Flammability and thermal behaviour of phosphorus-containing polyamides. Copolymers of poly(1,4-phenylene terephthalamide), poly(1,3-phenylene isophthalamide), poly(1,4-phenylene sebacylamide) and poly(1,3-phenylene sebacylamide)

Some flame retardant copolyamides derived from 1,4-phenylenediamine or 1,3-phenylenediamine and N,N′-bis[(dialkoxyphosphinyl)methyl]1,4-benzenediamine with terephthaloyl or isophthaloyl, or sebacoyl dichlorides, are reported. Thermal and thermo-oxidative stability were studied by means of TGA. The influence of chemical structure in enhancing thermo-oxidative resistance of copolyamides was established. In the case of sebacylamides the DSC thermograms were also obtained. The flammabilities of the copolymers were determined by means of the limiting oxygen index; in the case of sebacylamides, the limiting nitrous oxide index was also determined. Comparison of LN₂OI with the LOI in sebacylamides reveals that the action of the flame retardant groups affects mainly the condensed phase decomposition. This view is also supported from the new stage of decomposition revealed in the DTGA thermograms.     

Quiescent and strain-induced crystallization of poly(p-phenylene terephthalamide) from sulfuric acid solution

Quiescent and strain-induced crystallization of poly(p-phenylene terephthalamide) (PPTA) from sulfuric acid solution has been studied. Negative spherulites (SA-PPTA spherulites) are formed from hot concentrated solutions by cooling. The spherulite consists of radiating fibrous lamellae several hundred angstroms wide. The electron diffraction pattern indicates that PPTA molecules are oriented perpendicular to the long axes of the fibrous lamellae and that the [010] or [110] direction of the modification I crystal and [010] direction of the modification II crystal are parallel to the long axes of the fibrous lamellae. The width of the lamellae is much smaller than the chain length of the starting PPTA. It appears that hydrolysis of PPTA during melting crystallization determines the chain length, i.e., the width of the fibrous lamella. Stacked, lamellar structures like “row structures” are formed under shear. The longer axes of the fibrous lamellae are oriented perpendicular to the shear direction. It is confirmed by electron diffraction studies that the PPTA molecules are oriented parallel to the shear direction. Well-developed fibrils with the PPTA molecules oriented to the fibril axis, are formed by adding the SA-PPTA spherulites to water with vigorous stirring.     

Swelling studies of crosslinked poly(p-phenylene terephthalamide) copolymers in sulfuric acid

In an attempt to improve the mechanical properties of extended chain polymers such as poly(p-phenylene terephthalamide) (PPTA), a crosslinkable terephthalic acid derivative (XTA) has been developed which can be incorporated into copolymers in various concentrations and activated after polymerization. The crosslinking of PPTA-co-XTA copolymer particles was investigated through a series of swelling experiments in concentrated H₂SO₄. The data show a systematic decrease in equilibrium swelling with increasing XTA content, indicating the XTA units are in fact acting as crosslink sites. Values for crosslink density were calculated from the Flory-Rehner theory of polymer swelling and compared with previous findings on crosslinked rigid polymer network systems. The effective number of crosslinks per XTA unit (efficiency) predicted by the Flory-Rehner theory increases and then decreases with % XTA. The decrease in crosslinking efficiency at high XTA concentrations is consistent with differential scanning calorimetry data which show the enthalpy of XTA reaction decreasing slightly with % XTA. The deviations at low % XTA may represent a failure of the Flory-Rehner theory to properly describe the rubbery elasticity of extended chain polymers. © 1994 John Wiley & Sons, Inc.     

Thermodynamic properties of poly(2,6-dimethyl-1,4-phenylene ether)

The thermodynamic properties of crystalline and amorphous poly(2,6-dimethyl-1,4-phenylene ether) (PPO

1 Registered trademark of General Electric Company.

polymer, General Electric Co.) have been studied calorimetrically between 80 and 570°K. The calculated configurational entropy of this polymer, of similar magnitude to other glass-forming liquids, is consistent with the combination of an unusually high ratio of T_g/T_m, and a low melting entropy.     

Thermal degradation of aramids: Part I—Pyrolysis/gas chromatography/mass spectrometry of poly(1,3-phenylene isophthalamide) and poly(1,4-phenylene terephthalamide)

The thermal degradation reactions of poly(1,3-phenylene isophthalamide) or Nomex (I) and poly(1,4-phenylene terephthalamide) or Kevlar (II) aramids have been investigated in the temperature range 300–700°C by pyrolysis/gas chromatography/mass spectrometry. The initial degradation products below 400°C of (I) are carbon dioxide and water. At 400°C benzoic acid and 1,3-phenylenediamine are detected. Benzonitrile, aniline, benzanilide, N-(3-aminophenyl)benzamide as well as carbon monoxide and benzene are evolved in the range 430–450°C. The yields of these products increase rapidly in the range 450–550°C. Isophthalonitrile is observed at 475°C and hydrogen cyanide is detected above 550°C, as are other secondary products such as toluene, tolunitrile, biphenyl, 3-cyanobiphenyl and 3-aminobiphenyl. Pyrolysis of (II) below 500°C evolves only water and trace amounts of carbon dioxide. At 520–540°C the following degradation products have been detected: 1,4-phenylenediamine, benzonitrile, aniline, benzanilide and N-(4-aminophenyl)benzamide. These products as well as carbon dioxide and water increase appreciably between 550°C and 580°C; benzoic acid, terephthalonitrile, benzene and 4-cyanoaniline are also detected in this temperature range. Above 590°C, hydrogen, carbon monoxide, hydrogen cyanide, toluene, tolunitrile, biphenyl, 4-aminobiphenyl and 4-cyanobiphenyl are evolved. Degradation reactions consistent with the formation of these products, which involve initial heterolytic cleavage of the amide linkage for (I) and initial homolytic cleavage of the aromatic NH and amide bonds for (II), are described.     

Water insoluble polyacrylamide part VI: Dilute solution properties of poly(N-acryloyl-m-aminobenzoic acid)

A high molecular weight poly(N-acryloyl-m-aminobenzoic acid) (PMAB) was synthesized in a mixed solvent medium by radical polymerization. The polymer was separated into different fractions by fractional precipitation. All those eight fractions were characterized by viscometry, vapor pressure osmometry and gel permeation chromatography. Mark-Houwink-Kuhn-Sakurada relationships were established for three different solvents at 30°C. Unperturbed dimensions were estimated from the viscosity-molecular weight data using graphical methods based on approximate theories of Stockmayer and Fixman, and of Kurata, Stockmayer, and Roig, and on a first-order perturbation treatment of the excluded volume effect. The results indicate that the PMAB chain is of intermediate stiffness.     

Hydrophobically modified polyelectrolytes I. Dilute solution properties of fluorocarbon-containing poly (acrylic acid)

Dilute solution viscosity of fluorocarbon‐containing hydrophobically modified poly (acrylic add) was measured in aqueous solutions of various NaCl concentrations. The intrinsic viscosity ([η]) and Huggins coefficient (k_H) were evaluated using Huggins equations. It is found that, at low Nacl concentration, the modified polymers exhibit values of intrinsic viscosity ([η]) and Huggins coefficient (k_H) similar to those of unmodified polymers. For both of the modified and unmodified polymers, the intrinsic viscosity decreases with increase of NaCl concentration, while the Huggins coefficient increases upon addition of NaCl. But the variation of [η] and k_H is more significant for the modified polymers, which reflects the enhanced intra‐ and intermolecular hydrophobic association at higher Nacl concentration.     

Dilute solution properties of tactic poly(2-hydroxyethyl methacrylate)

Isotactic and syndiotactic poly(2-hydroxyethyl methacrylate) (PHEMA) have been prepared. Intrinsic viscosity–molecular weight relationships were established for the isotactic and syndiotactic PHEMA in N,N-dimethylformamide (DMF) at 25°C by solution viscometry and light scattering. The unperturbed dimensions and interaction parameters were examined in DMF, water, methanol, ethanol, and water–methanol (1:7 by volume) mixture for isotactic PHEMA and in DMF, methanol, and water–methanol (1:7 by volume) mixture for syndiotactic PHEMA using the Stockmayer–Fixman representation. The results suggest that the compact random coil structure for isotactic PHEMA occurs in water solvent and the isotactic PHEMA is more highly extended in polar solvents.     

Dilute solution properties of poly(styrene acrylonitrile) alternating copolymer

Kuhn-Mark-Houwink-Sakurada relations were obtained in methyl ethyl ketone N,N-di-methylformamide and dichlorethane at 30 for (styrene acrylonitrile) alternating copolymer. The values of the unperturbed dimensions. [K₀ or (r_o^?2/M)^1/2] and conformational parameter σ have been determined, using several graphical and semiempirical methods, and the results were compared with the direct determinations in a θ solvent. The best values for K_θ were obtained using the methods of Stockmayer-Fixman and Inagaki-Suzuki-Kurata. By comparing the values of σ for polystyrene, polyacrylonitrile, random and alternating (styrene-acrylonitrile) copolymers, it is to be concluded that the short-range interactions do not markedly influence the chain dimensions in solutions for random and alternating (styrene-acrylonitrile) copolymers.     

Transitions and relaxations in poly(1,4-phenylene ether)

Transitions and relaxation phenomena in poly(1,4-phenylene ether) were studied over temperature range from 100 to 800°K by applying a combination of calorimetric, dilatometric, dynamic mechanical, and dielectric techniques. Amorphous polymer, exhibiting no x-ray crystallinity, is obtained only by quenching molten samples at extremely fast cooling rates (ca. 1000°C/sec) and by minimizing thermal gradients within specimens. A weakly active mechanical relaxation region with a loss maximum at 155°K of unknown origin was observed. The glass transition interval of completely amorphous polymer is characterized by a discontinuous jump in heat capacity of 2.76 cal/deg per chain segment occurring at 363°K (corrected for kinetic effects), and a fourfold increase in the coefficient of linear thermal expansion. Strongly active, dynamic mechanical relaxations occur in the T_g interval with a loss maximum at 371°K (f = 110 cps) and resulting in a drop in the dynamic storage modulus from 10¹¹ to 10⁹ dyne/cm². Cold crystallization takes place just above T_g, to yield a polymer with an x-ray crystallinity of 0.7 and a heat of crystallization of 270 cal/mole. The crystalline polymer shows a complex melt structure. Depending upon the thermal history, multiple endothermic peaks indicative of structural reorganizations occur just prior to fusion. Very high dielectric losses with a wide distribution of relaxation times were observed in the melt interval. The mechanical relaxation spectrum in this region is typical of viscous flow behavior.     

Unperturbed dimensions of poly(2-methyl-6-phenyl-1,4-phenylene oxide) and poly(2,6-diphenyl-1,4-phenylene oxide) chains

The unperturbed chain dimensions of unfractionated poly(2-methyl-6-phenyl-1,4-phenylene oxide) and poly-(2,6-diphenyl-1,4-phenylene oxide) have been measured by combining molecular weight data from light scattering with intrinsic viscosity data in chloroform. The unperturbed chain dimensions of the former polymer were also measured directly by light scattering dissymmetry in a critical consolute solvent mixture (methyl cyclohexane: 1,4-dioxane 50:50 by volume). The results of these measurements and of measurements reported by other investigators are satisfactorily explained by postulating no dimension-expanding prejudice in azimuthal angle in chain conformers of the 2,6-substituted-1,4-phenylene oxide polymers. This corresponds to equal population of the two chain rotation energy minima at azimuthal angles 90° and 270°. Accepting this postulate, one calculates from the observed chain dimensions that the C? O? C bond angle is 118–120° in these aromatic polyethers in solution.     

Thermal degradation of aramids—Part II: Pyrolysis/gas chromatography/mass spectrometry of some model compounds of poly(1,3-phenylene isophthalamide) and poly(1,4-phenylene terephthalamide)

The thermal degradation reactions of seven aromatic amides which are structurally related to the commercial aramids Kevlar (poly(1,4-phenylene terephthalamide)) and Nomex (poly(1,3-phenylene isophthalamide) have been investigated in the temperature range 450 to 700°C by pyrolysis/gas chromatography/mass spectrometry. Benzanilide, N,N′-dibenzoyl-1,4-phenylenediamine, N,N′-dibenzoyl-1,3-phenylenediamine, N,N′-diphenylterephthalamide, N,N′-diphenylisophthalamide, N-(4-aminophenyl)-benzamide and N-(3-aminophenyl)benzamide all gave very low yields of carbon oxides and water. The structures of the higher molecular weight products were related to those of the parent compounds and their yields are presented quantitatively. The principal mechanism for thermal cleavage of the amide bonds in the N,N′-dibenzoylphenylenediamines is mainly heterolytic, while for the other compounds thermal cleavage of the amide bonds is homolytic. The relationship between the pyrolysis products of the model compounds and those of the corresponding aramids is discussed.     

Dilute solution properties and molecular characterization of poly(butyl methacrylate-co-styrene)

Dilute solution properties of fractionated poly(butyl methacrylate-co-styrene) PBMAS prepared by bulk polymerization, have been investigated by means of light scattering, viscometry, and osmometry. As the composition heterogeneity was narrow, the characterization of the copolymer was effected in a single solvent by light scattering. Infrared and nuclear magnetic resonance spectra were used to determine the composition and sequence distribution of monomer units of the copolymer. The molecular weight dependence of the limiting viscosity number and of the root-mean-square end-to-end distance have been established. The Mark-Houwink relation showed that methylethyl ketone is a good solvent compared with cyclohexane. The validity of various extrapolation procedures that have been proposed to calculate the unperturbed dimensions have been examined. Root-mean-square end-to-end distances have been calculated from the Debye-Bueche and Kirkwood-Riseman methods and compared with the experimental values. The molecular weight dependence of the second virial coefficient agreed well with that calculated from the Orofino-Flory equation. The value of the steric hindrance parameter σ for the copolymer has been found to be 2.27 compared to 2.05 for poly(butyl methacrylate) and 2.22 for polystyrene, which indicates that PBMAS is a stiffer chain in solution than those of the constituent homopolymers.     

Model reactions for preparing poly(imino-tetrafluoro-1,4-phenylene)

2,3,4,5,6-Pentafluoroformanilide was prepared giving, in addition, two new compounds 4,5,6,7-tetrafluoro-1-pentafluorophenyl-benzimidazole and 2,3,4,5-tetrafluoro-6-[(pentafluorophenyl)amino]formanilide. Sodium 2,3,4,5,6-pentafluoro-formanilide was reacted with hexafluorobenzene in a molar ratio of 1:4 to give oligomers of α-pentafluorophenyl-ω-fluoro-poly(imino-tetrafluoro-1,4-phenylene). Some of the oligomers were isolated. The results indicate that poly(imino-tetrafluoro-1,4-phenylene) could be formed. Model reaction on hexafluorobenzene with sodium acetanilide, molar ratio 1:2, gave a low yield of N,N′-diacetyl-diphenyl-tetrafluoro-1,4-phenylenediamine.     

Pressure-volume-temperature properties of blends of poly(2,6-dimethyl-1,4-phenylene ether) with polystyrene

The pressure-volume-temperature (PVT) properties of blends of poly(2,6-dimethyl-1,4-phenylene ether) (PPO) with polystyrene (PS) have been studied experimentally in both the glassy and melt states at 0, 20, 40, 50, 60, 80, and 100% PPO content. In all compositions a strong glass transition was observed varying linearly with composition. For all but the 40% PPO composition this was the only transition, indicating molecular compatibility of the components in these blends. The 40% PPO composition showed a very weak second transition near the glass transition of pure PS. A small amount of phase separation may have occurred in this blend. The data for the glassy and melt states were fitted to an empirical equation of state based on the Tait equation. The volume of the melts at constant pressure and temperature showed a virtually linear dependence on composition. Any negative excess volume of mixing compatible with the data would have to be very small, smaller than expected from previous measurements in the glassy state. Various properties relating to the glassy and melt states and to the glass transition were evaluated and are discussed as a function of composition. It was found that most properties of the glasses could not be modeled by simple functions of composition.     

Thermal behaviour of poly(2,6-dimethoxy-1,4-phenylene ether)

Thermodynamic properties of semicrystalline and completely amorphous samples of poly(2,6-dimethoxy-1,4-phenylene ether) have been studied by DSC-calorimetry. A very low entropy of fusion indicates that only minor conformational changes take place during the melting. The low value of the configurational entropy of the glass transition is due to the faci that the theoretical second order transition is closely related to the glass transition point.     

Preparation of poly(1,4-phenylene)s by electro-oxidative polymerization

The effect of substituents on the electropolymerization of benzene derivatives and the redox properrties of the corresponding polymers were determined using Brown's substituent constants (σ⁺). Electron-donating groups lower the oxidation potential by which increase in the current efficiency was observed. However, stabilization of the produced cation radicals by the electron-donating groups resulted in a decrease in the polymerization efficiency. The appropriate values of σ⁺ for the efficient polymerization ranged near ?1.5.     

Direct metalation of poly(2,6-dimethyl-1,4-phenylene ether)

Poly(2,6-dimethyl-1,4-phenylene ether) (I) was metalated with butyllithium in tetrahydrofuran and with the N,N,N′,N′-tetramethylethylenediamine complex of butyllithium in a variety of solvents. In these cases, metalation occurred at both the ring and side chain positions, the former being preferred initially. Subsequently, there was an isomerization in favor of the side chain. At 25°C, there is no significant amount of polymer scission or crosslinking during metalation, but some crosslinking occurs on derivatizing with dimethyl sulfate and trimethylchlorosilane for high extents of ring metalation. With sodium and potassium alkyls, only side-chain metalation was observed. The metalated polymer reacts as a typical organometallic, allowing polymer modification by a wide variety of reactions.