改性离子液体中异丁烷与丁烯的烷基化反应

向由无水三氯化铝和盐酸三乙基胺合成的离子液体中溶入不同过渡金属（铜、铁、锌等）离子，考察它们对离子液体催化异丁烷与丁烯烷基化反应性能的影响。结果表明：过渡金属离子的加入能不同程度地影响离子液体的催化性能。溶入Cu2+和Cu+后，离子液体的催化性能有显著的改善，当Cu2+的摩尔加入量为三氯化铝的5%时，烷基化油收率达到丁烯体积的178%，对C8的选择性为75%，烷基化油辛烷值（RON）为92.2，并且离子液体可以重复使用。     

Synthesis of homoallyl ethers via allylation of acetals in ionic liquids catalyzed by trimethylsilyl trifluoromethanesulfonate

The chemoselective allylation of acetals using allyltrimethylsilane in ionic liquids is catalyzed by TMS triflate (5.0-20.0 mol %). The reaction proceeds smoothly at room temperature to afford the corresponding homoallyl ether in good yield. Since the ionic liquids are easily recovered and recycled, they are a useful alternative to dichloromethane, which is the commonly used solvent for allylations. [reaction--see text]     

功能化苯并咪唑类离子液体的合成及性质

合成了一系列由磺酸基、 羧基修饰的新型功能化苯并咪唑类离子液体, 采用IR, ¹H NMR, ¹³C NMR和ESI-MS对其结构进行了表征, 研究了化合物的热稳定性、 电导率以及室温下在各种溶剂中的溶解性等性质. 结果表明, 该类离子液体在 280 ℃以下基本没有失重, 热稳定性较好; 在水溶液浓度为1×10^-3 mol/L时, 随着温度的升高, 电导率几乎与温度呈正比增大; 能与大多数有机溶剂互溶, 溶解性随着溶剂极性的增加而增大.     

胍盐离子液体捕获CO2温室气体的机理

通过量子力学与分子动力学对胍盐离子液体的模拟表明,胍阳离子与氯负离子之间存在较强的相互作用,其相互作用能约为-109．216kcal／m01．从能量与几何分布可见,两种空间分布方式中最稳定构象为Middle作用模式．径向分布函数也验证了这一结论．C02含量的不断增加并没有对离子液体的结构产生影响,而是被离子液体的空腔捕获．     

Highly efficient and reversible SO2 capture by tunable azole-based ionic liquids through multiple-site chemical absorption

A novel strategy for SO(2) capture through multiple-site absorption in the anion of several azole-based ionic liquids is reported. An extremely high capacity of SO(2) (>3.5 mol/mol) and excellent reversibility (28 recycles) were achieved by tuning the interaction between the basic anion and acidic SO(2). Spectroscopic investigations and quantum-mechanical calculations showed that such high SO(2) capacity originates from the multiple sites of interaction between the anion and SO(2). These tunable azole-based ionic liquids with multiple sites offer significant improvements over commonly used absorbents, indicating the promise for industrial applications in acid gas separation.     

Measurement of SO2 solubility in ionic liquids

Measurements of the solubility of sulfur dioxide (SO(2)) in the ionic liquids 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf(2)N]) and 1-n-hexyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide ([hmpy][Tf(2)N]) at temperatures from 25 to 60 degrees C and pressures up to 4 bar indicate that large amounts (up to 85 mol %) of SO(2) dissolve in ionic liquids by simple physical absorption.     

Supported absorption of CO2 by tetrabutylphosphonium amino acid ionic liquids

A new type of "task specific ionic liquid", tetrabutylphosphonium amino acid [P(C4)4][AA], was synthesized by the reaction of tetrabutylphosphonium hydroxide [P(C4)4][OH] with amino acids, including glycine, L-alanine, L-beta-alanine, L-serine, and L-lysine. The liquids produced were characterized by NMR, IR spectroscopies, and elemental analysis, and their thermal decomposition temperature, glass transition temperature, electrical conductivity, density, and viscosity were recorded in detail. The [P(C4)4][AA] supported on porous silica gel effected fast and reversible CO2 absorption when compared with bubbling CO2 into the bulk of the ionic liquid. No changes in absorption capacity and kinetics were found after four cycles of absorption/desorption. The CO2 absorption capacity at equilibrium was 50 mol % of the ionic liquids. In the presence of water (1 wt %), the ionic liquids could absorb equimolar amounts of CO2. The CO2 absorption mechanisms of the ionic liquids with and without water were different.     

UV-light induced photodegradation of bisphenol a in water: Kinetics and influencing factors

The synthesis of dimethyl carbonate (DMC) from methanol and ethylene carbonate (EC) without using any solvent was investigated in the presence of ionic liquids as catalysts. The conversion of ethylene carbonate was affected by the structure of ionic liquid. For a series of 1-alkyl-3-methylimidazolium ionic liquids, the one with shorter alkyl chain and the one with more nucleophilic anion showed higher reactivity. The conversion of EC also increased with CO₂ pressure and reaction temperature. Esterification of EC and methanol can be considered as a pseudo-first order reaction with respect to EC concentration. The activation energy was estimated as 50.1 kJ/mol.     

Solvation of 1-butyl-3-methylimidazolium hexafluorophosphate in aqueous ethanol--a green solution for dissolving 'hydrophobic' ionic liquids

The relatively hydrophobic ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate has been found to be totally miscible with aqueous ethanol between 0.5 and 0.9 mol fraction ethanol, whereas the ionic liquid is only partially miscible with either pure water or absolute ethanol; the ability to dissolve 1-butyl-3-methylimidazolium hexafluorophosphate in a 'green' aqueous solvent system has important implications for cleaning, purification, and separations using ionic liquids.     

Experimental nibble for computational chemists: On the construction and CO2 capture by different zeolite imidazole ester framework-8 and ionic

The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO₂) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO₂ capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO₂ absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO₂ capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO₂ capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO₂ capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.     

In silico study of remdesivir with and without ionic liquids having different cations using DFT calculations and molecular docking

The new coronavirus is trying best to kill the humanity with its highly infectious nature and its first infection was reported in 2019; later this infection was named as COVID-19. Health-care systems are still the using repurposing drugs to cure the patients from this infection. Remdesivir is found to have good potential to cure the patients from this infection and is being extensively used during the 1^st and 2^nd wave of COVID-19. Therefore, in the present work, authors have studied the interaction of remdesivir with different ionic liquids with change in cations using density functional theory calculation in gaseous and water. Based on the DFT calculations, it was found that remdesivir interacts effectively with different ionic liquids based on the energy; further, the change in free energy for Remdesivir-[Bet-ester][Lev] (1) was found to be ?3223.5758 and ?3223.6533 hartree per particle in gaseous and water respectively and most stable; further, 2 and 3 have the comparable free energies. Further, the potential of remdesivir with and without ionic liquids against the main protease of SARS-CoV-2 was investigated using molecular docking. Results revealed that Remdesivir-[Chol][Lev] (2) and Remdesivir-[Chol-ether][Lev] (3) have shown promising results with binding energy of ?129.64 ?kcal/mol and ?125.44 ?kcal/mol respectively while Remdesivir [Bet-ester][Lev] (1) have a binding energy of -123.86 kcal/mol. It is important to mention that changing the cations in ionic liquid play an important role in the docking. It is also observed that the ionic liquid having sodium as cation, then the binding energy against Mpro of CoV is poor and even less than the remdesivir alone.     

Hydrogen gas yields in irradiated room-temperature ionic liquids

Yields of H₂ produced by electron beam irradiation were investigated in a series of room-temperature ionic liquids comprising 1-hexyl-3-methylimidazolium, 1-hexyl-4-(dimethylamino)pyridinium, 1-butyl-1-methylpyrrolidinium, triethylammonium or trioctyl(tetradecyl)phosphonium cations associated with bis(trifluoromethylsulfonyl)imide anion. The G(H₂) values ranged from 2.6×10⁻⁸ mol/J for the imidazolium and pyridinium-based ionic liquids to 2.5×10⁻⁷ mol/J for the phosphonium liquid. These results correlate well with yields of gaseous hydrogen in studies of nonionic aliphatic and aromatic organic compounds.     

Methanolysis of poly(lactic acid) (PLA) catalyzed by ionic liquids

Poly(lactic acid) (PLA) was depolymerized by methanol in the presence of a novel catalyst: ionic liquids. It was found that the purification method of the main products in the methanolysis catalyzed by ionic liquids was simpler than that of traditional compounds, such as sulfuric acid. Qualitative analysis indicated that the main product in the methanolysis process was methyl lactate. The influences of experimental parameters, such as the amount of ionic liquids, methanolysis time, reaction temperature, and dosages of methanol on the conversion of PLA, yield of methyl lactate were investigated. Under the optimum conditions, using ionic liquid 1-butyl-3-methylimidazolium acetate ([Bmim][Ac]) as catalyst, results showed that the ionic liquid could be reused up to 6 times without apparent decrease in the conversion of PLA and yield of methyl lactate. The kinetics of the reaction was also investigated. The results indicated that the methanolysis of PLA was a first-order kinetic reaction with activation energy of 38.29 kJ/mol. In addition, a possible catalysis mechanism of the methanolysis of PLA was proposed.     

Choline-based ionic liquids for CO2 capture and conversion

Choline-based ionic liquids(Ch-ILs) with anions possessing interacting sites to attract CO_2 were designed, which could capture CO_2 with capacity 1.0 mol CO_2 per molar IL under ambient conditions. Moreover, this kind of ILs combining with Cu Cl could catalyze the formylation of amines with CO_2/H_2 at 120 °C. Especially, choline imidazolate showed the best performance,affording a series of N-formamides in excellent yields. It was demonstrated that the IL activated CO_2 and the synergistic effect between the IL and Cu Cl resulted in the high activity for catalysing the formylation of amines with CO_2/H_2.     

Dynamic wetting of a fluoropolymer surface by ionic liquids

The spontaneous spreading of ionic liquids on a fluoropolymer surface (Teflon AF1600) in air is investigated by high-speed video microscopy. Six ionic liquids (EMIM BF(4), BMIM BF(4), OMIM BF(4), EMIM NTf(2), BMIM NTf(2) and HMIM NTf(2)) are used as probe liquids. The dependence of the dynamic contact angle on contact line velocity is interpreted with a hydrodynamic model and a molecular-kinetic model. The usefulness of the hydrodynamic model is rather limited. There is a good correspondence between the molecular dimensions of the liquids and the physical parameters of the molecular-kinetic model. The viscous and molecular-kinetic contributions to energy dissipation are calculated, revealing that energy is dissipated in the bulk as well as at the contact line during dynamic wetting. There are wide ramifications of these results in areas ranging from lubrication and biology to minerals processing and petroleum recovery.     

Modeling of the carbon dioxide solubility in imidazolium-based ionic liquids with the tPC-PSAFT equation of state

In this work, an equation of state (EoS) is developed to predict accurately the phase behavior of ionic liquid + CO2 systems based on the truncated perturbed chain polar statistical associating fluid theory (tPC-PSAFT) EoS. This EoS accounts explicitly for the dipolar interactions between ionic liquid molecules, the quadrupolar interactions between CO2 molecules, and the Lewis acid-base type of association between the ionic liquid and the CO2 molecules. Physically meaningful model pure-component parameters for ionic liquids are estimated based on literature data. All experimental vapor-liquid equilibrium data are correlated with a single linearly temperature-dependent binary interaction parameter. The ability of the model to describe accurately carbon dioxide solubility in various 1-alkyl-3-methylimidazolium-based ionic liquids with different alkyl chain lengths and different anions at pressures from 0 to 100 MPa and carbon dioxide fractions from 0 to 75 mol % is demonstrated. In all cases, good agreement with experimental data is obtained.     

新型普鲁士蓝纳米方块-离子液体复合纳米界面协同检测鸟嘌呤

本文利用离子液体(IL)和普鲁士蓝(PB)纳米方块的协同作用测定鸟嘌呤。首先制备了IL-PB修饰电极,用循环伏安法对修饰电极进行了表征。为了使PB自身的信号达到最大,优化了各种制备条件,如IL和PB的比例,KCl溶液和HCl的浓度等。使用制备的修饰电极催化鸟嘌呤,优化了鸟嘌呤的测定条件如B-R缓冲溶液pH值;疏水性离子液体和亲水性离子液体对鸟嘌呤的影响,结果表明疏水性离子液体催化效果更好。该法在最优化条件下检测鸟嘌呤,在4.0×10-7～1.4×10-6 mol/L范围内与氧化峰电流呈现良好的线性关系,检出限为6.0×10-8 mol/L。     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

Measuring the solubilities of ionic liquids in water using ion-selective electrodes

Polyvinyl chloride-plasticized membrane ion-selective electrodes (ISE) based on conventional ion-exchangers have been proposed as a cheap universal tool to measure the solubilities of ionic liquids (ILs) in water. They are applicable for ILs with a wide range of solubilities in water, since the linear range of a potentiometric response spans several orders of magnitude. As an example, we have fabricated and tested ISEs for widely used alkylimidazolium ionic liquids. The aqueous solubilities of four typical ILs have been determined at 21 °C: 0.075±0.001 mol l^–1 (1-butyl-3-methylimidazolium, BMIm, hexafluorophosphate); 0.018±0.001 mol l^–1 (BMIm bis(triflylimide)); 0.054±0.007 mol l^–1 (1-butyl-2,3-dimethylimidazolium, BDMIm, hexafluorophosphate); 0.014±0.001 mol l^–1 (BDMIm bis(triflylimide)).     

Characterizing the structural properties of N,N-dimethylformamide-based ionic liquid: density-functional study

Amide-based ionic liquids are receiving great enthusiasm recently. In this work, the structures of a kind of N,N-dimethylformamide-based (DMF-based) ionic liquid are investigated theoretically by means of density-functional theory methods. Enol and keto forms of the cation with anions are optimized. The enol form of the DMFH+ cation can form three stable configurations of ion pairs with the anion, while the cation of the keto form is unstable and the proton transfer occurs to form three kinds of neutral molecule pairs. Moreover, the neutral pairs are more stable than the ion pairs, and the ion pairs tend to tautomerize to neutral pairs without barriers. It is suggested that the transformation from the ion pairs to neutral pairs may be the first step for decomposition of DMF-based ionic liquids.