Germaindacenodithiophene based low band gap polymers for organic solar cells

We report the first synthesis of a fused germaindacenodithiophene monomer and its polymerisation with 2,1,3-benzothiadiazole by Suzuki polycondensation. The resulting polymer, PGeTPTBT, is semicrystalline, despite the presence of four bulky 2-ethylhexyl groups. Blends with P(70)CBM afford solar cells with efficiencies of 5.02%.     

Theoretical and experimental study of low band gap polymers for organic solar cells

A combined theoretical and experimental investigation of the electronic structure and optical properties of poly(3-hexylthiophene) (P3HT), poly[3-(4-octylphenyl)thiophene] (POPT) and poly[3-(4-octylphenoxy)thiophene] (POPOT) is reported. In comparison with P3HT, POPT and POPOT exhibit better stabilities and the presence of an oxygen atom and/or a phenyl ring in the side chains enhances conjugation. Quantum chemical calculations have been performed on oligomers of increasing chain length to establish the changes in the electronic and optical properties when going from P3HT to the new derivative POPOT. The knowledge of the structure of these polymers is of utmost importance in understanding their optical properties in different phases (solution and condensed phase). The calculations indicate that, in opposition to P3HT and POPT polymers where the introduction of alkyl chains and the pendant phenyl disturbs the planarity of the backbone of the conjugated segment, POPOT has a better degree of organization in both states: the conjugated chain remains planar even in the presence of the phenoxy groups. Finally, the exciton binding energy is evaluated for these polymers and allows us to conclude that the POPOT is a promising polymer for photovoltaic applications when compared to P3HT and POPT.     

Influence of different copolymer sequences in low band gap polymers on their performance in organic solar cells

The chemical design of a polymer can be tailored by a random or a block sequence of the comonomers in order to influence the properties of the final material. In this work, two sequences, PCPDTBT and F8BT (F8), were polymerized to form a block or a random copolymer. Differences between the various polymers were examined by exploring the surface topography and charge carrier mobility. A distinct surface texture and a higher charge carrier mobility was found for the block copolymer with respect to the other materials. Solar cells were prepared with polymer:PC₇₁BM blend active layers and the best performance of up to 2% was found for the block copolymer, which was a direct result of the fill factor. Overall, the sequences of different copolymers for solar cell applications were varied and a positive impact on efficiency was found when the block copolymer structure was utilized. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Role of balanced charge carrier transport in low band gap polymer:Fullerene bulk heterojunction solar cells

Lowering of the optical band gap of conjugated polymers in bulk heterojunction solar cells not only leads to an increased absorption but also to an increase of the optimal active layer thickness due to interference effects at longer wavelengths. The increased carrier densities due to the enhanced absorption and thicker active layers make low band gap solar cells more sensitive to formation of space charges and recombination. By systematically red shifting the optical parameters of poly[2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐p‐phenylenevinylene] and 6,6‐phenyl C₆₁‐butyric acid methyl ester, we simulate the effect of a reduced band gap on the solar cell efficiencies. We show that especially the fill factor of low band gap cells is very sensitive to the balance of the charge transport. For a low band gap cell with an active layer thickness of 250 nm, the fill factor of 50% for balanced transport is reduced to less than 40% by an imbalance of only one order of magnitude. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

All-polymer solar cells utilizing low band gap polymers as donor and acceptor

All-polymer solar cells based on blends of the low band gap polymers poly{[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]} (PTB7) and poly{[N,N-9-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,59-(2,29-bithiophene)} (P(NDI2OD-T2)) are demonstrated. The use of the donor polymer PTB7 instead of poly(3-hexylthiophene) results in a higher open-circuit voltage and an overall spectral response better matched to the solar spectrum. A power conversion efficiency of 1.1% is reported with a peak external quantum efficiency of 18% at a wavelength of 680 nm. The microstructure of PTB7:P(NDI2OD-T2) blends is also investigated using a combination of grazing-incidence wide-angle X-ray scattering (GIWAXS), near-edge X-ray fine-structure (NEXAFS) spectroscopy, atomic force microscopy (AFM), and scanning transmission X-ray microscopy (STXM). GIWAXS measurements show that PTB7:P(NDI2OD-T2) blends contain P(NDI2OD-T2) crystallites with a (100) thickness of 9.5 nm dispersed in an amorphous PTB7 matrix. STXM measurements indicate a lack of mesoscale phase separation, with AFM and NEXAFS measurements revealing a P(NDI2OD-T2)-rich top surface with fibrillar morphology. These results indicate that the pairing of low band gap polymers as both donor and acceptor polymers in all-polymer solar cells may be an effective strategy for realizing high-efficiency all-polymer solar cells. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

High performance low band gap polymer solar cells with a non-conventional acceptor

A novel C70 fullerene derivative was designed and synthesized by [4+2] cyclic addition reaction between indene derivative (methyl 1H-indene-3-carboxylate) and C70. The absorption and photoluminescence of H120 and its mixed films with different polymer donor materials were investigated, as well as its electrochemical property and electron mobility. It was found that H120 has 0.05 eV higher LUMO level than that of PC(70)BM. Its electron mobility reached 6.32 × 10(-4) cm(2) V(-1) s(-1), which is slightly lower than 9.55 × 10(-4) cm(2) V(-1) s(-1) of PC(70)BM. The photovoltaic devices based on P3HT, and two high efficiency low band gap polymers, PBDTTT-C and PBDTTDPP as donors, with H120 as an acceptor gave power conversion efficiencies of 4.2%, 6.0% and 6.2%, respectively.     

Synthesis and properties of acceptor-donor-acceptor molecules based on oligothiophenes with tunable and low band gap

A series of acceptor-donor-acceptor molecules (DCN3T, DCN5T and DCN7T) based on oligothiophenes with low band gap are synthesized. The UV-vis absorption spectra of solution show that the introduction of electron-accepting groups results in a shift of the absorption onset towards longer wavelengths. Moreover, the optical spectra of their films show a large bathochromic shift and broadening of the bands with respect to the spectra in solution. The optical band gaps of film of these A-D-A molecules are 1.90, 1.74 and 1.68 eV, respectively. Cyclic voltammetry shows that all these compounds present a reversible first oxidation process whose potential decreases with the lengthening of oligothiophene cores. Electrochemical band gaps are 2.14, 1.88 and 1.71 eV, respectively.     

Thienopyrazine or dithiadiazatrindene containing low band gap conjugated polymers for polymer solar cells

Four new low-band-gap alternating copolymers （P-1, P-2, P-3 and P-4） based on electron-rich benzodithiophene and newly developed electron-deficient units, thienopyrazine or dithiadiazatrindene derivatives, were synthesized by Stille polycondensation. All polymers exhibit good solubility in common organic solvents and a broad absorption band in the visible to near-infrared regions. The film optical band gaps of the polymers are in the range of 1.28-2.07 eV and the highest occupied molecular orbital （HOMO） energy levels are in the range of-4.99 eV to -5.28 eV. Bulk heterojunction polymer solar cells （PSCs） of the polymers were fabricated with phenyl-C61-butyric acid methyl ester （PC61BM） as acceptor material, and a power conversion efficiency of 0.80% was realized with P-1 as donor material.     

Toward low‐band gap dithienophosphole copolymers for an application in organic solar cells

Two functionalized dithieno[3,2‐b:2′,3′‐d]phospholes with solubilizing groups have been synthesized that allow for the generation of a series of π‐conjugated AB‐ and ABC‐copolymers. The polymers obtained show notable optoelectronic properties with red‐shifted absorption and emission in the orange to red section of the optical solar spectrum. Although combination of dithienophosphole units with fluorene building blocks gives access to processable polymers with band gaps between 2.2 and 2.3 eV in solution and 2.0 eV in the solid state, an ABC copolymer based on dithienophosphole, fluorene, and bis(thienyl)benzothiadiazole units was found to not only exhibit a suitable band gap for solar cell applications (solution: 2.0 eV; solid state: 1.7 eV) but also showed good solubility as well as good electron transfer properties in the presence of fullerene (C₆₀). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8179–8190, 2008     

An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage

A new low band gap polymer (E(g) = 1.6 eV) with alternating thiophene and isoindigo units was synthesized and characterized. A PCE of 3.0% and high open-circuit voltage of 0.89 V were realized in polymer solar cells, which demonstrated the promise of isoindigo as an electron deficient unit in the design of donor-acceptor conjugated polymers for polymer solar cells.     

密度泛函理论研究2种新型染料分子的分子内电荷转移现象

采用量子化学方法研究了2种新型有机染料分子P1和P4,几何优化和基态性质计算采用B3LYP密度泛函,基组为6-311G(d).由于P1和P4分子中分别存在2个对称的吸电子基团,所以2个染料分子的电子结构存在明显的特点:2个紧邻简并最低空轨道(LowestUnoccupied Molecular Orbital,LUMO)轨道.P1和P4最高占据轨道(Highest Occupied Mo-lecular Orbital,HOMO)到LUMO轨道的跃迁能级差分别为2.79和3.26eV.同时,采用含时密度泛函方法(Time-Dependent Density Functional Theory,TDDFT)研究了2个染料分子的激发态性质.通过电荷差异密度理论方法(Charge Different Density,CDD)直观的展示了分子内电荷转移的现象.对于P1,电荷转移的方向是从苯甲酸基团到2个二氰乙烯基噻吩苯基团;对于P4,电荷是由2个二氰乙烯基联苯基团基团向苯甲酸基转移.     

A series of dithienobenzodithiophene based small molecules for highly efficient organic solar cells

Three acceptor-donor-acceptor (A-D-A) small molecules DCAODTBDT, DRDTBDT and DTBDTBDT using dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene as the central building block, octyl cyanoacetate, 3-octylrhodanine and thiobarbituric acid as the end groups were designed and synthesized as donor materials in solution-processed photovoltaic cells (OPVs). The impacts of these different electron withdrawing end groups on the photophysical properties, energy levels, charge carrier mobility, morphologies of blend films, and their photovoltaic properties have been systematically investigated. OPVs device based on DRDTBDT gave the best power conversion efficiency (PCE) of 8.34%, which was significantly higher than that based on DCAODTBDT (4.83%) or DTBDTBDT (3.39%). These results indicate that rather dedicated and balanced consideration of absorption, energy levels, morphology, mobility, etc. for the design of small-molecule-based OPVs (SM-OPVs) and systematic investigations are highly needed to achieve high performance for SM-OPVs.     

Effect of additives on the photovoltaic properties of organic solar cells based on triphenylamine-containing amorphous molecules

Photovoltaic performance of the organic solar cells(OSCs)based on 2-((5′-(4-((4-((E)-2-(5′-(2,2-dicyanovinyl)-3′,4-dihexyl-2,2′-bithiophen-5-yl)vinyl)phenyl)(phenyl)amino)styryl)-4,4′-dihexyl-2,2′-bithiophen-5-yl)methylene)malononitrile(L(TPAbTV-DCN))as donor and PC70BM as acceptor was optimized using 0.25 vol%high boiling point solvent additive of1-chloronaphthalene(CN),1,6-hexanedithiol(HDT),or 1,8-diodooctane(DIO).The optimized OSC based on L(TPA-bTVDCN)–PC70BM(1:2,w/w)with 0.25 vol%CN exhibits an enhanced power conversion efficiency(PCE)of 2.61%,with Voc of0.87 V,Jsc of 6.95 mA/cm2,and FF of 43.2%,under the illumination of 100 mW/cm2 AM 1.5 G simulated solar light,whereas the PCE of the OSC based on the same active layer without additive is only 1.79%.The effect of the additive on absorption spectra and the atomic force microscopy images of L(TPA-bTV-DCN)–PC70BM blend films were further investigated.The improved efficiency of the device could be ascribed to the enhanced absorption and optimized domain size in the L(TPA-bTV-DCN)–PC70BM blend film.     

Effect of spacer insertion in a commonly used dithienosilole/benzothiadiazole-based low band gap copolymer for polymer solar cells

Dithienosilole-benzothiadiazole based low bandgap copolymers remain promising material for organic photovoltaics. A new copolymer, poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-{4,7-bis[2-(3-hexyl)thienyl]-2,1,3-benzothiadiazole-5,5′-diyl}] (PDTSDTBT) was designed by introducing a thiophene spacer bearing a hexyl chain at β-position in the main backbone and compared to its analog poly[(4,4′-dioctyldithieno[3,2-b:2′,3′-d]silole-2,6-diyl)-alt-(2,1,3-benzothiadiazole-4,7-diyl)] (PDTSBT). In PDTSDTBT, linear alkyl chains on silicon were chosen due to facile and cheap access and the inserted 3-hexylthiophene units were chosen to increase solubility and molar mass, a weak point with PDTSBT. The two parameters are important to optimize photovoltaic performances. To compare characteristics, PDTSDTBT of molar masses greater than, and equal to a sample of PDTSBT, were prepared. Pd-catalyzed Stille cross-coupling reactions in a micro-wave reactor to promote an efficient copolymerisations. A strong absorption ranging from 370 nm to 800 nm and a good thermal stability were observed. PDTSDTBT showed better solubility and higher degree of crystallinity. Facile synthesis of high molar masses meant that higher efficiencies, around 40% greater, could be obtained with PDTSDTBT. The polymer was demonstrated to be susceptible to improvement through the use of device-additives. For example, under initial optimisations using PDTSDTBT:PC₆₀BM blend at a ratio of 1:1 delivered a power conversion efficiency of 2.13% with J_SC = 7.73 (mA/cm²), under AM 1.5 (100 mW/cm²) illumination.     

Efficient iodine-free dye-sensitized solar cells employing truxene-based organic dyes

Two new truxene-based organic sensitizers (M15 and M16) featuring high extinction coefficients were synthesized for dye-sensitized solar cells employing cobalt electrolyte. The M16-sensitized device displays a 7.6% efficiency at an irradiation of AM1.5 full sunlight.     

Diketopyrrolopyrrole‐based conjugated polymers and small molecules for organic ambipolar transistors and solar cells

The present highlight discusses major work in the synthesis of low bandgap diketopyrrolopyrrole ( DPP )‐based polymers with donor–acceptor–donor ( D–A–D ) approach and their application in organic electronics. It examines the past and recent significant advances which have led to development of low bandgap DPP ‐based materials with phenyl and thiophene as donors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4241–4260     

Charge transfer in organic molecules for solar cells: theoretical perspective

This tutorial review primarily illustrates rate theories for charge transfer and separation in organic molecules for solar cells. Starting from the Fermi's golden rule for weak electronic coupling, we display the microcanonical and canonical rates, as well as the relationship with the Marcus formula. The fluctuation effect of bridges on the rate is further emphasized. Then, several rate approaches beyond the perturbation limit are revealed. Finally, we discuss the electronic structure theory for calculations of the electronic coupling and reorganization energy that are two key parameters in charge transfer, and show several applications.     

Theoretical study of the optical and charge transport properties of star-shaped molecules with 1,3,5-triazine-core derivatives as organic light-emitting and organic solar cells materials

A series of D–π–A star-shaped molecules has been investigated theoretically by using density functional theory (DFT) to reveal their optical, electronic, and charge transport properties for applications in organic light-emitting diodes (OLEDs) and organic solar cells (OSCs). The calculated results show that their optical, electronic, and charge transport properties are affected by the different end groups and π-bridges. Our results reveal that the molecules under investigation can serve as OSCs donor materials and/or luminescent materials for OLEDs. In addition, all molecules are expected to be promising candidates for hole- and electron-transport materials. On the basis of the obtained results, we propose a rational way for the design of multifunctional materials for OLEDs and OSCs applications.     

Pico- and nano-second laser flash photolysis study on photoinduced charge separation in oligothiophene-C60 dyad molecules

Photoinduced charge separation (CS) and charge recombination (CR) processes of octathiophene-C₆₀ and dodecathiophene-C₆₀ dyad molecules (8T-C₆₀ and 12T-C₆₀, respectively) have been investigated by time-resolved absorption spectroscopy in the visible and near-IR regions. In toluene, ¹8T*-C₆₀ and ¹12T*-C₆₀ showed energy transfer to ¹C*-moiety predominantly, while 60 contribution of CS was small. In various polar solvents, on the other hand, CS states were predominantly formed from both singlet-excited oligothiophene and ¹C6*0-moiety because of lower CS level in polar environments. The CR process generating both the triplet state of oligothiophene and the ground state was confirmed in anisole and anisole/toluene mixture within a few nanoseconds. In more polar solvents (dielectric constant (∈_s) > 7), CS states showed two components decay: Slow decay component showed lifetime in the hundred nanosecond-region, while fast component decayed within a few nanoseconds. For the mechanism of the long-living CS state in polar solvents (∈_s > 7), equilibrium between the CS state and the triplet state was proposed. Furthermore, effects of length of oligothiophene on the CS and CR processes were discussed on the basis of the free energy changes.