Density functional theory studies on the electronic and vibrational spectra of octaethylporphyrin diacid

The ground-state structure and electronic and vibrational spectra of octaethylporphyrin diacid (H4OEP2+) have been studied with the density functional theory. The geometrical parameters computed with B3LYP, PBE1PBE and mPW1PW91 functionals and 6-31G* basis sets are well consistent with the experimental values. Electronic absorption spectrum of H4OEP2+ has been studied with the time-dependent DFT method, and the calculated excitation energies and oscillator strengths are compared with the experimental results. The Raman and IR spectra of H4OEP2+ and the Raman spectrum of its N-deuterated analogue (D4OEP2+) were measured. The observed Raman and IR bands have been assigned based on the frequency calculations at the B3LYP/6-31G* level of theory.     

Density functional theory studies on vibrational and electronic spectra of 2-chloro-6-methoxypyridine

The Fourier transform infrared (FTIR) and FT-Raman spectra of 2-chloro-6-methoxypyridine have been recorded in the range 3700-400 and 3700-100 cm(-1), respectively. The complete vibrational assignment and analysis of the fundamental modes of the compound was carried out using the observed FTIR and FT-Raman data. The vibrational frequencies determined experimentally were compared with the theoretical frequencies computed by DFT gradient calculations (B3LYP method) employing the 6-31G(d,p), cc-pVTZ and/6-311++G(d,p) basis sets for the optimised geometry of the compound. The geometry and normal modes of vibration obtained from the DFT methods are in good agreement with the experimental data. The normal co-ordinate analysis was also carried out using DFT force fields utilising Wilson's FG matrix method. The influence of the substituents bulky chlorine atom and the methoxy group on the spectral characteristics of the compound has been discussed. The electronic spectrum determined by TD-DFT method is compared with the observed electronic spectrum.     

儿茶素结构和振动光谱的密度泛函理论研究

本文利用密度泛函理论方法B3LYP在6-311 G(d,p)水平上研究了儿茶素及其异构体表儿茶素分子的几何构型,计算结果与实验所得结构参数一致.计算了儿茶素分子平衡构型下的力常数,使用Wilson的GF矩阵方法计算了振动基频以及相应的势能分布,据此结合理论计算的光谱强度,对儿茶素分子的振动基频进行了完善合理的理论归属.     

Density functional theory study of vibrational spectra of acridine and phenazine

Density functional theory (DFT) calculations using Becke's exchange in conjunction with Lee-Yang-Parr's correlation functionals (BLYP), Becke's three-parameter hybrid DFT/HF method using Lee-Yang-Parr's correlation functionals (B3LYP) and ab initio Hartree-Fock (HF) method have been carried out to investigate the structure and vibrational spectra of acridine and phenazine. Structural parameters obtained by B3LYP/6-31G* geometry optimization are in good agreement with available experimental data. The raw BLYP non-CH stretching frequencies approximate the experimental results much better than the HF results with the mean absolute deviation about 16 cm(-1). The scaled B3LYP frequencies are more reliable than that of the BLYP and HF methods with the mean absolute deviation about 17 cm(-1). On the basis of the comparison between calculated and experimental results, assignments of fundamental vibrational modes are examined. Also the structure and vibrational frequencies are compared with those of anthracene, pyridine and benzene to study the similarities and differences.     

Density functional theory study on the structure and vibrational spectra for cyanuric chloride

The molecular structure and vibrational spectra of cyanuric chloride have been investigated by density functional theory (DFT) using standard B3LYP/6-31G* and B3LYP/6-311+G** method and basis set combinations. The DFT force field transformed to natural internal coordinates was corrected by a well-established set of scale factors that were found to be transferable to the title compound. Both the calculated structural parameters and vibrational frequencies are in good agreement with the available experimental data.     

Density functional theory study on molecular structure and vibrational IR spectra of isocytosine

Density functional theory with the combined Becke3-LYP exchange-correlation energy functional [DFT(B3-LYP) method] using the 6-31G(d, p) basis set is applied to predict molecular parameters (geometries, rotational constants, dipole moments) and vibrational IR spectra (harmonic wavenumbers, absolute intensities) of six tautomers of the isocytosine molecule. The results are compared with the corresponding data calculated at the conventional ab initio Hartree-Fock (HF) level using the same basis set and with available experimental data. Calculations show that (a) three amino tautomers are slightly nonplanar species with, evidently, a distorted amino group, (b) the DFT (B3-LYP)/6-31G(d, p) method predicts better molecular parameters, than do the HF calculations, and (c) the DFT(B3-LYP)-calculated vibrational IR spectra of isocytosine agree well with the available recorded IR spectra, and they show marked improvement over the IR spectra predicted at the HF/6-31G(d, p) level. Tautomeric stabilities of isocytosine are discussed on the basis of computed electronic energies by the DFT(B3-LYP) and ab initio approaches [including the MP2 and MP4(SDQ) calculations of electronic energies] and predicted zero-point vibrational energies by DFT(B3-LYP) and HF methods. This relative energies at 0 K of the tautomeric forms of isocytosine predicted by both conventional ab initio and DFT(B3-LYP) methods correlate well with the experimental data, showing the predominance of the aminohydroxy tautomer of isocytosine for an isolated molecule. © 1997 John Wiley & Sons, Inc.     

Density functional theory calculations and vibrational spectra of 6-methyl 1,2,3,4-tetrahyroquinoline

The solid phase FTIR and Raman spectra of 6-methyl 1,2,3,4-tetrahydroquinoline (MTHQ) have been recorded in the regions 4000-100 and 3500-100 cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis following a full structure optimization and force field calculations based on the density functional theory (DFT) using the standard B3LYP/6-311+G(**) basis set combination. A close agreement was achieved between the observed and calculated frequencies by refinement of the scale factors.     

Density functional theory study on fundamental vibrational spectra of disilyl iodide and its isotopomer

Density function theory calculations using B3' exchange functional and LYP' correlation functionals (B3LYP) with the 3-21G** basis set were carried out to study the molecular structure and fundamental vibrational frequencies of Si2H5Br, Si2H5I and their isotopomers. One scale factor used to scale Si-H(D) force constants for Si2H5Br is transferred from Si2H5Br to Si2H5I. Other scale factors of force constants for Si2H5I and Si2D5I are determined by a least-squares fitting to experimental vibrational frequencies. The predictions of fundamental vibrational frequencies for Si2H5I and its isotopomer are given. The scaled DFT force fields using B3LYP/3-21G** reproduced the observed fundamental vibrational frequencies of Si2H5I and its deuterium isotopomer with a mean absolute deviation of 6 cm(-1). Reassignment of some fundamental vibrational modes of Si2H5I and its isotopomer is discussed.     

Density functional theory studies on the Raman and IR spectra of meso-tetraphenylporphyrin diacid

The vibrational spectra of meso-tetraphenylporphyrin diacid (H4TPP2+) have been studied with the density functional theory. Raman and IR spectra of H4TPP2+ and its N-deuterated analogue (D4TPP2+) are measured and compared with the computational results. Complete assignments of observed IR and Raman bands were proposed on the bases of calculation results. The DFT calculations reproduce 140 observed fundamentals with the RMS 8.6 cm-1. The computational as well as the experimental results reveal that the saddle-distortion of porphyrin macrocycle for the diacid leads to a significant effect on its vibrational spectra. Especially, several out-of-plane skeletal modes, which were either unobserved or very weak in the Raman spectra of CuTPP and H2TPP, are activated in the Raman spectra of the diacids. In addition, enhancement for the Raman bands of phenyl CC stretching modes were observed and attributed to the conjugation effect of pi-systems of the phenyl and the porphyrinato macrocycles.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of succinimide and N-bromosuccinimide

This work deals with the vibrational spectroscopy of succinimide and N-bromosuccinimide. The mid and far FTIR and FT-Raman spectra were measured in the condensed state. The fundamental vibrational frequencies and intensity of vibrational bands were evaluated using density functional theory (DFT) using standard B3LYP/6-31G(*) and B3LYP/6-311+G(**) methods and basis set combinations. The vibrational spectra were interpreted, with the aid of normal coordinate analysis based on a scaled quantum mechanical force field. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes. Unambiguous vibrational assignment of all the fundamentals were made using the total energy distribution (TED).     

Density functional theory study of vibrational spectra and assignment of fundamental vibrational modes of 1-methyl-4-piperidone

The FT-IR and FT-Raman spectra of 1-methyl-4-piperidone was recorded and the observed bands were interpreted with the aid of normal coordinate analysis following a full structure optimization and force field calculation based on the density functional theory (DFT) using the standard B3LYP/6-311G** method and basis set combinations. A very good agreement obtained between the simulated and experimental spectra was established and unambiguous vibrational assignments of various modes were proposed based on the results of potential energy distribution (PED) calculations.     

Density functional theory calculations and vibrational spectra of 3,5-dibromopyridine and 3,5-dichloro-2,4,6-trifluoropyridine

The solid phase mid FTIR and FT-Raman spectra of 3,5-dibromopyridine (3,5-DBP) and 3,5-dichloro-2,4,6-trifluoropyridine (3,5-DCTFP) have been recorded in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The spectra were interpreted with the help of normal coordinate analysis (NCA) following full structure optimisation and force field calculations based on the density functional theory (DFT) using the standard B3LYP/6-31G( *) method and basis set combination. The results of the calculations are applied to stimulate infrared and Raman spectra of the title compounds which showed excellent agreement with the observed spectra.     

Density functional theory studies on tautomeric stability and infrared spectra of 2-chloroadenine

The tautomeric stability and vibrational IR spectrum of 2-chloroadenine were studied using density functional theory (DFT) at B3LYP/6-31G* level. The amino N(9)H tautomer of 2-chloroadenine was predicted to be most stable. A scaled quantum mechanical (SQM) force field approach was used to calculate the vibrational frequencies of amino N(9)H form of 2-chloroadenine. The force constant scale factors were transferred from those of purine. The mean deviation between the predicted vibrational frequencies and the observed ones is 8.0 cm(-1). The results made it possible to give complete assignments of the IR spectrum of this molecule.     

Density functional theory investigations on the conformational stability and vibrational spectra of the model compound of vitamin K

Becke 3-Lee–Yang–Parr density functional theory (DFT/B3LYP) using 6-31G(d) and 6-311G(d) basis sets and the scaled quantum mechanics (SQM) force field method are used to study molecular conformations and vibrational spectra of a model compound of vitamin K (VK). In this molecule, there are six conformers on the torsional potential energy map of the dihedral angles C₈C₁₄C₁₅C₁₆ () and C₇C₈C₁₄C₁₅ (β). It is shown that the VK_1 conformer ( = 237.7° and β = 274.2°) is the most stable form. For this lowest energy conformer, the harmonic force fields calculated by B3LYP/6-311G(d) and B3LYP/6-31G(d) methods are scaled with one scale factor of 0.9623 and a set of different scale factors transferred from the previous studies for the other similar molecules, respectively. The vibrational frequencies, IR intensities, and Raman activities are obtained for the lowest energy conformer. On the basis of B3LYP calculations, the normal mode analysis is performed to assign the vibrational fundamental frequencies according to the potential energy distributions. The computational frequencies are in good agreement with the observed results.     

Density functional theory and post-Hartree-Fock studies on molecular structure and harmonic vibrational spectrum of formaldehyde

Density functional theory (DFT) with the Becke's three-parameter exchange correlation functional and the functional of Lee, Yang and Parr, gradient-corrected functionals of Perdew, and Perdew and Wang [the DFT(B3LYP), DFT(B3P86) and DFT(B3PW91) methods, respectively], and several levels of conventional ab initio post-Hartree-Fock theory (second- and fourth-order perturbation theory M?ller-Plesset MP2 and MP4(SDTQ), coupled cluster with the single and double excitations (CCSD), and CCSD with perturbative triple excitation [CCSD(T)], configuration interaction with the single and double excitations [CISD], and quadratic configuration interaction method [QCISD(T)], using several basis sets [ranging from a simple 6-31G(d,p) basis set to a 6-311+ +G(3df, 2pd) one], were applied to study of the molecular structure (geometrical parameters, rotational constants, dipole moment) and harmonized infrared (IR) spectrum of formaldehyde (CH₂O). High-level ab initio methods CCSD(T) and QCISD(T) with the 6-311+ +G(3df, 2pd) predict correctly molecular parameters, vibrational harmonic wavenumbers and the shifts of the harmonic IR spectrum of ¹²CH₂ ¹⁶O upon isotopic substitution. Received: 30 January 1997 / Accepted: 7 May 1997     

吲哚分子振动光谱的密度泛函理论研究

用多种密度泛函理论(DFT)方法(BLYP/6-31G^*^*,B3LYP/6-31G^*^*,B3PW91/6-31G^*^*和SVWN/6-31G^*^*)对吲哚分子的平衡几何构型进行了优化。在优化构型的基础上计算了吲哚分子的谐力场、振动基频和红外光谱强度。计算得到的振动频率与实验值比较平均偏差对四种计算方法(BLYP/6-31G^*^*,P3LYP/6-31G^*^*,B3PW91/6-31G^*^*和SVWN/6-31G^*^*)分别为16.3,40.5,45.1和26.4cm^-^1。BLYP/6-31G^*^*理论力场被用于吲哚分子的简正坐标分析计算中。根据振动率的势能分布(PEDs)对此分子的振动基频进行了理论归属。     

Effect of beta-ring rotation on the structures and vibrational spectra of beta-carotene: density functional theory analysis

The effect of beta-ring rotation on the structures and vibrational spectroscopic characteristics of beta-carotene, including infrared (IR) intensities and Raman activities, is analyzed using density functional theory. Two stable isomers having Ci symmetry are obtained. The reversion of bond lengths is ascribed to the hyperconjugation effect. The natural bond orbital (NBO) charge analysis suggests that the NBO charges of C5 can be used to estimate the degree of pi-electron delocalization. These structural variations are used to analyze and assign the vibrational spectra. It is concluded that (a) the similar rotational angle dependencies of nu1 and nu2 frequencies justify the contribution of C=C stretch vibrations to the nu2 mode and explain the same conjugation length dependencies of nu1 and nu2 frequencies in polyenes, (b) the nu1 mode can be assigned to the C=C stretching in the central part of polyene chain, whereas beta-rings play an important role in nu2 and IR1 bands, especially for the all-trans isomer, and (c) the transition dipole moment of the calculated IR1 absorption band is relevant to the conjugation degree and the crossing angle between the eigenvectors of the polyene chain and the C5=C6 stretching vibration. This theoretical analysis, together with our previous Raman spectral experiments, suggests that the C6-C7 bond is easier to be twisted than other parts of beta-carotene molecule and so provides an insight into the structures of carotenoids and the properties of binding sites in carotenoproteins.     

Density functional theory study of vibrational spectra, and assignment of fundamental vibrational modes of 1-bromo 4-fluoronaphthalene

The FTIR and FT-Raman spectra of 1-bromo 4-fluoronaphthalene have been recorded in the regions 4000-100cm(-1) and 3500-100cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis based on DFT (density functional theory) using standard B3LYP/6-311+G** basis set combination for the most optimized geometry. Normal coordinate calculations performed with the DFT force field and subsequently corrected by a recommended set of scale factors, yielded fairly good agreement between observed and calculated frequencies. On the basis of the comparison between calculated and experimental results, assignments of fundamental modes were examined.     

Density functional theory and ab initio studies of geometry, electronic structure and vibrational spectra of novel benzothiazole and benzotriazole herbicides

The ground-state geometries, electronic structures and vibrational wavenumbers of S-1,3-benzothiazolyl-4-bromobenzenecarbothioate and S-(5,7-dimethyl-3H-4lambda-5-[1,2,4]triazolo[1,5-a]pyridinyl)4-chlorobenzenecarbothioate were studied by DFT-B3LYP, BLYP and ab initio RHF method with different basis sets. The comparison was performed for optimized geometries, thermodynamic parameters and electronic structures at different levels of theory. Because of the larger repulsion effect in triazole ring, the vibrational wavenumbers of skeleton vibration of triazole ring are significantly lower than that of thiazole ring.     

Density functional theory study on the structure and vibrational frequencies of glycylglycine

Eleven possible conformers of glycylglycine have been studied by using the BLYP, B3LYP methods of density functional theory and the HF method at the basis set of 6-311++G**. BLYP (using Becke's and Lee-Yang-Parr's correlation functionals), ab initio Hartree-Fock (HF) and hybrid DFT/HF B3LYP calculations have been carried out to study the structure and vibrational spectra of glycylglycine. Glycylglycine crystal structure has been determined by X-ray diffraction analysis. The title compound has been crystallizes in the orthorhombic space group C1, with Z=4. And the unit cell parameters are: a=8.1184(12)A, b=9.5542(14)A, c=7.8192(11)A and V=577.95(15)A(3). Molecular conformation calculations have got 11 possible conformers. In these possible conformers, the most stable one has been selected. The BLYP/6-311++G** and scaled HF/6-311++G** frequencies correspond well with available experimental assignments of the normal vibrational modes. Comparison of the observed fundamental vibrational frequencies of glycylglycine and calculated results by density functional B3LYP and Hartree-Fock (HF) methods indicates that B3LYP is superior to the scaled Hartree-Fock (HF) for molecular vibrational issues.