Adsorption of monoclonal IgG on polystyrene microspheres

In this paper the adsorption of a monoclonal antibody IgG-1 isotype against HBsAg onto positively and negatively charged polystyrene beads has been studied. To determine the role played by electrostatic forces in the adsorption process different pH values were used. It was confirmed that the affinity of adsorption isotherms depends on the electrostatic interaction between protein and polymer surface. The maximum adsorption amount is located around the i.e.p. of the dissolved protein, and decreases markedly as pH moves away. Thus, the major driving force for adsorption of monoclonal antibodies on polystyrene beads comes from the hydrophobic interaction between the antibody molecules and the adsorbent surface. Desorption of preadsorbed IgG molecules by increasing ionic strength has shown that the positively charged polystyrene is also more hydrophobic in character than the negatively charged one. Finally, electrokinetic experiments have determined that the electric double layer (e.d.l.) of monoclonal antibody changes as the consequence of adsorbing on charged polymer surfaces.     

Depletion of high-abundance proteins from human plasma using a combination of an affinity and pseudo-affinity column

Human serum albumin (HSA) and immunoglobulin G (IgG) represent over 75% of all proteins present in human plasma. These high-abundance proteins prevent the detection of low-abundance proteins which are potential markers for various diseases. The depletion of HSA and IgG is therefore essential for further proteome analysis. In this paper we describe the optimization of conditions for selective depletion of HSA and IgG using affinity and pseudo-affinity chromatography. A BIA Separations CIM (convective interaction media) Protein G disk was applied for the removal of IgG and the Mimetic Blue SA A6XL stationary phase for the removal of HSA. The binding and the elution buffer for CIM Protein G disk were chosen on the basis of the peak shape. The dynamic binding capacity was determined. It was shown to be dependent on the buffer system used and independent of the flow rate and of the concentration of IgG. Beside the binding capacity for the IgG standard, the binding capacity was also determined for IgG in human plasma. The Mimetic Blue SA A6XL column was characterized using human plasma. The selectivity of the depletion was dependent on the amount of human plasma that was loaded on the column. After the conditions on both supports had been optimized, the Mimetic Blue SA A6XL stationary phase was combined with the CIM Protein G disk in order to simultaneously deplete samples of human plasma. A centrifuge spin column that enables the removal of IgG and HSA from 20 μL of human plasma was designed. The results of the depletion were examined using sodium dodecyl sulfate polyacrylamide gel electrophoresis and two-dimensional gel electrophoresis.     

Calibration curve establishment and fractionation temperature selection of polyethylene for preparative temperature rising elution fractionation

A series of copolymers of ethylene with 1-hexene synthesized using a metallocene catalyst are selected and mixed. The blend is fractionated via preparative temperature rising elution fractionation(P-TREF). All fractions are characterized via high-temperature gel permeation chromatography(GPC), 13 C nuclear magnetic resonance spectroscopy(13C-NMR), and differential scanning calorimetry(DSC). The changes in the DSC melting peak temperatures of the fractions from P-TREF as a function of elution temperature are almost linear, thereby providing a reference through which the elution temperature of TREF experiments could be selected. Moreover, the standard calibration curve(ethylene/1-hexene) of P-TREF is established, which relates to the degree of short-chain branching of the fractions. The standard calibration curve of P-TREF is beneficial to study on the complicated branching structure of polyethylene. A convenient method for selecting the fractionation temperature for TREF experiments is elaborated. The polyethylene sample is fractionated via successive self-nucleation and annealing(SSA) thermal fractionation. A multiple-melting endotherm is obtained through the final DSC heating scan for the sample after SSA thermal fractionation. A series of fractionation temperatures are then selected through the relationship between the DSC melting peak temperature and TREF elution temperature.     

Aluminium fractionation using cation exchange: comparison of results obtained after fractionation in the field and in the laboratory

Dissolved aluminium was fractionated in the field and the laboratory using a cation-exchange method. Although absolute differences between results obtained from field and laboratory fractionations were generally small, relative differences, expressed as the ratio between labile aluminium determined after laboratory fractionation (Al_ll) and that obtained after field fractionation (Al_lf) could be large. The differences found were not statistically significant, although this may simply reflect the spread in the results. Al_ll/Al_lf had no apparent relationship with the temperature difference between the field and the lab. Although some significant correlations were found between Al_ll/Al_lf and H⁺, no significant correlations were found with the equivalent relative difference in {H⁺} between the lab and the field; nor was any significant correlation found with dissolved organic carbon.     

Laser-photophoretic migration and fractionation of human blood cells

Laser photophoretic migration behavior of human blood cells in saline solution was investigated under the irradiation of Nd:YAG laser beam (532 nm) in the absence and the presence of the flow in a fused silica capillary. Red blood cells (RBC) were migrated faster than white blood cells (WBC) and blood pellets to the direction of propagation of laser light. The observed photophoretic velocity of RBC was about 11 times faster than those of others. This was understood from the larger photophoretic efficiency of RBC than that of WBC, which was simulated based on the Mie scattering theory. Furthermore, it was found that, during the photophoretic migration, RBCs spontaneously orientated parallel to the migration direction so as to reduce the drag force. Finally, it was demonstrated that RBC and WBC were separated in a micro-channel flow system by the laser photophoresis.     

Development of a capillary gel electrophoresis method for monitoring disulfide isomer heterogeneity in IgG2 antibodies

A CGE method for monitoring the disulfide isomer distribution characteristic of IgG2 MAbs is presented. Disulfide heterogeneity of MAbs has been studied using various chromatographic and electrophoretic methods. Although CGE operates using a different selectivity mechanism from that of sorption chromatographic techniques, similar trends are present in the data, which allow the CGE method to be used as a complementary method for studying disulfide isomer distribution. This article focuses on the optimization of a capillary‐based gel electrophoresis method that can be used to support antibody development including bioprocess optimization, antibody characterization, release, and formulation stability assessment.     

Chromatographic behaviour of monoclonal antibodies against wild-type amidase from Pseudomonas aeruginosa on immobilized metal chelates

The aim of this work was to devise a one‐step purification procedure for monoclonal antibodies (MAbs) of IgG class by immobilized metal affinity chromatography (IMAC). Therefore, several stationary phases were prepared containing immobilized metal chelates in order to study the chromatographic behaviour of MAbs against wild‐type amidase from Pseudomonas aeruginosa. Such MAbs adsorbed to Cu(II), Ni(II), Zn(II) and Co(II)–IDA agarose columns. The increase in ligand concentration and the use of longer spacer arms and higher pH values resulted in higher adsorption of MAbs into immobilized metal chelates. The dynamic binding capacity and the maximum binding capacity were 1.33 ± 0.015 and 3.214 ± 0.021 mg IgG/mL of sedimented commercial matrix, respectively. A K_D of 4.53 × 10⁻⁷ m was obtained from batch isotherm measurements. The combination of tailor‐made stationary phases of IMAC and the correct selection of adsorption conditions permitted a one‐step purification procedure to be devised for MAbs of IgG class. Culture supernatants containing MAbs were purified by IMAC on commercial‐Zn(II) and EPI‐30–IDA–Zn(II) Sepharose 6B columns and by affinity chromatography on Protein A‐Sepharose CL‐4B. This MAb preparation revealed on SDS–PAGE two protein bands with M_r of 50 and 22 kDa corresponding to the heavy and light chains, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Classification and evaluation of microfluidic devices for continuous suspension fractionation

Membrane processes are well-known for separating and fractionating suspensions in many industries, but suffer from particle accumulation on the membrane surface. Currently, there are new developments using microfluidic devices for cell/DNA sorting and fractionation. We anticipate these devices are also applicable to fractionation of polydisperse and concentrated suspensions (e.g. foods), and may potentially have fewer problems with particle accumulation compared to membranes. This review article presents an overview of relevant microfluidic devices. We focus on their performance with respect to concentrated suspensions, as one finds in food industry. We give quantitative estimates on their yield, selectivity, and the potential for large-scale application. From this evaluation follows that deterministic ratchets seem most promising.     

Ablative and transport fractionation of trace elements during laser sampling of glass and copper

The fractionation of trace elements due to ablation and transport processes was quantified during Q-switched infrared laser sampling of glass and copper reference materials. Filter-trapping of the ablated product at different points in the sample introduction system showed ablation and transport sometimes caused opposing fractionation effects, leading to a confounded measure of overall (ablative + transport) fractionation. An unexpected result was the greater ablative fractionation of some elements (Au, Ag, Bi, Te in glass and Au, Be, Bi, Ni, Te in copper) at a higher laser fluence of 1.35 × 10⁴W cm⁻² than at 0.62 × 10⁴W cm⁻², which contradicted predictions from modelling studies of ablation processes. With glass, there was an inverse logarithmic relationship between the extent of ablative and overall fractionation and element oxide melting point (OMPs), with elements with OMPs < 1000°C exhibiting overall concentration increases of 20–1340%. Fractionation during transport was quantitatively important for most certified elements in copper, and for the most volatile elements (Au, Ag, Bi, Te) in glass. Elements common to both matrices showed 50–100% higher ablative fractionation in copper, possibly because of greater heat conductance away from the ablation site causing increased element volatilisation or zone refinement. These differences between matrices indicate that non-matrix-matched standardisation is likely to provide inaccurate calibration of laser ablation inductively coupled plasma-mass spectrometry analyses of at least some elements.     

Cooperative multimodal retention of IgG,fragments, and aggregates on hydroxyapatite

Retention mapping of chimeric monoclonal IgG₁, Fc, Fab, F(ab′)₂, and aggregated antibody was conducted on hydroxyapatite (HA) by systematically varying phosphate and chloride concentrations during gradient elution in order to characterize the interactions of each solute with calcium and phosphate residues on the solid phase. Lysozyme was used as a control to model cation exchange‐dominant interactions. Bovine serum albumin was used as a control for calcium affinity‐dominant interactions. Calcium affinity and phosphoryl cation exchange were positively cooperative for IgG‐related species. Fc retention was dominated by calcium affinity, while retention of Fab was dominated by cation exchange. F(ab′)₂ exhibited a curve shape similar to Fab, but stronger retention. The retention curve for intact IgG incorporated the distinctive elements of its fragments but stronger retention than that predicted by their addition to one another. Aggregate retention paralleled the curve for non‐aggregated antibody, with stronger retention by both binding mechanisms. Experimental data revealed evidence of charge repulsion between IgG carboxyls and HA phosphate at low conductivity values. Electrostatic repulsion of amino residues and attraction of carboxyls by HA calcium appeared to be blocked by strong complexation of calcium with mobile phase phosphate.     

Temperature rising elution fractionation of PP/PE alloy and thermal behavior of the fractions

In this paper, a PP/PE alloy prepared by sequential polymerization of ethylene and propylene was fractionated with temperature rising elution fractionation and a variety of fractions were obtained. Thermal analysis was conducted to probe the microstructures of fractions. Four types of fraction with different melting behaviors were identified: random copolymer with no melting peak, multiple-block ethylene-propylene copolymer exhibiting plural melting peaks, ethylene-predominant copolymer with single melting peak and ethylene-propylene block copolymer with double melting peaks. The production of these components was also discussed in terms of polymerization process and the nature of active sites in the catalyst.     

Performance evaluation of two chelating ion-exchange sorbents for the fractionation of labile and inert metal species from aquatic media

The performance of two iminodiacetate chelating resins, applied in an element fractionation scheme, was investigated for the characterization of marine and stream water samples collected in potentially contaminated harbor and industrial zones. The comparison involved an evaluation of the sorption/desorption behavior of Cd, Cu, Pb and Zn on Chelex-100, a sorbent extensively employed for metal speciation studies, and on Lewatit TP-207, a material with similar chelating characteristics for which no applications for fractionation studies are reported. A characterization of the latter resin in terms of the influence of sample pH on the uptake of metals from aqueous solutions and their subsequent acid elution was carried out. Fractionation studies were performed on natural water samples and model solutions resembling their composition, spiked with micromolar concentrations of the metals. The operationally defined fractionation scheme is based on dynamic adsorption of the resin-labile fractions of metals on microcolumns made of the sorbents. This stage is followed by a batch procedure in which the eluent from the column is contacted with fresh resin to discriminate between the relatively stable species unable to react with the resin during the column interaction time, and the strongly complexed metals that do not interact with the sorbent even for periods of several hours. Results were obtained from coarsely filtered sub-samples and from specimens passed through membrane filters of pore size 0.45 and 0.22 µm. The method was also assessed with model solutions of the metals containing variable concentrations (in the 10^-3–10^-7 molar range) of complex forming agents such as nitrilotriacetic acid and trans-1,2-diaminocyclohexane-N,N,N,N-tetraacetic acid. An additional batch method, in which a fixed amount of resin was contacted with sample solution for increasing periods of time and the amount of metal remaining in solution measured as a function of the elapsed time, was used to obtain information on the kinetics of dissociation of species formed in the presence of added complexants. The behavior of both resins was similar, demonstrating that the discrimination of species derived from experiments with Chelex-100 may be properly validated by independent fractionation tests carried out with Lewatit TP-207. The behavior of the sorbents is also discussed in terms of the possible influence of particulate or colloidal materials and of kinetic effects related to the presence of complexing agents.     

Investigation of uranium-colloid interactions in soil by dual field-flow fractionation/capillary electrophoresis hyphenated with inductively coupled plasma-mass spectrometry

This paper deals with the study of uranium-colloid interactions in a carbonated soil. The work is focused on the immediately available fraction obtained after a leaching process, according to a normalized batch method. In order to characterize the different colloidal carriers, Asymmetrical Flow Field-Flow Fractionation (As-Fl-FFF) coupled to different detectors (UV, Multi Angle Laser Light Scattering (MALLS) and Inductively coupled Plasma-Mass Spectrometry (ICP-MS)) was used. The colloidal carriers are mainly inorganic particles (carbonated particles and clays) mixed with organic substances. Furthermore, dissolved and colloidal uranium species in the leaching solutions were monitored by Capillary Electrophoresis (CE) coupled to ICP-MS, in order to investigate the uranium/colloids interactions. According to the first results, uranium fate in this specific soil is controlled by sorption/desorption phenomena, strongly pH dependent.     

Sequential hydride generation/pneumatic nebulisation inductively coupled plasma mass spectrometry for the fractionation of arsenic and selenium species

The toxicity of certain elements is known to be related to their organic substituents and/or oxidation states. As such, total elemental determinations do not always yield sufficient information for accurate risk assessments and therefore speciation or fractionation data are required. In order to obtain fractionation data for trace levels of arsenic and selenium, a novel sequential pneumatic nebulisation (PN)/hydride generation (HG) inductively coupled plasma mass spectrometry (ICP-MS) method was developed. The method offers the advantage of sample introduction via either PN or HG by simply rotating a 4-way switching valve while the system is in operation. In PN mode, the liquid sample is aspirated into ICP, allowing for the determination of the total amount of each element, whilst in HG mode only the arsenic and selenium species that form volatile hydrides are determined. Conveniently, in the case of arsenic, this allows for differentiation between the four most toxic arsenic species (arsenate, arsenite, monomethylarsonic acid and dimethylarsinic acid), which form volatile hydrides, and the virtually non-toxic forms (arsenobetaine, arsenosugars, etc.), which do not. This allows for the rapid estimation of the amounts of toxic and non-toxic arsenic species present in a sample. For arsenic, the technique gave detection limits of 36 ng l⁻¹ in PN mode and 1 ng l⁻¹ in HG mode. For selenium, detection limits of 150 ng l⁻¹ were achieved in PN mode and 220 ng l⁻¹ in HG mode. The technique also gave good long- and short-term stabilities of under 6% RSD for both elements. A variety of samples, including water and urine standard reference materials, were analysed in both modes, and the precision and accuracy of the results for total arsenic and selenium levels were assessed. Using the technique in both modes also allowed for the fractionation of As and Se species into their volatile hydride-forming and non-hydride-forming species. This was particularly informative, with respect to As species present, in the case of a kelp powder extract. Digested tobacco samples were only analysed for their total As levels, in which case results obtained via both sample introduction modes showed good agreement.     

Catalytic DNA-and RNA-hydrolyzing antibodies from milk of healthy human mothers

Various catalytically active antibodies (Abs), or abzymes, have been detected recently in the sera of patients with autoimmune pathologies, in whom their presence is probably associated with autoimmunization. Normal humans are generally not considered to have abzymes, since no obvious immunizing factors are present. Here is shown by different methods that IgG from the milk of normal females possesses both DNase and RNase activities. The activities were also present in the IgG F(ab′)₂ and Fab fragments. Affinity modification of IgG by the chemically reactive derivative of an oligonucleotide led to preferential modification of the L chain of IgG. After separation of the subunits by sodium dodecyl sulfate electrophoresis in a gel containing DNA, an in-gel assay showed DNase activity in the L chain. The L chain separated by affinity chromatography on DNA-cellulose was catalytically active. These findings speak in favor of the generation of cat alytic Abs by the immune system of healthy mothers. It is known that the treatment of adults with DNases and RNases offers protection from viral and bacterial diseases. Since breast milk protects the infants from infec tions until the immune system is developed, this raises the possibility that catalytic Abs like nucleases, may possess a protective role.     

Determination of metals and metalloids in light and heavy crude oil by ICP-MS after digestion by microwave-induced combustion

A method for light and heavy crude oil digestion using microwave-induced combustion (MIC) in closed vessels is described for further determination of Ag, As, Ba, Bi, Ca, Cd, Cr, Fe, K, Mg, Li, Mn, Mo, Ni, Pb, Rb, Se, Sr, Tl, V, and Zn by inductively coupled plasma mass spectrometry (ICP-MS). Conventional microwave-assisted acid digestion (MW-AD) in pressurized vessels and analyte determination by inductively coupled plasma optical emission spectrometry (ICP OES) were also used for results comparison. For MIC procedure, samples were wrapped in polyethylene films and combusted using 20 bar of oxygen and 50 µl of 6 mol l^− 1 ammonium nitrate as aid for ignition. The concentration of nitric acid used as absorbing solution was evaluated (1, 2, 4, 7, 10 and 14 mol l^− 1) using an additional reflux step after combustion. Accuracy was evaluated for As, Ba, Ni, Se V, and Zn using certified reference material (CRM) with similar matrix composition and for Cr, Fe, K, Mg, Mn, and Mo by neutron activation analysis (NAA). Recovery tests were also performed for all the analytes by MIC and they were better than 97% using 2 mol l^− 1 nitric acid as absorbing solution (with reflux step). Agreement with certified values and NAA results was better than 95%. Using MIC it was possible to obtain lower limits of detection (LODs) by ICP-MS and also by ICP OES in comparison with those obtained by MW-AD. In spite of both sample preparation techniques were apparently suitable for crude oil digestion, MIC was preferable in view of the possibility of using diluted nitric acid as absorbing solution that is an important aspect to minimize interferences by ICP-MS and ICP OES. In order to avoid polyatomic interferences on ⁵²Cr and ⁵⁶Fe determinations by ICP-MS, a dynamic reaction cell with ammonia gas was used. Residual carbon content in digests obtained by MW-AD and MIC was 15% and < 1%, respectively. Using MIC the simultaneous digestion of 8 samples was possible in less than 30 min.     

Optimization of an IgG1 CIEF separation by using narrow-range ampholytes and DMSO as protein solubilizer

CIEF is a powerful separation tool utilized in the characterization and relative quantitation of therapeutic mAb charged isoforms. However, one CIEF method is not capable of separating all mAbs with high resolution and reproducibility. Optimization of sample composition and separation parameters is expected when developing a CIEF method for a specific mAb. This paper summarizes a root cause investigation into why a validated CIEF separation method for MAK33 (a type of IgG1) was no longer reproducible. In addition, this paper introduces the concept of sample focusing volume, which is defined as the actual capillary volume occupied by the sample after focusing and explains why there is less protein precipitation and aggregation when using narrow-range ampholytes than broad-range ampholytes. The use of DMSO as protein solubilizer and possible replacement of urea is also explored in this work. Finally, this paper demonstrates that a new optimized CIEF method can achieve over 100 reproducible high-resolution separations of MAK33 per neutral-coated capillary.     

Development and optimization of a single-step procedure using protein A affinity chromatography to isolate murine IgG1 monoclonal antibodies from hybridoma supernatants.

Protein A affinity chromatography is a standard method of purifying murine monoclonal antibodies (mabs), primarily because it can be performed easily and achieves high-purity levels. Because of its high concentration capacity, it lends itself particularly well to the isolation of mabs from the supernatants of hybridoma cultures. Unfortunately, murine immunoglobulin (Ig) G1 antibodies, a subclass which occurs frequently in the IgG mabs of mice, binds very poorly to protein A, leading to problems in this isolation procedure. For this reason an attempt was made to increase the effectiveness of protein A affinity chromatography in purifying mabs of this IgG subclass by optimizing the binding conditions. The influence of ionic strength, pH and temperature on the binding capacity of a protein A column was studied. The results show the significance of temperature in the binding of the murine IgG1 mab tested to protein A. Further investigations were carried out to optimize the elution conditions and to study the contamination of mab preparations obtained with non-specific bovine protein A reactive Igs originating from culture medium supplement (10% foetal calf serum). An optimized, automatic single-step procedure to obtain highly purified murine IgG1 mabs from hybridoma culture supernatants was developed.     

Removal of heavy metal ions from aqueous solutions by alkaline-earth metal phosphates

The possibility of utilization of calcium or magnesium phosphates of various composition for heavy and non-ferrous metal extraction from aqueous solutions has been studied. The efficiency of the phosphates in removal of Pb(II), Cr(III) and Fe(III) ions has been shown to decrease in the following sequence: Mg₃(PO₄)₂>MgNH₄PO₄>Ca₃(PO₄)₂>CaHPO₄>Ca₁₀(PO₄)₆(OH)₂ which is inverse to their hydrolytic stability series. It has been established that phosphates of non-apatite structure are capable of binding up to 12 mmol g⁻¹ of the named heavy metals by a chemical interaction. Hydroxyapatite interacts with the polyvalent metal ions via either the above mentioned or ion-exchange mechanism, depending on preparation method used for the apatite and the nature of metal.     

Enzyme immunoassays for the determination of IgG and IgM antibodies to hepatitis B core antigen using rDNA-produced core antigen and monoclonal antibodies to IgM

Conclusions We have developed highly sensitive enzyme immunoassays for total anti-HBc and anti-HBc IgM using the sequential saturation test principle resp. the anti- technique. A high practicability is achieved not only by short but also by identical incubation times in both assays which facilitates the mechanisation of the procedure.The clinical evaluation showed that the high sensitivity and specificity of the tests is a suggestive supplement in hepatitis B serology.

---

Enzymimmunoassays zur Bestimmung von IgG- und IgM-Antikörpern gegen das Hepatitis B Core-Antigen unter Verwendung von gentechnologisch hergestelltem Core-Antigen und monoklonalen Antikörpern gegen IgM