Monthly Increase in Vitamin D Levels upon Supplementation with 2000 IU/Day in Healthy Volunteers: Result from “Integriamoci”, a Pilot Pharmacokinetic Study

Vitamin D (VD) is a calcium- and phosphate-controlling hormone used to treat bone disorders; yet, several other effects are progressively emerging. VD deficiency is highly prevalent worldwide, with suboptimal exposure to sunlight listed among the leading causes: oral supplementation with either cholecalciferol or calcitriol is used. However, there is a scarcity of clinical studies investigating how quickly VD concentrations can increase after supplementation. In this pilot study, the commercial supplement ImmuD3 (by Erboristeria Magentina^®) was chosen as the source of VD and 2000 IU/day was administered for one month to 21 healthy volunteers that had not taken any other VD supplements in the previous 30 days. Plasma VD levels were measured through liquid chromatography coupled to tandem mass spectrometry after 7, 14, and 28 days of supplementation. We found that 95% of the participants had insufficient VD levels at baseline (<30 ng/mL; median 23.72 ng/mL; IQR 18.10–26.15), but after 28 days of supplementation, this percentage dropped to 62% (median 28.35 ng/mL; IQR 25.78–35.20). The median increase in VD level was 3.09 ng/mL (IQR 1.60–5.68) after 7 days and 8.85 ng/mL (IQR 2.85–13.97F) after 28 days. This study suggests the need for continuing VD supplementation and for measuring target level attainment.     

Potential of Carvacrol and Thymol in Reducing Biofilm Formation on Technical Surfaces

Polyvinyl chloride (PVC), polypropylene (PP), polyethylene (PE), and stainless steel (SS) are commonly used in medicine and food production technologies. During contact with microorganisms on the surface of these materials, a microbial biofilm is formed. The biofilm structure is difficult to remove and promotes the development of pathogenic bacteria. For this reason, the inhibition of biofilm formation in medical and food production environments is very important. For this purpose, five naturally occurring compounds were used for antimicrobial screening tests. The two with the best antimicrobial properties were chosen to inhibit the biofilm formation of Staphylococcus aureus and Pseudomonas aeruginosa. After 3 days of exposure, thymol reduced the amount of biofilm of Pseudomonas aeruginosa within the range of 70–77% and 52–75% for Staphylococcus aureus. Carvacrol inhibited the formation of biofilms by up to 74–88% for Pseudomonas aeruginosa and up to 86–100% for Staphylococcus aureus. Those phenols decreased the enzyme activity of the biofilm by up to 40–100%. After 10 days of exposure to thymol, biofilm formation was reduced by 80–100% for Pseudomonas aeruginosa and by about 79–100% for Staphylococcus aureus. Carvacrol reduced the amount of biofilm by up to 91–100% for Pseudomonas aeruginosa and up to 95–100% for Staphylococcus aureus.     

Properties of Rice-Based Beverages Fermented with Lactic Acid Bacteria and Propionibacterium

In recent times, consumers have shown increasing interest in plant substitutes for fermented dairy products. This study aimed to investigate the properties of yogurt-type rice-based beverages fermented with lactic acid bacteria and Propionibacterium. The changes in pH, viable population of bacteria, physical properties, and carbohydrate content of these beverages were tested. Fermentation using only Propionibacterium was insufficient to obtain a product with an acidity level similar to that of milk-based yogurt (pH < 4.5). After fermentation, the tested beverages had a high number of Lactobacillus sp. (7.42–8.23 log10 CFU/mL), Streptococcus thermophilus (8.01–8.65 log10 CFU/mL), and Bifidobacterium animalis subsp. lactis (8.28–8.50 log10 CFU/mL). The hardness (2.90–10.40 N) and adhesiveness (13.79–42.16 mJ) of the samples after 14 days of storage at 6 °C varied depending on the starter culture used. The syneresis of all samples ranged between 29% and 31%, which was lower or close to that of milk-based yogurts. The content of individual sugars in the samples also varied depending on the starter culture used for fermentation. The results suggest that the combination of lactic and propionic fermentation helps in the production of rice-based yogurt-type milk substitutes.     

Application of Co-Culture Technology to Enhance Protease Production by Two Halophilic Bacteria,Marinirhabdus sp. and Marinobacter hydrocarbonoclasticus

Although axenic microbial cultures form the basis of many large successful industrial biotechnologies, the production of single commercial microbial strains for use in large environmental biotechnologies such as wastewater treatment has proved less successful. This study aimed to evaluate the potential of the co-culture of two halophilic bacteria, Marinirhabdus sp. and Marinobacter hydrocarbonoclasticus for enhanced protease activity. The co-culture was significantly more productive than monoculture (1.6–2.0 times more growth), with Marinobacter hydrocarbonoclasticus being predominant (64%). In terms of protease activity, enhanced total activity (1.8–2.4 times) was observed in the co-culture. Importantly, protease activity in the co-culture was found to remain active over a much broader range of environmental conditions (temperature 25 °C to 60 °C, pH 4–12, and 10–30% salinity, respectively). This study confirms that the co-culturing of halophilic bacteria represents an economical approach as it resulted in both increased biomass and protease production, the latter which showed activity over arange of environmental conditions.     

Optimizing Procedures of Ultrasound-Assisted Extraction of Waste Orange Peels by Response Surface Methodology

The simultaneous effects of three continuous factors: solvent concentration (50–100%), treated times (25–85 min), treated temperatures (25–55 °C), and two categorical factors: type of solvents (methanol or ethanol) and ultrasonic frequency (28 kHz or 40 kHz) on ultrasonic-assisted extraction yield from waste orange peels were evaluated and optimized by response surface methodology. Fourier Transform Infrared (FTIR) spectroscopy with a wavelength of 500 cm⁻¹ to 4000 cm⁻¹ was employed to rapidly identify the orange extracts. The significant polynomial regression models on crude extraction, sediments after evaporation, and precipitation yield were established (p < 0.05). Results revealed that solvent concentration affected crude extraction and precipitation yield linearly (p < 0.01). The optimal and practical ultrasound-assisted extraction conditions for increasing the precipitation yield were using 61.42% methanol with 85 min at 55 °C under 40 kHz ultrasonic frequency. The spectra of extracts showed a similar fingerprint of hesperidin.     

Oregano and Thyme Essential Oils Encapsulated in Chitosan Nanoparticles as Effective Antimicrobial Agents against Foodborne Pathogens

The use of natural compounds with biocidal activity to fight the growth of bacteria responsible for foodborne illness is one of the main research challenges in the food sector. This study reports the preparation and physicochemical characterization of chitosan nanoparticles loaded with Thymus capitatus (Th-CNPs) and Origanum vulgare (Or-CNPs) essential oils. The nanosystems were obtained by ionotropic gelation technique with high encapsulation efficiency (80–83%) and loading capacity (26–27%). Nanoparticles showed a spherical shape, bimodal particle size distribution, and good stability (zeta potential values > 40 mV). The treatment of the nanosuspensions at different temperatures (4 and 40 °C) and storage times (7, 15, 21, and 30 days) did not affect their physicochemical parameters and highlights their reservoir ability for essential oils also under stressful conditions. Both Or-CNPs and Th-CNPs exhibited an enhanced bactericidal activity against foodborne pathogens (S. aureus, E. coli, L. monocytogenes) than pure essential oils. These ecofriendly nanosystems could represent a valid alternative to synthetic preservatives and be of interest for health and food safety.     

Production and Structural Diversification of Withanolides by Aeroponic Cultivation of Plants of Solanaceae: Cytotoxic and Other Withanolides from Aeroponically Grown Physalis coztomatl

Withanolides constitute one of the most interesting classes of natural products due to their diversity of structures and biological activities. Our recent studies on withanolides obtained from plants of Solanaceae including Withania somnifera and a number of Physalis species grown under environmentally controlled aeroponic conditions suggested that this technique is a convenient, reproducible, and superior method for their production and structural diversification. Investigation of aeroponically grown Physalis coztomatl afforded 29 withanolides compared to a total of 13 obtained previously from the wild-crafted plant and included 12 new withanolides, physacoztolides I−M (9–13), 15α-acetoxy-28-hydroxyphysachenolide C (14), 28-oxophysachenolide C (15), and 28-hydroxyphysachenolide C (16), 5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (17), 15α-acetoxy-5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (18), 28-hydroxy-5α-chloro-6β-hydroxy-5,6-dihydrophysachenolide D (19), physachenolide A-5-methyl ether (20), and 17 known withanolides 3–5, 8, and 21–33. The structures of 9–20 were elucidated by the analysis of their spectroscopic data and the known withanolides 3–5, 8, and 21–33 were identified by comparison of their spectroscopic data with those reported. Evaluation against a panel of prostate cancer (LNCaP, VCaP, DU-145, and PC-3) and renal carcinoma (ACHN) cell lines, and normal human foreskin fibroblast (WI-38) cells revealed that 8, 13, 15, and 17–19 had potent and selective activity for prostate cancer cell lines. Facile conversion of the 5,6-chlorohydrin 17 to its 5,6-epoxide 8 in cell culture medium used for the bioassay suggested that the cytotoxic activities observed for 17–19 may be due to in situ formation of their corresponding 5β,6β-epoxides, 8, 27, and 28.     

Folate Content and Yolk Color of Hen Eggs from Different Farming Systems

This study aimed to compare folate contents in hen eggs from four different farming systems, namely organic, free range, barn, and cage one. Folate retention during egg boiling was studied as well. The contents of individual folate vitamers were determined using the high-performance liquid chromatography method (HPLC), following trienzyme treatment. Folate content in eggs differed significantly (p < 0.05) due to the rearing system, with the highest mean content determined in the eggs from organic farming (113.8 µg/100 g). According to this study, one egg (60 g) may provide 40–86 µg of folates, which corresponds to 10–22% of the recommended daily intake for adults, 400 µg according to the Nutrition Standards for the Polish Population. The predominant folate form found in egg was 5-methyltetrahydrofolate, which showed considerably greater stability under boiling compared to 10-formylfolic acid present in a lower amount. In most eggs tested, the losses in total folate content did not exceed 15%. The color of yolk of the most folate-abundant organic eggs, had the highest value of lightness (L*) and the lowest value of redness (a*). This, however, does not correspond to consumer preferences of intense golden yolk color.     

Effects of Ornamental Plant Density and Mineral/Plastic Media on the Removal of Domestic Wastewater Pollutants by Home Wetlands Technology

Wastewater treatment (WWT) is a priority around the world; conventional treatments are not widely used in rural areas owing to the high operating and maintenance costs. In Mexico, for instance, only 40% of wastewater is treated. One sustainable option for WWT is through the use of constructed wetlands (CWs) technology, which may remove pollutants using cells filled with porous material and vegetation that works as a natural filter. Knowing the optimal material and density of plants used per square meter in CWs would allow improving their WWT effect. In this study, the effect of material media (plastic/mineral) and plant density on the removal of organic/inorganic pollutants was evaluated. Low (three plants), medium (six plants) and high (nine plants) densities were compared in a surface area of 0.3 m² of ornamental plants (Alpinia purpurata, Canna hybrids and Hedychium coronarium) used in polycultures at the mesocosm level of household wetlands, planted on the two different substrates. Regarding the removal of contaminants, no significant differences were found between substrates (p ≥ 0.05), indicating the use of plastic residues (reusable) is an economical option compared to typical mineral materials. However, differences (p = 0.001) in removal of pollutants were found between different plant densities. For both substrates, the high density planted CWs were able to remove COD in a range of 86–90%, PO₄-P 22–33%, NH₄-N in 84–90%, NO₃-N 25–28% and NO₂-N 38–42%. At medium density, removals of 79–81%, 26–32, 80–82%, 24–26%, and 39–41%, were observed, whereas in CWs with low density, the detected removals were 65–68%, 20–26%, 79–80%, 24–26% and 31–40%, respectively. These results revealed that higher COD and ammonia were removed at high plant density than at medium or low densities. Other pollutants were removed similarly in all plant densities (22–42%), indicating the necessity of hybrid CWs to increase the elimination of PO₄-P, NO₃-N and NO₂-N. Moreover, high density favored 10 to 20% more the removal of pollutants than other plant densities. In addition, in cells with high density of plants and smaller planting distance, the development of new plant shoots was limited. Thus, it is suggested that the appropriate distance for this type of polyculture plants should be from 40 to 50 cm in expansion to real-scale systems in order to take advantage of the harvesting of species in these and allow species of greater foliage, favoring its growth and new shoots with the appropriate distance to compensate, in the short time, the removal of nutrients.     

Properties of Banana (Cavendish spp.) Starch Film Incorporated with Banana Peel Extract and Its Application

The objective of this study was to develop an active banana starch film (BSF) incorporated with banana peel extract. We compared the film’s properties with commercial wrap film (polyvinyl chloride; PVC). Moreover, a comparison of the quality of minced pork wrapped during refrigerated storage (7 days at ±4 °C) was also performed. The BSF with different concentrations of banana peel extract (0, 1, 3, and 5 (%, w/v)) showed low mechanical properties (tensile strength (TS): 4.43–31.20 MPa and elongation at break (EAB): 9.66–15.63%) and water vapor permeability (3.74–11.0 × 10⁻¹⁰ g mm/sm² Pa). The BSF showed low film solubility (26–41%), but excellent barrier properties to UV light. The BSF had a thickness range of 0.030–0.047 mm, and color attributes were: L* = 49.6–51.1, a* = 0.21–0.43, b* = 1.26–1.49. The BSF incorporated with banana peel extracts 5 (%, w/v) showed the highest radical scavenging activity (97.9%) and inhibitory activity of E. coli O157: H7. The BSF showed some properties comparable to the commercial PVC wrap film. Changes in qualities of minced pork were determined for 7 days during storage at ±4 °C. It was found that thiobarbituric acid reactive substances (TBARS) of the sample wrapped with the BSF decreased compared to that wrapped with the PVC. The successful inhibition of lipid oxidation in the minced pork was possible with the BSF. The BSF incorporated with banana peel extract could maintain the quality of minced pork in terms of oxidation retardation.     

Biochemical and Functional Characterization of Kidney Bean Protein Alcalase-Hydrolysates and Their Preservative Action on Stored Chicken Meat

A new preservation approach is presented in this article to prolong the lifetime of raw chicken meat and enhance its quality at 4 °C via coating with highly soluble kidney bean protein hydrolysate. The hydrolysates of the black, red, and white kidney protein (BKH, RKH, and WKH) were obtained after 30 min enzymatic hydrolysis with Alcalase (E/S ratio of 1:100, hydrolysis degree 25–29%). The different phaseolin subunits (8S) appeared in SDS-PAGE in 35–45 kD molecular weight range while vicilin appeared in the molecular weight range of 55–75 kD. The kidney bean protein hydrolysates have considerable antioxidant activity as evidenced by the DPPH-scavenging activity and β-carotine-linolenic assay, as well as antimicrobial activity evaluated by disc diffusion assay. BKH followed by RKH (800 µg/mL) significantly (p ≤ 0.05) scavenged 95, 91% of DPPH and inhibited 82–88% of linoleic oxidation. The three studied hydrolysates significantly inhibited the growth of bacteria, yeast, and fungi, where BKH was the most performing. Kidney bean protein hydrolysates could shield the chicken meat because of their amphoteric nature and many functional properties (water and oil-absorbing capacity and foaming stability). The quality of chicken meat was assessed by tracing the fluctuations in the chemical parameters (pH, met-myoglobin, lipid oxidation, and TVBN), bacterial load (total bacterial count, and psychrophilic count), color parameters and sensorial traits during cold preservation (4 °C). The hydrolysates (800 µg/g) significantly p ≤ 0.05 reduced the increment in meat pH and TVBN values, inhibited 59–70% of lipid oxidation as compared to control during 30 days of cold storage via eliminating 50% of bacterial load and maintained secured storage for 30 days. RKH and WKH significantly (p ≤ 0.05) enhanced L*, a* values, thus augmented the meat whiteness and redness, while, BKH increased b* values, declining all color parameters during meat storage. RKH and WKH (800 µg/g) (p ≤ 0.05) maintained 50–71% and 69–75% of meat color and odor, respectively, increased the meat juiciness after 30 days of cold storage. BKH, RKH and WKH can be safely incorporated into novel foods.     

Hydrophobic Chitosan Nanoparticles Loaded with Carvacrol against Pseudomonas aeruginosa Biofilms

Pseudomonas aeruginosa infections have become more challenging to treat and eradicate due to their ability to form biofilms. This study aimed to produce hydrophobic nanoparticles by grafting 11-carbon and three-carbon alkyl chains to a chitosan polymer as a platform to carry and deliver carvacrol for improving its antibacterial and antibiofilm properties. Carvacrol–chitosan nanoparticles showed ζ potential values of 10.5–14.4 mV, a size of 140.3–166.6 nm, and an encapsulation efficiency of 25.1–68.8%. Hydrophobic nanoparticles reduced 46–53% of the biomass and viable cells (7–25%) within P. aeruginosa biofilms. Diffusion of nanoparticles through the bacterial biofilm showed a higher penetration of nanoparticles created with 11-carbon chain chitosan than those formulated with unmodified chitosan. The interaction of nanoparticles with a 50:50 w/w phospholipid mixture at the air–water interface was studied, and values suggested that viscoelasticity and fluidity properties were modified. The modified nanoparticles significantly reduced viable P. aeruginosa in biofilms (0.078–2.0 log CFU·cm⁻²) and swarming motility (40–60%). Furthermore, the formulated nanoparticles reduced the quorum sensing in Chromobacterium violaceum. This study revealed that modifying the chitosan polarity to synthesize more hydrophobic nanoparticles could be an effective treatment against P. aeruginosa biofilms to decrease its virulence and pathogenicity, mainly by increasing their ability to interact with the membrane phospholipids and penetrate preformed biofilms.     

Polyphenolic Profile of Callistemon viminalis Aerial Parts: Antioxidant,Anticancer and In Silico 5-LOX Inhibitory Evaluations

Five new compounds viz kaempferol 3-O-(4″-galloyl)-β-d-glucopyranosyl-(1‴→6″)-O-β-d-glucopyranoside (1), kaempferol 3-O-β-d-mannuronopyranoside (2), kaempferol 3-O-β-d-mannopyranoside (3), quercetin 3-O-β-d-mannuronopyranoside (4), 2, 3 (S)- hexahydroxydiphenoyl]-d-glucose (5) along with fifteen known compounds were isolated from 80% aqueous methanol extract (AME) of C. viminalis. AME and compounds exerted similar or better antioxidant activity to ascorbic acid using DPPH, O₂⁻, and NO inhibition methods. In addition, compounds 16, 4, and 7 showed cytotoxic activity against MCF-7 cell lines while 3, 7 and 16 exhibited strong activity against HepG2. An in silico analysis using molecular docking for polyphenolic compounds 2, 3, 7, 16 and 17 against human stable 5-LOX was performed and compared to that of ascorbic acid and quercetin. The binding mode as well as the enzyme-inhibitor interactions were evaluated. All compounds occupied the 5-LOX active site and showed binding affinity greater than ascorbic acid or quercetin. The data herein suggest that AME, a source of polyphenols, could be used against oxidative-stress-related disorders.     

Bis[pyrrolyl Ru(ii)] triads: a new class of photosensitizers for metal–organic photodynamic therapy

A new family of ten dinuclear Ru(ii) complexes based on the bis[pyrrolyl Ru(ii)] triad scaffold, where two Ru(bpy)₂ centers are separated by a variety of organic linkers, was prepared to evaluate the influence of the organic chromophore on the spectroscopic and in vitro photodynamic therapy (PDT) properties of the compounds. The bis[pyrrolyl Ru(ii)] triads absorbed strongly throughout the visible region, with several members having molar extinction coefficients (ε) ≥ 10⁴ at 600–620 nm and longer. Phosphorescence quantum yields (Φ_p) were generally less than 0.1% and in some cases undetectable. The singlet oxygen quantum yields (Φ_Δ) ranged from 5% to 77% and generally correlated with their photocytotoxicities toward human leukemia (HL-60) cells regardless of the wavelength of light used. Dark cytotoxicities varied ten-fold, with EC₅₀ values in the range of 10–100 μM and phototherapeutic indices (PIs) as large as 5400 and 260 with broadband visible (28 J cm^–2, 7.8 mW cm^–2) and 625 nm red (100 J cm^–2, 42 mW cm^–2) light, respectively. The bis[pyrrolyl Ru(ii)] triad with a pyrenyl linker (5h) was especially potent, with an EC₅₀ value of 1 nM and PI > 27 000 with visible light and subnanomolar activity with 625 nm light (100 J cm^–2, 28 mW cm^–2). The lead compound 5h was also tested in a tumor spheroid assay using the HL60 cell line and exhibited greater photocytotoxicity in this more resistant model (EC₅₀ = 60 nM and PI > 1200 with 625 nm light) despite a lower dark cytotoxicity. The in vitro PDT effects of 5h extended to bacteria, where submicromolar EC₅₀ values and PIs >300 against S. mutans and S. aureus were obtained with visible light. This activity was attenuated with 625 nm red light, but PIs were still near 50. The ligand-localized ³ππ* state contributed by the pyrenyl linker of 5h likely plays a key role in its phototoxic effects toward cancer cells and bacteria.     

Confirmatory Analysis of Per and Polyfluoroalkyl Substances in Milk and Infant Formula Using UHPLC–MS/MS

An ultra-high performance liquid chromatography tandem mass spectrometry method was developed and validated for the sensitive determination and unambiguous confirmation of residues of per and polyfluorinated alkyl substances (PFAS) in breastmilk, retail milk and infant formulas following two sample preparation methods. Sample pre-treatment was carried out by a simplified QuEChERS method without requiring dSPE or any further clean-up. The method was validated in accordance with the requirements of Commission Decision 657/2002/EC with slight modifications. The method displayed good linearity with R² ranging from 0.9843–0.9998 for all target PFAS. The recovery and within-laboratory reproducibility of the method (n = 63) were in the range 60–121% and 5–28%, respectively. The decision limit, detection capability and limit of quantitation ranged from 30–60 ng kg⁻¹ to 40–100 ng kg⁻¹ and 5–50 ng kg⁻¹, respectively. Acceptable matrix effect values in the range −45–29% were obtained with uncertainty of measurement lower than 25% for all target PFAS. The method displays its suitability for the sensitive and high-throughput confirmatory analysis of C₄–C₁₄ PFAS in breastmilk, dairy milk and infant formulas.     

Subcritical Extracts from Major Species of Oil-Bearing Roses—A Comparative Chemical Profiling

A comprehensive chemical profiling of 1,1,1,2-tetrafluoroethane (freon R134a) subcritical extracts from the main genotypes of oil-bearing roses, was performed by gas chromatography–mass spectrometry (GC/MS) and gas chromatography with flame ionization detection (GC-FID) in order to reveal the differences in their chemical composition. One hundred and three individual compounds were identified using GC/MS and their quantitative content was determined using GC-FID, representing 89.8, 92.5, 89.7 and 93.7% of the total content of Rosa gallica L., Rosa damascena Mill., Rosa alba L. and Rosa centifolia L. extracts, respectively. The compounds found in the extracts are representatives of the following main chemical classes: mono-, sesqui- and triterpenoids, phenylethanoids and phenylpropanoids and aliphatic hydrocarbons. Fatty acids, esters and waxes were found, as well. The study revealed that 2-phenylethanol is the most abundant component, ranging 9.0–60.9% followed by nonadecane and nonadecene with 5.1–18.0% geraniol (2.9–14.4%), heneicosane (3.1–11.8%), tricosane (0.1–8.6%), nerol (1.3–6.1%) and citronellol (1.7–5.3%). The extracts demonstrate a specific chemical profile, depending on the botanical species—phenylethanoids and phenyl propanoids are the main group for R. damascena, aliphatic hydrocarbons for R. alba and R. centifolia, while both are found in almost equal amounts in R. gallica. The terpenoid compounds show relatively broad variations: monoterpenes—11.9–25.5% with maximum in R. centifolia; sesquiterpenes—0.6–7.0% with maximum in R. gallica and triterpenes—0.4–3.7% with maximum in R. gallica extract.     

Effect of Soil Type and Application of Ecological Fertilizer Composed of Ash from Biomass Combustion on Selected Physicochemical,Thermal, and Rheological Properties of Potato Starch

The aim of the study was to assess the effect of soil type and the application of fertilizer composed of ashes from biomass combustion to potatoes on selected physicochemical, rheological, and thermal properties of potato starches isolated by using the laboratory method. Potatoes were grown in Haplic Luvisol (HL) and Gleyic Chernozem (GC) soil and fertilized with different doses of biomass combustion ash (D1–D6) with different mineral contents. The thermodynamic characteristics of gelatinization and retrogradation were identified by DSC. The analyses of rheological properties included the determination of the gelatinization characteristics by using the RVA method, flow curves, and assessment of the viscoelastic properties of starch gels. It was found that the starches tested contained from 24.7 to 29.7 g/100 g d.m. amylose, and the clarity of 1% starch pastes ranged from 59% to 68%. The gelatinization characteristics that were determined showed statistically significant differences between the starches analyzed in terms of the tested factors. The value of maximum viscosity and final viscosity varied, respectively, in the range of 2017–2404 mPa·s and 2811–3112 mPa·s, respectively. The samples of the potato starches studied showed a non-Newtonian flow, shear thinning, and the phenomenon of thixotropy. After cooling, the starch gels showed different viscoelastic properties, all of which were weak gels (tan δ = G″/G′ > 0.1).     

Simultaneous Determination of Tetracyclines and Fluoroquinolones in Poultry Eggs by UPLC Integrated with Dual-Channel-Fluorescence Detection Method

An innovative, rapid and stable method for simultaneous determination of three tetracycline (oxytetracycline, tetracycline and doxycycline) and two fluoroquinolone (ciprofloxacin and enrofloxacin) residues in poultry eggs by ultra-high performance liquid chromatography–fluorescence detection (UPLC-FLD) was established and optimized. The samples were homogenized and extracted with acetonitrile/ultrapure water (90:10, v/v) and then purified by solid-phase extraction (SPE). LC separation was achieved on an ACQUITY UPLC BEH C18 column (1.7 µm, 2.1 mm × 100 mm), and the mobile phase was composed of acetonitrile and a 0.1 mol/L malonic acid solution containing 50 mmol/L magnesium chloride (the pH was adjusted to 5.5 with ammonia). When the five target drugs were spiked at the limit of quantification, 0.5 times the maximum residue limit (MRL), 1.0 MRL and 2.0 MRL, the recoveries were above 83.5% and the precision ranged from 1.99% to 6.24%. These figures of merit complied with the parameter validation regulations of the EU and U.S. FDA. The limits of detection and quantifications of the targets were 0.1–13.4 µg/kg and 0.3–40.1 µg/kg, respectively. The proposed method was easily extended to quantitative analyses of target drug residues in 85 egg samples, thus demonstrating its reliability and applicability.     

Anti-Pulmonary Fibrosis Activities of Triterpenoids from Oenothera biennis

Five new triterpenoids, oenotheralanosterols C-G (1–5), with seven known triterpenoidcompounds, namely 2α,3α,19α-trihydroxy-24-norurs4,12-dien-28-oic acid (6), 3β,23-dihydroxy-1-oxo-olean-12-en-28-oic acid (7), remangilone C (8), knoxivalic acid A (9), termichebulolide (10), rosasecotriterpene A (11), androsanortriterpene C (12), were extracted and separated from the dichloromethane part of Oenothera biennis L. The anti-pulmonary fibrosis activities of all the compounds against TGF-β1-induced damage tonormal human lung epithelial (BEAS-2B) cells were investigated in vitro. The results showed that compounds 1–2, 6, 8, and 11 exhibited significant anti-pulmonary fibrosis activities, with EC₅₀ values ranging from 4.7 μM to 9.9 μM.