Voltammetry and in situ scanning tunnelling microscopy of de novo designed heme protein monolayers on Au(111)-electrode surfaces

In the present work, we report the electrochemical characterization and in situ scanning tunnelling microscopy (STM) studies of monolayers of an artificial de novo designed heme protein MOP-C, covalently immobilized on modified Au(111) surfaces. The protein forms closely packed monolayers, which remain electroactive upon immobilization. In situ STM images show circular structures indicating that MOP-C stands upright on the surface in accordance with the molecular design. Despite the large spatial extension of MOP-C, about 5 nm in height, conditions could be found where tip/sample interaction is minimal and proteins could be imaged without detectable tip interference. The results indicate further that the structural sensitivity of (in situ) STM depends to a significant extent on associated electron transfer kinetics. In the present case, the heme group does not contribute significantly to the tunnelling current, apparently due to slow electron transfer kinetics. As a consequence, STM images of heme-containing and heme-free MOP-C did not reveal any notable differences in apparent height or physical extension. The apparent height of heme-containing MOP-C did not show any dependence on the substrate potential being varied around the redox potential of the protein. The mere presence of an accessible molecular energy level is not sufficient to result in detectable tunnelling current modulation.     

Electron transfer dynamics of cytochrome c bound to self-assembled monolayers on silver electrodes.

Cytochrome c (Cyt-c) was electrostatically immobilised on Ag electrodes coated with self-assembled monolayers (SAM) that are formed by omega-carboxyl alkanethiols with different alkyl chain lengths (C(x)). Surface enhanced resonance Raman (SERR) spectroscopy demonstrated that electrostatic binding does not lead to conformational changes of the heme protein under the conditions of the present experiments. Employing time-resolved SERR spectroscopy, the rate constants of the heterogeneous electron transfer (ET) between the adsorbed Cyt-c and the Ag electrode were determined for a driving force of zero electronvolts. For SAMs with long alkyl chains (C(16), C(11)), the rate constants display a normal exponential distance dependence, whereas for shorter chain lengths (C(6), C(3), C(3)), the ET rate constant approaches a constant value (ca. 130 s(-1)). The onset of the non-exponential distance-dependence is paralleled by an increasing kinetic H/D effect, indicating a coupling of the redox reaction with proton transfer (PT) steps. This unusual kinetic behaviour is attributed to the effect of the electric field at the Ag/SAM interface that increasingly raises the energy barrier for the PT processes with decreasing distance of the adsorbed Cyt-c from the electrode. The distance-dependence of the electric field strength is estimated on the basis of a simple electrostatic model that can consistently describe the redox potential shifts of Cyt-c as determined by stationary SERR spectroscopy for the various SAMs. At low electric fields, PT is sufficiently fast so that rate constants, determined as a function of the driving force, yield the reorganisation energy (0.217 electronvolts) of the heterogeneous ET.     

Dense monolayers of metal-chelating ligands covalently attached to carbon electrodes electrochemically and their useful application in affinity binding of histidine-tagged proteins

In this work, monolayers of metal complexes were covalently attached to the surface of carbon electrodes with the goal of binding monolayers of histidine-tagged proteins with a controlled molecular orientation and a maintained biological activity. In this novel method, which is simple, versatile, and efficient, the covalent attachment was accomplished in a single step by the electrochemical reduction of aryl diazonium ions that were substituted with a nitrilotriacetic (NTA) or an imminodiacetic (IDA) ligand at the para position. The transient aryl radicals that were generated in the reduction were grafted to the surfaces of glassy carbon, highly oriented pyrolitic graphite, and graphite-based screen-printed electrodes, producing dense monolayers of the ligands. The NTA- and IDA-modified electrodes were shown to efficiently chelate Cu(II) and Ni(II) ions. The presence of the metal was established using X-ray photoelectron spectroscopy and electrochemistry. Surface coverages of the ligands were indirectly determined from the electroactivity of the copper(II) complex formed on the electrode surface. Studies on the effect of electrodeposition time and potential showed that, at sufficiently negative potentials, the surface coverage reached a saturating value in less than 2 min of electrodeposition time, which corresponds to the formation of a close-packed monolayer of ligand on the electrode surface. Once loaded with a metal ion, the modified electrode was able to bind specifically to histidine-tagged proteins such as the horseradish peroxidase (His-HRP) or to an enhanced, recombinant green-fluorescent protein via its N-terminal hexahistidine tail. In the case of His-HRP, the amount of active enzyme specifically immobilized by metal-chelating binding was determined from the analysis of electrocatalytic currents using cyclic voltammetry. The electrochemical grafting makes it possible to accurately controlled and electronically address the amount of deposited ligand on the conductive surfaces of carbon electrodes with any size and shape.     

High‐Quality Covalently Grafting Hemoglobin on Gold Electrodes: Characterization,Redox Thermodynamics and Bio‐electrocatalysis

Herein, we report a versatile surface chemistry methodology to covalently immobilize ligands and proteins to self‐assembled monolayers (SAMs) on gold electrode. The strategy is based on two steps: 1) the coupling of soluble azido‐PEG‐amimo ligand with an alkynyl‐terminated monolayer via click reaction and 2) covalent immobilization hemoglobin (Hb) to the amine‐terminated ligand via carbodiimide reaction. Surface‐enhanced Raman scattering spectroscopy (SERS), atomic force microscopy (AFM), reflection absorption infrared spectroscopy (RAIR) and cyclic voltammetry are used to characterize the model interfacial reactions. We also demonstrate the excellent biocompatibility of the interface for Hb immobilization and reliable application of the proposed method for H₂O₂ biosensing. Moreover, the redox thermodynamics of the Fe³⁺/Fe²⁺ couple in Hb is also investigated.     

Immobilization of peroxidase glycoprotein on gold electrodes modified with mixed epoxy-boronic Acid monolayers

The development of bioelectronic enzyme applications requires the immobilization of active proteins onto solid or colloidal substrates such as gold. Coverage of the gold surface with alkanethiol self-assembled monolayers (SAMs) reduces nonspecific adsorption of proteins and also allows the incorporation onto the surface of ligands with affinity for complementary binding sites on native proteins. We present in this work a strategy for the covalent immobilization of glycosylated proteins previously adsorbed through weak, reversible interactions, on tailored SAMs. Boronic acids, which form cyclic esters with saccharides, are incorporated into SAMs to weakly adsorb the glycoprotein onto the electrode surface through their carbohydrate moiety. To prevent protein release from the electrode surface, we combine the affinity motif of boronates with the reactivity of epoxy groups to covalently link the protein to heterofunctional boronate-epoxy SAMs. The principle underlying our strategy is the increased immobilization rate achieved by the weak interaction-induced proximity effect between slow reacting oxyrane groups in the SAM and nucleophilic residues from adsorbed proteins, which allows the formation of very stable covalent bonds. This approach is exemplified by the use of phenylboronates-oxyrane mixed monolayers as a reactive support and redox-enzyme horseradish peroxidase as glycoprotein for the preparation of peroxidase electrodes. Quartz crystal microbalance, atomic force microscopy, and electrochemical measurements are used to characterize these enzymatic electrodes. These epoxy-boronate functional monolayers are versatile, stable interfaces, ready to incorporate glycoproteins by incubation under mild conditions.     

Nanohybrid Materials Consisting of Poly[(3‐aminobenzoic acid)‐co‐(3‐aminobenzenesulfonic acid)‐co‐aniline] and Multiwalled Carbon Nanotubes for Immobilization of Redox Active Cytochrome c

The development of a new surface architecture for the efficient direct electron transfer of positively charged redox proteins is presented. For this reason different kinds of polyaniline terpolymers consisting of aminobenzoic acid (AB), aminobenzenesulfonic acid (ABS) and aniline (A) with different monomer ratios were synthesized. The P(AB‐ABS‐A) were grafted to the surface of multiwalled carbon nanotubes (MWCNTs). FTIR measurements prove the covalent binding to the carboxylic groups of the MWCNTs while conductivity tests show an increase in the conductivity of the nanohybrid in comparison to the polymers. The [MWCNT‐P(AB‐ABS‐A)] nanohybrids were used for the immobilization of redox active cytochrome c (cyt.c). The positively charged protein can electrostatically interact with the negatively charged nanohybrid. Cyclic voltammetry (CV) shows an increase in the protein loading on [MWCNT‐P(AB‐ABS‐A)] coupled to cysteamine modified gold electrodes in comparison to non‐grafted MWCNTs. A further increase in the sulfonation degree of P(AB‐ABS‐A) leads to an enhanced current output of the modified electrodes. The redox activity of the polymer decreases after the immobilization of the cyt.c on the nanohybrid. For the first time polymers covalently grafted to the surface of MWCNTs are used in a biosensor.     

Direct Electrochemistry of Cytochrome c at Modified Si(100) Electrodes

This paper demonstrates the direct electron transfer between the heme moiety of horse hearth cytochrome c and a pyridinyl group on self‐assembled‐monolayer‐modified Si(100) electrodes. Self‐assembled monolayers (SAMs) containing the putative receptor ligand were prepared by a step‐wise procedure using “click” reactions of acetylene‐terminated alkyl monolayers and isonicotinic acid azide derivatives. Unoxidized Si(100) electrodes, possessing either isonicotinate or isonicotinamide receptor ligands, were characterized using X‐ray photoelectron spectroscopy, contact‐angle goniometry, cyclic voltammetry, and electrochemical impedance spectroscopy. The ability of isonicotinic acid terminated layers to coordinatively bind the redox center of cytochrome c was found to be restricted to pyridinyl assemblies with a para‐ester linkage present. The protocol detailed here offers an experimentally simple modular approach to producing chemically well‐defined SAMs on silicon surfaces for direct electrochemistry of a well‐studied model redox protein.     

Spectroscopic Observation of Calcium‐Induced Reorientation of Cellobiose Dehydrogenase Immobilized on Electrodes and its Effect on Electrocatalytic Activity

Cellobiose dehydrogenase catalyzes the oxidation of various carbohydrates and is considered as a possible anode catalyst in biofuel cells. It has been shown that the catalytic performance of this enzyme immobilized on electrodes can be increased by presence of calcium ions. To get insight into the Ca²⁺‐induced changes in the immobilized enzyme we employ surface‐enhanced vibrational (SERR and SEIRA) spectroscopy together with electrochemistry. Upon addition of Ca²⁺ ions electrochemical measurements show a shift of the catalytic turnover signal to more negative potentials while SERR measurements reveal an offset between the potential of heme reduction and catalytic current. Comparing SERR and SEIRA data we propose that binding of Ca²⁺ to the heme induces protein reorientation in a way that the electron transfer pathway of the catalytic FAD center to the electrode can bypass the heme cofactor, resulting in catalytic activity at more negative potentials.     

Electron transfer dynamics of Rhodothermus marinus caa3 cytochrome c domains on biomimetic films

The subunit II of the caa(3) oxygen reductase from Rhodothermus marinus contains, in addition to the Cu(A) center, a c-type heme group in the cytochrome c domain (Cyt-D) that is the putative primary electron acceptor of the enzyme. In this work we have combined surface-enhanced resonance Raman (SERR) spectroelectrochemistry, molecular dynamics (MD) simulations and electron pathway calculations to assess the most likely interaction domains and electron entry/exit points of the truncated Cyt-D of subunit II in the reactions with its electron donor, HiPIP and electron acceptor, Cu(A). The results indicate that the transient interaction between Cyt-D and HiPIP relies upon a delicate balance of hydrophobic and polar contacts for establishing an optimized electron transfer pathway that involves the exposed edge of the heme group and guaranties efficient inter-protein electron transfer on the nanosecond time scale. The reorganization energy of ca. 0.7 eV was determined by time-resolved SERR spectroelectrochemistry. The intramolecular electron transfer pathway in integral subunit II from Cyt-D to the Cu(A) redox center most likely involves the iron ligand histidine 20 as an electron exit point in Cyt-D.     

Integration of Layered Redox Proteins and Conductive Supports for Bioelectronic Applications

Integration of redox enzymes with an electrode support and formation of an electrical contact between the biocatalysts and the electrode is the fundamental subject of bioelectronics and optobioelectronics. This review addresses the recent advances and the scientific progress in electrically contacted, layered enzyme electrodes, and discusses the future applications of the systems in various bioelectronic devices, for example, amperometric biosensors, sensoric arrays, logic gates, and optical memories. This review presents the methods for the immobilization of redox enzymes on electrodes and discusses the covalent linkage of proteins, the use of supramolecular affinity complexes, and the reconstitution of apo-redox enzymes for the nanoengineering of electrodes with protein monolayers of electrodes with protein monolayers and multilayers. Electrical contact in the layered enzyme electrode is achieved by the application of diffusional electron mediators, such as ferrocene derivatives, ferricyanide, quinones, and bipyridinium salts. Covalent tethering of electron relay units to layered enzyme electrodes, the cross-linking of affinity complexes formed between redox proteins and electrodes functionalized with relay-cofactor units, or surface reconstitution of apo-enzymes on relay-cofactor-functionalized electrodes yield bioelectrocatalytic electrodes. The application of the functionalized electrodes as biosensor devices is addressed and further application of electrically "wired" enzymes as catalytic interfaces in biofuel cells is discussed. The organization of sensor arrays, self-calibrated biosensors, or gated bioelectronic devices requires the microstructuring of biomaterials on solid supports in the form of ordered micro-patterns. For example, light-sensitive layers composed of azides, benzophenone, or diazine derivatives associated with solid supports can be irradiated through masks to enable the patterned covalent linkage of biomaterials to surfaces. Alternatively, patterning of biomaterials can be accomplished by noncovalent interactions (such as in affinity complexes between avidin and a photolabeled biotin, or between an antibody and a photoisomerizable antigen layer) to provide a means of organizing protein microstructures on surfaces. The organization of patterned hydrophilic/hydrophobic domains on surfaces, by using photolithography, stamping, or micromachining methods, allows the selective patterning of surfaces by hydrophobic, noncovalent interactions. Photoactivated layered enzyme electrodes act as light-switchable optobioelectronic systems for the amperometric transduction of recorded photonic information. These systems can act as optical memories, biomolecular amplifiers, or logic gates. The photoswitchable enzyme electrodes are generated by the tethering of photoisomerizable groups to the protein, the reconstitution of apo-enzymes with semisynthetic photoisomerizable cofactor units, or the coupling of photoisomerizable electron relay units.     

DNA-modified electrodes (Ⅶ)——Preparation and characterization of DNA-bonded and DNA-adsorbed SAM/Au electrodes

Two kinds of DNA-modified electrodes were prepared by covalent and adsorptive immobilization of DNA onto self-assembled monolayers of 2, 2'-dithiodiethanol on gold electrodes and characterized by cyclic voltammetry, Xray photoelectron spectroscopy and scanning tunneling microscopy. The results suggest that the methods are satisfactory for the immobilization of DNA on electrodes.     

Spectroelectrochemical detection of phenothiazine and phenoxazine derivatives covalently bound to self-assembled cystamine monolayers

The phenothiazine derivatives, Toluidine Blue O and Azur A, and the phenoxazine derivative Nile Blue were bound covalently to self-assembled cystamine monolayers chemisorbed on gold electrodes by derivatization of the surface amino groups with two different bifunctional spacers: terephthaloyl chloride and 1,6-hexamethylene-diisocyanate.The formation of the amido- and urea-derivatives of the parent compounds after covalent immobilization induces a shift of their redox potentials towards more positive values which can easily be detected by cyclic voltammetry.UV-Vis difference spectroelectrochemistry has been used to characterize the electroactive species immobilized onto transparent gold electrode surfaces in both oxidation states. In every case, the oxidized-minus-reduced (and reduced-minus-oxidized) difference spectra of the immobilized redox species show a shift of the UV maxima towards longer wavelengths and a shift of the Vis maximum towards shorter wavelengths when compared with their parent compounds. Each redox species showed different optical characteristics depending on the spacer used for immobilization.For phenothiazine derivatives immobilized with 1,6-hexamethylene di-isocyanate the total surface coverages obtained by optical methods were close to those obtained by cyclic voltammetry. However, for the same derivatives immobilized with terephthaloyl chloride, and for Nile Blue, independently of the spacer used, higher surface coverages were found by optical methods than by cyclic voltammetry.     

Direct electrochemistry of Phanerochaete chrysosporium cellobiose dehydrogenase covalently attached onto gold nanoparticle modified solid gold electrodes

Achieving efficient electrochemical communication between redox enzymes and various electrode materials is one of the main challenges in bioelectrochemistry and is of great importance for developing electronic applications. Cellobiose dehydrogenase (CDH) is an extracellular flavocytochrome composed of a catalytic FAD containing dehydrogenase domain (DH(CDH)), a heme b containing cytochrome domain (CYT(CDH)), and a flexible linker region connecting the two domains. Efficient direct electron transfer (DET) of CDH from the basidiomycete Phanerochaete chrysosporium (PcCDH) covalently attached to mixed self-assembled monolayer (SAM) modified gold nanoparticle (AuNP) electrode is presented. The thiols used were as follows: 4-aminothiophenol (4-ATP), 4-mercaptobenzoic acid (4-MBA), 4-mercaptophenol (4-MP), 11-mercapto-1-undecanamine (MUNH(2)), 11-mercapto-1-undecanoic acid (MUCOOH), and 11-mercapto-1-undecanol (MUOH). A covalent linkage between PcCDH and 4-ATP or MUNH(2) in the mixed SAMs was formed using glutaraldehyde as cross-linker. The covalent immobilization and the surface coverage of PcCDH were confirmed with surface plasmon resonance (SPR). To improve current density, AuNPs were cast on the top of polycrystalline gold electrodes. For all the immobilized PcCDH modified AuNPs electrodes, cyclic voltammetry exhibited clear electrochemical responses of the CYT(CDH) with fast electron transfer (ET) rates in the absence of substrate (lactose), and the formal potential was evaluated to be +162 mV vs NHE at pH 4.50. The standard ET rate constant (k(s)) was estimated for the first time for CDH and was found to be 52.1, 59.8, 112, and 154 s(-1) for 4-ATP/4-MBA, 4-ATP/4-MP, MUNH(2)/MUCOOH, and MUNH(2)/MUOH modified electrodes, respectively. At all the mixed SAM modified AuNP electrodes, PcCDH showed DET only via the CYT(CDH). No DET communication between the DH(CDH) domain and the electrode was found. The current density for lactose oxidation was remarkably increased by introduction of the AuNPs. The 4-ATP/4-MBA modified AuNPs exhibited a current density up to 30 μA cm(-2), which is ～70 times higher than that obtained for a 4-ATP/4-MBA modified polycrystalline gold electrode. The results provide insight into fundamental electrochemical properties of CDH covalently immobilized on gold electrodes and promote further applications of CDHs for biosensors, biofuel cells, and bioelectrocatalysis.     

Redox processes of cytochrome c immobilized on solid supported polyelectrolyte multilayers

The heme protein cytochrome c (Cyt-c), immobilized on polyelectrolyte multilayers on a silver electrode, was studied by stationary and time-resolved surface-enhanced resonance Raman (SERR) spectroscopy to probe the redox site structure and the mechanism and dynamics of the potential-dependent interfacial processes. The layers were built up by sequential adsorption of polycations (poly[ethylene imine] (PEI); polyallylamine hydrochloride (PAH)) and polyanions (poly[styrene sulfonate] (PSS)). All multilayers terminated by PSS electrostatically bind Cyt-c. On PEI/PSS coatings, Cyt-c is peripherally bound and fully redox-active. Due to the interfacial potential drop, the apparent redox potential is lowered by 40 mV compared to that in solution. The rate constant for the heterogeneous electron transfer (ET) of ca. 0.1 s(-1) is consistent with electron tunneling through largely ordered PEI/PSS layers. ET is coupled to a reversible conformational transition of Cyt-c that involves a change of the coordination pattern of the heme. Additional (PAH/PSS) double layers cause a broadening of the redox transition and a drastic negative shift of the redox potential, which is attributed to the formation of PSS/Cyt-c complexes. It is concluded that Cyt-c can effectively compete with PAH for binding of PSS, resulting in a rearrangement of the layered structure and a penetration of the PSS-bound Cyt-c into the PAH/PSS double layers. This conclusion is consistent with SERR intensity and quartz microbalance measurements. ET was found to be overpotential-independent and faster than that for PEI/PSS coatings, which is interpreted in terms of specific PSS/Cyt-c complexes serving as gates for the heterogeneous ET.     

Parameters important in fabricating enzyme electrodes using self-assembled monolayers of alkanethiols.

The fabrication of enzyme electrodes using self-assembled monolayers (SAMs) has attracted considerable interest because of the spatial control over the enzyme immobilization. A model system of glucose oxidase covalently bound to a gold electrode modified with a SAM of 3-mercaptopropionic acid was investigated with regard to the effect of fabrication variables such as the surface topography of the underlying gold electrode, the conditions during covalent attachment of the enzyme and the buffer used. The resultant monolayer enzyme electrodes have excellent sensitivity and dynamic range which can easily be adjusted by controlling the amount of enzyme immobilized. The major drawback of such electrodes is the response which is limited by the kinetics of the enzyme rather than mass transport of substrates. Approaches to bringing such enzyme electrodes into the mass transport limiting regime by exploiting direct electron transfer between the enzyme and the electrode are outlined.     

High Electromagnetic Field Enhancement of TiO2 Nanotube Electrodes

We present the fabrication of TiO₂ nanotube electrodes with high biocompatibility and extraordinary spectroscopic properties. Intense surface‐enhanced resonance Raman signals of the heme unit of the redox enzyme Cytochrome b₅ were observed upon covalent immobilization of the protein matrix on the TiO₂ surface, revealing overall preserved structural integrity and redox behavior. The enhancement factor could be rationally controlled by varying the electrode annealing temperature, reaching a record maximum value of over 70 at 475 °C. For the first time, such high values are reported for non‐directly surface‐interacting probes, for which the involvement of charge‐transfer processes in signal amplification can be excluded. The origin of the surface enhancement is exclusively attributed to enhanced localized electric fields resulting from the specific optical properties of the nanotubular geometry of the electrode.     

Immobilization of histidine-tagged proteins on electrodes

The development of new enzyme immobilization techniques that do not affect catalytic activity or conformation of a protein is an important research task in biotechnology including biosensor applications and heterogeneous reaction systems. One of the most promising approaches for controlled protein immobilization is based on the immobilized metal ion affinity chromatography (IMAC) principle originally developed for protein purification. Here we describe the current status and future perspectives of immobilization of His-tagged proteins on electrode surfaces. Recombinant proteins comprising histidine-tags or histidine rich native proteins have a strong affinity to transition metal ions. For metal ion immobilization at the electrode surface different matrices can be used such as self-assembled monolayers or conductive polymers. This specific technique allows a reversible immobilization of histidine-tagged proteins at electrodes in a defined orientation which is an important prerequisite for efficient electron transfer between the electrode and the biomolecule. Any application requiring immobilized biocatalysts on electrodes can make use of this immobilization approach, making future biosensors and biocatalytic technologies more sensitive, simpler, reusable and less expensive while only requiring mild enzyme modifications.     

New degenerate metal-oxide electrodes for nearly reversible direct electron transfer to the redox proteins

Heavily doped cadmium tin oxide (CTO) film electrodes were developed for fast electron exchange with redox proteins. The metal oxide films showed nearly reversible electron transfer for the [2Fe–2S] proteins spinach ferredoxin (Sp fd) and putidaredoxin (Pdx), and the well-studied heme protein horse heart cytochrome c. These represent a family of proteins that are of comparable size, but vary significantly in overall charge, formal redox potential, and type of metal center. The unmediated electron exchange was achieved through variation of metal oxide film synthesis parameters that led to an increase of the charge carrier concentration up to the levels typical for degenerate semiconductors. In addition, the flat band potential of the films was shifted close to or more positive of the formal redox potentials of proteins such that the semiconductor electrodes would be utilized in an accumulation mode. The rates and sustainability of electron transfer for the two ferredoxins obtained on these cadmium tin oxide electrodes are as high or higher than previously reported.     

Carboxyphenyl Covalent Immobilization of Heme Proteins and its Favorable Biocompatible Electrochemical and Electrocatalytic Characteristics

A novel carboxyphenyl covalent immobilization technique has been successfully developed to realize the effective attachment of two typical heme proteins, hemoglobin (Hb) and cytochrome c (Cyt‐c), onto underlying glassy carbon electrode (GCE). Primarily, the GCE surface is functionalized with aromatic 4‐carboxyphenyl (4‐CP) group by the electrochemical reduction of diazonium cations, producing covalently linked carboxyl‐terminated active GCE surface to work as a ‘bridge’. Then, Hb and Cyt‐c are readily attached to GCE through the ‘bridge’ by functional covalently combination between ? NH₂ terminal groups of proteins and ? COOH terminal groups of 4‐CP, obtaining Hb/4‐CP/GCE and Cyt‐c/4‐CP/GCE. On both electrodes, well‐defined peaks attributing to the Fe^III/Fe^II couple of heme group of Hb and Cyt‐c are clearly observed with the electron transfer rate constant (k_s) evaluated to be 2.48±0.05 s^?1 and 2.73±0.05 s^?1, respectively. It is attractive that the formal potential (E°') of the immobilized Hb and Cyt‐c are estimated to be 50 and 100 mV (vs. SCE), respectively, which are closer to the standard redox potential of native Hb and Cyt‐c in solution, owing to the good biocompatibility of 4‐CP groups. The electrodes also exhibit fast response, high sensitivity and well stability for the amperometric detection of H₂O₂ at a fairly mild potential of 0 V without any mediators, obtaining rather small apparent Michaelis‐Menten constant (K_M^app) values of 113 μM for Hb/4‐CP/GCE and 101 μM for Cyt‐c/4‐CP/GCE. All the experimental results indicated that the covalent graft 4‐carboxyphenyl group plays an important role in constructing a “biocompatible bridge” to help the direct electron transfer of Hb and Cyt‐c with favorable biocompatibility and good bio‐ electrocatalytic affinity in virtue of the substituted aryl group only consisting of C, H and O elements, which is similar with the constitutes of organics. It makes the system of functionalized covalent immobilization of proteins onto carbon electrode a promising platform for fabricating the third‐generation biosensors. A new approach for realizing direct electrochemistry of proteins, as well as design of novel bioelectronic devices has been accordingly provided.