Investigation of conformational stability and vibrational spectra of halomethylsulfonyl isocyanates

The conformational behavior and structural stability of chloro- and fluoromethylsulfonyl isocyanates were investigated by quantum mechanical DFT and ab initio MP2 calculations. The 6-311++G^** basis set was employed to include polarization and diffuse functions in the calculations. The molecules were found to exist in a mixture of two stable gauche conformations. The potential scans were calculated from which the rotational barriers could be estimated. The vibrational frequencies and spectra were computed at B3LYP/6-311++G^** level. The potential energy distributions were then calculated to provide tentative vibrational assignment for the normal modes of the stable conformers of both molecules.     

DFT studies and vibrational spectra of isoquinoline and 8-hydroxyquinoline

The geometry, frequency and intensity of the vibrational bands of isoquinoline (IQ) and 8-hydroxyquinoline (8-HQ) were obtained by the density functional theory (DFT) calculations with the B3LYP functional and 6-31 G* basis set. The vibrational spectral data obtained from the solid phase mid and far FT-IR and FT-Raman spectra of IQ and 8-HQ are assigned based on the results of the normal coordinate calculations. The observed and the calculated spectra are found to be in good agreement.     

Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignments for trans-3-chloropropenoyl chloride

The infrared (3500-30 cm(-1)) spectra of gaseous and solid and the Raman (3500-200 cm(-1)) spectra of the liquid with quantitative depolarization ratios and solid trans-3-chloropropenoyl chloride (trans-ClCHCHCClO) have been recorded. These data indicate that both the anti (carbonyl bond trans to the carbon-carbon double bond) and syn conformers are present in the fluid states but only the anti conformer is present in the crystalline state. The mid-infrared spectra of the sample dissolved in liquid xenon as a function of temperature (-55 to -100 degrees C) have been recorded. Utilizing conformer pairs at 870 and 725 cm(-1), 1215 and 1029 cm(-1), and 1215 and 1228 cm(-1), the enthalpy difference has been determined to be 136+/-5 cm(-1) (389+/-14 cal mol(-1)) with the anti conformer the more stable form. Optimized geometries and conformational stabilities were obtained from ab initio calculations at the levels of RHF/6-31G(d), MP2/6-31G(d), MP2/6-311 + + G(d,p), MP2/6-311 + + G(2d,2p) and MP2/6-311 + + G(2df,2pd) with only the latter two calculations predicting the anti rotamer to be the more stable form. The vibrational frequencies, harmonic force constants and infrared intensities were obtained from the MP2/6-31G(d) calculations, whereas the Raman activities and depolarization values were obtained from the RHF/6-31G(d) calculations. The spectra are interpreted in detail and the results are compared with those obtained for some related molecules.     

DFT and experimental studies of the structure and vibrational spectra of curcumin

The potential energy surface of curcumin [1,7‐bis(4‐hydroxy‐3‐methoxyphenyl)‐1,6‐heptadiene‐3,5‐dione] was explored with the DFT correlation functional B3LYP method using 6‐311G* basis. The single‐point calculations were performed at levels up to B3LYP/6‐311++G**//B3LYP/6‐311G*. All isomers were located and relative energies determined. According to the calculation the planar enol form is more stable than the nonplanar diketo form. The results of the optimized molecular structure are presented and compared with the experimental X‐ray diffraction. In addition, harmonic vibrational frequencies of the molecule were evaluated theoretically using B3LYP density functional methods. The computed vibrational frequencies were used to determine the types of molecular motions associated with each of the experimental bands observed. Our vibrational data show that in both the solid state and in all studied solutions curcumin exists in the enol form. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Infrared and Raman spectra, conformational stability and vibrational assignment of 1-chloro-1-silacyclopentane

Infrared and Raman spectra (3500-60 cm⁻¹) of gas and/or liquid and solid 1-chloro-1-silacyclopentane (c-C₄H₈SiClH) have been recorded and the vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twisted form. Ab initio calculations with a variety of basis sets up to MP2(full)/aug-cc-pVTZ predict the envelope-axial and envelope-equatorial conformers are saddle points with nearly the same energies but much lower in energy than the planar conformer. Density functional theory calculations by the B3LYP method predicts slightly lower energies for the two envelope forms and considerably lower for the planar form. By utilizing the MP2(full)/6-31G(d) calculations the force constants, frequencies, infrared intensities, band contours, Raman activities, and depolarization values have been obtained to support the vibrational assignment. Estimated r₀ structural parameters have been obtained from adjusted MP2(full)/6-311 + G(d, p) calculations. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.     

DFT studies of the structure and vibrational spectra of 8-hydroxyquinoline N-oxide

The geometry, frequency and intensity of the vibrational bands of 8-hydroxyquinoline N-oxide (8-HQNO) and its deuterated derivative (8-DQNO) were obtained by the density functional theory (DFT) with the BLYP and B3LYP functionals and 6-31G(d,p) basis set. The optimized bond lengths and bond angles are in good agreement with the X-ray data. The IR and INS spectra of 8-HQNO and 8-DQNO computed at the DFT level reproduce the vibrational wavenumbers and intensities with an accuracy, which allows reliable vibrational assignments.     

DFT studies of the structure, vibrational and NMR spectra of 2-amino-pyridine betaine monohydrate

Four of the most stable conformers of 2-amino-pyridine betaine (1-carboxymethyl-2-amino-pyridinium inner salt) monohydrates, 2-NH₂PB·H₂O, and one anhydrous were analyzed by the B3LYP/6-31G(d,p) calculations and compared with the X-ray data. Two types of optimized conformers can be distinguished: (a) with NH₂ and COO groups and (b) an imino tautomer with NH and COOH groups. A common feature of the optimized molecules are intramolecular hydrogen bonds between the COO⁻ and H₂N or COOH and HN groups. In the crystal both NH₂ and COO groups participate in intermolecular hydrogen bonds. The probable assignments of the anharmonic experimental solid state vibrational frequencies of 2-NH₂PB·H₂O and 2-ND₂PB·D₂O (conformer 2) based on the calculated B3LYP/6-31G(d,p) harmonic frequencies have been made. Correlations between experimental chemical shifts for 2-NH₂PB, its hydrochloride and 1-carboxyethyl-2-amino-pyridinium inner salt (¹³C and ¹H in D₂O) and GIAO/B3LYP/6-31G(d,p) calculated isotropic shielding constants, δ_exp=a+bσ_calc, are reported. Good linear regression between experimental and theoretical results for ¹³C was obtained. Only in 2-NH₂PB the hydrogen at -position is outside the linear correlation.     

Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignment of 2-fluorobutane

The infrared spectra (3500-50 cm-1) of gas and solid and the Raman spectrum (3500-50 cm-1) of liquid 2-fluorobutane, CH3CHFCH2CH3, have been recorded. Variable temperature studies over the range -105 to -150 degrees C of the infrared spectra (3500-400 cm-1) of the sample dissolved in liquid krypton have also been recorded. By utilizing the relative intensities of six conformer pairs each for both Me-trans/F-trans and Me-trans/H-trans, the Me-trans conformer is found to be the lowest energy form with an enthalpy difference to the F-trans conformer of 102 +/- 10 cm-1 ( 1.21+/- 0.12 kJmol-1) whereas the H-trans conformer is the highest energy form with an enthalpy difference of 208 +/- 21 cm-1 ( 2.49 +/- 0.25 kJmol-1) higher than the Me-trans form. At ambient temperature, it is estimated that there is 50 +/- 2% of the Me-trans form, 31 +/- 1% of the F-trans form, and 19 +/- 1% of the H-trans conformer present. Equilibrium geometries and total energies of the three conformers have been determined by ab initio calculations with full electron correlation by the perturbation method to second order using a number of basis sets. A complete vibrational assignment is proposed for the Me-trans conformer and many of the fundamentals have been identified for the other two forms based on the force constants, relative infrared and Raman intensities, and depolarization ratios obtained from MP2/6-31Gd ab initio calculations. The spectroscopic and theoretical results are compared to the corresponding properties for some similar molecules.     

Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

X-Ray, MP2 and DFT studies of the structure and vibrational spectra of homarinium chloride

The effects of hydrogen bonding, inter- and intramolecular electrostatic interactions on the structure of homarinium chloride, HOMH·Cl, in the crystal and its isolated molecule have been studied by X-ray diffraction, FT-IR, Raman, ¹H and ¹³C NMR spectroscopies, and by the MP2 and DFT theoretical methods. In the crystal, the Cl⁻ anion is connected with protonated homarine via the O–HCl⁻ hydrogen bond of the length of 2.937(4) Å, and two N⁺Cl⁻ intermolecular electrostatic interactions. In the isolated molecule, according to the MP2 and B3LYP calculations, the Cl⁻ anion is engaged in a shorter hydrogen bond (O–HCl⁻ of 2.811–2.861 Å) and in one type of intramolecular electrostatic interactions. The calculated bond lengths and bond angles at the MP2 and B3LYP levels of theory are in good agreement with the X-ray data, except the conformation of the COOH group, which is cis (syn) in the crystal and trans (anti) in the isolated molecule. The tentative assignments for the experimental solid state vibrational spectra of HOMH·Cl and HOMD·Cl have been made on the basis of the B3LYP/6-31G(d,p) calculated frequencies and intensities. The effect of quaternization of picolinic acid on the chemical shifts of the ring protons and carbons is analyzed.     

Crystal structure and vibrational spectra of AlVO4. A DFT study

We present periodic density functional calculations within the generalized gradient approximation (Perdew-Wang 91) on structure and vibrational properties of bulk AlVO(4). The optimized structure agrees well with crystallographic data obtained by Rietveld refinement (the mean absolute deviation of bond distances is 0.032 A), but the deviations are larger for the lighter oxygen atoms than for the heavier Al and V atoms. All observed bands in the Raman and IR spectrum have been assigned to calculated harmonic frequencies. Bands in the 1020-900 cm(-1) region have been assigned to V-O((2)) stretches in V-O((2))-Al bonds. The individual bands do not arise from vibrations of only one bond, not even from vibrations of several bonds of one VO(4) tetrahedron. The results confirm that vibrations around 940 cm(-1) observed for vanadia particles supported on thin alumina film are V-O-Al interface modes with 2-fold coordinated oxygen atoms in the V-O((2))-Al interface bonds.     

Infrared and Raman spectra, conformational stability, ab initio calculations, and vibrational assignments for methylaminothiophosphoryl difluoride

Infrared spectra (4000–50 cm⁻¹) of the vapor, amorphous and crystalline solids and Raman spectra (3600–10 cm⁻¹) of the liquid with qualitative depolarization data as well as the amorphous and crystalline solids of methylaminothiophosphoryl difluoride, CH₃N(H)P(=S)F₂, and three deuterated species, CD₃N(H)P(=S)F₂, CH₃N(D)P(=S)F₂, and CD₃N(D)P(=S)F₂, have been recorded. The spectra indicate that in the vapor, liquid and amorphous solid a small amount of a second conformer is present, whereas only one conformer remains in the low temperature crystalline phase. The near-infrared spectra of the vapor confirms the existence of two conformers in the gas phase. Asymmetric top contour simulation of the vapor shows that the trans conformer is the predominant vapor phase conformer. From a temperature study of the Raman spectrum of the liquid the enthalpy difference between the trans and near-cis conformers was determined to be 368±15 cm⁻¹ (4.41±0.2 kJ/mol), with the trans conformer being thermodynamically preferred. Ab Initio calculations with structure optimization using the 6-31G(d) and 6-311+G(d,p) basis sets at the restricted Hartree–Fock (RHF) and/or with full electron correlation by the perturbation method to second order (MP2) support the occurrence of near-trans (5° from trans) and near-cis (20° from cis) conformers. From the RHF/6-31G(d) calculation the near-trans conformer is predicted to be the more stable form by 451 cm⁻¹ (5.35 kJ/mol) and from the MP2/6-311+G(d,p) calculation by 387 cm⁻¹ (4.63 kJ/mol). All of the normal modes of the near-trans rotamer have been assigned based on infrared band contours, depolarization values and group frequencies and the assignment is supported by the normal coordinate calculation utilizing harmonic force constants from the MP2/6-31G(d) ab initio calculations.     

Raman spectra,conformational stability,structural parameters,vibrational assignment,and ab initio calculations for epifluorohydrin

The Raman spectra (3200–100 cm⁻¹) of epifluorohydrin, OCH₂CH(CH₂F), in variable solvents, as well as that of the gas have been recorded and several of the bands due to the two less stable conformers have been identified. The variable solvent studies were inconclusive on the relative conformer stabilities. The conformational energy differences and optimized geometries for all three conformers have been obtained from ab initio calculations with the 3–21G, 4–31G and 6–31G* basis sets. A normal coordinate analysis has also been performed for each conformer with a force field determined from the 3–21G basis set. Assignment of the vibrational fundamentals observed in the Raman spectra of the fluid phases is proposed based on the normal coordinate calculations. In the liquid phase, one of the conformers with a large dipole moment predominates and it appears to be the gauche-I form which is the only one found in the solid. Utilizing the three rotational constants previously reported for each conformer, along with restricted relative distances for several of the structural parameters among the conformers from ab initio calculations, r₀ structural parameters for the heavy atoms have been determined.     

FTIR, FT-Raman spectra and ab initio DFT vibrational analysis of 2-bromo-4-methyl-phenylamine

The FTIR and FT-Raman spectra of 2-bromo-4-methyl-phenylamine (BMP) have been recorded. From the standard geometrical parameters the geometry of BMP was optimized at ab initio and DFT levels of theory with complete relaxation in the potential energy surface using 6-311+g(d,p) and 6-311+g(2df,2p) basis sets. Several thermodynamic parameters were also calculated for the minimum energy conformer at ab initio and DFT level of theories. The harmonic vibrational frequencies were calculated and the scaled values have been compared with experimental FTIR and FT-Raman spectra. Majority of the computed wavenumbers were found to be in good agreement with the experimental observations. The experimental spectra also coincide satisfactorily with those of theoretically constructed bar type spectrograms.     

Infrared and Raman spectra,conformational stability,vibrational assignment and ab initio calculations of methylvinyl silyl chloride

The infrared spectra (3200-50 cm(-1)) of gaseous and solid and Raman spectra (3200-10 cm(-1)) of the liquid and solid methylvinyl silyl chloride, CH(2)=CHSiH(CH(3))Cl, and the Si-d isotopomer have been recorded. The three expected stable conformers (the three different groups eclipsing the double bond) have been identified in the fluid phase, but it was not possible to obtain an annealed solid with a single conformer. Variable temperature (-105 to -150 degrees C) studies of the infrared spectra of the sample dissolved in liquid krypton has been carried out. From these data the enthalpy differences between the most stable conformer with the hydrogen atom (HE) eclipsing the double bond to that with the chlorine atom (ClE) and the methyl group (ME) eclipsing the double bond have been determined to be 17+/-4 cm(-1) (203+/-48 Jmol(-1)) and 80+/-12 cm(-1) (957+/-144 Jmol(-1)), respectively. However in the liquid state the ME conformer is the most stable form with enthalpy differences of 13+/-4 and 27+/-7 cm(-1) to the HE and ClE rotamers, respectively. It is estimated that there is 39% of the HE conformer, 35% of the ClE conformer, and 26% of the ME conformer present at ambient temperature. A complete vibration assignment is proposed for the HE conformer which is based on infrared band contours and group frequencies, which is supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G(d) calculations. Additionally, several of the fundamentals for the other two conformers have been assigned. The optimal geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies are reported for all three conformers from MP2/6-31G(d,p) ab initio calculations with full electron correlation. Optimized geometrical parameters and conformational stabilities have been obtained from MP2/6-311+G(d,p) calculations. At this highest level of calculations, the HE conformer is predicted to be more stable by 62 and 84 cm(-1) than the ME and ClE conformers, respectively. The coefficients from the potential function governing the conformational interchange have been obtained from the MP2/6-31G(d) ab initio calculations. By utilizing the frequency of the SiH stretching mode, the r(0)-H distance has been determined to be 1.481 A for the HE conformer. The ab initio calculated quantities are compared to the experimentally determined values where applicable, as well as to some corresponding results for some similar molecules.     

Ab initio and DFT studies of the molecular structures and vibrational spectra of succinonitrile

The Molecular structure, conformational stability and vibrational frequencies of succinonitrile NCCH2CH2CN have been investigated with ab initio and density functional theory (DFT) methods implementing the standard 6-311++G* basis set. The potential energy surfaces (PES) have been explored at DFT-B3LYP, HF and MP2 levels of theory. In agreements with previous experimental results, the molecule was predicted to exist in equilibrium mixture of trans and gauche conforms with the trans form being slightly lower in energy. The vibrational frequencies and the corresponding vibrational assignments of succinonitrile in both C2h and C2 symmetry were examined theoretically and the calculated Infrared and Raman spectra of the molecule were plotted. Observed frequencies for normal modes were compared with those calculated from normal mode coordinate analysis carried out on the basis of ab initio and DFT force fields using the standard 6-311++G* basis set of the theoretical optimized geometry. Theoretical IR intensities and Raman activities are reported.     

DFT conformational studies of alpha-maltotriose

Recent DFT optimization studies on alpha-maltose improved our understanding of the preferred conformations of alpha-maltose. The present study extends these studies to alpha-maltotriose with three alpha-D-glucopyranose residues linked by two alpha-[1-->4] bridges, denoted herein as DP-3's. Combinations of gg, gt, and tg hydroxymethyl groups are included for both "c" and "r" hydroxyl rotamers. When the hydroxymethyl groups are for example, gg-gg-gg, and the hydroxyl groups are rotated from all clockwise, "c", to all counterclockwise, "r", the minimum energy positions of the bridging dihedral angles (phi(H) and psi(H)) move from the region of conformational space of (-, -), relative to (0 degrees , 0 degrees), to a new position defined by (+, +). Further, it was found previously that the relative energies of alpha-maltose gg-gg-c and "r" conformations were very close to one another; however, the DP-3's relative energies between hydroxyl "c" or "r" rotamers differ by more than one kcal/mol, in favor of the "c" form, even though the lowest energy DP-3 conformations have glycosidic dihedral angles similar to those found in the alpha-maltose study. Preliminary solvation studies using COSMO, a dielectric solvation method, point to important solvent contributions that reverse the energy profiles, showing an energy preference for the "r" forms. Only structures in which the rings are in the chair conformation are presented here.     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

Infrared and Raman spectra, ab initio calculations, conformational stability and vibrational assignment of 1-bromo-1-silacyclopentane

Infrared and Raman spectra (3500-60 cm(-1)) of gas and/or liquid and solid 1-bromo-1-silacyclopentane (c-C4H8SiBrH) have been recorded and the vibrational data indicate the presence of a single conformer with no symmetry which is consistent with the twisted form. Ab initio calculations with a variety of basis sets up to MP2(full)/6-311+G(2df,2pd) predict the envelope-axial and envelope-equatorial conformers to be saddle points with nearly the same energies but approximately 900 cm(-1) (5.98 kJ/mol) lower in energy than the planar conformer. Density functional theory calculations by the B3LYP method predict slightly lower energies for the two envelope forms and considerably lower energy for the planar form compared to the MP2 predictions. By utilizing the MP2(full)/6-31G(d) calculations the force constants, frequencies, infrared intensities, band contours, Raman activities, and depolarization values have been obtained to support the vibrational assignment. Estimated r0 structural parameters have been obtained from adjusted MP2(full)/6-311+G(d,p) calculations. These experimental and theoretical results are compared to the corresponding quantities of some other five-membered rings.