Two kinds of nanoscale dynamic heterogeneity in single‐phase polymer blends and their common origin

Differential scanning calorimetry (DSC) and laser‐interferometric creep rate spectroscopy (CRS) were used for kinetic and discrete analysis of segmental motion within (and close to) glass transition range in polystyrene ‐ poly(α‐methyl styrene) (PS/PMS) and polystyrene ‐ poly(vinyl methyl ether) (PS/PVME) miscible blends. Two kinds of segmental dynamics heterogeneity were found. Separate ‘unfreezing’ of PS and PMS segmental motions was observed that manifested itself in two T_gs and simultaneous large drop in the Tg s, as well as glass transition activation energy, motional event scale and cooperativity degree values, down to the β‐relaxation parameters. The wide activation energy dispersion within a single broad glass transition in PS/PVME blends was found, and this relaxation region was subdivided, by CRS, into several predicted kinds of segmental motion. Both results are treated in the framework of the concept of common segmental nature of α‐ and β‐relaxations in flexible chain polymers.     

Fourier-transform infrared study of polystyrene/poly(vinyl methyl ether) blends

Fourier-transform infrared (FTIR) studies of polystyrene (PS)/poly(vinyl methyl ether) (PVME) blends are presented. Both compatible (one-phase) and phase-separated blends were studied. In the case of compatible PS/PVME blends, there is strong evidence for molecular interactions. The interaction spectrum was obtained by digital subtraction techniques. In contrast, no interaction is detected for the phase-separated blends. In view of these results, molecular interactions must play a role in the compatibility of the two polymers. The merits of factor analysis and least-squares fit methods, as pertaining to our data, are also discussed.     

苯乙烯-丁二烯-苯乙烯/聚乙烯基甲基醚共混体系相容性的FT-IR及DSC研究

嵌段高聚物、均聚物共混体系相容性是近年来研究的热点。本工作以光学显微镜、DSC、FT-IR为手段,研究了三嵌段高聚物苯乙烯-丁二烯-苯乙烯(SBS);SBS-48、SBS-30,SBS-28与聚乙烯基甲基醚共混体系的相容性。DSC结果表明,随SBS中PS含量的升高,体系相容性变好,PS段分子量增大,也有助于体系相容。FT-IR结果表明PVME中COCH_3在1100cm~(-1)附近呈现的双峰的相对强度对体系的相容性十分敏感,而由于苯环C—H振动产生的698cm~(-1)峰位却不象PS/PVME体系那样随相容性的改变而有显著的改变。总而言之,嵌段高聚物SBS/均聚物PVME共混体系中,体系的相容性依赖于嵌段高聚物在体系中的组份含量及嵌段高聚物中PS的重量百分含量,PS段分子量的大小对体系相容性也有影响。     

Adam-Gibbs based model to describe the single component dynamics in miscible polymer blends under hydrostatic pressure

We present in this work a new model to describe the component segmental dynamics in miscible polymers blends as a function of pressure, temperature, and composition. The model is based on a combination of the Adam-Gibbs (AG) theory and the concept of the chain connectivity. In this paper we have extended our previous approach [D. Cangialosi et al. J. Chem. Phys. 123, 144908 (2005)] to include the effects of pressure in the component dynamics of miscible polymer blends. The resulting model has been tested on poly(vinyl methyl ether) (PVME)/polystyrene (PS) blends at different concentrations and in the temperature range where the system is in equilibrium. The results show an excellent agreement between the experimental and calculated relaxation times using only one fitting parameter. Once this parameter is known the model allows calculating the size of the relevant length scale where the segmental relaxation of the dielectrically active component takes place, i.e., the so called cooperative rearrangement region (CRR) in the AG framework. Thus the size of the CRR for PVME in the blends with PS has been determined as well as its dependence with pressure, temperature, and concentration.     

Modeling of thermodynamic behavior of PVT properties and cloud point temperatures of polymer blends and polymer blend + carbon dioxide systems using non-cubic equations of state

In recent years, many factors influencing phase behavior of polymer blends have been studied because of their widely technological importance, as a simple method of formulating new materials with tailored properties which make them suitable for a variety of applications. This work has three main goals which were reached by using the Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT) and the Sanchez–Lacombe (SL) non-cubic equations of state (EoS), which in previous works have shown their ability to handle long chain and associating interactions. First, both equations of state were tested with the correlation of the specific volumes of pure blends (PBD/PS, PPO/PS, PVME/PS, PEO/PES) and the prediction of the specific volumes for blends; second, the modeling of blend miscibilities in the liquid–liquid equilibria (LLE) of PBD/PS, PPG/PEGE, PVME/PS, PEO/PES, and PnPMA/PS blends; third, the modeling of the phase behavior of PS/PVME blends at various compositions in the presence of CO₂. PC-SAFT and SL pure-component parameters were regressed by fitting pure-component data of real substances (liquid pressure–volume–temperature, PVT, data for polymers and vapor pressure and saturated liquid molar volume for CO₂) and the fluid phase behavior of blend systems were simulated fitting one binary interaction parameter (k_ij) by regression of experimental data using the modified likelihood maximum method. Results were compared with experimental data obtained from literature and an excellent agreement was obtained with both EoS, which were also capable of predicting the fluid phase behavior corresponding to the critical solution temperatures (LCST: lower critical solution temperature, UCST: upper critical solution temperature) of blends.     

Immiscibility,upper critical solution temperature,and miscibility in blends of poly(vinyl ether)s with polyacrylics: Effects of pendant groups

Various phase behavior of blends of poly(vinyl ether)s with homologous acrylic polymers (polymethacrylates or polyacrylates) were examined using differential scanning calorimetry, optical microscopy (OM), and Fourier‐transformed infrared spectroscopy. Effects of varying the pendant groups of either of constituent polymers on the phase behavior of the blends were analyzed. A series of interestingly different phase behavior in the blends has been revealed in that as the pendant group in the acrylic polymer series gets longer, polymethacrylate/poly(vinyl methyl ether) (PVME) blends exhibit immiscibility, upper critical solution temperature (UCST), and miscibility, respectively. This study found that the true phase behavior of poly(propyl methacrylate)/PVME [and poly(isopropyl methacrylate)/PVME)] blend systems, though immiscible at ambient, actually displayed a rare UCST upon heating to higher temperatures. Similarly, as the methyl pendant group in PVE is lengthened to ethyl (i.e., PVME replaced by PVEE), phase behavior of its blends with series of polymethacrylates or polyacrylates changes correspondingly. Analyses and quantitative comparisons on four series of blends of PVE/acrylic polymer were performed to thoroughly understand the effects of pendant groups in either polyethers (PVE's) or acrylic polymers on the phase behavior of the blends of these two constituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1521–1534, 2007     

Photooxidation of blends of polystyrene and poly (vinyl methyl ether)

Photooxidation of blends of polystyrene and poly (vinyl methyl ether) was studied at 30°C. The oxygen uptake by PS was negligible but PVME oxidized readily. The induction period of oxidation of PVME was prolonged by the presence of PS. The steady state rate of oxidation of the blend was strongly influenced by the segmental mobility of the blend which also governed the kinetics and morphology of phase separation. The molecular weight of PVME decreased more slowly in the blend as PS content increased. It was believed that the reaction between PVME radicals and PS resulted in less reactive PS radicals which retarded oxidation. The PS radicals eventually underwent chain scission reactions.     

A dielectric study of secondary relaxations and the “memory effect” in two compatible polystyrene blends

Dielectric permittivities and loss tangents of 10 and 30% poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)–polystyrene (PS) blends and 10 and 25% poly(vinyl methyl ether) (PVME)–polystyrene blends have been measured from 80 to 360 K at 1 and 10 kHz. The PPO-PS blends have two secondary relaxations below T_g and the PVME-PS blends have three regions. All blends have a β process which appears near 290 K, is independent of PPO or PVME concentration, and is associated with the local modes of motions of PS chains. It is suggested that the β process of PS allows a dipolar reorientation of the PPO or PS chain segments by creating more favorable surroundings for the motions of the latter. The effect of physical aging in the PPO-PS blend is substantial but the “memory effect” is significantly less. This is due to the lower contribution to tanδ from the β process of the blend.     

Phase separation in polystyrene/poly (vinyl methyl ether) blend revealed by two-dimensional correlation resonance light scattering spectroscopy

Two-dimensional (2D) correlation resonance light scattering (RLS) spectroscopy has been successfully applied to investigate phase separation of polystyrene (PS)/poly (vinyl methyl ether) (PVME) film by using a conventional spectrofluorimeter. 2D synchronous correlation RLS spectrum indicates that the RLS peak intensity drastically increases with a rise in temperature due to aggregation of chromophores (i.e. phenyl rings) in PS particles in the course of phase separation. In addition, as concluded by 2D asynchronous correlation RLS spectrum, RLS has higher sensitivity than conventional light scattering. For RLS, the closer to the absorption band, the more sensitive it is to the aggregation during phase separation. By means of moving-window two-dimensional (MW2D) correlation spectrum based on autocorrelation calculations, the cloud point (370 K) was determined, which is in good agreement with the literature. On the other hand, time evolution of RLS intensity at various temperatures distinctly shows that phase separation of PS/PVME film involves two mechanisms, i.e. spinodal decomposition (SD) and nucleation and growth (NG). Accordingly, 2D correlation RLS proves to be a very simple and sensitive method to monitor phase separation in polymer blends and might supplement the existing characterization tools.     

Phase behavior in mixtures of a homopolymer and a block copolymer 1. FTIR and DSC studies

Miscibility in blends of three styrene-butadiene-styrene and one styrene-isoprene-styrene triblock copolymers containing 28%, 30%, 48%, and 14% by weight of polystyrene, respectively, with poly(vinyl methyl ether) (PVME) were investigated by FTIR spectroscopy and differential scanning calorimetry (DSC). It was found from the optical clarity and the glass transition temperature behavior that the blends show miscibility for each kind of triblock copolymers below a certain concentration of PVME. The concentration range to show miscibility becomes wider as the polystyrene content and molecular weight of PS segment in the triblock copolymers increase. From the FTIR results, the relative peak intensity of the 1100 cm^-1 region due to COCH₃ band of PVME and peak position of 698 cm^-1 region due to phenyl ring are sensitive to the miscibility of SBS(SIS)/PVME blends. The results show that the miscibility in SBS(SIS)/PVME blends is greatly affected by the composition of the copolymers and the polystyrene content in the triblock copolymers. Molecular weights of polystyrene segments have also affected the miscibility of the blends. ©1995 John Wiley & Sons, Inc.     

聚己内酯在聚己内酯/聚乙烯基甲基醚共混体系中的结晶研究

通过示差扫描量热(DSC)、广角X射线衍射(WAXD)、小角X射线散射(SAXS)研究了聚己内酯(PCL)/聚乙烯基甲基醚(PVME)共混体系中PCL的结晶行为.研究结果表明,共混聚合物中PCL的结晶度几乎不随体系的组成而发生变化.共混物中PVME的存在没有改变PCL的晶体结构,但是随着PVME含量的增加,片晶之间的距离则大,这主要是由于非晶层增厚引起的.     

Effect of blend composition on diffusivity and solubility of small molecules in polystyrene/poly(vinyl methyl ether) blends

The capillary column inverse gas chromatography technique was used to determine diffusivity and solubility data for several solvents in polymer blends composed of polystyrene and poly(vinyl methyl ether) (PVME). Diffusivity behaved as expected, increasing as the concentration of PVME increased in the blend. Knowing only the free‐volume parameters for the pure polymers, the free‐volume theory was successfully applied to predict the dependence of the diffusion coefficients on the blend composition. Transport in blends above the glass transition temperature is controlled by free volume, and the effect of concentration fluctuations is minimal at the temperatures studied. Experimental data show an increase in the partition coefficient of some solvents in the blends with respect to the pure polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2071–2082, 2007     

The effect of phase‐separated morphology on the rheological properties of polystyrene/poly(vinyl methyl ether) blend

The effect of phase‐separated morphology on the rheological properties of polystyrene/poly(vinyl methyl ether) (PS/PVME) blend was investigated by optical microscopy (OM), light scattering (LS) method, and rheology. The blend had a lower critical solution temperature (LCST) of 112°C obtained by turbidity experiment using LS at a heating rate of 1°C/h. Three different blend compositions (critical 30/70 PS/PVME by weight) and two off‐critical (50/50 and 10/90)) were prepared. The rheological properties of each composition were monitored with phase‐separation time after a temperature jump from a homogeneous state to the preset phase‐separation temperature. For the 30/70 and 50/50 blends, it was found that with phase‐separation time, the storage and loss moduli (G′ and G″) increased at shorter times due to the formation of co‐continuous structures resulting from spinodal decomposition. Under small oscillatory shearing, shear moduli gradually decreased with time at longer phase‐separation times due to the alignment of co‐continuous structures toward the flow direction, as verified by scanning electron microscopy. However, for the 10/90 PS/PVME blend, the rheological properties did not change with phase‐separation times. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 889–906, 1999     

High-temperature fourier transform infrared study of polystyrene/poly(vinyl methyl ether) blends

Fourier transform infrared (FTIR) studies of polystyrene (PS)/poly(vinyl methyl ether) (PVME) miscible blends as a function of temperature are presented. Below the lower critical solution temperature (LCST) little change is observed in the interaction spectrum obtained via digital subtraction techniques. Once above the LCST, the magnitude of the interaction spectrum decreases as a result of the phase separation process. Comparison of the behavior of the ether C? O stretching band in the reference PVME and in the blends has yielded a lower limit estimate for the interaction energy of about 0.15 kcal/mol.     

Tracer diffusion of star-branched polystyrenes in poly(vinyl methyl ether) gels

The tracer diffusion of 3-, 4-, and 12-arm polystyrene (PS) stars in poly(vinyl methyl ether) (PVME) gels has been measured by dynamic light scattering (DLS). The intensity correlation functions were analyzed by two methods. One was that employed previously in a DLS study of linear PS diffusion in PVME gels [N. A. Rotstein and T. P. Lodge, Macromolecules, Vol. 24. p. 1316 (1992)], and the other was based on consideration of possible nonergodicity effects [P. N. Pusey and W. van Megen, Physica A, Vol. 157, p. 705 (1990)]. Both methods gave equivalent results, suggesting that nonergodicity plays a small role in this system. This conclusion is not unreasonable, given that the PVME gels are almost isorefractive with the solvent (toluene), and that the signal is dominated by scattering from the PS chains. The resulting star diffusivities are consistently less than or equal to those for linear probes of comparable size, with the difference increasing with molecular weight. The diffusivities are also less than or equal to those obtained for the same stars in PVME solutions. A weak dependence on the number of arms is also observed. Finally, the mobility of a given star in a gel is much more sensitive to variations in the average molecular weight between cross-links than is the mobility of a linear chain. All of these features in the data are broadly consistent with the reptation hypothesis. © 1993 John Wiley & Sons, Inc.     

Molecular weight dependence of polystyrene segmental dynamics in dilute blends with poly(vinyl methyl ether)

The segmental dynamics of backbone‐deuterated polystyrenes (d₃PS) with varying molecular weights (1.7–67 kg/mol) have been measured in blends with poly(vinyl methyl ether) (PVME). ²H NMR T₁ values at 15 and 77 MHz are reported for the pure d₃PS and for the dilute d₃PS component in PVME matrices. The temperature shift that is needed to superpose the NMR T₁ data for the pure d₃PS and the d₃PS as a dilute component in the blend ranges from 45 to 70 K. In the framework of Lodge/McLeish model, the self‐concentration value for d₃PS in these dilute blends with PVME is found to be independent of molecular weight. We thus establish for this system that the substantial influence of molecular weight on the blend segmental dynamics can be explained by homopolymer T_g differences. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2252–2262, 2007     

Pressure dependence of the demixing behaviour in polymer blends: I. Experimental procedure

The most common way to influence the liquid-liquid phase behaviour in partially miscible (co-)polymer blends is changing the blending temperature. Since most extruders can handle pressures, up to 300 bar, pressure may also be used to influence the miscibility of polymers during blending. We have developed equipment and an experimental procedure to study the pressure dependence of the liquid-liquid demixing behaviour of high-viscous polymer blends under equilibrium conditions. Small amounts (1–4 grams) of specially made polymers are blended in the ‘DSM MINI EXTRUDER’. After a chosen mixing time, a small portion of the blend is injected into a small capillary tube and kept at the blending temperature. The phase behaviour of the blends as a function of temperature and pressure is studied via laser light scattering (at a scattering angle of 90°) in a specially made 400 bar/250°C window autoclave, where the capillary cell is placed in a high temperature grade silicon oil.     

Self-assembly via a complex phase transition in mixtures of polystyrene-block -polybutadiene block copolymer and poly(methyl vinyl ether)

The self-assembly of a binary mixture of polystyreneblock-polybutadiene (SB) and poly(methyl vinyl ether) (PVME) was studied by transmission electron microscopy and time-resolved light scattering. The self-assembly studied involved first microphase separation, in which a microdomain structure composed of polybutadiene block chains (PB) was formed in a matrix composed of polystyrene block chains (PS) and PVME homopolymers, and subsequently macrophase separation of the PVME from the microdomain phase of SB. The microphase separation was induced in a film preparation process using a solution cast method at room temperature. The macrophase separation was induced by rapidly heating the film specimens to above a critical temperature where PVME and PS undergo spinodal decomposition (SD). This complex phase transition, involving microphase separation followed by macrophase separation, was found to generate a superlattice structure (or a modulated structure) with two characteristic spacings: A_macro associated with the SD and A_micro associated with the microphase separation, both being generally time-dependent. The growth of the “macrodomains” was found to be pinned at A_macro ˜ 840 nm due to the elastic effect of the microdomain structure. The microdomain structure with A_micro ˜ 57 nm was found to undergo a morphological transition (a transition between two ordered phases of block copolymers) as a consequence of the local composition change of the two polymers induced by the SD.     

Phase behavior and photocrosslinking kinetics of semi-interpenetrating polymer networks prepared from miscible polymer blends

Mixtures of polystyrene derivatives (PSCS) and poly(vinyl methyl ether) (PVME) were made photocrosslinkable by chemically labeling PSCS chains with photoreactive anthracene. Miscibility of these anthracene-labeled PSCS/PVME blends was examined by light scattering under several crosslinking conditions in the one-phase region via photodimerization of anthracenes. As the reaction proceeds, the coexistence curve of PSCS/PVME blends shifts toward the low temperature side. By following the changes in concentration of anthracenes with irradiation time, it was found that the crosslinking reaction of PSCS chains in the blends does not follow the mean-field kinetics. However, it can be well expressed by the Kohlrausch–Williams–Watts (KWW) relaxation mechanism, indicating that the crosslinking reaction proceeds inhomogeneously in the blends. By scaling the reaction time with the average reaction rate obtained from the KWW equation modified for the reaction kinetics, all the crosslinking data obtained in the miscible region of the reacted blends fall on a single master curve. These experimental results suggest the universal behavior of the photocrosslinking kinetics obtained under the “shallow quench” conditions in the region far away from the coexistence curve of the reacting blends. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 455–462, 1998     

Sorption and diffusion of carbon dioxide in single-phase polystyrene/poly(vinylmethylether) blends

The sorption and transport properties of CO₂ in miscible PS/PVME blends at 20°C are reported as a function of pressure from 1 to 15 atm. The complex shape of isotherms for glassy blends and the concentration-dependent diffusion coefficient for rubbery blends reveal a plasticization by sorbed CO₂. The significant depression in T_g has to be taken into account in the analysis of the sorption data. Diffusion coefficient for CO₂ passes through a minimum when plotted against the blend composition. Such a behavior can be quantitatively related to the negative volume mixing of the PS/PVME system in the framework of the theories based on unoccupied volume. © 1996 John Wiley & Sons, Inc.