ZnSO_4-Thr-H_2O体系(25℃)的相平衡及配合物的合成与性质

用半微量相平衡方法研究了硫酸锌 -苏氨酸 -水体系在 2 5℃及全浓度范围内的溶度性质 ,绘制了体系的相图和饱和溶液折光率曲线 ,体系中不存在新化合物 .在水 -丙酮混合溶剂中合成了未见文献报道的Zn(Thr)SO4 ·H2 O三元固态化合物 ,通过化学分析、元素分析 ,IR ,XRD ,XPS和TG -DTG等对其组成、结构及热稳定性进行了研究 .用精密转动弹热量计测定了配合物的标准燃烧能 ( - 11848.76± 17.76)J·g-1,求得它的标准燃烧焓 ( - 3 5 3 4.82±5 .3 0 )kJ·mol-1,标准生成焓 ( - 2 5 6.3 7± 5 .69)kJ·mol-1.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

4-硝基苯甲醇的低温热容和标准摩尔生成焓

用精密自动绝热量热计测定了4-硝基苯甲醇（4-NBA）在78 ~ 396 K温区的摩尔热容。其熔化温度、摩尔熔化焓及摩尔熔化熵分别为:(336.426 ± 0.088) K, (20.97 ± 0.13) kJ×mol-1 和 (57.24 ± 0.36) J×K-1×mol-1.根据热力学函数关系式,从热容值计算出了该物质在80 ~ 400 K温区的热力学函数值 [HT - H298.15 K] 和[ST - S298.15 K]. 用精密氧弹燃烧量热计测定了该物质在T＝298.15 K的恒容燃烧能和标准摩尔燃烧焓分别为 (C7H7NO3, s)＝- ( 3549.11 ± 1.47 ) kJ×mol-1 和 (C7H7NO3, s)＝- ( 3548.49 ± 1.47 ) kJ×mol-1. 利用标准摩尔燃烧焓和其他辅助热力学数据通过盖斯热化学循环, 计算出了该物质标准摩尔生成焓 (C7H7NO3, s)＝- (206.49 ± 2.52) kJ×mol-1 .     

三元配合物Tb(Et2dtc)3(phen)的热化学性质

以铜试剂(NaEt2dtc•3H2O)和邻菲咯啉(o-phen•H2O) 与水合氯化铽(TbCl3•3.75H2O)在无水乙醇中制得了三元固态配合物.化学分析和元素分析确定其组成为Tb(Et2dtc)3(phen).IR光谱研究表明配合物中Tb3＋与NaEt2dtc中的硫原子双齿配位,同时与phen的氮原子双齿配位.用Calvet微热量计测定了298.15 K下液相生成反应的焓变ΔrHmθ(l),为(－21.819±0.055) kJ•mol－1,通过热化学循环计算了固相生成反应焓变ΔrHmθ(s),为(128.476±0.675) kJ•mol－1.改变反应温度,研究了液相生成反应的热动力学.用精密转动弹热量计测得配合物的恒容燃烧能ΔcU为(－17646.95±8.64) kJ•mol－1,经计算其标准燃烧焓ΔcHHmθ和标准生成焓ΔfHmθ分别为(－17666.16±8.64) kJ•mol－1和(－1084.04±9.49) kJ•mol－1.     

Zn(Thr)Ac2•2H2O固态配合物的制备及标准生成焓

在水-丙酮混合溶剂中合成了未见文献报导的Zn(Thr)Ac2•2H2O固态配合物,通过化学分析、元素分析、IR、XRD和TG-DTG等对其组成、结构及热稳定性进行了研究.用微量热法测定了配合物在298.15 K时在纯水中的溶解焓,计算了Zn(Thr)2＋(aq,∞)和Zn(Thr)Ac2•2H2O(s) 的标准摩尔生成焓分别为(955.24±5.70) kJ•mol－1和(-570.92±5.71) kJ•mol－1.     

L－苏糖酸钴的制备及标准生成焓

以L－苏糖酸钙与草酸的复分解反应得到的L－苏糖酸溶液，在80℃下与过量 CoO反应较长时间，滤液浓缩后加无水乙醇制得L－苏糖酸钴粉红色粉末。用化学分 析及元素分析确定其组成为Co(C4H7O5)·H2O,IR光谱分析结果表明新化合物中苏糖 酸以羧基氧原子与Co^+配位。TD－DTG结果说明，它在热分解中有一定稳定性，经 脱水生成Co-(C4H7O5)2,最后生成CoO。用转动弹热量计测得其恒容燃烧能ΔcE为（ －3504.47±1.64)kJ·mol^-1，计算得其标准燃烧焓和标准生成焓ΔfHm^θ分别为 （－3501．99±1．64）和（－2170．67±1.97)kJ·mol^-1。     

氯化钆与L-酪氨酸和甘氨酸三元固态配合物的热化学及热分解动力学研究

合成表征了氯化钆与L 酪氨酸和甘氨酸形成的三元固态配合物Gd(Tyr) (Gly) 3 Cl3 ·3H2 O .用具有恒温环境的溶解 -反应热量计 ,测定了配位反应GdCl3 ·6H2 O (s) +Tyr (s) +3Gly (s) =Gd(Tyr) (Gly) 3 Cl3 ·3H2 O (s) +3H2 O (l)在 2 98.15K时的反应焓为 ( 9.45 1± 0 .468)kJ·mol-1 .计算得配合物Gd(Tyr) (Gly) 3 Cl3 ·3H2 O (s)在 2 98.15K时的标准摩尔生成焓为ΔfH m =-( 4 2 69.7± 2 .3 )kJ·mol-1 .并用热分析手段对配合物进行了非等温热分解动力学研究 ,推断配合物第二步热分解反应机理为二级化学反应 ,其动力学方程为 :dα/dT =(A/β)exp( -E/RT) ( 1-α) 2 ,求得分解反应的表观活化能为E =2 15 .17kJ·mol-1 ,指前因子为 10 1 8.71 s-1 .     

配合物Zn(Phe)(NO3)2·H2O(s)的低温热容和标准摩尔生成焓

利用精密自动绝热热量计直接测定了配合物Zn(Phe)(NO3)2·H2O(s) (Phe:苯丙氨酸)在78-370 K温区的摩尔热容. 通过热容曲线的解析得到该配合物的起始脱水温度为, T0=(324.27±0.37) K. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp, m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 依据Hess定律, 通过设计热化学循环, 选择体积为100 mL浓度为2 mol·L-1 的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测定混合物{ZnSO4·7H2O(s)+2NaNO3(s)+L-Phe(s)}和{Zn(Phe)(NO3)2·H2O(s)+Na2SO4(s)}的溶解焓为, ⊿dH0m,1 =(69.42±0.05) kJ·mol-1, ⊿dH0 m,2 =(48.14±0.04) kJ·mol-1, 进而计算出该配合物的标准摩尔生成焓为, ⊿fH0m =-(1363.10±3.52) kJ·mol-1. 另外, 利用紫外-可见(UV-Vis)光谱和折光指数(refractiveindex)的测量结果检验了所设计的热化学循环的可靠性.     

四氯合金属(Ⅱ)酸烷铵在280-500K间的热力学性质和相变 Ⅰ.四氯合锰(Ⅱ)酸n-十二烷铵

在280-500K的温度范围内用自动绝热量热计测定了(n-C_(12)H_(25)NH_2)_2MnCl_4的热容。发现了两个固-固相变,固_(Ⅲ)→固_(Ⅱ)和固_Ⅰ→固_(Ⅱ)。前者的相变温度、相变焓和相变熵分别为330.6±0.1K,47.78±0.29kJ·mol~(-1)和144.5±0.9J·K~(-1)·mol~(-1),后者的对应相变热参数分别为334.5±0.1K,5.96±0.05kJ·mol~(-1)和17.82±0.15J·K~(-1)·mol~(-1)。报道了该物质每隔10K的热力学性质.     

水合烟酸钡的合成、±结构表征和热化学性质

选择烟酸和氢氧化钡作为反应物, 利用室温固相合成方法, 借助于球磨技术, 合成了一种新的化合物——水合烟酸钡. 利用化学分析、元素分析、FTIR和X射线粉末衍射等方法确定了它的组成和结构为Ba(Nic)2·3H2O(s). 利用精密自动绝热热量计直接测定了此化合物在78-400 K温区的摩尔热容. 在热容曲线上出现了一个明显的吸热峰, 通过对热容曲线的解析, 得到了相变过程的峰温、相变焓和相变熵分别为(327.097±1.082) K、(16.793±0.084) kJ·mol-1和(51.340±0.164) J·K-1·mol-1. 将该温区的摩尔热容实验值用最小二乘法拟合得到摩尔热容(Cp,m)对温度(T)的多项式方程, 并且在此基础上计算出了它的舒平热容值和各种热力学函数值. 另外, 依据Hess定律, 通过设计合理的热化学循环, 选择体积为100 mL、浓度为0.5 mol·L-1的盐酸作为量热溶剂, 利用等温环境溶解-反应热量计分别测量固相反应的反应物和产物在所选溶剂中的溶解焓, 利用溶解焓确定固相反应的反应焓为⊿rH0m=-(84.12±0.38) kJ·mol-1. 最后, 利用固相反应的反应焓和其它反应物和产物已知的热力学数据计算出水合烟酸钡的标准摩尔生成焓为⊿fH0m[Ba(Nic)2·3H2O(s)]=-(2115.13±1.90) kJ·mol-1.     

Lu(Et2dtc)3(phen)的生成反应焓变、摩尔热容和恒容燃烧能测定

A ternary solid complex Lu(Et₂dtc)₃(phen) has been obtained from the reaction of hydrated lutetium chloride with sodium diethyldithiocarbamate (NaEt₂dtc), and 1,10-phenanthroline (o-phen·H₂O) in absolute ethanol. IR spectrum of the complex indicates that Lu³⁺ binds with sulfur atom in the Na(Et₂dtc)₃ and nitrogen atom in the o-phen. The enthalpy change of liquid-phase reaction of formation of the complex, Δ_rH_m^Ө (l), was determined to be (-32.821 ± 0.147 ) kJ·mol^-1 at 298.15 K by an RD-496 Ⅲ type heat conduction microcalormeter. The enthalpy change of the solid-phase reaction of formation of the complex, Δ_rH_m^Ө (s), was calculated to be (104.160 ± 0.168) kJ · mol^-1 on the basis of an appropriate thermochemistry cycle. The thermodynamics of liquid-phase reaction of formation of the complex was investigated by changing the temperature of liquid-phase reaction. Fundamental parameters, such as the activation enthalpy (ΔH_≠^Ө), the activation entropy (ΔS_≠^Ө), the activation free energy (ΔG_≠^Ө), the apparent reaction rate constant (k), the apparent activation energy (E), the pre-exponential constant (A) and the reaction order (n), were obtained by combination the reaction thermodynamic and kinetic equations with the data of thermokinetic experiments. The molar heat capacity of the complex, c_m, was determined to be (82.23 ± 1.47) J·mol^-1·K^-1 by the same microcalormeter. The constant-volume combustion energy of the complex, Δ_cU, was determined as (-17 898.228 ± 8.59) kJ·mol^-1 by an RBC-Ⅱtype rotating-bomb calorimeter at 298.15 K. Its standard enthalpy of combustion, Δ_cH_m^Ө, and standard enthalpy of formation, Δ_fH_m^Ө, were calculated to be (-17 917.43 ± 8.11) kJ·mol^-1 and (-859.95 ±10.12) kJ·mol^-1, respectively.     

二甲氧基嘧啶胺与金属配合物的恒容燃烧热测定

在无水乙醇中，使钴、铜、锌、锰的盐与二甲氧基嘧啶胺(AMP)反应，回流数 小时后，浓缩、冷却，抽滤，制得了6种二甲氧基嘧啶胺与钴、铜、锌、锰的固态 配合物．用化学分析和元素分析确定了它们的组成，分别为Co(AMP)_2Cl_2(1)， Cu(AMP)_2Cl_2(2)，Cu(AMP)_2(NO_3)_2(3)，Zn(AMP)_2Cl_2(4)，Mn(AMP) _2Cl_2(5)和zn(AMP)s04(6)；用IR，～1H NMR研究了他们的成键情况；用精密转动 弹热量计测定了配体及配合物的恒容燃烧热△_cU，计算了它们的标准摩尔燃烧焓 △_cH_m～θ和标准摩尔生成焓△fH_m～θ．     

量热法测定氯化钐与甘氨酸配合物的标准生成焓

稀土在生命科学领域的研究日益受到人们关注,稀土化合物所具有的抑菌、抑癌、消炎等作用及其作用机理的探讨已有报道［１～３］。最近几年稀土在生物领域中的研究又有了新的突破和进展,从稀土与氨基酸、蛋白质、膜脂及膜蛋白的作用到其对ＤＮＡ。ＲＮＡ的影响［１,４］,从稀土的分子水平、细胞及亚细胞水平到动物整体实验的系统研究［５,６］等,分别从不同的层次、不同的水平研究了稀土的生物效应。但至目前为止,稀土的生物效应机理及其对人体的影响尚未得到令人满意的解释。由于氨基酸是构成人体蛋白质的基本单位,故研究稀土与氨基…     

Phase equilibrium system of RbCl-PrCl3-HCl(12.86 mass %)-H2O at 298.15 K and standard molar enthalpy of formation of new solid-phase compound

The equilibrium solubility of the quaternary system RbCl-PrCl₃-HCl-H₂O was determined at 298.15 K and the corresponding equilibrium diagram was constructed in this paper. The quaternary system is complicated with three equilibrium solid phases, RbCl, RbPrCl₄ · 4H₂O (1:1 type) and PrCl₃ · 6H₂O, of which the new compound RbPrCl₄ · 4H₂O was found to be congruently soluble in the system. The new compound obtained was identified and characterized by the methods of X-ray diffraction, thermogravimetry, and differential thermogravimetry. The compound loses its crystal water by one step at 343 K to 453 K. The standard molar enthalpy of solution of RbPrCl₄ · 4H₂O in deionized water was measured to be −24.53 ± 0.22 kJ mol⁻¹ by heat conduction microcalorimetry. Its standard molar enthalpy of formation was calculated to be −2743.20 ± 1.09 kJ mol⁻¹.     

Zn(NO3)2-Leu-H2O体系(25℃)的相平衡及新相配合物的合成与性质

用半微量相平衡方法研究了硝酸锌-亮氨酸-水体系在25℃及全浓度范围内的溶度性质,绘制了体系的相图和饱和溶液折光率曲线,发现并制备了未见报道的非一致溶解配合物[Zn(Leu)(NO3)2(H20)]·H20(A)和Zn(Leu)2(NO3)2·H20(B),通过化学分析、元素分析、IR和TG-DTG等对其组成、结构及热稳定性进行了研究.用精密转动弹热量计测定配合物的标准燃烧能分别为(-12692.80±5.83)和(-15345.71±9.11)J/g,求得它们的标准燃烧焓分别为(-4523.22±2.08)和(-7208.86±4.28)kJ/mol,标准生成焓分别为(-615.67±2.27)和(-1863.16±4.60)kJ/mol     

Density and phase diagram of the magnesium–lead system in the region of Mg2Pb intermetallic compound

The phase diagram of magnesium–lead system has been investigated by a new method for phase analysis on the basis of a strong penetrating radiation. The measurements have shown that the standard phase diagram of this system contains inaccuracy in the region of the Mg₂Pb intermetallic compound. New data on the temperature dependences of the solid and the melt densities have been obtained. The density change during the phase transitions has been directly measured.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

Application of Fe2O3/Al2O3 Composite Particles as Oxygen Carrier of Chemical Looping Combustion

Chemical looping combustion (CLC) of carbonaceous compounds has been proposed, in the past decade, as an efficient method for CO2 capture without cost of extra energy penalties. The technique involves the use of a metal oxide as an oxygen carrier that transfers oxygen from combustion air to fuels. The combustion is carried out in a two-step process: in the fuel reactor, the fuel is oxidized by a metal oxide, and in the air reactor, the reduced metal is oxidized back to the original phase. The use of iron oxide as an oxygen carrier has been investigated in this article. Particles composed of 80 wt% Fe2O3, together with Al2O3 as binder, have been prepared by impregnation methods. X-ray diffraction (XRD) analysis reveals that Fe2O3 does not interact with the Al2O3 binder after multi-cycles. The reactivity of the oxygen carrier particles has been studied in twenty-cycle reduction-oxidation tests in a thermal gravimetrical analysis (TGA) reactor. The components in the outlet gas have been analyzed. It has been observed that about 85% of CH4 converted to CO2 and H2O during most of the reduction periods. The oxygen carrier has kept quite a high reactivity in the twenty-cycle reactions. In the first twenty reaction cycles, the reaction rates became slightly higher with the number of cyclic reactions increasing, which was confirmed by the scanning electron microscopy (SEM) test results. The SEM analysis revealed that the pore size inside the particle had been enlarged by the thermal stress during the reaction, which was favorable for diffusion of the gaseous reactants into the particles. The experimental results suggested that the Fe2O3/Al2O3 oxygen carrier was a promising candidate for a CLC system.     

纳米结晶体Ni0.5Zn0.5Fe2O4对高氯酸铵热行为及分解反应动力学的影响

采用差示扫描量热法(DSC)、热重和微分热重(TG-DTG)及固相原位反应池/快速扫描傅立叶变换红外联用技术(hyphenated in situ thermolysis/RSFTIR)研究了纳米结晶体Ni_0.5Zn_0.5Fe₂O₄与高氯酸铵(AP)组成的混合物的热行为和分解反应动力学。结果表明：Ni_0.5Zn_0.5Fe₂O₄使得AP的低、高温分解放热峰温分别提前17.44 K和27.74 K,并使得对应的分解热分别增加3.7 J·g^-1和193.7 J·g^-1。Ni_0.5Zn_0.5Fe₂O₄并不影响AP的晶转温度和晶转热。Ni_0.5Zn_0.5Fe₂O₄使得AP的TG曲线出现3个阶段,并使得后2个失重阶段的初始和终止温度都有所提前。凝聚相分解产物分析表明Ni_0.5Zn_0.5Fe₂O₄加速了凝聚相AP的分解及氨气的释放。含Ni_0.5Zn_0.5Fe₂O₄的AP的高温分解反应的动力学参数E_a=238.88 kJ·mol^-1,A=1018.59 s^-1,动力学方程可表示为dα/dt=10^18.99(1-α)[-ln(1-α)]^3/5e^-2.87×104T。始点温度(T_e)和峰顶温度(T_p)计算得出AP的热爆炸临界温度值分别为:574.83 K和595.41 K。分解反应的活化熵(ΔS^≠)、活化焓(ΔH^≠)和活化能(ΔG^≠)分别为:109.61 J·mol^-1·K^-1、236.49 kJ·mol^-1及172.58 kJ·mol^-1。     

Li2WO4-MgWO4赝二元系的研究

The phase diagram of a pseudo-binary system Li_2WO_4-MgWO_4 has been investigated by means of DTA and X-ray powder diffraction methods. In Li_2WO_4-MgWO_4 system, a new compound Li_2Mg_2(WO_4)_3 is formed by peritectic reaction a+L<=>x at 1010 ℃. The compound Li_2Mg_2(WO_4)_3 belongs to orthorhombic system with space group Pnam. The lattice parameters at room temperature are a=0.5112, b=1.7612 and c=1.0462 nm. The measured density is D_m=5.48 gcm~(-3), and Z=4. The new compound Li_2Mg_2(WO_4)_3 is an ionic conductor.