Isotachophoresis-based sample preparation of cellulases in sugarcane juice using bovine serum albumin as a model protein

The foremost requirement of quantification of cellulases expressed in genetically modified sugarcane is an efficient sample clean-up. This work investigates the feasibility of isotachophoresis for this purpose. An electrolyte system comprising a leading electrolyte of 10 mM formic acid at pH 9.0 and a terminating electrolyte of 10 mM β-alanine was devised and used to perform isotachophoresis of cellulases. The use of a simple front cutting method removed a majority of interfering species in the juice, thereby resulting in the formation of a distinct zone of desired proteins. In comparison to techniques such as ultrafiltration and liming, the analysis time and loss of desired proteins was lower when the sample was prepared by using isotachophoresis. Hence, isotachophoresis was an ideal choice for purification of the proteins in question from the remaining components in the juice.     

Rapid chloride analysis using miniaturised isotachophoresis

A new design of miniaturised separation device for performing isotachophoresis (ITP) has been produced. The device contains a simple arrangement of channels comprising a single separation channel with a 'double T' injection geometry. The device was produced in poly(methyl methacrylate) and incorporates an on-column conductivity detector. A new electrolyte system was developed to enable the rapid determination of chloride to be made. This electrolyte system uses a leading ion of 3.5 mM nitrate at pH 3.0 with 0.5 mM indium(III) added as a complexing agent. Use of this electrolyte system with the new separation device allowed chloride samples to be analysed in under 100 s, with a limit of detection (LOD) calculated to be 2.2 mg l(-1).     

Inorganic Arsenic and Selenium Determination Using Miniaturised Isotachophoresis

A new method allowing the simultaneous determination of arsenic(V), selenium(IV) and selenium(VI) using miniaturised isotachophoresis has been developed. The method uses 0.02 M nitric acid buffered to pH 5.5 with histidine as the leading electrolyte. Using a miniaturised poly(methyl methacrylate) chip device with an integrated conductivity detector, separations of model samples and an industrial process stream sample were achieved. Limits of detection were calculated to be 0.85 mg L⁻¹ for arsenic(V), 0.95 mg L⁻¹ for selenium(IV) and 1.0 mg L⁻¹ for selenium(VI). A method for the analysis of arsenic(III), using a glycolic acid based leading electrolyte to eliminate carbonate interference is also presented.     

Determination of egg white lysozyme by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis - capillary zone electrophoresis method for the determination of lysozyme in selected food products is described. The optimized electrolyte system consisted of 10 mM NH(4)OH + 20 mM acetic acid (leading electrolyte), 5 mM epsilon -aminocaproic acid +5 mM acetic acid (terminating electrolyte), and 20 mM epsilon -aminocaproic acid +5 mM acetic acid +0.1% m/v hydroxypropylmethylcellulose (background electrolyte). A clear separation of lysozyme from other components of acidic sample extract was achieved within 15 min. Method characteristics, i.e., linearity (0-50 micrograms/mL), accuracy (recovery 96+/-5%), intra-assay (3.8%), quantification limit (1 microgram/ml), and detection limit (0.25 microgram/mL) were determined. Low laboriousness, sufficient sensitivity and low running costs are important attributes of this method. The developed method is suitable for the quantification of the egg content in egg pasta.     

Determination of phytic acid and inositolphosphates in barley

Phytic acid (PA) and lower inositolphosphates (InsP(n) ) is the main storage form of phosphorus in grains or seeds. The content of PA and InsP(n) in different varieties of barley was analyzed by capillary isotachophoresis and online-coupled capillary isotachophoresis with CZE. The electrolytes (in demineralized water) for the isotachophoretic analysis consisted of 10?mM HCl, 14?mM glycylglycine, and 0.1% 2-hydroxyethylcellulose (leading) and 10?mM citric acid (terminating). The optimized electrolytes for the online coupling isotachophoresis with zone electrophoresis analysis were mixtures of 5?mM HCl, 7?mM glycylglycine, and 0.1% 2-hydroxyethylcellulose (leading), 20?mM citric acid, 10?mM glycylglycine, and 0.1% 2-hydroxyethylcellulose (background) and 10?mM citric acid (terminating). PA and all studied InsP(n) were separated within 25?min and detected by a conductivity detector. Simple sample preparation (acidic extraction), sufficient sensitivity, speed of analysis, and low running cost are important attributes of the electrophoretic methods. The method was used for the determination of PA and InsP(n) in barley varieties within an ongoing research project.     

Determination of the potassium content of explosive residues using miniaturised isotachophoresis

A new method has been developed to allow the determination of potassium in post-explosion residues to be made using miniaturised isotachophoresis. The method is based on the use of a caesium leading ion with 4.5 mM 18-crown-6 ether added to retard the potassium to allow reliable determinations to be made. With the conditions selected no interference was noted from other small inorganic cations, such as ammonium, barium, calcium, magnesium, sodium or strontium. The method was successfully applied to the analysis of seven samples containing explosive residues obtained from the unconfined burning of several flash powders. The procedure was found to offer good linearity for potassium determinations over the concentration range of 1.25-150 μg/mL with a coefficient of determination of 0.999 achieved.     

The simultaneous determination of chloride, nitrate and sulphate by isotachophoresis using bromide as a leading ion

A new method has been devised to allow the determination of small inorganic anions using isotachophoresis. This method makes use of indium(III) as a counter ion to manipulate the effective mobilities of inorganic anion species by means of complexation reactions. This new procedure successfully allowed the simultaneous determination of nitrate, chloride and sulphate to be realised on a capillary scale instrument and in a chip-based separation device. The electrolyte system developed to allow the separation to be achieved employed a 10mM bromide-based leading electrolyte containing 1.25 mM indium(III) at pH 3.15 and a terminating electrolyte of cyanoacetic acid.     

Analysis of chloride, bromide and iodide using miniaturised isotachophoresis on a planar polymer chip

A new method has been developed to allow the determination of the halide anions chloride, bromide and iodide using isotachophoresis. This method employs a new electrolyte system which incorporates the novel application of indium(III) as a complexing agent. This electrolyte system was devised based on the findings of an investigation into the potential for using indium(III) as a complexing counter ion to selectively manipulate the effective mobilities of halide ions. A leading electrolyte incorporating 3.5 mmol dm(-3) of indium(III) allowed the simultaneous determination of chloride, bromide and iodide to be successfully achieved. The new procedure allows such separations to be made without interference from common inorganic anions such as sulfate and nitrate. Separations were performed using a miniaturised planar poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes. Using this instrumentation the limits of detection were calculated to be 0.7 mg dm(-3), 1.7 mg dm(-3) and 2.2 mg dm(-3) for chloride, bromide and iodide respectively.     

Electrophoretic determination of calystegines A3 and B2 in potato

Potatoes, members of the Solanaceae plant family, contain calystegines, water-soluble nortropane alkaloids, which are biologically active as glycosidase inhibitors. The content of calystegines A(3) and B(2) in different varieties of potato and in various parts of the tubers (whole potato, peel, flesh, and sprouts) were analysed by new capillary zone electrophoresis and capillary isotachophoresis methods and by the routine GC method. The optimized background electrolyte for capillary zone electrophoretic analysis was mixture of 20 mM histidine, 20 mM N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid and 20% (v/v) methanol in demineralized water. Calystegines were detected by indirect UV detection at 210 nm. A clear separation of calystegines from other components of the methanolic sample extract was achieved within 4 min. The electrolytes for isotachophoretic analysis consisted of 5 mM NH(4)OH, 10 mM N,N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid, 0.1% hydroxyethylcellulose and 20% (v/v) methanol in demineralized water (leading) and 5 mM histidine+10 mM acetic acid+20% (v/v) methanol in demineralized water (terminating). Calystegines were separated within 20 min and detected by a conductimeter. Method characteristics of both zone electrophoresis and isotachophoresis, i.e., linearity (10-100 ng/microl and 1-10 ng/microl), accuracy (recovery 96+/-5% and 98+/-4%), intra-assay repeatability (4.2% and 3.5%), and detection limit (3 and 0.4 ng/microl) were evaluated. Simple sample preparation, sufficient sensitivity, speed of analysis, and low running cost are important attributes of the electrophoretic methods. The overall results of electrophoretic methods were comparable with GC.     

Determination of the ascorbate content of photographic developer solutions using miniaturised isotachophoresis on a planar chip

The use of miniaturised isotachophoresis, performed on a planar poly(methyl methacrylate) device with integrated platinum conductivity electrodes, for the analysis of the ascorbate content of photographic developer solutions has been investigated. An electrolyte system has been developed which enabled the analysis to be made without interference from any of the other components in the developer solution, a number of which were present at significantly higher concentrations than that of the ascorbate ions. Using this system, the ascorbate content of the developer solutions could be analysed in under 6 min. The limit of detection for ascorbate using miniaturised isotachophoresis was calculated to be 0.011 mmol dm(-3).     

Transient isotachophoresis of highly saline trace metals under strong electroosmotic flow conditions

Transient isotachophoresis (TITP) is usually performed under low-electroosmotic flow (EOF) conditions using a coated capillary or a low pH background electrolyte. We used a bare fused-silica capillary for TITP stacking of anionic complexes of some heavy metals under high-EOF conditions (pH 9.0). The sample component chloride as a leading electrolyte induced stacking by an isotachophoretic mechanism and the complexing agent 4-(2-pyridylazo) resorcinol (PAR) acted as a terminating electrolyte. The optimized background electrolyte was composed of 150 mM N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid, 127 mM triethylamine, and 0.1 mM PAR at pH 9.0. The strong EOF at pH 9.0 pulled the analytes against their mobilities toward the outlet side, allowing a separation in the normal polarity mode. The stacking efficiency, reproducibility, analysis time, and sample loading capacity in coated and bare capillaries were compared. The stacking efficiency and reproducibility were higher and the analysis time was shorter in the coated capillary. However, a larger volume of a sample could be injected in the bare capillary to achieve detection limits comparable to those for the coated one without compromising the resolution between the analyte peaks. The limits of detection (S/N = 3) were in the sub-ppb range for the selected metals (Fe2+, 0.3 ppb; Ni2+, 0.16 ppb; and Zn2+, 0.8 ppb) in a standard saline sample with 250 mM NaCl matrix. The proposed method was successfully applied to the analysis of reference urine samples and human urine samples.     

Isotachophoresis of beta-blockers in a capillary and on a poly(methyl methacrylate) chip

Analysis of the beta-blockers oxprenolol, atenolol, timolol, propranolol, metoprolol, and acebutolol in human urine by a combination of isotachophoresis (ITP) and zone electrophoresis (ZE) was investigated. Methods were developed with a conventional capillary electrophoresis (CE) apparatus and a poly(methyl methacrylate) (PMMA) microchip system. With CE the separation of oxprenolol, atenolol, timolol, and acebutolol from a standard solution containing 5 microg/mL of each compound was accomplished by performing ZE with transient ITP. The electrolyte system consisted of 10 mM sodium morpholinoethane sulfonate (pH 5.5) and 0.1% methylhydroxyethylcellulose as the leading electrolyte and 30 mM ortho-phosphoric acid (pH 2.0) as both the terminating and the ZE background electrolyte. With the microchip system the separation of oxprenolol and acebutolol from a standard solution containing 10 microg/mL of each compound was accomplished by a coupled-channel ITP-ZE device using the same leading electrolyte solution as the CE system but 5 mM glutamic acid (pH 3.4) as terminating and background electrolytes. The systems were used for analyses of patient urine samples. Water-soluble hydrophilic matrix compounds were removed from the urine samples by solid-phase extraction (SPE). Limits of quantification below 5 microg/mL could be achieved. The PMMA ITP-ZE chip has not earlier been used for analyses of any drugs from urine samples.     

Estimation of the critical micelle concentrations and the aggregation numbers of sodium alkyl sulfates by capillary-type isotachophoresis

The analytical procedure for the separation and quantification of bulk and micellar phases for sodium alkyl sulfates has been investigated by a capillary-type isotachophoresis using a potential gradient detector. Monomer solutions were distinguished from micellar solutions at pH 5.5–6.0; hydrochloric acid — L-Histidine mixture was used as the leading electrolyte and 2-(N-Morpholino) ethanesulfonic acid as the terminating electrolyte.The potential unit value (PU value) due to the monomer solutions was larger than that due to the micellar solutions. The zone length due to monomer solutions increased with increasing concentration of surfactant until a given concentration (CMC); beyond this point the values became constant. On the other hand, the zone length due to micellar solutions increased from this point. We report an applicability of capillary-type isotachophoresis to determination of the CMC's and aggregation number for various sodium alkyl sulfates.     

Determination of glycyrrhizin in liqueurs by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis-capillary zone electrophoresis method for the determination of glycyrrhizin in liqueurs is described. The optimised electrolyte system was 5 mM HCl+11 mM varepsilon-aminocaproic acid+0.05% hydroxyethylcellulose+30% methanol (leading electrolyte), 5 mM caproic acid+30% methanol (terminating electrolyte) and 20 mM caproic acid+10 mM histidine+0.1% hydroxyethylcellulose+30% methanol (background electrolyte). Method characteristics, i.e., linearity (20-500 ng/ml), accuracy (recovery 99+/-4%), intra-assay repeatability (2%), intermediate repeatability (3.8%) and detection limit (8 ng/ml) were determined. Speed of analysis, low laboriousness, high sensitivity and low-running cost are the typical attributes of the capillary isotachophoresis-capillary zone electrophoresis method. Developed method was successfully applied to analysis of liqueurs with liquorice extract and some foods (sweets and food supplements) containing liquorice. Found levels of glycyrrhizin in liqueurs, sweets and food supplements varied between 1-16 mg/l, 850-1050 mg/kg and 1.6-1.8 g/kg, respectively.     

A miniaturised isotachophoresis method for magnesium determination

The use of malonic acid as a complexing agent has enabled a new method to be devised to allow the determination of magnesium to be made using miniaturised isotachophoresis. Using a leading electrolyte of 10 mmol L⁻¹ caesium hydroxide and 2 mmol L⁻¹ malonic acid at pH 5.1 gave the method a high specificity towards magnesium. Investigations using a poly(methyl methacrylate) chip device with an integrated conductivity detector showed that no interference from calcium, strontium, barium and sodium should occur. The method was found to be linear over the range of magnesium concentrations from 0.625 to 75 mg L⁻¹ and the limit of detection was calculated to be 0.45 mg L⁻¹. Separations were demonstrated with water samples but the procedure should also be applicable to more complex sample matrices such as inorganic explosive residues, blood or urine.     

Isotachophoretic separation of alkylsulfonates and determination of methanesulfonic acid as main component and as trace component in pharmaceutical drug substances

Alkylsulfonates from methanesulfonic acid to decanesulfonic acid were separated by isotachophoresis with conductivity detection in a common electrolyte system at pH 4.8. The electrolyte system consisted of 10 mM HCl buffered with epsilon-aminocaproic acid (pH 4.8) and 0.1% methylhydroxyethylcellulose (MHEC) acting as the leading electrolyte. The terminating electrolyte was 20 mM caproic acid also containing 0.05% MHEC. Current settings of 250 microA for the first and 50 microA for the second capillary were applied. On one hand, the method was applied to the determination of the content of methanesulfonate as the salt forming agent (mesilate) in a recently registered drug substance. The results obtained by ITP were compared with an orthogonal titration method. On the other hand, due to the column-coupling configuration of the electrophoretic instrument, the method could be extended to the trace determination in the ppm range in order to monitor methanesulfonic acid as an impurity in a drug substance. The validation confirmed the linearity of the method between 1 and 10 mg/l, limits of detection and quantification below 1 mg/l, recovery rates from 92.4 to 95.4%, and repeatability with a R.S.D. of 3.8% (six runs with a 4 mg/l spiked sample). Finally, three batches of a newly produced drug substance could be checked for methanesulfonic acid giving results of below 0.0014% (concentration related to the drug substance).     

Determination of domoic acid by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

An on-line coupled capillary isotachophoresis--capillary zone electrophoresis (cITP-CZE) method for the determination of domoic acid in shellfish and algae is described. The optimised cITP-CZE electrolyte system was 10 mM HCl + 20 mM beta-alanine (BALA) + 0.05% hydroxyethylcellulose (leading electrolyte), 5 mM caproic acid (terminating electrolyte) and 20 mM caproic acid + 20 mM BALA + 0.1% HPMC (background electrolyte). A clear separation of the domoic acid from the other components of methanolic sample extract was achieved within 25 min. Method characteristics, i.e., linearity (0-200 microg/l), accuracy (recovery 101+/-3%), intra-assay repeatability (2.4%) and detection limit (1.5 microg/l) were determined. Speed of analysis, low laboriousness, high sensitivity and low running cost are the typical attributes of the cITP-CZE method. Developed method was successfully applied to analysis of shellfish samples and food supplements containing algae extract.     

Determination of adenosine deaminase activity in human erythrocytes by on-column capillary isotachophoresis-capillary zone electrophoresis in the presence of electroosmotic flow

Transient capillary isotachophoresis (CITP)-capillary zone electrophoresis (CZE) in presence of electroosmotic flow (EOF) was utilized for the measurement of adenosine deaminase activity in human erythrocytes. Phosphates, dominant anions of the sample matrix, were used as leading ions for transient isotachophoresis, and borates (0.3 M, pH 10) were used as terminating ions and background electrolyte for CZE. Final experimental conditions made it possible to inject 70% of the total capillary volume (1.45 microL) with the sample. Enzymatic conversion products (inosine and hypoxanthine), present in the sample in the low-micromolar range, were determined using optimized conditions. The limit of detection was 28 nM using UV detection at 202 nm. The presented data shows that CITP-CZE can be performed in uncoated capillaries in the presence of strong EOF.     

Simultaneous determination of low concentrations of ammonium and potassium ions by capillary type isotachophoresis

Low concentrations of ammonium and potassium ions (<2.0 mg/l.) were determined simultaneously by capillary type isotachophoresis based on the interaction between potassium and 18-crown-6 in the aqueous leading electrolyte. The PU value of potassium ion increased with increasing concentration of 18-crown-6 up to 3mM, whereas that of the ammonium ion remained almost constant. Thus complete separation of ammonium and potassium ions could be obtained by using 1-3mM 18-crown-6. The error in the analysis of mixtures containing ammonium and potassium ions (250-mul sample injection) was less than +/- 20% with a leading electrolyte containing 3mM 18-crown-6. The analysis time was 18 min.     

Concentration cascade of leading electrolyte using bidirectional isotachophoresis

We present a novel method of creating concentration cascade of leading electrolyte (LE) in isotachophoresis (ITP) by using bidirectional ITP. ITP establishes ion-concentration shock waves between high-mobility LE and low-mobility trailing electrolyte (TE) ions. In bidirectional ITP, we set up simultaneous shock waves between anions and cations such that these waves approach each other and interact. The shock interaction causes a sudden decrease in LE concentration ahead of the focused anions and a corresponding decrease in analyte zone concentrations. This readjustment of analyte zone concentrations is accompanied by a corresponding increase in their zone lengths, in accordance to conservation laws. The method generates in situ gradient in the LE concentration, and therefore can be achieved in a single, straight channel simply by establishing the initial electrolyte chemistry. We have developed an analytical model useful in designing the process for maximum sensitivity and estimating increase in sample zone length due to shock interaction. We also illustrate the technique and evaluate its effectiveness in increasing detection sensitivity using transient simulations of species transport equations. We validated the theoretical predictions using experimental visualizations of bidirectional ITP zones for various electrolyte chemistries. Lastly, we use our technique to demonstrate a factor of 20 increase in the sensitivity of ITP-based detection of 2,4,6-trichlorophenol.