Rhodium(I)-Catalyzed Bridged [5+2] Cycloaddition of cis-Allene-vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis-ene-vinylcyclopropanes (cis-ene-VCPs) underwent Rh-catalyzed [5+2] reaction to give 5,7-fused bicyclic products, where vinylcyclopropane (VCP) acts as five-carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis-ene-VCPs to allene moiety, the corresponding cis-allene-VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7-fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Mechanistic twist of the [8+2] cycloadditions of dienylisobenzofurans and dimethyl acetylenedicarboxylate: stepwise [8+2] versus [4+2]/[1,5]-vinyl shift mechanisms revealed through a theoretical and experimental study

Recently, it was reported that both dienylfurans and dienylisobenzofurans could react with dimethyl acetylenedicarboxylate (DMAD) to give [8+2] cycloadducts. Understanding these [8+2] reactions will aid the design of additional [8+2] reactions, which have the potential for the synthesis of 10-membered and larger carbocycles. The present Article is aimed to understand the detailed mechanisms of the originally reported [8+2] cycloaddition reaction between dienylisobenzofurans and alkynes at the molecular level through the joint forces of computation and experiment. Density functional theory calculations at the (U)B3LYP/6-31+G(d) level suggest that the concerted [8+2] pathway between dienylisobenzofurans and alkynes is not favored. A stepwise reaction pathway involving formation of a zwitterionic intermediate for the [8+2] reactions between dienylisobenzofurans that contain electron-donating methoxy groups present in their diene moieties and DMAD has been predicted computationally. This pathway is in competition with a Diels-Alder [4+2] reaction between the furan moieties of dienylisobenzofurans and DMAD. When there is no electron-donating group present in the diene moieties of dienylisobenzofurans, the [8+2] reaction occurs through an alternative mechanism involving a [4+2] reaction between the furan moiety of the tetraene and DMAD, followed by a [1,5]-vinyl shift. This computationally predicted novel mechanism was supported experimentally.     

合成文拉法星的2-氮杂-1,3-丁二烯杂Diels-Alder反应与其 单分子环合竞争反应的研究

研究了不同的Lewis酸催化剂、温度、微波等条件下, 4-(4-甲氧苯基)-1-苯基-3-三甲基硅氧基-2-氮杂-1,3-丁二烯(2-ABDE)和亲二烯体环己酮发生杂Diels-Alder反应生成[4＋2]的六元环合产物噁嗪酮衍生物, 伴随的2-ABDE的 [2＋2]单分子环合, 生成单环β-内酰胺衍生物. 结果表明: 在低温条件下如(－78 ℃)[4＋2]反应占主导; 而在高温条件下(如135 ℃)仅进行[2＋2]反应. 微波加热方式可显著提高[2＋2]反应的速率和产率. 不同的Lewis酸催化剂对[2＋2]反应和[4＋2]反应的催化效率不同. Lewis酸的酸性强弱、软硬对2-ABDE的[2＋2]反应的催化能力起决定性作用.     

Reaction mechanism and chemoselectivity of intermolecular cycloaddition reactions between phenyl-substituted cyclopropenone ketal and methyl vinyl ketone

In this paper, the mechanisms of the intermolecular [3+2] and [1+2] cycloaddition reactions of 1,1/1,3-dipolar π-delocalized singlet vinylcarbenes, which is obtained from cyclopropenone, with an electron-deficient C═O or C═C dipolarophile, to generate five-membered ring products are first disclosed by the density functional theory (DFT). Four reaction pathways, including two concerted [3+2] cycloaddition reaction pathways and two stepwise reaction pathways (an initial [1+2] cycloaddition and then a rearrangement from the [1+2] cycloadducts to the final [3+2] cycloadducts), are investigated at the B3LYP/6-31G(d,p) level of theory. The calculated results reveal that, in contrast to the concerted C═O [3+2] cycloaddition reaction pathway, which is 7.1 kcal/mol more energetically preferred compared with its stepwise reaction pathway, the C═C dipolarophile favors undergoing [1+2] cycloaddition rather than concerted [3+2] cycloaddition (difference of 5.3 kcal/mol). The lowest free energy barrier of the C═O concerted [3+2] cycloaddition reaction pathway shows that it predominates all other reaction pathways. This observation is consistent with the finding that the C═O [3 + 2] cycloadduct is the main product under experimental conditions. In addition, natural bond orbital second-order perturbation charge analyses are carried out to explain the preferred chemoselectivity of C═O to the C═C dipolarophile and the origins of cis-stereoselectivity for C═C [1+2] cycloaddition. Solvent effects are further considered at the B3LYP/6-31G(d,p) level in the solvents CH(3)CN, DMF, THF, CH(2)Cl(2), toluene, and benzene using the PCM model. The results indicate that the relative reaction trends and the main products are insensitive to the polarity of the reaction solvent.     

Quantum mechanical inspection of the Diels-Alder approach to biaryls mechanism

The Diels-Alder reaction of substituted cyclohexadienes with substituted phenylacetylenes offers an attractive alternative for the synthesis of biaryl compounds via a two-step cycloaddition/cycloelimination pathway. Quantum mechanical calculations using B3LYP and M06-2X density functional methods for the reaction of 2-chloro-6-nitrophenylacetylene with 1-carbomethoxy-cyclohexadiene show the reaction proceeds by a stepwise diradical [4+2] cycloaddition followed by concerted [2+4] cycloelimination of ethylene. [2+2] cycloadducts are also the result of stepwise addition. [2+2] cycloadducts isomerize to [4+2] cycloadducts via diradical pathways, which involve the same diradical intermediate in cycloaddition. There is also a competitive conrotatory ring opening followed by trans-cis double bond isomerization pathway of the [4.2.0] bicycle (the [2+2] cycloadduct) to give the cis,cis,cis-1,3,5-cyclooctatriene.     

Rhodium(I)‐Catalyzed Bridged [5+2] Cycloaddition of cis‐Allene‐vinylcyclopropanes to Synthesize the Bicyclo[4.3.1]decane Skeleton

Previously reported was that cis‐ene‐vinylcyclopropanes (cis‐ene‐VCPs) underwent Rh‐catalyzed [5+2] reaction to give 5,7‐fused bicyclic products, where vinylcyclopropane (VCP) acts as five‐carbon synthon. Unfortunately, this reaction had very limited scope. Replacing the 2π component of cis‐ene‐VCPs to allene moiety, the corresponding cis‐allene‐VCPs did not undergo the expected normal [5+2] cycloaddition to give 5,7‐fused bicyclic products. Instead, the challenging bicyclo[4.3.1]decane skeleton was obtained via an unprecedented bridged [5+2] cycloaddition. DFT calculations were applied to understand why this bridged [5+2] reaction is favored over the anticipated but not realized normal [5+2] reaction.     

Theoretical studies of spin state‐specific [2 + 2] and [5 + 2] photocycloaddition reactions of n‐(1‐penten‐5‐yl)maleimide

N‐alkenyl maleimides are found to exhibit spin state‐specific chemoselectivities for [2 + 2] and [5 + 2] photocycloadditions; but, reaction mechanism is still unclear. In this work, we have used high‐level electronic structure methods (DFT, CASSCF, and CASPT2) to explore [2 + 2] and [5 + 2] photocycloaddition reaction paths of an N‐alkenyl maleimide in the S₁ and T₁ states as well as relevant photophysical processes. It is found that in the S₁ state [5 + 2] photocycloaddition reaction is barrierless and thus overwhelmingly dominant; [2 + 2] photocycloaddition reaction is unimportant because of its large barrier. On the contrary, in the T₁ state [2 + 2] photocycloaddition reaction is much more favorable than [5 + 2] photocyclo‐addition reaction. Mechanistically, both S₁ [5 + 2] and T₁ [2 + 2] photocycloaddition reactions occur in a stepwise, nonadiabatic means. In the S₁ [5 + 2] reaction, the secondary C atom of the ethenyl moiety first attacks the N atom of the maleimide moiety forming an S₁ intermediate, which then decays to the S₀ state as a result of an S₁ → S₀ internal conversion. In the T₁ [2 + 2] reaction, the terminal C atom of the ethenyl moiety first attacks the C atom of the maleimide moiety, followed by a T₁ → S₀ intersystem crossing process to the S₀ state. In the S₀ state, the second C C bond is formed. Our present computational results not only rationalize available experiments but also provide new mechanistic insights. © 2017 Wiley Periodicals, Inc.     

MnZSM-5催化剂上NH3-SCR反应机理的研究

通过密度泛函理论（DFT）对Mn/ZSM-5催化剂上NH3-SCR反应机理进行了理论研究。一种为气态NO直接参与反应的E-R机理,NO分子与[NH2]反应生成中间体[NH2NO],该反应路径的能垒为43.35 kcal/mol;另一种为吸附态NO参与反应的L-H机理,[NO]与[NH3]反应生成[NH2NO],该反应路径的能垒为44.73 kcal/mol。因两种机理的反应能垒相差不大,因此在一定温度下遵循两种机理的反应皆能进行。     

Intermolecular hydrophosphination of alkynes and related carbon[bond]carbon multiple bonds catalyzed by organoytterbiums

Intermolecular hydrophosphination of alkynes with diphenylphosphine is catalyzed by a Yb[bond]imine complex, [Yb(eta(2)-Ph(2)CNPh)(hmpa)(3)], to give alkenylphosphines and phosphine oxides after oxidative workup in good yields under mild conditions. This reaction is also applicable to various carbon[bond]carbon multiple bonds such as conjugated diynes and dienes, allenes, and styrene derivatives. Regio- and stereoselectivity and the scope and limitation of the present reaction clearly differ from those of the corresponding radical reaction. Instead, the reaction takes place through insertion of alkynes to a Yb[bond]PPh(2) species, followed by protonation. In fact, the Yb[bond]phosphido complex, [Yb(PPh(2))(2)(hmpa)(3)], is obtained from the imine complex and phosphine, which exhibits similar catalyst activity for the hydrophosphination. The empirical rate law is nu = k[catalyst](2) [alkyne](1)[phosphine](0) at least under the standard conditions.     

Heterocyclizations with tosylmethyl isocyanide derivatives. A new approach to substituted azolopyrimidines

An efficient synthesis of substituted azolopyrimidines such as pyrido[3',2':4,5]pyrrolo[1,2-c]pyrimidines, pyrimido[1,6-a]indoles, benzo[4,5]imidazo-[1,2-c]pyrimidines, an imidazo[1,2-c]pyrimidine, and pyrazolo[1,5-c]pyrimidines is described. The method involves the reaction of N-protected bromomethylazoles and tosylmethyl isocyanide (TosMIC) derivatives in nonanhydrous media. The study of the reaction conditions shows that the method is only successful under phase-transfer conditions (CH2Cl2/30% aq NaOH) using benzyltriethylammonium chloride as a catalyst.     

Strain-Induced Ring Expansion Reactions of Calix[3]pyrrole-Related Macrocycles

The recent discovery of calix[3]pyrrole, a porphyrinogen-like tripyrrolic macrocycle, has provided an unprecedented strain-induced ring expansion reaction into calix[6]pyrrole. Here, we synthesized calix[n]furan[3-n]pyrrole (n=1∼3) macrocycles to investigate the reaction scope and mechanism of the ring expansion. Single crystal X-ray analysis and theoretical calculations revealed that macrocyclic ring strain increases as the number of inner NH sites increases. While calix[1]furan[2]pyrrole exhibited almost quantitative conversion into calix[2]furan[4]pyrrole within 5 minutes, less-strained calix[2]furan[1]pyrrole and calix[3]furan were inert. However, N-methylation of calix[2]furan[1]pyrrole induced a ring-expansion reaction that enabled the isolation of a linear reaction intermediate. The mechanism analysis revealed that the ring expansion consists of regioselective ring cleavage and subsequent cyclodimerization. This reaction was further utilized for synthesis of calix[6]-type macrocycles.     

Functionalization of diamond (001)‐2 × 1 surface by cycloaddition of 1,3‐cyclohexadiene: A theoretical study

Density functional theory calculations have been used to study [4 + 2] and [2 + 2] cycloaddition reaction between 1,3‐cyclohexadiene and diamond (001)‐2 × 1 surface. The calculations revealed four possible reaction pathways for 1,3‐cyclohexadiene with the surface dimmers of diamond. Full geometry‐optimized structures were obtained for all products, including intradimer and interdimer reaction products. These results were analyzed both in terms of the total energy values and the detailed optimized geometries. We found that the intradimer [4 + 2] product is energetically favored over the other products, and the barrier to intradimer [4 + 2] addition is lower than the other additions, so the intradimer [4 + 2] product is expected to be the dominant product on the surface. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Stereoselective [3+2] Carbocyclization of Indole‐Derived Imines and Electron‐Rich Alkenes: A Divergent Synthesis of Cyclopenta[b]indole or Tetrahydroquinoline Derivatives

An unprecedented stereoselective [3+2] carbocyclization reaction of indole‐2‐carboxaldehydes, anilines, and electron‐rich alkenes to obtain cyclopenta[b]indoles is disclosed. This pathway is different from the well‐established Povarov reaction: the formal [4+2] cycloaddition involving the same components, which affords tetrahydroquinolines. Moreover, by simply changing the Brønsted acid catalyst, this multicomponent coupling process could be divergently directed towards the conventional Povarov pathway to produce tetrahydroquinolines or to the new pathway (anti‐Povarov) to generate cyclopenta[b]indoles. Supported by computational studies, a stepwise Mannich/Friedel–Crafts cascade is proposed for the new anti‐Povarov reaction, whereas a concerted [4+2] cycloaddition mechanism is proposed for the Povarov reaction.     

Rhodium N-heterocyclic carbene-catalyzed [4 + 2] and [5 + 2] cycloaddition reactions

[reactions: see text] A rhodium complex of N-heterocyclic carbene (NHC) has been developed for intra- and intermolecular [4 + 2] and intramolecular [5 + 2] cycloaddition reactions. This is the first use of a transition-metal NHC complex in a Diels-Alder-type reaction. For the intramolecular [4 + 2] cycloaddition reactions, all the dienynes studied were converted to their corresponding cycloadducts in 91-99% yields within 10 min. Moreover, up to 1900 turnovers have been obtained for the intramolecular [4 + 2] cycloaddition at 15-20 degrees C. For the intermolecular [4 + 2] cycloadditions, high yields (71-99%) of the corresponding cycloaddition products were obtained. The reaction time and yield were highly dependent upon the diene and the dienophile. For the intramolecular [5 + 2] cycloaddition reactions, all the alkyne vinylcyclopropanes studied were converted to their corresponding cycloadducts in 91-98% yields within 10 min. However, the catalytic system was not effective for an intermolecular [5 + 2] cycloaddition reaction.     

TeSe3]2- and [TeSe2]2- as synthons

The [Au2(TeSe2)2]2- anion has been prepared from the reaction of [TeSe3]2- with AuCN in DMF in the presence of PEt3 and from the reaction of [TeSe2]2- with AuCN in DMF. Reaction of [TeSe2]2- with AuCN in DMF in the presence of PEt3 leads ultimately to the [Au2(Te2)2]2- anion.     

含金属基团的四价锡化合物的合成和取代反应动力学

通式为[Fe(CO)~2Cp]~2Sn(Ar)Cl的化合物为一组新的化合物,由[Fe(CO)~2Cp]~2SnCl2与AgMgX反应合成.[Fe(CO)~2Cp]~2Sn(Ar)Cl与各种亲核试剂Y发生取代反应给出另一组新的化合物[Fe(CO)~2Cp]~2Sn(Ar)Y,其中[Fe(CO)~2Sn(p-MeC~6H~4)Br经X射线衍射分析确定结构.[Fe(CO)~2Cp]~2Sn(1,3,5-Me~3C~6H~3)Cl与NAS~2CNMe~2或KSCN在不同溶剂中的反应动力学表明,由于锡易形成高配位中间体,尽管锡上两个较大的金属基团带来一定空间障碍,反应仍主要按SN2机理进行.     

Solid-phase synthesis of pyridones and pyridopyrazines as peptidomimetic scaffolds

[formula: see text] We report the syntheses of peptidomimetic opioids containing the core structure N-alkyl-2-alkyl-2,3-dihydro-4-pyridone. By employing imines bound on a solid support and the Danishefsky diene, this [4 + 2] cyclocondensation reaction facilitates the synthesis of novel complex heterocycles. The central reaction is carried out under mild conditions and employs readily available building blocks. In this study we demonstrate the suitability of N-alkyl-2-alkyl-2,3-dihydro-4-pyridones as a central scaffold for peptidomimetics and establish the scope of this [4 + 2] cyclocondensation reaction with imino acids on a solid phase. We also combine the synthesis of diketopiperazines with the [4 + 2] cyclocondensation reaction to form a 9,9a-dihydro-2H-pyrido-[1,2a]- pyrazine-3,8(1,4-dialkyl)dione, a bicyclic molecule containing a pyridopyrazine core structure.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

The versatile chemistry of the [B20H18]2- ions: novel reactions and structural motifs

Among the polyhedral [closo-BnHn]2- ion series (n = 5-12 inclusive) the aromatic [closo-B10H10]2- ion is both readily available and quite reactive. Among its many reactions which retain its cage structure one finds the oxidative dimerization reaction in which two [closo-B10H12]2- ions each formally lose a hydride ion and undergo dimerization of the resulting [closo-B10H9]- ions to produce the [trans-B20H18]2- ion. The two-component [closo-B10H9]- ions of the latter are linked together by a pair of unique B-B-B bonds which provide unprecedented reactivity to the structure. Among these reactions are the two-electron reduction to a set of three interconvertible [B20H18]4- ions having intercage B-B bonds and the related reductive substitution reaction in which [trans-B20H18]2- undergoes attack by nucleophile, L, to produce [B20H18L]2-. The latter species is formally a substituted [B20H19]3- (L = H) ion formed by B-B bond protonation of one of the isomeric [B20H18]4- ions. These and a variety of novel reactions are described here along with interrelated reaction mechanisms considered for the first time.     

Trityl isothiocyanate support for solid-phase synthesis

Trityl isothiocyanate resin [1], prepared from commercially available trityl chloride resin, is a useful precursor of the trityl thiosemicarbazide resin [2]. This resin can be employed in the solid-phase synthesis of a variety of supported isatin beta-thiosemicarbazones [4] and their Mannich derivatives [6]. A variety of thioureas [7] can be easily prepared by the reaction of [1] with amines. The supported thioureas are directly and efficiently converted to 2-aminothiazole-5-carboxylates [8] by reaction with methyl 2-chloroacetoacetate.