Low‐band gap copolymers containing thienothiadiazole units: Synthesis,optical, and electrochemical properties

Novel low‐band gap alternating copolymers consisting of 9,9‐bis(2‐ethylhexyl)fluorene and 4,6‐di(2‐thienyl)thieno[3,4‐c][1,2,5]thiadiazole and its 3,3″‐dialkyl derivatives were synthesized by Suzuki copolymerization reaction, and their photophysical and electrochemical properties were studied. The copolymers possess small optical band gap 1.3–1.4 eV. The absorption covers the whole visible spectral region. The long‐wavelength absorption maxima in thin films located at approximately 750–785 nm are significantly red shifted compared with those in solution, indicating strong intermolecular interactions. The introduction of alkyl chains to the thiophene units increases the molecular weights of soluble fractions and solubility of the final copolymers, leading to the improved processability of thin films. Polymer solutions exhibited solvatochromism and thermochromism, which is strongly supported by the involvement of the alkyl chains. The copolymers exhibited ambipolar redox properties and reversible electrochromic behavior. The electronic properties are influenced only slightly by alkyl substituents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2743–2756, 2010     

Synthesis of polymers containing donor-acceptor Schiff base in side chain for nonlinear optics

The Schiff bases 4-(ω-hydroxyalkyloxy)-N-(5-nitro-2-thienylmethylene)aniline with 2, 6 and 8 methylenic units in their alkyl group in which a nitrothienyl group as acceptor and an oxyphenyl group as donor were synthesized by condensation of (ω-hydroxyalkyloxy)anilines with 5-nitro-2-thiophenecarboxaldehyde. The methacrylate monomers 4-(ω-methacryloyloxyalkyloxy)-N-(5-nitro-2-thienylmethylene)aniline with alkylene groups of different lengths were synthesized by two different routes and polymerized using a free radical initiator to produce low molecular weight polymers useful for nonlinear optics. All the obtained compounds were characterized by conventional spectroscopic methods. First-order hyperpolarizability (β) of 4-(2-hydroxyethyloxy)-N-(5-nitro-2-thienylmethylene)aniline typically was calculated using semiempirical method and the nonlinear optic properties of the same compound was studied by second harmonic generation.     

Synthesis and applications of polymers containing metallacyclopentadiene moieties in the main chain

Organometallic polymers containing metallacycles in the main chain were prepared by the reactions of diynes with low-valent organometallic complexes such as CpCo(PPh₃)₂, CP₂Ti(CH₂=CHC₂H₅), and (ⁱPrO)₂Ti(CH₂=CHCH₃). Their polymer reactions involving the conversion of the main chain structures gave rise to polymers containing functional groups in their main chain repeating units. Design and synthesis of organometallic polymers that potentially serve as novel functional materials are also described.     

Synthesis and properties of thermally cross-linkable main-chain azobenzene polymers containing diacetylene moieties

A series of main chain azobenzene polymers containing diacetylene moieties with different lengths of the spacer {-[CC-CH₂-O-C₆H₄-OCO-(CH₂)_m-O-C₆H₄-NN-C₆H₄-O-(CH₂)_m-OCO-C₆H₄-O-CH₂-CC]_n-, where m = 3, 6, 11} were synthesized by oxidative coupling polymerization. These polymers had molecular weights of 17,600-68,600 and polydispersity indices of 1.2-1.8 as determined by gel permeation chromatography using polystyrene as a standard. Their structures and properties were characterized and evaluated with NMR, FT-IR, X-ray diffraction (XRD), thermogravimetry (TG), differential scanning calorimetry (DSC) and nonlinear optical (NLO) analyses. All the polymers could be cross-linked at the elevated temperatures due to the polymerization reactions of the diacetylene groups in the polymer backbone, and the cross-linked polymers showed dramatically modified properties, such as thermal stability and solvent resistance. The third-order nonlinear susceptibilities of the cross-linked polymers were evaluated by means of the Z-scan technique and calculated to be 3.60 × 10⁻⁹, 2.73 × 10⁻⁹, 2.28 × 10⁻⁹ esu, respectively, whereas the un-cross-linked polymers showed no obvious NLO property.     

Synthesis,processing, and third-order nonlinear optical properties of benzobisthiazole polymers containing thiophene moieties

Benzobisthiazole polymers containing mono-, bi-, and terthiophene moieties were synthesized through polycondensation in polyphosphoric acid of 2,5-diamino-1,4-benzenedithiol dihydrochloride with thiophene-2,5-dicarboxylic acid, 2,2′-bithiophene-5,5′-dicarboxylic acid, and 2,2′:5′,2″-terthlophene-5,5″-dicarboxylic acid, or their corresponding diacid chlorides, respectively. Intrinsic viscosities of up to 8.1 dL/g (methanesulfonic acid, 30°C) were recorded. Polymer structures were verified by elemental analysis and spectroscopic comparison of the polymers with appropriate model compounds. Onset of breakdown under thermogravimetric analysis in air occurred in the 460–590°C range with the benzobisthiazole polymers containing a monothiophene linkage being the most stable. Films suitable for third-order optical susceptibility measurements could be prepared by extrusion techniques from the benzobisthiazole polymer containing a monothiophene linkage. Degenerate four wave mixing measurements on this film yielded a third order optical susceptibility χ⁽³⁾ of approximately 4.5 × 10^?10 esu. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of acceptor-donor-acceptor molecules based on oligothiophenes with tunable and low band gap

A series of acceptor-donor-acceptor molecules (DCN3T, DCN5T and DCN7T) based on oligothiophenes with low band gap are synthesized. The UV-vis absorption spectra of solution show that the introduction of electron-accepting groups results in a shift of the absorption onset towards longer wavelengths. Moreover, the optical spectra of their films show a large bathochromic shift and broadening of the bands with respect to the spectra in solution. The optical band gaps of film of these A-D-A molecules are 1.90, 1.74 and 1.68 eV, respectively. Cyclic voltammetry shows that all these compounds present a reversible first oxidation process whose potential decreases with the lengthening of oligothiophene cores. Electrochemical band gaps are 2.14, 1.88 and 1.71 eV, respectively.     

Synthesis and properties of new polybenzoxazines containing (substituted) cyclohexyl moieties

A series of new polybenzoxazines were synthesized based on diphenols containing (substituted) cyclohexyl moiety and were characterized by FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. These new benzoxazine monomers exhibited better processability with lower peak cure temperature and a wide cure controllable window (CCW) as manifested in differential scanning calorimetric analysis. The cure analysis was performed by FT‐IR spectroscopy. Glass transition temperature of new polybenzoxazines varied from 170 to 205°C. The cyclohexyl bridge groups facilitated ring opening, resulting in polymer with improved thermal stability in comparison to bisphenol A‐based benzoxazine as assessed by the various thermal analyses. The water contact angles of polybenzoxazines containing (substituted) cyclohexyl moieties were higher than that of bisphenol A‐based polybenzoxazine, implying their higher hydrophobicity. Copyright © 2009 John Wiley & Sons, Ltd.     

Structural tuning of low band gap intermolecular push/pull side-chain polymers for organic photovoltaic applications

A series of novel low band gap donor-acceptor (D-A) type organic co-polymers (BT-F-TPA,BT-CZ-TPA and BT-SI-TPA) consisting of electron-deficient acceptor blocks both in main chains (M1) and at the pendant (M2) were polymerized with different electron rich donor (M3-M5) blocks,i.e.,9,9-dihexyl-9H-fluorene,N-alkyl-2,7-carbazole,and 2,6-dithinosilole,respectively,via Suzuki method.These polymers exhibited relatively low band gaps (1.65-1.88 eV) and broad absorption ranges (680-740 nm).Bulk heterojunction (BHJ) solar cells incorporating these polymers as electron donors,blended with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) or [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as electron-acceptors in different weight ratios were fabricated and tested under 100 mW/cm2 of AM 1.5 with white-light illumination.The photovoltaic device containing donor BT-SI-TPA and acceptor PC71BM in 1:2 weight ratio showed the best power conversion efficiency (PCE) value of 1.88％,with open circuit voltage (Voc) =0.75 V,short circuit current density (Jsc) =7.60 mA/cm2,and fill factor (FF) =33.0％.     

Synthesis and properties of wholly aromatic polymers bearing cardo fluorene moieties

Three series of aromatic polyamides, polyesters, and poly(1,3,4‐oxadiazole)s containing bulky fluorene structures were prepared from 9,9‐bis(4‐carboxyphenyl) fluorene. All of the polymers were readily soluble in many organic solvents and showed useful thermal stability associated with high glass‐transition temperatures in the range of 220–366 °C. These wholly aromatic polymer films were colorless, with high optical transparency, and exhibited UV‐vis absorption bands at 266–348 nm and photoluminescence maximum bands at 368–457 nm within the purple to green region in N,N‐dimethylacetamide (DMAc) solutions. The poly(amine‐amide) Ic exhibited excellent electrochromic contrast and coloration efficiency, changing color from the colorless neutral form to green and then to the dark blue oxidized forms with good stability of electrochromic characteristics. Almost all of these wholly aromatic polymer films were colorless and showed high optical transparency. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4352–4363, 2007     

Synthesis,characterization, and water sorption properties of new aromatic polyamides containing benzimidazole and ethylene oxide moieties

New polyamides, containing a benzimidazole side group and ethylene oxide moieties in the structural repeat unit, were synthesized by low‐temperature polycondensation. The aim of this design was to obtain polyamides that were more soluble in common organic solvents and hence had better processability than benzimidazole polyamides while maintaining the water sorption properties characteristic of the latter. The results showed that the number of ether linkages of the repeat unit played an important role in the glass‐transition temperature and in the water sorption properties, the polyamides with one or two ethylene oxide units being more hydrophilic than benzimidazole polyamides. However, the length of the ethylene oxide chain played a minor role in the solubility because the second member of the series, with two ether linkages (i.e., one ethylene oxide unit), reached the same level of solubility as those polyamides with more ethylene oxide moieties. No crystallinity was observed by X‐ray and calorimetric measurements for the new polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 112–121, 2005     

Water‐soluble conjugated polymers: Synthesis and optical properties

Two sets of water‐soluble poly(phenylene vinylene)s were synthesized and their optical properties were studied. The aqueous solubility of all these polymers is rendered by pendant sulfonate groups. One set of polymers (polymer I series) contains, in addition to the sulfonate pendants, dimethoxy substituents, while the other (polymer II series) contains oligo(ethylene oxide) side chains. Within each set, polymers containing lithium (Ia and IIa), sodium (Ib and IIb), and potassium (Ic and IIc) counter ions were prepared. The two sets of polymers showed different properties from physical appearance (fiber vs film) to thermal properties and to optical properties. It was found that set I polymers, with shorter side chains, exhibit stronger aggregation in aqueous solutions than set II polymers, which led to their lower fluorescence quantum yields and lower polymer‐to‐MV²⁺ quenching efficiencies. Within each set, the effect of counter ions on optical properties was noted. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5123–5135, 2007     

Synthesis and polymerization of new styryl and methacryloyl monomers containing acidic saccharide moieties

New styryl‐type water‐insoluble and methacryloyl‐type water‐soluble monomers, N‐(p‐vinylbenzyl)‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide and N‐(2‐methacryloylamino)ethyl‐1,2‐O‐isopropylidene‐6‐D ‐glucofuranuronamide, were synthesized from the most common acidic saccharide, D ‐glucuronic acid. Their radical homopolymerizations and copolymerizations with styrene and acrylamide were tried under various conditions. The isopropylidene groups in the resulting polymers were removed in a mixture of trifluoroacetic acid and water (2/1 v/v) to give the corresponding polymers with many pendant D ‐glucopyranuronyl groups with reactive reducing groups. The pendant reducing ends may be useful as potential binding sites under a hydrophilic atmosphere. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3893–3901, 2001     

Synthesis and characterization of chelate polymers containing etheric diphenyl ring in the backbone: thermal,optical, electrochemical,and morphological properties

A novel Schiff base, 4‐bromo‐2‐[(2‐[(5‐bromo‐2‐hydroxyphenyl)methylene]amino‐5‐nitrophenyl)iminomethyl]phenol (M1) was synthesized from the reaction of 5‐brom‐salicylaldehyde with 4‐nitro‐o‐phenylenediamine. Schiff base–metal complex was synthesized from the reaction of 4‐bromo‐2‐[(2‐[(5‐bromo‐2‐ hydroxyphenyl)methylene]amino‐5‐nitrophenyl)iminomethyl]phenol (M1) with copper (II) acetate monohydrate [(CH₃COO)₂ Cu · H₂O] salt. Poly‐ (M1‐Cu‐TDP) was synthesized from the reaction of M1‐Cu with 4,4′‐dithiodiphenol (TDP). Poly(M1‐Cu‐PDP) was synthesized from the reaction of M1‐Cu with 4,4′‐propane‐2,2‐diyldiphenol (PDP). Poly(M1‐Cu‐HDP) was synthesized from the reaction of M1‐Cu with 4,4′‐(1,1,1,3,3,3‐hexafluoropropane‐2,2‐di‐yl)diphenol (HDP). The structures of the synthesized monomer and chelate polymers were confirmed by FT‐IR, UV–Vis, ¹H‐ and ¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, DSC, size exclusion chromatography, cyclic voltammetry, and solubility tests. Also, surface morphologies of chelate polymers were investigated by scanning electron microscope. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and electrochromic properties of a new family of methacrylate polymers containing pendant oligothiophenes

A new family of methacrylate polymers containing pendant terthiophene, quaterthiophene, quinquethiophene, and sexithiophene was synthesized by the radical polymerization of the corresponding methacrylate monomers, and the electrochemical and electrochromic properties were investigated. The anodic oxidation of these polymers in the presence of tetra‐n‐butylammonium perchlorate as a supporting electrolyte produced radical‐cation salts of pendant oligothiophenes with ClO as a dopant. The electrochemically oxidized polymers had partially crosslinked structures resulting from the coupling reaction of pendant oligothiophene radical cations, the extent of crosslinking significantly decreasing with the increasing conjugation length of the pendant oligothiophenes. Comparative spectroelectrochemical studies of the monomers in solution and the polymers as solid films showed that π‐dimer formation of oligothiophene radical cations took place more readily for the polymer films than for the monomers in solution. This new family of methacrylate polymers containing pendant oligothiophenes constitutes a new class of potential electrochromic materials, undergoing reversible, clear color changes on electrochemical oxidation and reduction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2471–2484, 2003     

Synthesis of new molecules containing head,spacer, and label moieties

We describe the synthesis and characterization of novel molecules containing head with precise shape, spacer, and label moieties. The protocol is based on a Pd(0)-catalyzed cross-coupling reaction between ethynylphenyl/bromide to obtain a rigid head followed by the attachment of a flexible spacer possessing two reactive functional groups on the termini. The final step consists of forming a covalent bond between spacer and label. In addition, monosubstituted soluble labels were synthesized in good yields.     

A red emissive donor-acceptor fluorophore as protein sensor: Synthesis,characterization and binding study

The rational design of environmentally sensitive small molecule fluorophores with superior photophysical properties is critical for fluorimetry based biosensing. Herein, we have developed a new donor-acceptor fluorophore for quantitative detection of Human Serum Albumin (HSA) in aqueous samples. The fluorophore was easily prepared by Knoevenagel condensation, and showed excellent photophysical properties and positive solvatochromism. The design of the fluorophore was based on a nitrogen donor—π-conjugation—nitrile acceptors (D—π—A) to preserve efficient intramolecular charge transfer and long-wavelength emission. The fluorophore showed remarkable “turn-on” fluorescence in presence of HSA, which led to quantitative determination of the protein in aqueous buffer samples. Structure and electronic properties of the fluorophore played important roles on the superior HSA sensing ability. The findings indicate that minor changes in design strategy can be advantageous while developing long-wavelength (far red or near infrared) emitting fluorophores for biosensing and bioimaging.     

Synthesis and characterization of new cholesteric monomers and smectic polymers containing menthyl groups

New cholesteric monomers (M₂−M₅) and the corresponding smectic homopolymers (P₂−P₅) based on menthyl groups were synthesized. The chemical structures were characterized by Fourier transform infrared and ¹H NMR. The specific optical rotations were evaluated with a polarimeter. The structure–property relationships of the new compounds are discussed. The mesomorphism was investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction. The selective reflection property of light was studied with UV/Visible/NIR. The monomers M₂−M₅ formed the cholesteric or blue phase when a flexible link chain was inserted between the mesogenic core and the terminal menthyl groups by reducing the steric effect. M₁ showed no mesomorphism, while M₂−M₅ revealed enantiotropic cholesteric phase. In addition, M₂ and M₃ also showed a cubic blue phase on cooling. The selective reflection of light for M₂−M₅ shifted to the short reciprocal wavelength region with increasing the temperature or intramolecular spacer length. P₂−P₅ exhibited the smectic A phase. The melting, clearing, and glass transition temperatures increased when increasing the aryl number in the mesogenic core or decreasing the intramolecular spacer length.     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

Novel soluble aromatic poly(amideimide)s containing 9,9-diphenylfluorene moieties: characterization and optical properties

A series of aromatic poly(amideimide)s containing 9,9-diphenylfluorene moieties and the amide units in the main chain have been synthesized by solution polycondensation reaction of newly prepared diamidedianhydride with several aromatic diamines: 1,3-phenylenediamine, 3,3′-dimethoxy-biphenyl-4,4′-diamine, 4,4′-oxydianiline, 4,4′-(1,3-phenylenedioxy)dianiline, 4,4′-(9-fluorenylidene)dianiline and 1,5-diaminonaphthalene. Molecular structures of the polymers obtained have been characterized using ¹³C NMR, ¹H NMR and FTIR spectroscopies. The polymers prepared are readily soluble in aprotic polar solvents, and form optically transparent films by solution casting. The resultant poly(amideimide)s have been analyzed by differential scanning calorimetry (DSC), thermogravimetry (TG) and wide-angle X-ray diffraction measurements. They exhibited high levels of thermal stability, with decomposition temperatures in the range 452–494 °C, and high glass transition temperatures (181–278 °C). The optical behavior of these polymers has been investigated in NMP solution as well as in the films. The photoluminescence (PL) spectra of the free-standing films prepared from the poly(amideimide)s exhibited maximum emission bands around 506–525 nm in the green region.