catena‐Poly[[[tetrakis(μ‐acetato‐κ2O:O′)dirhodium(II)]‐μ‐[1,3‐bis(dimethylamino)propan‐2‐ol‐κ2N:N′]] tetrahydrofuran hemisolvate]

In the structure of the title compound, {[Rh₂(C₂H₃O₂)₄(C₇H₁₈N₂O)]·0.5C₄H₈O}_n or {[Rh₂(O₂CMe)₄(Hbdmap)]·0.5C₄H₈O}_n, where Hbdmap is 1,3‐bis­(dimethyl­amino)propan‐2‐ol, each Hbdmap ligand is coordinated to two [Rh₂(O₂CMe)₄] units by two N atoms, resulting in a polymeric chain structure. The observed coordination mode of the Hbdmap mol­ecule is unprecedented.     

Polymeric diaqua(μ2‐2,2′‐bipyrimidinyl‐κ4N1,N1′:N3,N3′)‐di‐μ3‐hydroxy‐bis(μ5‐benzene‐1,3,5‐tricarboxylato‐κ5O1:O2:O3:O3:O5)tetracobalt(II) dihydrate

The structure of the title compound, [Co₄(C₉H₃O₆)₂(OH)₂(C₈H₆N₄)(H₂O)₂]·2H₂O, contains three separate species, namely the μ₅‐bridging C₉H₃O₆^3? anion, the doubly chelating and therefore μ₂‐bridging C₈H₆N₄ ligand (bi­pyrimidine, BPM), and the dihydrated di­aqua­di­hydroxy tetranuclear cationic cluster, [Co₄(OH^?)₂(H₂O)₂]⁶⁺·2H₂O, which lies on a crystallographic centre of symmetry, as does the BPM ligand with, in this case, the centre of symmetry coincident with the midpoint of the C—C bond joining the six‐membered rings. Within the cation cluster, the Co atoms of one pair are five‐coordinate and those of the other six‐coordinate.     

Bis{μ‐2‐[(2,3‐dichloro­phenyl)­amino]­benzoato‐κO}di‐μ2‐ethoxo‐octa­methyl­di‐μ3‐oxo‐tetra­tin(IV)

The title compound, [Sn₄(CH₃)₈(C₁₃H₈Cl₂NO₂)₂(C₂H₅O)₂O₂], is a centrosymmetric dimer, with three linearly fused four‐membered Sn—O—Sn—O rings. The coordination poly­hedron of the Sn atom bonded to the carboxyl­ate can be described as trigonal–bipyramidal distorted toward square‐pyramidal. That of the second Sn atom is similar, but the distortion towards square‐pyramidal geometry is greater. The Sn—O and Sn—C distances are 2.020 (2)–2.226 (2) and 2.096 (4)–2.114 (4) Å, respectively. The benzene rings of the 2‐[(2,3‐dichloro­phenyl)­amino]benzoate ligand subtend an angle of 50.49 (17)°; the conformation of the ligand is stabilized by intra­molecular N—H⋯Cl and N—H⋯O hydrogen bonds. The structure is assembled viaπ–π stacking inter­actions to form chains parallel to [10].     

Bis­(di‐μ‐acetato‐aqua{2‐[N‐ethyl‐N‐(2‐hydroxy‐4‐methyl­benzyl)­amino­methyl]‐1‐methyl­benz­imid­az­ole}­nickel)­nickel(II) tetra­hy­drate

The previously unknown title compound, tetra‐μ‐ace­tato‐1:2κ²O;1:2κ²O:O′;­2:3κ²O;­2:3κ²O:O′‐di­aqua‐1κO,3κO‐bis­(μ‐2‐{[N‐ethyl‐N‐(2‐hy­droxy‐5‐methylbenzyl)­am­ino]­methyl}‐1‐methyl‐1H‐benz­imid­az­ole)‐1κ³N³,N,O:2κO;3κ³N³,N,O:2κO‐tri­nickel(II) tetra­hy­drate, [Ni₃(C₁₈H₂₂N₃O)₂(C₂H₃O₂)₄(H₂O)₂]·­4H₂O, (I), is a centrosymmetric linear trinuclear nickel(II) complex, where the Ni atoms are in an octahedral coordination and the ligand heteroatoms act so as to model amino acid residues.     

Poly[[di‐μ3‐acetato‐di‐μ2‐aqua‐diaqua‐di‐μ3‐hydroxo‐tricopper(II)] naphthalene‐1,5‐disulfonate]

The crystal structure of the title complex, {[Cu₃(C₂H₃O₂)₂(OH)₂(H₂O)₄](C₁₀H₆O₆S₂)}_n, is built of infinite polymeric cationic {[Cu₃(C₂H₃O₂)₂(H₂O)₄(OH)₂]²⁺}_n chains stretching along the a axis, with naphthalene‐1,5‐disulfonate (1,5‐nds) anions in between. One independent Cu^II cation and the 1,5‐nds anion occupy special positions on crystallographic inversion centres. Each Cu^II cation has an octa­hedral coordination environment formed by two carboxyl O atoms, two hydroxo O atoms and two water mol­ecules. The carboxyl­ate and hydroxo groups perform a bridging function, linking adjacent Cu atoms in the chain, with a shortest Cu⋯Cu distance of 2.990 (3) Å. The chains are further linked into a three‐dimensional supra­molecular framework via hydrogen‐bonding inter­actions involving the sulfonate groups of the 1,5‐­nds dianions.     

catena‐Poly­[[tri‐n‐butyl­tin]‐μ‐N‐(1‐naphthyl)­maleamato]

The crystal structure of catena‐poly­[[tri‐n‐butyl­tin]‐μ‐3‐(1‐naph­thyl­amino­carbonyl)­acrylato‐κ²O¹:O³], [Sn(C₄H₉)₃(C₁₄H₁₀NO₃)]_n, is composed of polymeric chains wherein the metal center exhibits a distorted trigonal‐bipyramidal geometry, with three n‐butyl groups defining the trigonal plane [mean Sn—C 2.133 (7) Å] and the axial positions being occupied by the carboxyl­ate O atoms of two different N‐(1‐naphthyl)­maleamate ligands with inequivalent Sn—O distances [2.167 (4) and 2.457 (4) Å]. The N‐(1‐naphthyl)­maleamate fragment forms an essentially planar seven‐membered ring involving an intramolecular N—H?O hydrogen bond.     

Layered poly[μ2‐aqua‐μ3‐dimethyl­formamide‐di‐μ3‐phenyl­phosphon­ato‐dipotassium]

The first structurally characterized alkali metal phospho­nate, the title compound, [K₂(C₆H₆O₃P)₂(C₃H₇NO)(H₂O)]_n, has a complex structure, with layers parallel to the crystallographic bc plane consisting of two crystallographically independent K atoms sandwiched between the three types of ligands present in the structure, viz. water molecules, dimethyl­formamide molecules and two crystallographically independent phenyl­phospho­nate ligands. Six O atoms coordinate to one K atom and seven to the other. The interlayer distance is 15.327 (4) Å. The K—O distances are in the range 2.739 (2)–2.932 (2) Å for the seven‐coordinate K atom and 2.650 (2)–2.821 (2) Å for the six‐coordinate K atom.     

Di‐μ‐sulfito‐bis­[(4,4′‐di­methyl‐2,2′‐bi­pyridine)­zinc(II)] dihydrate and poly­[[aqua(1,10‐phenanthroline)­zinc(II)]‐μ3‐sulfito‐zinc(II)‐μ3‐sulfito]

Two different zinc sulfite compounds have been prepared through the decomposition of pyrosulfite–­di­thionite ions in aqueous solution, viz. a dimeric complex, di‐μ‐sulfito‐κ³O,O′:O′′;κ³O:O′,O′′‐bis­[(4,4′‐di­methyl‐2,2′‐bi­pyridine‐κ²N,N′)­zinc(II)] dihydrate, [Zn₂(SO₃)₂(C₁₂H₁₂N₂)₂]·2H₂O, (I), which was solved and refined from a twinned sample, and an extended polymer, poly­[[aqua(1,10‐phenanthroline‐κ²N,N′)­zinc(II)]‐μ₃‐sulfito‐κ²O:O′:O′′‐zinc(II)‐μ₃‐sulfito‐κ³O:O:O′], [Zn₂(SO₃)₂(C₁₂H₁₀N₂)(H₂O)]_n, (II). In (I), the dinuclear Zn^II complex has a center of symmetry. The cation is five‐coordinate in a square‐pyramidal arrangement, the anion fulfilling a bridging chelating role. Compound (II) comprises two different zinc units, one being five‐coordinate (square pyramidal) and the other four‐coordinate (trigonal pyramidal), and two independent sulfite groups with different binding modes to the cationic centers.     

Tetra­kis(μ2‐1,8‐naphthyridine)‐1:2κ4N:N′;3:4κ4N:N′‐bis­(μ2‐salicylato)‐1:4κ2O:O′;2:3κ2O:O′‐tetrakis­(salicylic acid)‐1κO,2κO,3κO,4κO‐tetra­silver(I)(4 Ag—Ag)

The title complex, [Ag₄(C₇H₅O₃)₂(C₈H₆N₂)₄(C₇H₆O₃)₄], lies about an inversion centre and has a unique tetra­nuclear structure consisting of four Ag^I atoms bridged by four N atoms from two 1,8‐naphthyridine (napy) ligands to form an N:N′‐bridge and four O atoms from two salicylate (SA) ligands to form an O:O′‐bridge. The Ag atoms have distorted octa­hedral coordination geometry. The centrosymmetric Ag₄ ring has Ag—Ag separations of 2.772 (2) and 3.127 (2) Å, and Ag—Ag—Ag angles of 107.70 (4) and 72.30 (4)°. All SA hydroxy groups take part in intra­molecular O—H⋯O hydrogen bonding. In the crystal packing, the napy rings are oriented parallel and overlap one another. These π–π inter­actions, together with weak inter­molecular C—H⋯O contacts, stabilize the crystal structure.     

Polymeric di­aqua­bis­[μ4‐1,3,5‐benzenetri­carboxyl­ato(3–)](μ‐4,4′‐bi­pyridine)­trizinc(II)

The solvothermal reaction of zinc(II) acetate with 1,3,5‐benzene­tri­carboxyl­ic acid and 4,4′‐bi­pyridine in 1‐butanol and acetic acid solution gives the title complex, [Zn₃(C₉H₃O₆)₂(C₁₀H₈N₂)(H₂O)₂]_n. There are two different coordination environments for the Zn atom, namely ZnNO₂(H₂O) and ZnO₄; in the latter case, the Zn atom lies on a twofold symmetry axis. Carboxyl­ate‐bridged Zn₃(O₂C)₆ clusters are connected through 1,3,5‐benzene­tri­carboxyl­ate and 4,4′‐bi­pyridine ligands (which lie about inversion centers), yielding a three‐dimensional framework.     

The twinned crystal structure of μ‐2,2′‐bipyrimidine‐1κ2N1,N1′:2κ2N3,N3′‐bis­{tris­[4,4,4‐trifluoro‐1‐(2‐thienyl)butane‐1,3‐dionato‐κ2O,O′]terbium(III)} ethyl acetate solvate

The title compound, [Tb₂(C₂₄H₁₂F₉O₆S₃)₂(C₈H₆N₄)]·C₄H₈O₂, has two terbium(III) centers bridged by the polyazine ligand 2,2′‐bipyrimidine (bpm), which is distorted from planarity by 7.0 (2)°. The terminal ligand 4,4,4‐trifluoro‐1‐(2‐thienyl)­butane‐1,3‐dione (tta) is bidentate, coordinating through the two O atoms, while the bridging ligand is bis‐bidentate, coordinating through four equivalent N atoms. Both the complex and the ethyl acetate solvent mol­ecules are dis­ordered. The structure was refined as a non‐merohedral twin.     

catena‐Poly[[μ‐hexa­nedioato‐1κO1:2κO6‐bis­[aqua­(5‐carboxy­penta­noato‐κO)copper(II)]]‐di‐μ‐4,4′‐bipyridine‐1κN:1′κN′;2κN:2′κN′]

In the title compound, [Cu₂(C₆H₈O₄)(C₆H₉O₄)₂(C₁₀H₈N₂)₂(H₂O)₂]_n, the square‐pyramidally coordinated Cu atoms are bridged by both 4,4‐bipyridine and adipate ligands into ladder‐­like chains, with exo‐orientated 5‐carboxypentan­oate ligands pendant from both side rails. Half of the adipate ligand is related to the other half by inversion symmetry. Inter­chain O—H⋯O hydrogen bonds from the aqua ligands to the carbonyl O atoms of the 5‐carboxy­penta­noate ligands are responsible for the formation of two‐dimensional grid‐like (4,4)‐networks, which complete a twofold inter­penetration.     

Poly­[[di­aqua­tris(μ6‐benzene‐1,2,4,5‐tetra­carboxyl­ato)­tris(μ2‐4,4′‐bi­pyridine)­hexacopper(II)] dihydrate]

The hydro­thermal reaction of an aqueous solution of Cu(CH₃COO)₂·H₂O, 1,2,4,5‐benzene­tetra­carboxylic acid and 4,4′‐bi­pyridine gave rise to the interesting title three‐dimensional polymer {[Cu₆(btec)₃(4,4′‐bpy)₃(H₂O)₂]·2H₂O}_n (btec is 1,2,4,5‐benzene­tetra­carboxyl­ate, C₁₀H₂O₈⁴⁻, and 4,4′‐bpy is 4,4′‐bi­pyridine, C₁₀H₈N₂), in which each btec ligand links six copper(II) cations into a lamellar [Cu₆(btec)₃(H₂O)₂]_n sub­polymer framework. There are two distinct diamine units and two distinct carboxylate units, with one of each lying across an inversion centre.     

Transition metal complexes with pyrazole‐derived ligands. XI. [Zn(μ‐L)(HL)(OAc)]2 (HL is 4‐acetyl‐3‐amino‐5‐methyl­pyrazole)

The title compound, bis(μ‐4‐acetyl‐3‐amino‐5‐methyl­pyrazol­ato‐N¹:N²)­bis­[(acetato‐O)­(4‐acetyl‐3‐amino‐5‐methyl­pyraz­ole‐N²)­zinc(II)], [Zn₂(C₆H₈N₃O)₂(C₂H₃O₂)₂(C₆H₉N₃O)₂], ex‐ists as a centrosymmetric binuclear mol­ecule with two tetrahedrally coordinated Zn atoms bridged by two pyrazolate anions. The geometry of the terminal and bridging pyrazole ligands are slightly different as a consequence of their differing modes of coordination.     

Redetermination of hexa­carbonyl­(η5‐cyclo­penta­dienyl)­bis(μ3‐selenido)­diiron(II)­cobalt(II)

The structure of the title compound, hexa­carbonyl‐1κ³C,2κ³C‐[3(η⁵)‐cyclo­penta­dienyl]­bis(μ₃‐selenido)­diiron(II)­cobalt(II),[CoFe₂(μ₃‐Se)₂(C₅H₅)(CO)₆], was redetermined at room temperature and the correct C2/c space group was assumed instead of the previously reported P space group [Mathur et al. (1995). Organometallics, 14 , 2115–2118]. Analysis of the literature data showed that the previously reported triclinic parameters correspond to a primitive subcell of the actual monoclinic C‐centred cell with cell dimensions close to those found by us. The title compound appeared to be isostructural with the sulfur–selenium analogue.     

Bis(dimethyl sulfoxide‐S)tetrakis(μ‐p‐hydroxybenzoato‐O:O′)dirhodium(II)–tetrakis(μ‐butyrato‐O:O′)bis(dimethyl sulfoxide‐S)dirhodium(II) cocrystal ethanol disolvate

The title structure, [Rh₂(C₇H₅O₃)₄(C₂H₆OS)₂]·[Rh₂(C₄H₇­O₂)₄(C₂H₆OS)₂]·2C₂H₆O, contains two discrete neutral Rh–Rh dimers cocrystallized as the ethanol disolvate. Each dimer is situated on an inversion center. The butyrate chain displays disorder in one C‐atom position. In each dimer, the di­methyl sulfoxide ligand (dmso) is bound via S, as expected. The ethanol is a hydrogen‐bond acceptor for one p‐hydroxy­benzoate hydroxyl group and acts as a hydrogen‐bond donor to the dmso O atom of a neighboring p‐hydroxy­benzoate dirhodium complex. A third hydrogen bond is formed from the other p‐hydroxy­benzoate hydroxyl group to the dmso O atom of a butyrate–dirhodium complex.     

(μ‐Tri‐tert‐butoxysilanethiol­ato)­bis[(tetra­hydro­furan)lithium(I)] and catena‐poly[[bis­(μ‐tri‐tert‐butoxy­silanethiol­ato)dilithium(I)]‐μ‐dimethoxy­ethane]: solvent coordination as the structure‐forming factor

The title compounds, μ‐(tri‐tert‐butoxy­silanethiol­ato‐κ²S:S)‐bis[(tetra­hydro­furan‐κO)lithium(I)], [Li₂(C₁₂H₂₇O₃SSi)₂(C₄H₈O)₂], (I), and catena‐poly[[bis­(μ‐tri‐tert‐butoxysilanethiol­ato)‐1:2κ²S;1κS:2κS,O‐dilithium(I)]‐μ‐dimethoxy­ethane‐κ²O:O′], [Li₂(C₁₂H₂₇O₃SSi)₂(C₄H₁₀O₂)]_n, (II), were obtained by the reaction of tri‐tert‐butoxy­silanethiol with metallic lithium. The crude product, when recrystallized from tetra­hydro­furan (THF) yields (I), and when recrystallized from 1,2‐dimethoxy­ethane (DME) gives (II). Compound (I) forms centrosymmetric dimers in the solid state with an Li₂S₂ central core, whereas (II) forms infinitely long chains, in which the centrosymmetric dimeric units are linked together by the bidentate DME ligand (also residing on an inversion centre), thus forming a coordination polymer. The formation of a one‐dimensional structure in (II) is a consequence of replacement of a monodentate THF solvent mol­ecule with a bidentate DME mol­ecule.     

μ‐Aqua‐penta­aqua­[μ‐3,6‐bis(6‐methyl‐2‐pyridyl)­pyridazine]­chloro­dinickel(II) trichloride trihydrate

The title compound, μ‐aqua‐1:2κ²O‐penta­aqua‐1κ²O,2κ³O‐μ‐3,6‐bis(6‐methyl‐2‐pyridyl)­pyridazine‐1κ²N¹,N⁶:2κ²N²,N³‐chloro‐1κCl‐dinickel(II) trichloride trihydrate, [Ni₂Cl(C₁₆H₁₄­N₄)(H₂O)₆]Cl₃·3H₂O, consists of two Ni^II atoms, a 3,6‐bis(6‐methyl‐2‐pyridyl)­pyridazine mol­ecule, four Cl atoms and nine water mol­ecules. The two Ni atoms are octahedrally coordinated by N and Cl atoms, and by water mol­ecules, and the three six‐membered rings, a pyridazine and two picolines, are planar to within 0.181 (3) Å. The crystal structure is stabilized by an intra‐ and intermolecular hydrogen‐bonding scheme involving water–water and water–chlorine interactions.     

catena‐Poly[[tetra­kis(μ‐propionato‐κ2O:O′)dicopper(II)]‐μ‐3‐pyridylmethanol‐κ2N:O‐[bis­(propionato‐κO)bis­(3‐pyridylmethanol‐κN)copper(II)]‐μ‐3‐pyridylmethanol‐κO:N]

The title compound, [Cu₃(C₃H₅O₂)₆(C₆H₇NO)₄]_n, is composed of polymeric chains formed by alternating centrosymmetric Cu₂(μ‐CH₃CH₂CO₂)₄ and Cu(C₃H₅O₂)₂(C₆H₇NO)₂ units. These elemental units are linked by two bridging 3‐pyridylmethanol (3PM) ligands. The Cu₂(μ‐CH₃CH₂CO₂)₄ group presents a centrosymmetric tetra­bridged structure with four syn–syn bridging propionate ligands to which two 3PM mol­ecules are bonded (through N), occupying the apical positions of each square‐pyramidal polyhedron around the Cu^II ions. The remaining mononuclear group is centred around a third Cu^II ion, which lies on a symmetry centre and is bound to two monodentate propionate groups (through O), two monodentate 3PM mol­ecules (through N) and two bridging 3PM mol­ecules (through O), thus completing a square‐bipyramidal CuO₂N₂O₂ coordination.     

Linear chains in polymeric di­cyclo­hexyl­ammonium tri­butyl­(4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato)­stannate and methyl­phenyl­ammonium tri­butyl(pyridine‐2,6‐di­carboxyl­ato)­stannate containing trigonal bipyramidal tin

catena‐Poly­[di­cyclo­hexyl­ammonium [tri­butyl­tin‐μ‐(4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato‐O²:O⁶)]], (C₁₂­H₂₄N)­[Sn(C₇­H₂­O₆)(C₄H₉)₃], consists of 4‐oxo‐4H‐pyran‐2,6‐di­carboxyl­ato groups that axially link adjacent tri­butyl­tin units into a linear polyanionic chain. The ammonium counter‐ions surround the chain, and each cation forms a pair of hydrogen bonds to the double‐bond carbonyl O atoms of the same dianionic group. The chain propagates in a zigzag manner along the c axis of the monoclinic cell. In catena‐poly­[methyl­(phenyl)­ammonium [tri­butyl­tin‐μ‐(pyridine‐2,6‐di­carboxyl­ato‐O²:O⁶)]], (C₇H₁₀N)­[Sn(C₇H₃NO₄)­(C₄H₉)₃], the pyridine‐2,6‐di­carboxyl­ato groups also link the tri­butyl­tin groups into a chain, but the hydrogen‐bonded chain propagates linearly on the ac face of the monoclinic cell.