? H bond (which is generated after β‐hydrogen elimination in the growing polymer chain or after chain transfer with hydrogen), and (2) in the chain transfer with propylene if a propylene molecule is coordinated to the Ti atom in the secondary orientation. The Ti? CH(CH₃)₂ species is relatively stable, possibly because of the β‐agostic interaction between the H atom of one of its CH₃ groups and the Ti atom. The validity of this mechanism was demonstrated in a gas chromatography study of oligomers formed in ethylene/α‐olefin copolymerization reactions with δ‐TiCl₃/AlEt₃ and TiCl₄/dibutyl phthalate/MgCl₂–AlEt₃ catalysts. A quantitative analysis of gas chromatography data for ethylene/propylene co‐oligomers showed that the probability of secondary propylene insertion into the Ti? H bond was only 3–4 times lower than the probability of primary insertion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1353–1365, 2002     

Nitroxide‐mediated radical copolymerization of methyl methacrylate controlled with a minimal amount of 9‐(4‐vinylbenzyl)‐9H‐carbazole

The controlled nitroxide‐mediated homopolymerization of 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) and the copolymerization of methyl methacrylate (MMA) with varying amounts of VBK were accomplished by using 10 mol % {tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino} nitroxide relative to 2‐({tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino}oxy)‐2‐methylpropionic acid (BlocBuilder?) in dimethylformamide at temperatures from 80 to 125 °C. As little as 1 mol % of VBK in the feed was required to obtain a controlled copolymerization of an MMA/VBK mixture, resulting in a linear increase in molecular weight versus conversion with a narrow molecular weight distribution (M_w /M_n ≈ 1.3). Preferential incorporation of VBK into the copolymer was indicated by the MMA/VBK reactivity ratios determined: r_VBK = 2.7 ± 1.5 and r_MMA = 0.24 ± 0.14. The copolymers were found significantly “living” by performing subsequent chain extensions with a fresh batch of VBK and by ³¹P NMR spectroscopy analysis. VBK was found to be an effective controlling comonomer for NMP of MMA, and such low levels of VBK comonomer ensured transparency in the final copolymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Block and random copolymers as surfactants for dispersion polymerization. I. Synthesis via atom transfer radical polymerization and ring‐opening polymerization

Atom transfer radical polymerization (ATRP) and ring‐opening polymerization (ROP) were combined to synthesize poly(?‐caprolactone‐co‐octadecyl methacrylate‐co‐dimethylaminoethyl methacrylate) copolymers possessing a triblock or random block structure. Various synthetic pathways (sequential or simultaneous approaches) were investigated for the synthesis of both copolymers. For the preparation of these copolymers, an initiator with dual functionality for ATRP/anionic ring‐opening polymerization, 2‐hydroxyethyl 2‐bromoisobutyrate, was used. Copolymers were prepared with good structural control and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.2), but one limitation was identified: the dimethylaminoethyl methacrylate (DMAEMA) block had to be synthesized after the ?‐caprolactone block. ROP could not proceed in the presence of DMAEMA because the complexation of the amine groups in poly(dimethylaminoethyl methacrylate) deactivated tin(II) hexanoate, which was used as a catalyst for ROP. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1498–1510, 2005     

Quasiliving Carbocationic Polymerization. X. Molecular Weight Averages and Polydispersity

In quasiliving polymerizations with reversible chain transfer (QL_0R systems), polymers with narrow molecular weight distribution can be obtained, It has been shown that while in true living systems (L₀₀) R = 1, and in quasiliving systems with irreversible chain transfer (QL₀₁) R = 2 is the limiting value of polydispersity, in QL_0R systems r = 4/3 is the polydispersity to which the distribution of the polymer tends with increasing polymerization time. This limit is independent of the rate of reinitiation; the course of the R vs t curves is, however, determined by the various rate constants.     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. II. Living nature of growing end and side reactions

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the HCl–vinyl ether adduct/SnCl₄/n‐Bu₄NCl initiating system induced living cationic polymerization of isobutyl vinyl ether in CH₂Cl₂ at ?78 °C, that is, the well‐resolved spectra demonstrated that the produced polymers consist of only one series of polymers carrying one initiator fragment at the α end and one methoxy group originated from quenching with methanol at the ω end. The polymer molecular weight as well as the terminal structure were unchanged even when the reaction mixtures were kept unquenched at ?78 °C for an interval of more than five times longer than the reaction period after complete consumption of monomer, which indicates the long lifetime of the living end even under such starved conditions. In contrast, the polymers obtained at a higher temperature, ?15 °C, showed an additional minor series of polymers formed via proton initiation, originating from adventitious water. Under the starved conditions, other side reactions occurred to generate minor series of polymers with an aldehyde ω end or a diisobutyl acetal ω end. Rather surprisingly, however, unsaturated C?C end groups were not detected, which means the absence of β‐proton elimination under these conditions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1249–1257, 2001     

Living radical polymerization. II. Improved atom transfer radical polymerization of acrylamide in aqueous glycerol media with a novel pentamethyldiethylenetriamine‐based soluble copper(I) complex catalyst system

An improved atom transfer radical polymerization (ATRP) of acrylamide was achieved in a glycerol/water (1:1 v/v) medium with 2‐halopropionamide initiators, CuX (X = Cl or Br) as catalysts, pentamethyldiethylenetriamine (PMDETA) as a ligand, and CuX₂ (≥20 mol % CuX) and excess alkali halide (ca. 1 mol/dm³) as additives. The first‐order kinetic plots for the disappearance of the monomer at 130 °C were linear; this was a significant improvement over the results obtained earlier with the bipyridine ligand. However, even under such improved situations, about 7 mol % of the polymer chains were estimated to be formed dead. The polydispersity index was approximately 1.5. At a lower temperature (ca. 90 °C), a lower polydispersity index (1.24) was obtained for the bromide‐based initiating system. Chain‐extension experiments proved the living nature of the polymers. The presence of both extra halide ions and the monomer was necessary to take the CuX–PMDETA complex into solution. It was suggested that the soluble Cu(I) complex was formed with one PMDETA molecule acting as a monodentate ligand and with two halide ions and one acrylamide molecule occupying the other three coordination sites. Some support for the involvement of all three ligands (X^?, PMDETA, and acrylamide) in the complex formation was obtained from ultraviolet–visible spectroscopy studies. The better ATRP with the PMDETA ligand was attributed to the better stability and lesser hydrolysis of the 1:1 Cu⁺²/PMDETA complex with respect the corresponding bipyridine complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2483–2494, 2004     

A new insight into the mechanism of 1,3‐dienes cationic polymerization. II. Structure of poly(1,3‐pentadiene) synthesized with tBuCl/TiCl4 initiating system

The microstructure of poly(1,3‐pentadiene) synthesized by cationic polymerization of 1,3‐pentadiene with ^tBuCl/TiCl₄ initiating system is analyzed using one‐dimensional‐ and two‐dimensional‐NMR spectroscopy. It is shown that unsaturated part of chain contains only homo and mixed dyads with trans?1,4‐, trans?1,2‐, and cis?1,2‐structures with regular and inverse (head‐to‐head or tail‐to‐tail) enchainment, whereas cis?1,4‐ and 3,4‐units are totally absent. The new quantitative method for the calculation of content of different structural units in poly(1,3‐pentadiene)s based on the comparison of methyl region of ¹³C NMR spectra of original and hydrogenated polymer is proposed. The signals of tert‐butyl head and chloromethyl end groups are identified in a structure of poly(1,3‐pentadiene) chain and the new approaches for the quantitative calculation of number‐average functionality at the α‐ and ω‐end are proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3297–3307     

Kinetic study on the living/controlled cationic polymerization of p‐methoxystyrene coinitiated by tris(pentafluorophenyl)borane

A kinetic study of the living cationic polymerization of p‐methoxystyrene using 1‐(4‐methoxyphenyl)ethanol ( 1 )/B(C₆F₅)₃ initiating system in a mixture of CH₃CN with CH₂Cl₂ 1:1 (v/v) at room temperature was carried out utilizing a wide variety of conditions. The polymerization proceeded in a living fashion even in the presence of a large amount of water ([H₂O]/[B(C₆F₅)₃] ratio up to 20) to afford polymers whose M_n increased in direct proportion to monomer conversion with fairly narrow MWDs (M_w/M_n ≤ 1.3). The investigation revealed that the rate of polymerization was first‐order in B(C₆F₅)₃ concentration, while a negative order in H₂O concentration close to ?2 was obtained. It was also found that the rate of polymerization decreased with lowering temperature, which could be attributed to a decreased concentration in free Lewis acid, the true coinitiator of polymerization. A mechanistic scheme to explain the kinetic behavior of living p‐methoxystyrene polymerization is proposed, which has been validated by PREDICI simulation on multiple‐data curves obtained by ¹H NMR in situ polymerization experiment. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6928–6939, 2008     

Photoinitiators with functional groups. VI. Chemically bound sensitizers

Several benzophenone‐ and thioxanthone‐based photosensitizers (PSs) were covalently bonded to hydroxyalkylphenone‐ and aminoalkylphenone‐based photoinitiators (PIs) to enhance the rate of the excitation‐transfer effect due to the close vicinity of the PS to the PI. The properties of these new systems were investigated with UV spectroscopy and photo‐differential scanning calorimetry. Broadband irradiation experiments and selective excitation of the PS were carried out for the physical mixtures and covalently bonded PI/PS combinations to investigate the effect of excitation transfer. Selective excitation of the PS chromophore revealed that the energy transfer was significantly increased in covalently bonded initiators in comparison with the physical mixtures. This effect was most pronounced for the hydroxyalkylphenones that were sensitized by suitable benzophenone derivatives, especially at low PI concentrations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2285–2301, 2004     

MALDI‐TOF‐MS analysis of living cationic polymerization of vinyl ethers. III. Polymerization with SnCl4 and TiCl4 in the absence of additives

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analysis revealed that the precision control (or the living nature) of the cationic polymerization of vinyl ethers with SnCl₄ or TiCl₄ critically depends on the Lewis acid concentration and temperature. Specifically, at an extremely low Lewis acid concentration, for example, the polymerization with the HCl–vinyl ether adduct (an initiator) is living at ?78 °C in CH₂Cl₂ solvent, whereas side reactions occurred at a higher concentration of SnCl₄ or at a higher temperature, ?15 °C. This was more pronounced with SnCl₄ than with TiCl₄, which was due to a stronger Lewis acidity of SnCl₄ as suggested by NMR analysis of the model reactions. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1258–1267, 2001     

Spontaneous Cu(I)Br–PMDETA‐mediated polymerization of isobornyl methacrylate in heterogeneous aqueous medium at ambient temperature

Isobornyl methacrylate (IBMA), a bulky hydrophobic methacrylate, undergoes very fast polymerization, in bulk, with Cu(I)Br/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA)/ethyl‐2‐bromoisobutyrate system, at ambient temperature. IBMA also undergoes a spontaneous initiator‐free polymerization, at ambient temperature, with Cu(I)Br/PMDETA catalytic system in dimethyl sulfoxide–water mixtures. The rate of the polymerization is seen to increase with the water content up to 80 mol % of water. A possible intervention of air in initiation is proposed. The active Cu(0) formed by the disproportionation of Cu(I) species in aqueous medium probably plays a vital role for a possible air‐initiation of IBMA via single electron transfer‐living radical polymerization (SET‐LRP) mechanism. A high tolerance level to water under SET‐LRP conditions is demonstrated. The poly(IBMA) samples obtained exhibit low molecular weight distributions (1.1–1.3). Similar behavior was not observed with other common methacrylates such as methyl methacrylate, t‐butyl methacrylate, cyclohexyl methacrylate, and benzyl methacrylate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011