Iron(III) spin transition compound with a large thermal hysteresis

The magnetic properties of the spin-crossover compound, [Fe(qsal)₂]NCSe·2DMSO (N-(8-quinolyl)-salicyladimine) (1), have been measured. We have discovered that the compound 1 exhibits a wide "thermal hysteresis loop" of 115 K (T_1/2 = 324 K and T_1/2 = 209 K) in the first cycle. Thermogravimetric analysis shows that solvent molecules of the compound 1 are removed at around 324 K. This means that the hysteresis loop observed for the first cycle is only an apparent one. Following the first loop, the compound 1 shows a spin-crossover in warming mode. The spin transition occurs at T_1/2= 285 K and T_1/2 = 209 K and the hysteresis width can be estimated to be 76 K, which is one of the largest values reported so far for spin-crossover compounds. It is thought that the cooperativity produced in the compound mainly arises from the intermolecular interactions between the quinoline and the phenyl rings.     

Iron(II) spin crossover complexes with branched long alkyl chain

The bzimpy iron(II) complexes, 1-3, containing branched long alkyl chains were synthesized and characterized in detail. The temperature-dependant magnetic susceptibility of 1 showed gradual spin crossover behavior from low spin to high spin state, while 2 retained only low spin state in the same condition. Interestingly, 3 displayed an abrupt spin transition in temperature range from T_1/2↑ = 236 K to T_1/2↓ = 230 K with the thermal hysteresis loop about 6 K. The differential scanning calorimetric analysis of 3 revealed two species of liquid crystal phase transitions at 236 K and 351 K, respectively.     

Spin transition at the mesophase transition temperature in a cobalt(II) compound with branched alkyl chains

A cobalt(II) compound, [Co(C5C12C10-terpy)2](BF4)2 [C5C12C10-terpy = 4',5' '-decyl-1' '-(heptadecyloxy)-2,2':6',2' '-terpyridine] with branched alkyl chains, based on a terpyridine frame, was synthesized. The cobalt(II) compound exhibits a spin transition between low-spin and high-spin with a thermal hysteresis loop (T(1/2) upward arrow = 288 K and T(1/2) downward arrow = 284 K) at the liquid-crystal transition temperature. It is the first example in the cobalt(II) compounds in which the spin transition occurs at the crystal-liquid crystal transition temperature.     

Synthesis and characterization of a dinuclear iron(II) spin crossover complex with wide hysteresis

The magnetic properties and results from X-ray structure analysis for a new pair of iron(II) spin-crossover complexes [FeL1(meim) 2](meim) ( 1(meim)) and [Fe 2L2(meim) 4](meim) 4 ( 2(meim) 4), with L1 being a tetradentate N 2O 2 (2-) coordinating Schiff-base-like ligand [([3,3']-[1,2-phenylenebis(iminomethylidyne)]bis(2,4-pentane-dionato)(2-)N,N',O (2),O (2)'], L2 being an octadentate, dinucleating N 2O 2 (2-) coordinating Schiff-base-like ligand [3,3',3',3']-[1,2,4,5-phenylenetetra(iminomethylidyne)]tetra(2,4-pentanedionato)(2-) N, N', N', N', O (2), O (2) ', O (2) ', O (2) '], and meim being N-methylimidazole, are discussed in this work. Crystalline samples of both complexes show a cooperative spin transition with an approximately 2-K-wide thermal hysteresis loop in the case of 1(meim) ( T 1/2 increase = 179 K and T 1/2 decrease = 177 K) and an approximately 21-K-wide thermal hysteresis loop in the case of dinuclear complex 2(meim) 4 ( T 1/2 increase= 199 K and T 1/2 decrease= 178 K). For a separately prepared powder sample of 2, a gradual spin transition with T 1/2 = 229 K is observed that was additionally followed by Mossbauer spectroscopy. The results from X-ray structure analysis give a deeper insight into the molecule packing in the crystal and, by this, help to explain the increase of cooperative interactions during the spin transition when going from the mononuclear to the dinuclear complex. Both compounds crystallize in the triclinic space group P1, and the X-ray structure was analyzed before and after the spin transition. The change of the spin state at the iron center is accompanied by a change of the O-Fe-O angle, the so-called bite of the equatorial ligand, from about 109 degrees in the high-spin state to 89 degrees in the low-spin state. The cooperative interactions responsible for the thermal hysteresis loop are due to elastic interactions between the complex molecules in both cases. However, due to the higher symmetry of the dinucleating ligand in 2(meim) 4, a 3D network of short contacts is formed, while for mononuclear complex 1(meim), a 2D layer of linked molecules is observed. The spin transition was additionally followed in solution using (1)H NMR spectroscopy for both complexes. In both cases, a gradual spin transition is observed, and the increase of cooperative interactions when going from the mononuclear to the dinuclear system is solely attributed to the extended network of intermolecular contacts.     

Mesogenic and magnetic behavior in cobalt(II) and iron(II) compounds with long alkyl chains

Abstract  

Metal complexes with long alkyl chains [Co(C16-terpy)₃](BF₄)₂ (1), [Fe(C16-terpy)₂](BF₄)₂ (2), [Co(C16-terpy)₂](BPh₄)₂ (3), [Co(C14-terpy)₂](BF₄)₂ (4), and [Fe(C12C10C5-terpy)₂](BF₄)₂ (5) were synthesized and their physical properties characterized, where C16-terpy, C14-terpy, and C12C10C5-terpy are 4′-hexadecyloxy-2,2′:6′,2′′-terpyridine, 4′-tetradecyloxy-2,2′:6′,2′′-terpyridine, and 4′-5′′′-decyl-1′′′-heptadecyloxy-2,2′:6′,2″-terpyridine, respectively. Complexes 1, 2, and 5 exhibited liquid–crystal properties in the temperature ranges of 371–528 K and 466–556 K, and 88–523 K, respectively. Variable-temperature magnetic susceptibility measurements revealed that the Co(II) complexes 1 and 4 exhibited unique spin transitions (T _1/2↓ = 217 K and T _1/2↑ = 260 K for 1 and T _1/2↓ = 250 K and T _1/2↑ = 307 K for 4), so-called ‘reverse spin transition,’ induced by structural phase transitions. Complex 3 exhibited gradual spin-crossover behavior (T _1/2 = 160 K.), and complex 5 exhibited spin transitions (T _1/2↑ = 288 K and T _1/2↓ = 284 K) at the liquid crystal transition temperature. Compounds with multifunction, i.e., magnetic and liquid–crystal properties, are important in the development of molecular materials.     

Mesogenic and magnetic behavior in cobalt(II) and iron(II) compounds with long alkyl chains

Abstract  Metal complexes with long alkyl chains [Co(C16-terpy)₃](BF₄)₂ (1), [Fe(C16-terpy)₂](BF₄)₂ (2), [Co(C16-terpy)₂](BPh₄)₂ (3), [Co(C14-terpy)₂](BF₄)₂ (4), and [Fe(C12C10C5-terpy)₂](BF₄)₂ (5) were synthesized and their physical properties characterized, where C16-terpy, C14-terpy, and C12C10C5-terpy are 4′-hexadecyloxy-2,2′:6′,2′′-terpyridine, 4′-tetradecyloxy-2,2′:6′,2′′-terpyridine, and 4′-5′′′-decyl-1′′′-heptadecyloxy-2,2′:6′,2″-terpyridine, respectively. Complexes 1, 2, and 5 exhibited liquid–crystal properties in the temperature ranges of 371–528 K and 466–556 K, and 88–523 K, respectively. Variable-temperature magnetic susceptibility measurements revealed that the Co(II) complexes 1 and 4 exhibited unique spin transitions (T _1/2↓ = 217 K and T _1/2↑ = 260 K for 1 and T _1/2↓ = 250 K and T _1/2↑ = 307 K for 4), so-called ‘reverse spin transition,’ induced by structural phase transitions. Complex 3 exhibited gradual spin-crossover behavior (T _1/2 = 160 K.), and complex 5 exhibited spin transitions (T _1/2↑ = 288 K and T _1/2↓ = 284 K) at the liquid crystal transition temperature. Compounds with multifunction, i.e., magnetic and liquid–crystal properties, are important in the development of molecular materials. Graphical Abstract  

1-D cobalt(II) spin transition compound with strong interchain interaction: [Co(pyterpy)Cl(2)].X

Cobalt(II) compounds [Co(pyterpy)Cl(2)].MeOH (1.(MeOH)) and [Co(pyterpy)Cl(2)].2H(2)O (1.(2H(2)O)) were synthesized. The compound 1.(MeOH) forms the quasi 3-D networks by making pi-pi stacking between the 1-D chains. The methanol molecules from 1.(MeOH) can be removed by heating, and substituted by absorption of water molecules. The MeOH molecules in 1.(MeOH) are removed by heating at 410 K, and they are substituted by water molecules to form 1.(2H(2)O). 1.(2H(2)O) exhibits a S = (3)/(2) (HS) left arrow over right arrow S = (1)/(2) (LS) spin transition with a thermal hysteresis. We have succeeded in constructing a guest dependent 1-D spin-crossover cobalt(II) compound.     

Spin-crossover cobalt(II) compound with banana-shaped structure

A banana-shaped spin-crossover (SCO) cobalt(II) complex [Co(C16-terpy)2](BPh4)2 (1) with long alkyl chains, based on a terpyridine frame, was synthesized. Compound 1 exhibited very gradual SCO behavior and changes in the dielectric constant. This shows a way in which SCO materials can be used in electronic devices.     

Iron(II) spin transition 1,2,4-triazole chain compounds with novel inorganic fluorinated counteranions

New one-dimensional spin transition coordination polymers of formula [Fe(NH₂trz)₃](AF₆) · nH₂O (A = Ti, Zr, Sn; NH₂trz = 4-amino-1,2,4-triazole) have been synthesized in MeOH and EtOH media. These materials display an abrupt and hysteretic spin transition around 200 K as well as a reversible thermochromic effect on cooling. A preliminary evaluation of the lattice dynamics in the high-spin and low-spin states is presented.     

Azobenzene derivatives with a long alkyl chain and aminoxyls

A trans-azobenzene derivative with a long alkyl chain and a TEMPO radical showed photo-induced isomerization to become the corresponding cis-isomer with a significant change of its intermolecular magnetic interaction from a weak ferromagnetic one based on the CW model to a relatively strong antiferromagnetic one based on the ST model with the J-value of 36.7 K.     

The thermal behaviour of mixed long chain alkylammonium tetrachloromanganates(II)

The results of a calorimetric and structural investigation of mixtures of layer compounds of the kind (RNH₃)₂MCl₄, R being a long chain n-alkyl group, show that the low-temperature forms are solid solutions, mainly ordered from the conformational viewpoint, in which chains of different length are more or less randomly arranged on the surface of the anionic layers. The observed high enthalpy solid—solid phase transitions correspond to the “melting” of the hydrocarbon layers, giving solid solutions in which the conformational freedom of the alkyl chains is similar to that of hydrocarbon substances in the liquid state.     

Iron(III) spin-crossover compounds with a wide apparent thermal hysteresis around room temperature.

The magnetic properties of the spin-crossover compounds, [Fe(qsal)2]NCSe-MeOH (1) and [Fe(qsal)2]NCSe-CH2Cl2 (2), have been measured. We have discovered that both compounds 1 and 2 exhibit a wide thermal hysteresis loop of 140 K (T(1/2) upward arrow = 352 K and T(1/2) downward arrow = 212 K) and 180 K (T(1/2) upward arrow = 392 K and T(1/2) downward arrow = 212 K), respectively, in the first cycle. Thermogravimetric analysis shows that solvent molecules escape from compounds 1 and 2 around 340 and 395 K, respectively. This means that the hysteresis loops observed for the first cycle are only apparent ones. Following the first loop, they show a two-step spin-crossover in warming mode. The so-called "step 1" and "step 2" are centered around T(1/2(S1)) upward arrow = 215 K and T(1/2(S2)) upward arrow = 282 K, respectively. On the other hand, a one-step spin-crossover occurs at T(1/2) downward arrow = 212 K in cooling mode. The hysteresis widths can be estimated to be 3 K (step 1) and 70 K (step 2), assuming that the widths in steps 1 and 2 are defined as the differences between T(1/2(S1)) upward arrow and T(1/2) downward arrow, and T(1/2(S2)) upward arrow and T(1/2) downward arrow, respectively. The hysteresis width of 70 K in step 2 is one of the widest values reported so far for spin-crossover complexes. It is thought that the cooperativity operating in the complexes arises mainly from the intermolecular pi interactions between quinoline and phenyl rings. Using a previously reported model, we are able to simulate the hysteresis loop with a two-step spin-crossover in warming mode and a one-step transition in cooling mode.     

Photoinduced spin transition for Iron(II) compounds with liquid-crystal properties

The iron(II) compounds [Fe(3Cn-L)2(NCS)2] (n = 6 (1), n = 8 (2), n = 10 (3), n = 12 (4), n = 14 (5), n = 16 (6), n = 18 (7), n = 20 (8), and n = 22 (9)) were synthesized and their physical properties characterized by polarizing optical microscopy, differential scanning calorimetry, and powder X-ray analysis, where 3Cn-L denotes bidentate Schiff-base ligands formed from the corresponding aniline derivatives and pyridine-2-carboxyaldehyde. The iron(II) compounds 4-8 exhibited crystal to liquid-crystal transitions at 318, 334, 345, 338, and 347 K, respectively. Variable-temperature magnetic susceptibility measurements revealed that the compounds 1-9 exhibit spin-crossover behavior between the high-spin and low-spin states and a photoinduced spin transition from a low-spin state to a metastable high-spin state. Therefore, the iron(II) compounds 4-8 can undergo spin-crossover and photoinduced spin transition as well as have liquid-crystal properties all in a single molecule. Compounds with multifunctions are important in the development of molecular switches and optical materials.     

A large thermal hysteresis loop produced by a charge-transfer phase transition in a rubidium manganese hexacyanoferrate

In a rubidium manganese hexacyanoferrate, RbMn[Fe(CN)(6)], the magnetic susceptibility (chi(M)) decreased at 225 K (=T(1/2)decreasing) and abruptly increased at 300 K (=T(1/2)increasing) in the cooling and warming processes, respectively. X-ray photoelectron spectroscopy and infrared spectroscopy indicated that the high-temperature (HT) and low-temperature (LT) phases were composed of Mn(II)-NC-Fe(III) and Mn(III)-NC-Fe(II), respectively. A structural change from cubic (F43m, a = 10.533 A) to tetragonal (I4m2, a = b = 7.090 A, c = 10.520 A) accompanied the phase transition, and, on the basis of these results, the HT and LT phases were assigned to Mn(II)(t(2g)(3)e(g)(2), (6)A(1g); S = (5)/(2))-NC-Fe(III) (t(2g)(5), (2)T(2g); S = (1)/(2)) and Mn(III)(e(g)(2)b(2g)(1)a(1g)(1), (5)B(1g); S = 2)-NC-Fe(II) (b(2g)(2)e(g)(4), (1)A(1g); S = 0), respectively. This phenomenon is caused by a metal-to-metal charge transfer from Mn(II) to Fe(III) and a Jahn-Teller distortion of the produced Mn(III) ion. The reaction mechanism is discussed, considering the entropy difference between the HT and LT phases.     

A spin transition molecular material with a wide bistability domain

[Fe(hyptrz)3](4-chloro-3-nitrophenylsulfonate)22 H2O (1; hyptrz=4-(3-hydroxypropyl)-1,2,4-triazole) has been synthesized and its physical properties have been investigated by several physical techniques including magnetic susceptibility measurements, calorimetry, and M?ssbauer, optical, and EXAFS spectroscopy. Compound 1 exhibits a spin transition below room temperature, together with a very wide thermal hysteresis of about 50 K. This represents the widest hysteresis loop ever observed for an FeII-1,2,4-triazole spin transition material. The cooperativity is discussed on the basis of temperature-dependent EXAFS studies and of the structural features of a CuII analogue. The EXAFS structural model of (1) in both spin states is compared to that obtained for a related material whose spin transition occurs above room temperature. EXAFS spectroscopy suggests that 1,2,4-triazole chain compounds retain a linear character whatever the spin state of the iron(II).     

A tetranuclear cobalt(II) chain with slow magnetization relaxation

A solvothermally derived tetranuclear cobalt(II) complex, [Co(4)(phen)(4)Cl(8)] (phen = phenanthroline), featuring a zig-zag backbone of {Co(μ(2)-Cl)(2)Co} planes, exhibits ferromagnetic exchange and slow relaxation of the magnetization and represents the first Co SMM with a linear core structure.     

A dimeric high-spin nickel(II) compound with a transition to monomeric tetrahedral nickel(II)

Summary The synthesis and characterisation of dichloro[bis(3,5-dimethylpyrazolyl)methane]nickel(II) s described. At ambient temperature the compound is dimeric with chloro-bridged high-spin five-coordinate Ni^II     

Synthesis and thermal behaviour of morpholine complexes with cobalt (II) and manganese (II) thiocyanates

The 1 4 complexes of cobalt (II) and manganese (II) thiocyanates with morpholine (Morph), [M(NCS)₂(Morph)₄] (M=Co, Mn), were prepared and studied by means of thermogravimetry, derivative thermogravimetry and differential scanning calorimetry. By thermal treatment of the above compounds, the 12 and 11 complexes, [M(NCS)₂(Morph)₂] (M=Co, Mn; n=1, 2), were formed. Magnetic data, infrared and electronic spectra and molar conductance values for the compounds are reported. All the complexes contain N-bonded morpholine and the 14 complexes are suggested to have a monomericcis pseudooctahedral structure with N-bonded thiocyanate, whereas the 12 and 11 complexes are considered to have a six-coordinated polymeric configuration involving bridging NCS groups.

---

Zusammenfassung Mittels. Thermogravimetrie, Derivativthermogravimetrie und Differential-Scanning-Kalorimetrie wurden die zuvor dargestellten 14 Komplexe von Kobalt(II)- und Mangan(II)thiozyanaten mit Morpholin (morph) [M(NCS)₂(morph)₄] mit M=Co, Mn untersucht. Durch Erhitzen obiger Verbindungen entstehen die 12- bzw. 11-Komplexe [M(NCS)₂(morph)_n] mit M=Co, Mn undn=1, 2. Magnetisierungsdaten, Infrarot- und Elektronenspektren sowie die molare Leitfähigkeit der Verbindungen wurden ermittelt bzw. angegeben. Alle Komplexe enthalten N-gebundenes Morpholin. Die 14 Komplexe besitzen eine monomere cis-pseudooktaedrische Struktur mit N-gebundenem Thiozyanat, während die 12- und 11-Komplexe eine hexakoordinierte polymere Struktur mit NCS-Gruppenbrücken zu besitzen scheinen.

---

, (.) [(S)₂(.)₄]. [ (S)₂(.) _n ], =1 2. , , . . 14 ( : ) - N- . 121 11 - , .

---

---

The authors express their thanks to Dirección Regional de Universidad e Investigación de la Comunidad Autónoma de Murcia for providing financial assistance.     

A temperature-dependent order-disorder and crystallographic phase transition in a 0D Fe(II) spin crossover compound and its non-spin crossover Co(II) isomorph

The new dipyridylamino/triazine ligand DDE (N(2),N(2),N(4),N(4)-tetraethyl-N(6),N(6)-di(pyridin-2-yl)-1,3,5-triazine-2,4,6-triamine) has been incorporated into the mononuclear Fe(II) SCO compounds cis-[Fe(II)(NCSe)(2)(DDE)(2)] (1), cis-[Fe(II)(NCBH(3))(2)(DDE)(2)] (2), and cis-[Fe(II)(NCS)(2)(DDE)(2)] (3). Magnetic susceptibility measurements reveal that each of 1, 2 and 3 undergoes a complete, continuous spin transition with a T(?) of ～260 K, ～300 K and ～205 K, respectively. An analogue and isomorph of 1, cis-[Co(II)(NCSe)(2)(DDE)(2)] (4), remains high spin down to low temperatures. Variable temperature single crystal data reveal that 1 and 4 undergo a crystallographic phase transition (from orthorhombic Pbcn at high temperatures to monoclinic P2/c at low temperatures) accompanied by an order-disorder transition of ethyl moieties of the DDE ligand. In the Pbcn phase, the structures of 1 and 4 contain one crystallographically unique M(II) centre, while in the P2/c phase, 1 and 4 contain two crystallographically unique M(II) centres. Variable temperature powder X-ray diffraction experiments reveal that the crystallographic phase transition occurs at ～250 K for 1. The occurrence of the concomitant order-disorder and crystallographic phase transitions undergone by 1 and 4 is not directly apparent in their magnetic susceptibility measurements, and this is likely due to the local environment of the M(II) centres remaining largely undisturbed as the transitions occur. The compound 2 is isostructural to 1 and 4 at low temperatures.