A Universal Approach for the Reversible Phase Transfer of Hydrophilic Nanoparticles

The ability to engineer the surface properties of magnetic nanoparticles is important for their various applications, as numerous physical and chemical properties of nanoscale materials are seriously affected by the chemical constitution of their surfaces. For some specific applications, nanoparticles need to be transferred from a polar to a nonpolar environment (or vice versa) after synthesis. In this work we have developed a universal method for the phase transfer of magnetic nanoparticles that preserves their shape and size. Octadecyltrimethoxysilane was used to cap the surfaces of the aqueous magnetic nanoparticles, thereby allowing their transfer into nonpolar solution. The resulting hydrophobic magnetic nanoparticles were transferred back into aqueous solution by subsequently covering them with an egg‐PC lipid monolayer. The superparamagnetic properties of the particles were retained after the phase transfer. The maximum transfer yields are dependent on their particle size with a maximum value of 93.16±4.75 % for magnetic nanoparticles with a diameter of 100 nm. The lipid‐modified magnetic particles were stable over 1 week, and thus they have potential applications in the field of biomedicine. This work also provides a facile strategy for the controllable engineering of the surface properties of nanoparticles.     

Phase transfer and its applications in nanotechnology

As nanoparticle syntheses in aqueous and organic systems have their own merits and drawbacks, specific applications may call for the transfer of newly formed nanoparticles from a polar to a non-polar environment (or vice versa) after synthesis. This critical review focuses on the application of phase transfer in nanoparticle synthesis, and features core-shell structures in bimetallic nanoparticles, replacement reactions in organic media, and catalytic properties of various nanostructures. It also describes the reversible organic and aqueous phase transfer of semiconductor and metallic nanoparticles for biological applications, and the use of phase transfer in depositing noble metals on semiconductor nanoparticles (258 references).     

Janus Nanoparticles: Preparation,Characterization, and Applications

In chemical functionalization of colloidal particles, the functional moieties are generally distributed rather homogeneously on the particle surface. Recently, a variety of synthetic protocols have been developed in which particle functionalization may be carried out in a spatially controlled fashion, leading to the production of structurally asymmetrical particles. Janus particles represent the first example in which the two hemispheres exhibit distinctly different chemical and physical properties, which is analogous to the dual‐faced Roman god, Janus. Whereas a variety of methods have been reported for the preparation of (sub)micron‐sized polymeric Janus particles, it has remained challenging for the synthesis and (unambiguous) structural characterization of much smaller nanometer‐sized Janus particles. Herein, several leading methods for the preparation of nanometer‐sized Janus particles are discussed and the important properties and applications of these Janus nanoparticles in electrochemistry, sensing, and catalysis are highlighted. Some perspectives on research into functional patchy nanoparticles are also given.     

Stimuli-triggered phase transfer of polymer-inorganic hybrid hairy particles between two immiscible liquid phases

Polymer brush-grafted particles (i.e., hairy particles) capable of undergoing direct, especially reversible, phase transfer from one liquid phase to another immiscible liquid phase in response to environmental changes have received growing interest due to their great potential in a wide variety of applications. This article is intended to review recent exciting advances in stimuli-triggered phase transfer of hairy particles in liquid-liquid biphasic systems. We start with a discussion of the mechanism of particle transfer across a liquid-liquid interface and progress to the synthesis of polymer brushes grafted on particles and the transfer of hairy particles between two immiscible liquid phases induced by various external stimuli, including temperature, pH, ionic strength, light, and solvents. The applications of thermally triggered phase transfer of hairy particles in catalysis (thermoregulated phase transfer catalysis) are discussed, followed by a summary and our perspective on future development. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1600–1619     

Analytical methods for separating and isolating magnetic nanoparticles

Despite the large body of literature describing the synthesis of magnetic nanoparticles, few analytical tools are commonly used for their purification and analysis. Due to their unique physical and chemical properties, magnetic nanoparticles are appealing candidates for biomedical applications and analytical separations. Yet in the absence of methods for assessing and assuring their purity, the ultimate use of magnetic particles and heterostructures is likely to be limited. In this review, we summarize the separation techniques that have been initially used for this purpose. For magnetic nanoparticles, it is the use of an applied magnetic flux or field gradient that enables separations. Flow based techniques are combined with applied magnetic fields to give methods such as magnetic field flow fractionation and high gradient magnetic separation. Additional techniques have been explored for manipulating particles in microfluidic channels and in mesoporous membranes. Further development of these and new analytical tools for separation and analysis of colloidal particles is critically important to enable the practical use of these, particularly for medicinal purposes.     

Microemulsions: Options To Expand the Synthesis of Inorganic Nanoparticles

Microemulsions (MEs) are ideal for obtaining high‐quality inorganic nanoparticles. As thermodynamically stable systems with a nanometer‐sized droplet phase that serves as a nanoreactor, MEs have obvious advantages for the synthesis of nanoparticles. MEs also have disadvantages, such as their complexity as multicomponent systems, the low amount of obtainable nanoparticles, their limited thermal stability, the fact that hydrolyzable or oxidizable compounds are often excluded from synthesis, the partly elaborate separation of nanoparticles, as well as the removal of surface‐adhered surfactants subsequent to synthesis. This Review presents some strategies to further expand the options of ME‐based synthesis of inorganic nanoparticles. This comprises the crystallization of nanoparticles in “high‐temperature MEs”, the synthesis of hollow nanospheres, the use of hydrogen peroxide or liquid ammonia as the polar droplet phase, and the synthesis of base metals and nitrides in MEs.     

Synthesis,Characterization, and Applications of Copper Nanoparticles

Copper nanoparticles with different structural properties and effective biological effects may be fabricated using new green protocols. The control over particle size and in turn size-dependent properties of copper nanoparticles is expected to provide additional applications. Various methods for the synthesis of copper nanoparticles have been reported including chemical methods, physical methods, biological methods, and green synthesis. Biological methods involve the use of plant extracts, bacteria, and fungi. Commendable work has been done regarding the synthesis and stability of copper nanoparticles. There is a need to summarize the behavior of copper nanoparticles in different media under various conditions. Here, a complete list of the literature on the synthesis of copper nanoparticles, their properties, stabilizing agents, factors affecting the morphology, and their applications is presented. The importance of copper nanoparticles compared to other metal nanoparticles are due to high conductivity. Methods for the synthesis of copper nanoparticles, including green protocols using plants and micro-organisms compared chemical methods, have also been reviewed.     

Reversible Diels–Alder Reactions with a Fluorescent Dye on the Surface of Magnetite Nanoparticles

Diels–Alder reactions on the surface of nanoparticles allow a thermoreversible functionalization of the nanosized building blocks. We report the synthesis of well-defined magnetite nanoparticles by thermal decomposition reaction and their functionalization with maleimide groups. Attachment of these dienophiles was realized by the synthesis of organophosphonate coupling agents and a partial ligand exchange of the original carboxylic acid groups. The functionalized iron oxide particles allow a covalent surface attachment of a furfuryl-functionalized rhodamine B dye by a Diels–Alder reaction at 60 °C. The resulting particles showed the typical fluorescence of rhodamine B. The dye can be cleaved off the particle surface by a retro-Diels–Alder reaction. The study showed that organic functions can be thermoreversibly attached onto inorganic nanoparticles.     

Modern Inorganic Aerogels

Essentially, the term aerogel describes a special geometric structure of matter. It is neither limited to any material nor to any synthesis procedure. Hence, the possible variety of materials and therefore the multitude of their applications are almost unbounded. In fact, the same applies for nanoparticles. These are also just defined by their geometrical properties. In the past few decades nano‐sized materials have been intensively studied and possible applications appeared in nearly all areas of natural sciences. To date a large variety of metal, semiconductor, oxide, and other nanoparticles are available from colloidal synthesis. However, for many applications of these materials an assembly into macroscopic structures is needed. Here we present a comprehensive picture of the developments that enabled the fusion of the colloidal nanoparticle and the aerogel world. This became possible by the controlled destabilization of pre‐formed nanoparticles, which leads to their assembly into three‐dimensional macroscopic networks. This revolutionary approach makes it possible to use precisely controlled nanoparticles as building blocks for macroscopic porous structures with programmable properties.     

The fabrication strategies and enhanced performances of metal-organic frameworks and carbon dots composites: State of the art review

Metal-organic frameworks (MOFs) with large specific surface area, considerable pore volume, controllable structure, and high concentration of active metal sites have been applied widely in researches like catalysis and sensing. However, potential applications of MOFs in both photocatalysis and luminescence sensors are facing major challenges arising from their severe charge recombination, low utilization of solar energy, low quantum yield, limited charge transfer between the metal ions/clusters and the ligand. Recent studies revealed that rational introduction of carbon dots (CDs) with excellent optical properties, unique quantum confinement and high conductivity can greatly enhance the functions of MOFs. In this paper, typical synthesis methods of these CD-MOF composites as well as their potential applications in photocatalysis and sensing are reviewed with emphasis. Representative examples of these CD-MOF composites are discussed, and key features and advantages of CD-MOF composites that will facilitate future applications are highlighted.     

Supported colloidal nanoparticles in heterogeneous gas phase catalysis: on the way to tailored catalysts

Using colloidally synthesized nanoparticles for the preparation of supported catalysts offers several advantages (e.g. precise control of particle size and morphology) when compared to traditional preparation techniques. Although such nanoparticles have already been very successfully used for catalytic applications in the liquid phase, applications in heterogeneous gas phase catalysis are still scarce. One aspect, usually considered as a problem, is organic stabilizers typically employed during the nanoparticle synthesis since they or their decomposition products are supposed to block catalytically active sites on the nanoparticle surface. Thus, in many studies so far, the removal of the organic ligands prior to use in gas phase catalysis has been proposed. In this perspective article, however, we will discuss a number of benefits such ligand shells may have for heterogeneous gas phase catalysis, including the protection against chemical modification, prevention of sintering and tuning of SMSI effects.     

Review: Bioanalytical applications of biomolecule-functionalized nanometer-sized doped silica particles

Recent research has looked to develop innovative and powerful novel biofunctionalized nanometer-sized silica particles, controlling and tailoring their properties in a very predictable manner to meet the needs of specific applications. The silica shells of these particles facilitate a wide variety of surface reactions and allow conjugation with biomolecules like proteins and DNA. There exist a multitude of possible applications of fabricated nanoparticles in biotechnology and medicine. In particular, they have proved to be highly useful for biosensing, assay labelling, bioimaging, and in research on a variety of molecular tags in cellular and molecular biology. Techniques commonly rely on the use of silica-coated semiconductor quantum dots, organic dyes, magnetic particles, and Raman active particles. Inorganic-biological hybrid particles combine the properties of both materials, i.e., the spectroscopic characteristics of the entrapped nanocrystal, and the biomolecular function of the conjugated entity. Rather than being exhaustive, this review focuses on selected examples to illustrate novel concepts and promising applications. Approaches described include the encoding of silica nanoparticles with different groups, and conjugation with various biological entities. Further, promising applications in bioanalysis are considered and discussed.     

原位生成法制备高分子磁性粒子

高分子和无机磁性粒子间因其特性的差异,较难进行均匀的复合与杂化,而原位生成法可以制得磁性粒子均匀复合的结构,较好地解决这一问题.本文对近年来国内外采用原位生成法制备磁性复合粒子的方法进行了比较和综述.     

Aqueous-organic phase-transfer of highly stable gold, silver, and platinum nanoparticles and new route for fabrication of gold nanofilms at the oil/water interface and on solid supports

A simple but effective aqueous-organic phase-transfer method for gold, silver, and platinum nanoparticles was developed on the basis of the decrease of the PVP's solubility in water with the temperature increase. The present method is superior in the transfer efficiency of highly stable nanoparticles to the common phase-transfer methods. The gold, silver, and platinum nanoparticles transferred to the 1-butanol phase dispersed well, especially silver and platinum particles almost kept the previous particle size. Electrochemical synthesis of gold nanoparticles in an oil-water system was achieved by controlling the reaction temperature at 80 degrees C, which provides great conveniences for collecting metal particles at the oil/water interface and especially for fabricating dense metal nanoparticle films. A technique to fabricate gold nanofilms on solid supports was also established. The shapes and sizes of gold nanoparticles as the building blocks may be controllable through changing reaction conditions.     

The golden age: gold nanoparticles for biomedicine

Gold nanoparticles have been used in biomedical applications since their first colloidal syntheses more than three centuries ago. However, over the past two decades, their beautiful colors and unique electronic properties have also attracted tremendous attention due to their historical applications in art and ancient medicine and current applications in enhanced optoelectronics and photovoltaics. In spite of their modest alchemical beginnings, gold nanoparticles exhibit physical properties that are truly different from both small molecules and bulk materials, as well as from other nanoscale particles. Their unique combination of properties is just beginning to be fully realized in range of medical diagnostic and therapeutic applications. This critical review will provide insights into the design, synthesis, functionalization, and applications of these artificial molecules in biomedicine and discuss their tailored interactions with biological systems to achieve improved patient health. Further, we provide a survey of the rapidly expanding body of literature on this topic and argue that gold nanotechnology-enabled biomedicine is not simply an act of 'gilding the (nanomedicinal) lily', but that a new 'Golden Age' of biomedical nanotechnology is truly upon us. Moving forward, the most challenging nanoscience ahead of us will be to find new chemical and physical methods of functionalizing gold nanoparticles with compounds that can promote efficient binding, clearance, and biocompatibility and to assess their safety to other biological systems and their long-term term effects on human health and reproduction (472 references).     

Biological applications of magnetic nanoparticles

In this review an overview about biological applications of magnetic colloidal nanoparticles will be given, which comprises their synthesis, characterization, and in vitro and in vivo applications. The potential future role of magnetic nanoparticles compared to other functional nanoparticles will be discussed by highlighting the possibility of integration with other nanostructures and with existing biotechnology as well as by pointing out the specific properties of magnetic colloids. Current limitations in the fabrication process and issues related with the outcome of the particles in the body will be also pointed out in order to address the remaining challenges for an extended application of magnetic nanoparticles in medicine.     

Synthesis and characterization of thiosalicylic acid stabilized gold nanoparticles

We report the synthesis of photoluminescent Au nanoparticles of varying sizes stabilized with a carboxylate group terminated aromatic thiol, thiosalicylic acid. The formation of Au nanoparticles and its stabilization with the thiol has been characterized by different spectroscopic and thermal methods. The water solubility, along with the low degree of aggregation and photoluminescence, enhances their suitability for biological applications. The photoluminescence may be due to charge transfer of the Au core with the stabilizing ligand.     

气体膨胀液体技术制备纳米微粒研究进展

近年来,利用气体膨胀液体的相行为已经开发了许多气体膨胀液体微粒制备方法,并已在制备无机、有机材料、有机金属固体、医药、电子等方面的微细颗粒方面得到广泛应用。本文介绍了气体膨胀液体制备纳米颗粒的研究和应用进展。     

From colloids in liquid crystals to colloidal liquid crystals

ABSTRACT

Liquid crystals in combination with nanoparticles are a fascinating topic of research, because of the wealth of aspects and questions to study. These range from simple effects of nanoparticles on phase transitions and phase diagrams, to the tuning of physical properties, adding of novel functionalities, all the way to the formation of spontaneous order by nanoparticles themselves and the possibilities that templating has for future materials design and applications. This article intends to provide a flavour of the multiplicity, variety and diversity that these thermotropic and lyotropic systems have to offer in the area of materials development, which we believe will become increasingly important, especially for switchable non-display applications and nanotechnology. It is not intended to provide a conclusive overview, which would be a presumptuous attempt considering the limited space available, but rather to place our own work into a wider context and to point out some more recent developments and trends in liquid crystal – nanoparticle dispersions.     

Strategies for the intracellular delivery of nanoparticles

The ability to target contrast agents and therapeutics inside cells is becoming important as we strive to decipher the complex network of events that occur within living cells and design therapies that can modulate these processes. Nanotechnology researchers have generated a growing list of nanoparticles designed for such applications. These particles can be assembled from a variety of materials into desirable geometries and configurations and possess useful properties and functionalities. Undoubtedly, the effective delivery of these nanomaterials into cells will be critical to their applications. In this tutorial review, we discuss the fundamental challenges of delivering nanoparticles into cells and to the targeted organelles, and summarize strategies that have been developed to-date.