Cu3(hexaiminotriphenylene)2: An Electrically Conductive 2D Metal–Organic Framework for Chemiresistive Sensing

The utility of metal–organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm^?1 (pellet, two‐point‐probe). Devices synthesized by simple drop casting of Cu₃(HITP)₂ dispersions function as reversible chemiresistive sensors, capable of detecting sub‐ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni₃(HITP)₂ shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.     

Layer‐by‐Layer Assembled Conductive Metal–Organic Framework Nanofilms for Room‐Temperature Chemiresistive Sensing

The utility of electronically conductive metal–organic frameworks (EC‐MOFs) in high‐performance devices has been limited to date by a lack of high‐quality thin film. The controllable thin‐film fabrication of an EC‐MOF, Cu₃(HHTP)₂, (HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene), by a spray layer‐by‐layer liquid‐phase epitaxial method is reported. The Cu₃(HHTP)₂ thin film can not only be precisely prepared with thickness increment of about 2 nm per growing cycle, but also shows a smooth surface, good crystallinity, and high orientation. The chemiresistor gas sensor based on this high‐quality thin film is one of the best room‐temperature sensors for NH₃ among all reported sensors based on various materials.     

Fabrication of Crystalline Microporous Membrane from 2D MOF Nanosheets for Gas Separation

Metal‐organic frameworks (MOFs)‐based membranes have shown great potentials as applications in gas separation. In this work, a uniform membrane based on 2D MOF Ni₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaaminotriphenylene) was fabricated on ordered macroporous AAO via the filtration method. To fabricate the membrane, we obtained the Ni₃(HITP)₂ nanosheets as building blocks via a soft‐physical exfoliation method successfully that were confirmed by AFM and TEM. We also studied the H₂, CO₂ and N₂ adsorption isotherms of Ni₃(HITP)₂ powder at room temperature, which shows Ni₃(HITP)₂ has high heats of adsorption for CO₂ and high selectivity of CO₂ over N₂. Gas permeation tests indicate that the Ni₃(HITP)₂ membrane shows high permeance and selectivity of CO₂ over N₂, as well as good selectivity of H₂ over N₂. The ideal separation factors of CO₂/N₂ and H₂/N₂ from sing‐gas permeances are 13.6 and 7.8 respectively, with CO₂ permeance of 3.15×10^?6 mol?m^?2?s^?1?Pa^?1. The membrane also showed good stability, durability and reproducibility, which are of potential interest for practical applications in the CO₂ separations.     

P∩N Bridged Cu(I) Dimers Featuring Both TADF and Phosphorescence. From Overview towards Detailed Case Study of the Excited Singlet and Triplet States

We present an overview over eight brightly luminescent Cu(I) dimers of the type Cu₂X₂(P∩N)₃ with X = Cl, Br, I and P∩N = 2-diphenylphosphino-pyridine (Ph₂Ppy), 2-diphenylphosphino-pyrimidine (Ph₂Ppym), 1-diphenylphosphino-isoquinoline (Ph₂Piqn) including three new crystal structures (Cu₂Br₂(Ph₂Ppy)₃ 1-Br, Cu₂I₂(Ph₂Ppym)₃ 2-I and Cu₂I₂(Ph₂Piqn)₃ 3-I). However, we mainly focus on their photo-luminescence properties. All compounds exhibit combined thermally activated delayed fluorescence (TADF) and phosphorescence at ambient temperature. Emission color, decay time and quantum yield vary over large ranges. For deeper characterization, we select Cu₂I₂(Ph₂Ppy)₃, 1-I, showing a quantum yield of 81%. DFT and SOC-TDDFT calculations provide insight into the electronic structures of the singlet S₁ and triplet T₁ states. Both stem from metal+iodide-to-ligand charge transfer transitions. Evaluation of the emission decay dynamics, measured from 1.2 ≤ T ≤ 300 K, gives ∆E(S₁-T₁) = 380 cm⁻¹ (47 meV), a transition rate of k(S₁→S₀) = 2.25 × 10⁶ s⁻¹ (445 ns), T₁ zero-field splittings, transition rates from the triplet substates and spin-lattice relaxation times. We also discuss the interplay of S₁-TADF and T₁-phosphorescence. The combined emission paths shorten the overall decay time. For OLED applications, utilization of both singlet and triplet harvesting can be highly favorable for improvement of the device performance.     

气液界面法组装的Ni3(HITP)2电致变色薄膜及其性能

由于缺乏可控的成膜技术,三亚苯类金属有机框架(MOFs)材料的应用受到了限制。我们在气液界面组装了不同厚度的Ni₃(HITP)₂薄膜(HITP^3-=2,3,6,7,10,11-六亚氨基三亚苯),并将制备的薄膜转移到导电玻璃表面。利用X射线衍射(XRD)、场发射透射电子显微镜(FETEM)、场发射扫描电镜(FESEM)、X射线光电子能谱(XPS)和拉曼光谱对样品的晶体结构、微观形貌和元素组成进行表征,采用紫外可见分光光度计以及电化学工作站对Ni₃(HITP)₂薄膜的电化学和电致变色性能进行了研究和表征。结果表明,得益于Ni₃(HITP)₂电致变色薄膜的多孔结构和与电解液良好的接触,所得薄膜电极N-20具有较短的着色响应时间/褪色响应时间(0.6/0.7 s),且着色效率可达530 cm²·C^-1;而N-50具有较大的光调制范围(740 nm,70%)。     

Copper coordination polymers from cavitand ligands: hierarchical spaces from cage and capsule motifs,and other topologies

The cyclotriveratrylene-type ligands (±)-tris(iso-nicotinoyl)cyclotriguaiacylene L1 (±)-tris(4-pyridylmethyl)cyclotriguaiacylene L2 and (±)-tris{4-(4-pyridyl)benzyl}cyclotriguaiacylene L3 all feature 4-pyridyl donor groups and all form coordination polymers with Cu^I and/or Cu^II cations that show a remarkable range of framework topologies and structures. Complex [Cu^I ₄Cu^II _1.5(L1)₃(CN)₆]·CN·n(DMF) 1 features a novel 3,4-connected framework of cyano-linked hexagonal metallo-cages. In complexes [Cu₃(L2)₄(H₂O)₃]·6(OTf)·n(DMSO) 2 and [Cu₂(L3)₂Br₂(H₂O)(DMSO)]·2Br·n(DMSO) 3 capsule-like metallo-cryptophane motifs are formed which linked through their metal vertices into a hexagonal 2D network of (4³.12³)(4².12²) topology or a coordination chain. Complex [Cu₂(L1)₂(OTf)₂(NMP)₂(H₂O)₂]·2(OTf)·2NMP 4 has an interpenetrating 2D 3,4-connected framework of (4.6².8)(6².8)(4.6².8²) topology with tubular channels. Complex [Cu(L1)(NCMe)]·BF₄·2(CH₃CN)·H₂O 5 features a 2D network of 6³ topology while the Cu^II analogue [Cu₂(L1)₂(NMP)(H₂O)]·4BF₄·12NMP·1.5H₂O 6 has an interpenetrating (10,3)-b type structure and complex [Cu₂(L2)₂Br₃(DMSO)]·Br·n(DMSO) 7 has a 2D network of 4.8² topology. Strategies for formation of coordination polymers with hierarchical spaces emerge in this work and complex 2 is shown to absorb fullerene-C₆₀ through soaking the crystals in a toluene solution.     

Ultrasensitive NOX Detection in Simulated Exhaled Air: Enhanced Sensing via Alumina Modification of In‐Situ Grown WO3 Nanoblocks

Seedless growth of vertically aligned nanostructures, which can induce smoother transport and minimize Ohmic contact between substrate and semiconductor, can be fabricated by in situ growth utilizing modified hydrothermal methods. Such devices can be useful in designing non‐invasive ultrasensitive hand‐held sensors for diagnostic identification of volatile organic compounds (VOCs) in exhaled air, offering pain‐free and easier detection of long‐term diseases such as asthma. In the present work, WO₃ nanoblocks, with a high surface area and porosity, have been grown directly over transparent conducting oxide to minimize Ohmic resistance, facilitating smoother electron transfer and enhanced current response. Further modification with porous alumina (γ‐Al₂O₃), by electrodeposition, resulted in the selective and ultrasensitive detection of NO_X in simulated exhaled air. Crystal phase purity of as‐fabricated pristine as well modified samples is validated with X‐ray diffraction analysis. Morphological and microstructural analyses reveal the successful deposition of porous alumina over the surface of WO₃. Improved surface area and porosity is presented by porous alumina in the modified WO₃ device, suggesting more active sites for the gas molecules to get adsorbed and diffuse through the pores. Oxygen vacancies, which are detrimental in the transport phenomenon in the presented sensors, have been studied using X‐ray photoelectron spectroscopic (XPS) analysis. Gas sensing studies have been performed by fabricating chemiresistor devices based on bare WO₃ and Al₂O₃‐modified WO₃. The higher sensitivity for NO_X gas in case of γ‐Al₂O₃‐modified WO₃ based devices, as compared to bare WO₃‐based devices, is attributed to the better surface area and charge transport kinetics. The presented device strategy offers crucial understanding in the design and development of non‐invasive, hand‐held devices for NO gas present in the human breath, with potential application in medical diagnostics.     

Synthesis of a Novel Unexpected Cu(II)–Thiazolidine Complex—X-ray Structure,Hirshfeld Surface Analysis,and Biological Studies

An unexpected trinuclear Cu(II)–thiazolidine complex has been synthesized by mixing CuCl₂·2H₂O with the Schiff base ligand, 1-(((4,5-dihydrothiazol-2-yl)ethylidene)hydrazono)methyl)phenol L, in ethanol. Unexpectedly, the reaction proceeded via the hydrolysis of the Schiff base L, followed by cyclization to afford 3-methyl-5,6-dihydrothiazolo[3,2-c][1,2,3]triazole (L^a), then complexation with the Cu(II) salt, forming the trinuclear [Cu₃(L^a)₄(Cl)₆] complex. The complex was characterized by means of FTIR spectra, elemental analysis, and X-ray crystallography. In the trinuclear [Cu₃(L^a)₄(Cl)₆] complex, there are two crystallographically independent hexa- and penta-coordinated Cu(II) sites, where the thiazolidine ligand L^a units act as a monodentate ligand and a linker between the Cu(II) centers. The crystal packing of the [Cu₃(L^a)₄(Cl)₆] complex is primarily affected by the weak non-covalent C-H∙∙∙Cl interactions. In accordance with Hirshfeld surface analysis, the Cl∙∙∙H, H∙∙∙H, S∙∙∙H, and N∙∙∙H percentages are 31.9%, 27.2%, 13.5%, and 9.9%, respectively. X-ray photoelectron spectroscopy confirmed the oxidation state of copper as Cu(II), as well as the presence of two different coordination environments around copper centers. The complex showed interesting antibacterial activity against the Gram-positive bacteria S. subtilis, with MIC = 9.7 µg/mL compared to MIC = 4.8 µg/mL for the control, gentamycin. Moreover, the Cu(II) complex showed an equal MIC (312.5 µg/mL) against C. albicans compared to ketoconazole. It also exhibits a very promising inhibitory activity against colon carcinoma (IC₅₀ = 3.75 ± 0.43 µg/mL).     

Copper and copper-palladium catalysts of aliphatic thiols oxidation in biological objects: Quantum-chemical DFT simulation

DFT calculations (M06, PBE0/Def2-TZVP) of coordination compounds used in reactions of selective oxidation of thiols to disulfides were performed. Primary active centers of the catalysts are polynuclear scaffolds {L₂M(μ-OH)₂ML₂}²⁺ and {L₂M(μ-OH)₂M′(μ-OH)₂ML₂}²⁺ (M = Cu^I, Cu^II, Pd^II; M' = Cu^II; L = NH₃). Cu^II ions in combination with PdII ions are capable of formation of polynuclear active center {PdII(μ-OH)₂Cu^II(μ-OH)₂Pd^II}²⁺ bringing together a large number of mutually oriented RS^– groups and thus affecting the rate of formation of disulfide R₂S₂.     

Self-Assembly of Antiferromagnetically-Coupled Copper(II) Supramolecular Architectures with Diverse Structural Complexities

The self-assembly of 2,6-diformyl-4-methylphenol (DFMP) and 1-amino-2-propanol (AP)/2-amino-1,3-propanediol (APD) in the presence of copper(II) ions results in the formation of six new supramolecular architectures containing two versatile double Schiff base ligands (H₃L and H₅L1) with one-, two-, or three-dimensional structures involving diverse nuclearities: tetranuclear [Cu₄(HL²⁻)₂(N₃)₄]·4CH₃OH·56H₂O (1) and [Cu₄(L³⁻)₂(OH)₂(H₂O)₂] (2), dinuclear [Cu₂(H₃L1²⁻)(N₃)(H₂O)(NO₃)] (3), polynuclear {[Cu₂(H₃L1²⁻)(H₂O)(BF₄)(N₃)]·H₂O}_n (4), heptanuclear [Cu₇(H₃L1²⁻)₂(O)₂(C₆H₅CO₂)₆]·6CH₃OH·44H₂O (5), and decanuclear [Cu₁₀(H₃L1²⁻)₄(O)₂(OH)₂(C₆H₅CO₂)₄] (C₆H₅CO₂)₂·20H₂O (6). X-ray studies have revealed that the basic building block in 1, 3, and 4 is comprised of two copper centers bridged through one μ-phenolate oxygen atom from HL²⁻ or H₃L1²⁻, and one μ-1,1-azido (N₃⁻) ion and in 2, 5, and 6 by μ-phenoxide oxygen of L³⁻ or H₃L1²⁻ and μ-O²⁻ or μ₃-O²⁻ ions. H-bonding involving coordinated/uncoordinated hydroxy groups of the ligands generates fascinating supramolecular architectures with 1D-single chains (1 and 6), 2D-sheets (3), and 3D-structures (4). In 5, benzoate ions display four different coordination modes, which, in our opinion, is unprecedented and constitutes a new discovery. In 1, 3, and 5, Cu(II) ions in [Cu₂] units are antiferromagnetically coupled, with J ranging from −177 to −278 cm⁻¹.     

ESR and TPD Study of the Interaction of Nitromethane and Ammonia with HZSM-5 and CuZSM-5 Zeolites

The properties of complexes formed on HZSM-5 and CuZSM-5 zeolites in the course of ammonia and nitromethane adsorption are studied. Ammonia adsorbs on CuZSM-5 and forms two species, which decompose at different temperatures T _dec. One is due to the formation of the Cu²⁺(NH₃)₄ complex (T _dec = 450 K), and the other is assigned to ammonia adsorbed on copper(II) compounds, Cu²⁺O^– and Cu²⁺–O^2––Cu²⁺, or CuO clusters (T _dec = 650–750 K). Ammonia adsorption on Cu⁺ and Cu⁰ is negligible compared with that on the Brönsted acid sites and copper(II). Nitromethane adsorbed on HZSM-5 and CuZSM-5 at 400–500 K transforms into a series of products including ammonia. Ammonia also forms complexes with the Brönsted acid sites and copper(II) similar to those formed in the course of adsorption from the gas phase, but the Cu²⁺(NH₃)₄ complexes on CuZSM-5 are not observed. Possible structures of ammonia and nitromethane complexes on Brönsted acid sites and the Cu²⁺ cations in zeolite channels are discussed. The role of these complexes in selective NO _x reduction by hydrocarbons over the zeolites is considered in connection with their thermal stability.     

Encapsulation of tricopper cluster in a synthetic cryptand enables facile redox processes from CuICuICuI to CuIICuIICuII states

One-pot reaction of tris(2-aminoethyl)amine (TREN), [Cu^I(MeCN)₄]PF₆, and paraformaldehyde affords a mixed-valent [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ complex. The macrocyclic azacryptand TREN₄ contains four TREN motifs, three of which provide a bowl-shape binding pocket for the [Cu₃(μ₃-OH)]³⁺ core. The fourth TREN caps on top of the tricopper cluster to form a cryptand, imposing conformational constraints and preventing solvent interaction. Contrasting the limited redox capability of synthetic tricopper complexes reported so far, [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ exhibits several reversible single-electron redox events. The distinct electrochemical behaviors of [TREN₄Cu^IICu^ICu^I(μ₃-OH)](PF₆)₃ and its solvent-exposed analog [TREN₃Cu^IICu^IICu^II(μ₃-O)](PF₆)₄ suggest that isolation of tricopper core in a cryptand enables facile electron transfer, allowing potential application of synthetic tricopper complexes as redox catalysts. Indeed, the fully reduced [TREN₄Cu^ICu^ICu^I(μ₃-OH)](PF₆)₂ can reduce O₂ under acidic conditions. The geometric constraints provided by the cryptand are reminiscent of Nature''s multicopper oxidases (MCOs). For the first time, a synthetic tricopper cluster was isolated and fully characterized at Cu^ICu^ICu^I (4a), Cu^IICu^ICu^I (4b), and Cu^IICu^IICu^I (4c) states, providing structural and spectroscopic models for many intermediates in MCOs. Fast electron transfer rates (10⁵ to 10⁶ M⁻¹ s⁻¹) were observed for both Cu^ICu^ICu^I/Cu^IICu^ICu^I and Cu^IICu^ICu^I/Cu^IICu^IICu^I redox couples, approaching the rapid electron transfer rates of copper sites in MCO.

Geometric constraints and site isolation provided by the cryptand enable reversible redox of tricopper μ-oxo cluster.     

Oxygen reduction reaction on Ni3(HITP)2: A catalytic site that leads to high activity

As one kind of metal-organic frameworks (MOFs), Ni₃(HITP)₂ has recently been demonstrated to manifest high oxygen reduction reaction (ORR) performance due to its unique structure and property. However, the origin of the high activity of this experimentally synthesized material remains ambiguous. Herein, we performed detailed theoretical studies on the electrocatalytic ORR of the Ni₃(HITP)₂ monolayer. The calculated results uncover that, in addition to the traditional NiN catalytic site, the H atoms directly bonded to the N atoms can also act as the active site for ORR, with the activity even higher than that of NiN moiety. The relative energy diagrams show that the favorable ORR pathway on all possible active sites is the two-electron reduction mechanism from O₂ to H₂O₂, which is well consistent with the experimental observations. Furthermore, the first-principles molecular dynamics simulations show that Ni₃(HITP)₂ also presents excellent thermodynamic stability.     

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (−110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•–)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II–(O₂^2–)–Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II–O–Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II−(O₂²⁻)−Mn^IV(TPP)−(O₂²⁻)−Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = −44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.     

Adsorption of volatile organic compounds in porous metal–organic frameworks functionalized by polyoxometalates

The functionalization of porous metal–organic frameworks (Cu₃(BTC)₂) was achieved by incorporating Keggin-type polyoxometalates (POMs), and further optimized via alkali metal ion-exchange. In addition to thermal gravimetric analysis, IR, single-crystal X-ray diffraction, and powder X-ray diffraction, the adsorption properties were characterized by N₂ and volatile organic compounds (VOCs) adsorption measurements, including short-chain alcohols (C<4), cyclohexane, benzene, and toluene. The adsorption enthalpies estimated by the modified Clausius–Clapeyron equation provided insight into the impact of POMs and alkali metal cations on the adsorption of VOCs. The introduction of POMs not only improved the stability, but also brought the increase of adsorption capacity by strengthening the interaction with gas molecules. Furthermore, the exchanged alkali metal cations acted as active sites to interact with adsorbates and enhanced the adsorption of VOCs.     

Synthesis,electrochemical and e.p.r. spectral studies of binuclear copper(II) complexes with new pentadentate L-proline-based binucleating ligands

The synthesis, reduction, optical and e.p.r. spectral properties of a series of new binuclear copper(II) complexes, containing bridging moieties (OH^–, MeCO₂ ^–, NO₂ ^–, and N₃ ^–), with new proline-based binuclear pentadentate Mannich base ligands is described. The ligands are: 2,6-bis[(prolin-1-yl)methyl]4-bromophenol [H₃L¹], 2,6-bis[(prolin-1-yl)methyl]4-t-butylphenol [H₃L²] and 2,6-bis[(prolin-1-yl)methyl]4-methoxyphenol [H₃L³]. The exogenous bridging complexes thus prepared were hydroxo: [Cu₂L¹(OH)(H₂O)₂] · H₂O (1a), [Cu₂L²(OH)(H₂O)₂] · H₂O (1b), [Cu₂L³(OH)(H₂O)₂] · H₂O (1c), acetato [Cu₂L¹(OAc)] · H₂O (2a), [Cu₂L²(OAc)] · H₂O (2b), [Cu₂L³(OAc)] · H₂O (2c), nitrito [Cu₂L¹(NO₂)(H₂O)₂] · H₂O (3a), [Cu₂L²(NO₂)(H₂O)₂] · H₂O (3b), [Cu₂L³(NO₂)(H₂O)₂] · H₂O (3c) and azido [Cu₂L¹(N₃)(H₂O)₂] · H₂O (4a), [Cu₂L²(N₃)(H₂O)₂] · H₂O (4b) and [Cu₂L³(N₃)(H₂O)₂] · H₂O (4c). The complexes were characterized by elemental analysis and by spectroscopy. They exhibit resolved copper hyperfine e.p.r. spectra at room temperature, indicating the presence of weak antiferromagnetic coupling between the copper atoms. The strength of the antiferromagnetic coupling lies in the order: NO₂ N₃ OH OAc. Cyclic voltammetry revealed the presence of two redox couples Cu^IICu^II Cu^IICu^I Cu^ICu^I. The conproportionality constant K _con for the mixed valent Cu^IICu^I species for all the complexes have been determined electrochemically.     

Münzmetallcluster mit verbrückenden Imido‐ und Amidoliganden: [{Li(dme)3}4][Cu18(NPh)11] und [Ag6(NHPh)4(PnPr3)6Cl2]

Copper and Silver Clusters with Bridging Imido and Amido Ligands From the reactions of copper and silver chloride with tertiary phosphines and lithiated aniline the compounds [{Li(dme)₃}₄][Cu₁₈(NPh)₁₁] ( 1 ) and [Ag₆(NHPh)₄(PⁿPr₃)₆Cl₂] ( 2 ) were obtained. The structure of the anion in 1 is closely related to the structures of the reported clusters [Cu₁₂(NPh)₈]^4– [1] and [Cu₂₄(NPh)₁₄]^4– [2]: 1 represents the third phenyl imido bridged copper cluster which contains parallel Cu₃‐ and Cu₆‐planes. The dimeric compound 2 consists of two Ag₃ units with bridging phenyl amido ligands. Two chloride and six phosphine ligands complete the ligand sphere and shield the metal core effectively.     

Synthesis and Crystal Structure of the Heterovalent Copper(I,II) π-Complex Cu7Br6.48Cl1.52 ? 2C3N3(OC3H5)3

Single crystals of the heterovalent Cu^I,Cu^II π,σ-complex Cu₇Br_6.48Cl_1.52 ⋅ 2C₃N₃(OC₃H₅)₃ are synthesized by the ac electrochemical method from an ethanol solution containing 2,4,6-triallyloxy-1,3,5-triazine, CuCl₂ ⋅ 2H₂O, and CuBr₂. The unit cell parameters of the crystals are: space group , a = 8.271(3) Å, b = 11.391(3) Å, c = 11.821(3) Å, α = 67.43(1)°, β = 84.41(2)°, γ = 85.14(2)°, V = 1022(1) ų, and R(F) = 0.0714. The copper and halogen atoms form unique moieties Cu₆X₆ linked by bridging fragments [Cu²⁺ (C₃N₃(OC₃H₅)₃)₂]X₂ into infinite chains. Each inorganic moiety Cu₆X₆ is linked with four 2,4,6-triallyl- oxy-1,3,5-triazine molecules. The ligand molecule is coordinated to one Cu^II atom through the nitrogen atom of the triazine cycle and to two Cu^I atoms through the C=C bonds of two allyl groups. The Br content equal to 0.57 in the X(4) position linking the Cu^I and Cu^II atoms differs markedly from a value of 0.85–0.91 for the X(1), X(2), and X(3) positions linked only with the Cu(I) atoms.__________Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 6, 2005, pp. 455–461.Original Russian Text Copyright © 2005 by Goreshnik, Schollmeyer, Mys’kiv.     

Preferential energy transfer from N2(A) to specific energy levels of Cu atoms

Emission spectra resulting from reaction of “clean” N₂(A³ Σ_u⁺) with copper atoms were studied using a flowing afterglow apparatus. The population distribution of the Cu states was calculated from the spectrum; it indicates that Cu atoms are excited by nearly resonant energy transfer processes. N₂(A,v') + Cu(²S_{$\text{1}\text{2}$}) → N₂(X, v) + Cu^* , and that the transfer is most efficient for N₂(A,v') → N₂(X,v) transitions with large Franck-Condon factors. The preferential energy transfer results in population inversion between some of the Cu states.     

Synthesis, Crystal and Molecular Structures, and Properties of Optically Active Copper(II) Complexes with 3-N,N-Dimethylaminocaran-4-one-oxime

Copper(II) complexes with 3-N,N-dimethylaminocaran-4-one-oxime (HL) were synthesized and characterized by X-ray diffraction analysis, photoelectronic, IR, and EPR spectroscopy, magnetic susceptibility, and thermal analysis methods, and their optical activities were studied. The [Cu₂(HL)₂Cl₄] complex is a dimer with weak exchange interactions between unpaired electrons of the Cu(II) ions. The [Cu₃L₃(OH)Cl]Cl · 8H₂O structure is composed of triangular trinuclear complex cations, outer-sphere Cl^–anions, and water molecules. The exchange parameter Jfor the trinuclear exchange cluster is –190 cm^–1. The title complexes are optically active in the visible range of the spectrum.