Well-defined silica supported aluminum hydride: another step towards the utopian single site dream?

Reaction of triisobutylaluminum with SBA15₇₀₀ at room temperature occurs by two parallel pathways involving either silanol or siloxane bridges. It leads to the formation of a well-defined bipodal [(SiO)₂Al–CH₂CH(CH₃)₂] 1a, silicon isobutyl [Si–CH₂CH(CH₃)₂] 1b and a silicon hydride [Si–H] 1c. Their structural identity was characterized by FT-IR and advanced solid-state NMR spectroscopies (¹H, ¹³C, ²⁹Si, ²⁷Al and 2D multiple quantum), elemental and gas phase analysis, and DFT calculations. The reaction involves the formation of a highly reactive monopodal intermediate: [SiO–Al–[CH₂CH(CH₃)₂]₂], with evolution of isobutane. This intermediate undergoes two parallel routes: transfer of either one isobutyl fragment or of one hydride to an adjacent silicon atom. Both processes occur by opening of a strained siloxane bridge, Si–O–Si but with two different mechanisms, showing that the reality of “single site” catalyst may be an utopia: DFT calculations indicate that isobutyl transfer occurs via a simple metathesis between the Al-isobutyl and O–Si bonds, while hydride transfer occurs via a two steps mechanism, the first one is a β-H elimination to Al with elimination of isobutene, whereas the second is a metathesis step between the formed Al–H bond and a O–Si bond. Thermal treatment of 1a (at 250 °C) under high vacuum (10^–5 mbar) generates Al–H through a β-H elimination of isobutyl fragment. These supported well-defined Al–H which are highly stable with time, are tetra, penta and octa coordinated as demonstrated by IR and ²⁷Al–¹H J-HMQC NMR spectroscopy. All these observations indicate that surfaces atoms around the site of grafting play a considerable role in the reactivity of a single site system.     

烯烃分子在氢终止Si(100)-2×1表面的自由基链反应

应用密度泛函理论(DFT)和从头计算分子动力学方法(ab initio MD)研究了不饱和烯烃在氢终止的Si(100)-2×1表面的自由基链反应. 计算表明, 自由基链反应中重要的一步是烷烃链自由基的氢抽提过程, 硅表面上邻近位置(the nearest neighbor, NN)的氢抽提比次邻近位置(the next-nearest neighbor, NNN)的氢抽提有一稍低的能垒. 从头算分子动力学显示, 过渡态的烷烃自由基与氢终止Si(100)-2×1表面上的氢原子能够很容易形成C—H键, 完成一个氢抽提过程, 同时在硅表面产生下一个孤电子, 继续引发链反应.     

Sol-Gel Synthesis and Pyrolysis Study of Oxyfluoride Silica Gels

Silicon oxyfluoride materials are synthesized by the sol-gel method using triethoxyfluorosilane as precursor, bearing the Si—F bond. SiO_(2–0.5x) F _x gel preparation requires peculiar experimental control of hydrolysis and condensation reactions. Maintenance of the Si—F bond during gelling, heating and aging was studied in the case of processes carried out under an argon atmosphere or in air. Fluorine contents in resulting samples were quantified by FT-IR and X-ray photoelectron spectroscopy (XPS); specific surface area and porosity of powdered samples were determined by N₂ adsorption. The thermal stability of oxyfluoride gels was studied by thermogravimetric-mass spectrometric (TG-MS) coupled analyses during heat treatment, under He flow. Mass spectra recorded during principal weight losses indicate the release of variously fluorinated silicon species resulting from Si—F/Si—O exchange reactions. The evolution of these species was observed at different temperatures, depending on gelling conditions. In particular, degradation of Si—F moieties was prominent for gels aged in air, whereas samples processed under an argon atmosphere preserve the Si—F bond up to 300°C.     

Spontaneous S–Si bonding of alkanethiols to Si(111)–H: towards Si–molecule–Si circuits

We report the synthesis of covalently linked self-assembled monolayers (SAMs) on silicon surfaces, using mild conditions, in a way that is compatible with silicon-electronics fabrication technologies. In molecular electronics, SAMs of functional molecules tethered to gold via sulfur linkages dominate, but these devices are not robust in design and not amenable to scalable manufacture. Whereas covalent bonding to silicon has long been recognized as an attractive alternative, only formation processes involving high temperature and/or pressure, strong chemicals, or irradiation are known. To make molecular devices on silicon under mild conditions with properties reminiscent of Au–S ones, we exploit the susceptibility of thiols to oxidation by dissolved O₂, initiating free-radical polymerization mechanisms without causing oxidative damage to the surface. Without thiols present, dissolved O₂ would normally oxidize the silicon and hence reaction conditions such as these have been strenuously avoided in the past. The surface coverage on Si(111)–H is measured to be very high, 75% of a full monolayer, with density-functional theory calculations used to profile spontaneous reaction mechanisms. The impact of the Si–S chemistry in single-molecule electronics is demonstrated using STM-junction approaches by forming Si–hexanedithiol–Si junctions. Si–S contacts result in single-molecule wires that are mechanically stable, with an average lifetime at room temperature of 2.7 s, which is five folds higher than that reported for conventional molecular junctions formed between gold electrodes. The enhanced “ON” lifetime of this single-molecule circuit enables previously inaccessible electrical measurements on single molecules.

Spontaneously formed Si–S bonds enable monolayer and single-molecule Si–molecule–Si circuits.     

Exohedral functionalization vs. core expansion of siliconoids with Group 9 metals: catalytic activity in alkene isomerization

Taking advantage of pendant tetrylene side-arms, stable unsaturated Si₆ silicon clusters (siliconoids) with the benzpolarene motif (the energetic counterpart of benzene in silicon chemistry) are successfully employed as ligands towards Group 9 metals. The pronounced σ-donating properties of the tetrylene moieties allow for sequential oxidative addition and reductive elimination events without complete dissociation of the ligand at any stage. In this manner, either covalently linked or core-expanded metallasiliconoids are obtained. [Rh(CO)₂Cl]₂ inserts into an endohedral Si–Si bond of the silylene-functionalized hexasilabenzpolarene leading to an unprecedented coordination sphere of the Rh centre with five silicon atoms in the initial product, which is subsequentially converted to a simpler derivative under reconstruction of the Si₆ benzpolarene motif. In the case of [Ir(cod)Cl]₂ (cod = 1,5-cyclooctadiene) a similar Si–Si insertion leads to the contraction of the Si₆ cluster core with concomitant transfer of a chlorine atom to a silicon vertex generating an exohedral chlorosilyl group. Metallasiliconoids are employed in the isomerization of terminal alkenes to 2-alkenes as a catalytic benchmark reaction, which proceeds with competitive selectivities and reaction rates in the case of iridium complexes.

Unprecedented metallasiliconoids are accessible from a silylene-substituted Si₆ siliconoid and Group 9 metal fragments. The isomerization of terminal alkenes to 2-alkenes is competitively catalyzed by these species ( = silicon).     

Synthesis of hydrosilylboronates via the monoborylation of a dihydrosilane Si–H bond and their application for the generation of dialkylhydrosilyl anions

The synthesis of a series of hydrosilylboronates via the selective iridium- or nickel-catalyzed monoborylation of dihydrosilane Si–H bonds is described. The synthesized silylboronates, which bear a single Si–H bond, can be used as novel silicon nucleophiles in the presence of transition-metal catalysts or bases. The first ²⁹Si{¹H} NMR spectroscopic evidence for the formation of (t-Bu)₂HSiLi, generated by the reaction of (t-Bu)₂HSi–B(pin) with MeLi, is reported as the first example of a dialkylhydorosilyl lithium species.

Monoborylation of a dihydrosilane Si–H bond can be achieved in the presence of iridium- or nickel-based catalysts, yielding novel hydrosilylboronates that bear a hydrogen atom at the silicon center.     

Hydridosilazanes hydrolysis-condensation reactions studied by <Superscript>1</Superscript>H and <Superscript>29</Superscript>Si liquid NMR spectroscopy

Hydridosilazane compounds containing Si–N and Si–H bonds can be used as precursors of SiO_x materials. The hydrolysis-condensation reactions of tetramethyldisilazane, as a polyhydridosilazane model compound, were investigated by ¹H and ²⁹Si liquid NMR spectroscopy. These reactions were carried out at room temperature for up to 120 min in presence of water. The identified products are short linear siloxane species (hydride terminated polydimethylsiloxanes M^HD_xM^H) and cyclosiloxanes. Silicon hydride persistence in the reactional mixture suggested that silazane group is more sensitive to hydrolysis reaction than silicon hydride group. Moreover, additional experiments evidenced that the low steric hindrance of the silicon hydride influences the silazane hydrolysis kinetic. Hence the presence of ammonia released during silazane hydrolysis reaction was demonstrated to be a catalyst of the silicon hydride hydrolysis reaction.     

Scandium Phosphonioketene: Synthesis,Bonding and Reactivity

Reaction of a scandium phosphoniomethylidene with carbon monoxide provides the first scandium phosphonioketene ( 1 ). X-ray diffraction analysis shows that the complex has a very short Sc−C bond (2.138(2) Å), and DFT calculations indicate that this unusual short bond length is due to the significant contribution of ionic coulomb interaction between carbon and scandium and the η²-O,C coordination fashion. Complex 1 is thermally stable, albeit shows high reactivity towards a series of unsaturated substrates, including carbon dioxide, ketone, imine, nitrile and isocyanide. In the reaction with tert-butyl isocyanide, not only an insertion of tert-butyl isocyanide into the Sc−C bond occur, but also a C−H activation on the phenyl ring. DFT calculations show that the reactivity of 1 operated by nucleophilic properties, and therefore the reaction mechanism favors the nucleophilic attack to isocyanide as a rate-determining step, followed by the stepwise C−H activation through an interesting C−H deprotonation.     

Synthesis and characterization of a chlorofunctionalized unsaturated carbosilane oligomer

Acyclic diene metathesis (ADMET) polymerization offers a viable route for the synthesis of chlorofunctionalized unsaturated carbosilane oligomers. The Si Cl bond in unsaturated carbosilane monomers remains inert during metathesis and the use of a highly reactive molybdenum-based, Lewis acid-free alkylidene catalyst affords unsaturated chlorofunctionalized carbosilane oligomers with known vinyl end groups. The first synthesis of an unsaturated carbosilane oligomer functionalized with a Si Cl bond was performed. A chlorofunctionalized silacyclopentene product was also observed, due to a backbiting reaction. This new class of functionalized oligomers has a low glass transition temperature and sites of unsaturation which may be used for further reaction. ADMET chemistry now provides access to a variety of chlorofunctionalized unsaturated carbosilanes which can be used to tailor make hydrolytically stable carbosilane oligomers and polymers via nucleophilic grafting reactions.     

Chemical and electrical passivation of silicon (111) surfaces through functionalization with sterically hindered alkyl groups

Crystalline Si(111) surfaces have been alkylated in a two-step chlorination/alkylation process using sterically bulky alkyl groups such as (CH3)2CH- (iso-propyl), (CH3)3C- (tert-butyl), and C6H5- (phenyl) moieties. X-ray photoelectron spectroscopic (XPS) data in the C 1s region of such surfaces exhibited a low energy emission at 283.9 binding eV, consistent with carbon bonded to Si. The C 1s XPS data indicated that the alkyls were present at lower coverages than methyl groups on CH(3)-terminated Si(111) surfaces. Despite the lower alkyl group coverage, no Cl was detected after alkylation. Functionalization with the bulky alkyl groups effectively inhibited the oxidation of Si(111) surfaces in air and produced low (<100 cm s(-1)) surface recombination velocities. Transmission infrared spectroscopy indicated that the surfaces were partially H-terminated after the functionalization reaction. Application of a reducing potential, -2.5 V vs Ag+/Ag, to Cl-terminated Si(111) electrodes in tetrahydrofuran resulted in the complete elimination of Cl, as measured by XPS. The data are consistent with a mechanism in which the reaction of alkyl Grignard reagents with the Cl-terminated Si(111) surfaces involves electron transfer from the Grignard reagent to the Si, loss of chloride to solution, and subsequent reaction between the resultant silicon radical and alkyl radical to form a silicon-carbon bond. Sites sterically hindered by neighboring alkyl groups abstract a H atom to produce Si-H bonds on the surface.     

Illuminating the Mechanism of the Borane‐Catalyzed Hydrosilylation of Imines with Both an Axially Chiral Borane and Silane

The reduction of C?O groups with silanes catalyzed by electron‐deficient boranes follows a counterintuitive mechanism in which the Si? H bond is activated by the boron Lewis acid prior to nucleophilic attack of the carbonyl oxygen atom at the silicon atom. The borohydride thus formed is the actual reductant. These steps were elucidated by using a silicon‐stereogenic silane, but applying the same technique to the related reduction of C?N groups was inconclusive due to racemization of the silicon atom. The present investigation now proves by the deliberate combination of our axially chiral borane catalyst and axially chiral silane reagents (in both enantiomeric forms) that the mechanisms of these hydrosilylations are essentially identical. Unmistakable stereochemical outcomes for the borane/silane pairs show that both participate in the enantioselectivity‐determining hydride‐transfer step. These experiments became possible after the discovery that our axially chiral C₆F₅‐substituted borane induces appreciable levels of enantioinduction in the imine hydrosilylation.     

The gas-phase molecular structure of 1,1-diethynylsilacyclobutane as determined by means of electron diffraction and ab initio calculations

As a continuation of our systematic investigation of the effect of substituents on the ring geometry and dynamics in silacyclobutanes and in order to explore the role of the silicon atom as a mediator for electronic interactions between the attached fragments, we studied the molecular structure of 1,1-diethynylsilacyclobutane (DESCB) by means of gas-phase electron diffraction and ab initio calculations. The structural refinement of the electron diffraction data yielded the following bond lengths (r_a) and bond angles (uncertainties are 3σ): r(Si–C)=1.874(2) Å, r(Si–C)=1.817(1) Å, (C–Si–C)=79.2(6)°, (C–Si–C)=106.5(6)°. The geminal Si–CC moieties were found to be bent outwards by 3.1(15)° and the puckering angle was determined to be 30.0(15)°. The evidently short Si–C bond length, which was also reproduced by the ab initio calculations, could be rationalized as being the consequence of the electronic interaction between the outer π charges of the triple bond and the 3pπ orbitals at the silicon atom. It is also likely that the conjugation of the geminal ethynyl groups leads to an enhancement of this bond contraction. Electrostatic interactions and the subsequent reduction of the covalent radius of the silicon atom may also contribute to this bond shortening. It has been found that the endocyclic Si–C bond length fits nicely within a scheme describing a monotonous decrease of the Si–C bond length with the increase of the electronegativity of the substituent in various geminally substituted silacyclobutanes.A series of related silacyclobutanes and acyclic diethynylsilanes have been studied by applying various ab initio methods and their optimized structures were compared to the structure of DESCB. Among these compounds are 1,1-dicyanosilacyclobutane (DCYSCB), which is isoelectronic to DESCB, 1,1-diethynylcyclobutane (DECB) which is isovalent to DESCB, monoethynylsilacyclobutane (MESCB) and monocyanosilacyclobutane (MCYSCB). Searching for reasonable support for the explanation of the structural results of DESCB we performed detailed natural population analysis as well as Mulliken population analysis (MPA) on DESCB and other related molecules. In contrast to the Mulliken charges, the natural atomic charges provided helpful information concerning the bonding properties in DESCB and the corresponding compounds. By varying the size of some basis sets, we could demonstrate the validity of the repeatedly discussed dependency of the Mulliken MPA on the basis set.For the performance of the quantum mechanical calculations we employed the following methods and basis sets: HF/6-31G(d,p), DFT/B3PW91/6-31G(d), DFT/B3PW91/6-311++G(d,p), MP2/6-31G(d,p) and MP2/6-311++G(d,p).     

Chemical end-grafting of homogeneous polystyrene monolayers on mica and silica surfaces

Homogeneous polystyrene monolayers covalently end-attached on mica and silica surfaces were obtained using a "graft to" methodology. The grafting was achieved via nucleophilic substitution between silanol groups (Si-OH) containing surface and monochlorosilyl terminated polystyrene (PS). Different parameters, such as surface activation, grafting reaction time, polymer concentration, nature of solvent, and presence of catalyst, were investigated to determine the optimal conditions for creating very homogeneous and stable polymer monolayers. Ellipsometry, atomic force microscopy (AFM), surface forces apparatus (SFA), and contact angle measurements were used to characterize the polymer-grafted layers. An efficient plasma activation procedure was established to create a maximum number of silanol groups on mica surfaces without increasing the surface roughness. Surface reactivity was investigated by grafting trimethylchlorosilane (TMS) on OH-activated mica and silica. The maximum TMS surface coverage on activated mica is similar to that observed for silica. The stability of covalently attached TMS and PS layers in toluene and water were investigated. Both grafted layers (TMS and PS) partially detached from the mica and silica surfaces when immersed in water. Hydrolysis of the siloxane bond between the monochlorosilyl groups and the surface is the most probable cause of layer degrafting. The degrafting was much slower with the long PS polymer chains, compared to the small TMS molecules, which may act as a protective layer against hydrolysis.     

Hydrolysis and grafting of dimethylalkoxysilanes onto stainless steel

The grafting of trialkoxysilane molecules should also give rise to the formation of a siloxane network at the substrate's surface when trialkoxysilanes are used. Other candidates that might be able to act as adhesion promoters at metallic surfaces are dimethylalkoxysilanes. The advantage of dimethylalkoxysilanes is that only one silanol group is produced during the hydrolysis step, leading to the formation of a grafted monolayer onto the steel. Moreover, the chemical grafting of stainless steel, which exhibits a low surface reactivity, is of great interest for industrial applications such as adhesive bonding or coatings. The objective of this work was to chemically graft dimethylalkoxysilanes onto AISI 316L stainless steel and to analyze the grafted layer by X‐ray photoelectron spectroscopy (XPS). Investigation of the hydrolysis of these molecules in aqueous solutions was also performed by proton nuclear magnetic resonance spectroscopy (¹H NMR). The grafting of 3‐(ethoxydimethylsilyl)propylamine (APDES) and 3‐glycidoxypropyldimethylethoxysilane (GPDES) was achieved onto stainless steel after a controlled hydrolysis reaction. A pH inferior or equal to 5 was necessary to obtain a sufficient hydrolysis of silanes. XPS results have evidenced the grafting of the silanes onto stainless steel. The signal of the Si 2p peak clearly showed the formation of a covalent bond between APDES and the stainless steel surface through the O atoms giving rise to a uniform layer of adsorbed molecules. Moreover, this grafted layer is strongly stable as no removal of the alkoxysilane was observed after immersion in hot water which is very critical for these molecules. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly stable organic monolayers for reacting silicon with further functionalities: the effect of the C-C bond nearest the silicon surface

Crystalline Si(111) surfaces have been alkylated in a two-step chlorination/alkylation process using various organic molecules having similar backbones but differing in their C-C bond closest to the silicon surface (i.e., C-C vs C=C vs C[triple bond]C bonds). X-ray photoelectron spectroscopic (XPS) data show that functionalization of silicon surfaces with propenyl magnesium bromide (CH3-CH=CH-MgBr) organic molecules gives nearly full coverage of the silicon atop sites, as on methyl- and propynyl-terminated silicon surfaces. Propenyl-terminated silicon surface shows less surface oxidation and is more robust against solvent attacks when compared to methyl- and propynyl-terminated silicon surfaces. We also show a secondary functionalization process of propenyl-terminated silicon surface with 4'-[3-Trifluoromethyl-3H-diazirin-3-yl]-benzoic acid N-hydroxysuccinimide ester [TDBA-OSu] cross-linker. The Si-CH=CH-CH3 surfaces thus offer a means of attaching a variety of chemical moieties to a silicon surface through a short linking group, enabling applications in molecular electronics, energy conversion, catalysis, and sensing.     

硅(111)衬底上直接接枝巯基的方法

硅衬底是很有应用前景的表面。这是因为硅衬底在机械上和化学上的适应性能够抵御水环境和有机环境带来的影响。除此之外,优良的电学性质也是它们成为具有应用前景的表面的原因。目前有许多方法来进行硅表面的巯基化,很多情况下是将具有―SH末端的分子接枝到硅衬底上。但这些方法存在反应时间长的问题。在这篇报导中,我们发展了一种新的硅表面巯基化方法。这种方法可以实现将巯基直接接枝到硅片表面。新方法需要对硅衬底进行氯化和巯基化反应,所需的反应时间缩短。X射线光电子能谱（XPS）和接触角测量被用于研究反应中每个步骤的表面表征。     

Dry synthesis of triple cumulative double bonds (C=C=C=N) on Si(111)-7 x 7 surfaces

The interactions of cyanoacetylene and diacetylene with a Si(111)-7 x 7 surface have been studied as model systems to mechanistically understand the chemical binding of unsaturated organic molecules to diradical-like silicon dangling bonds. Vibrational studies show that cyanoacetylene mainly binds to the surface through a diradical reaction involving both cyano and C[triple bond]C groups with an adjacent adatom-rest atom pair at 110 K, resulting in an intermediate containing triple cumulative double bonds (C=C=C=N). On the other hand, diacetylene was shown to the covalently attached to Si(111)-7 x 7 only through one of its C[triple bond]C groups, forming an enynic-like structure with a C=C-C[triple bond]C skeleton. These chemisorbed species containing triple cumulative double bonds (C=C=C=N) and C=C-C[triple bond]C may be employed as precursors (or templates) for further construction of bilayer organic films on the semiconductor surfaces.     

Formation of tetra(ethylene oxide) terminated Si-C linked monolayers and their derivatization with glycine: an example of a generic strategy for the immobilization of biomolecules on silicon

Surface modification with oligo(ethylene oxide) functionalized monolayers terminated with reactive headgroups constitutes a powerful strategy to provide specific coupling of biomolecules with simultaneous protection from nonspecific adsorption on surfaces for the preparation of biorecognition interfaces. To date, oligo(ethylene oxide) functionalized monolayer-forming molecules which can be activated for attachment of biomolecules but which can selectively form monolayers onto hydrogen terminated silicon have yet to be developed. Here, self-assembled monolayers (SAMs) containing tetra(ethylene oxide) moieties protected with tert-butyl dimethylsilyl groups were formed by thermal hydrosilylation of alkenes with single-crystal Si(111)-H. The protection group was used to avoid side reactions with the hydride terminated silicon surface. Monolayer formation was carried out using solutions of the alkene in the high-boiling-point solvent 1,3,5-triethylbenzene. The protecting group was removed under very mild acidic conditions to yield a free hydroxyl functionality, a convenient surface moiety for coupling of biological entities via carbamate bond formation. The chemical composition and structure of the monolayers before and after deprotection were characterized by X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry. To demonstrate the utility of this surface for covalent modification, two reagents were compared and contrasted for their ability to activate the surface hydroxyl groups for coupling of free amines, carbonyl diimidazole (CDI), and disuccinimidyl carbonate (DSC). Analysis of XP spectra before and after activation by CDI or DSC, and after subsequent reaction with glycine, provided quantitative information on the extent of activation and overall coupling efficiencies. CDI activated surfaces gave poor coupling yields under various conditions, whereas DSC mediated activation followed by aminolysis at neutral pH was found to be an efficient method for the immobilization of amines on tetra(ethylene oxide) modified surfaces.     

Dispersing carbon nanotubes in aqueous solutions by a silicon surfactant: Experimental and molecular dynamics simulation study

The dispersion effect of carbon nanotubes (CNTs) in aqueous solutions by a silicon surfactant (ethoxy modified trisiloxane, named Ag-64) was investigated in detail using experimental method and molecular dynamics simulation. The Si–O–Si chain of silicon surfactant was flexible due to long Si–C bond and it could easily wrap onto the surface of CNTs through hydrophobic and other intermolecular interactions. The hydrophilic part of PEO provided the CNTs dispersed in the aqueous solution and prevented CNTs from aggregating in water through steric stabilization. It was found that Ag-64 could disperse CNTs with different diameters and it was an effective dispersing agent. The results of molecular dynamics simulation indicated that Ag-64 molecules could wrap onto the surface of CNTs leading to steric stabilization so that it could well disperse CNTs, and Van der Waals attraction was the dominating force of Ag-64 adsorbing onto CNTs. Our study may provide experimental and theoretical basis for using silicon surfactants to disperse CNTs, which can open the avenue of new applications for silicon surfactants.     

Covalent Grafting of BPin functions on Carbon Nanotubes and Chan–Lam–Evans Post-Functionalization

The chemical functionalization of carbon nanotubes is often a prerequisite prior to their use in various applications. The covalent grafting of 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (BPin) functional groups directly on the surface of multi- and single-walled carbon nanotubes, activated by nucleophilic addition of nBuLi, was carried out. Thermogravimetric analysis (TGA) coupled with mass spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ions mass spectrometry (ToF-SIMS) confirmed the efficiency of this methodology and proved the integrity and covalent grafting of the BPin functional groups. These groups were further reacted with various nucleophiles in the presence of a copper(II) source in the conditions of the aerobic Chan–Lam–Evans coupling. The resulting materials were characterized by TGA, XPS and ToF-SIMS. This route is efficient, reliable and among the scarce reactions that enable the direct grafting of heteroatoms at carbonaceous material surfaces.