Simultaneous determination of residues of thiamethoxam and its metabolite clothianidin in tobacco leaf and soil using liquid chromatography‐tandem mass spectrometry

A simple analytical method was developed to simultaneously determine thiamethoxam and its metabolite, clothianidin, in fresh tobacco leaf, soil and cured tobacco leaf using liquid chromatography with tandem mass spectrometry. Thiamethoxam and clothianidin in tobacco and soil samples were extracted with acetonitrile containing 0.1% formic acid and purified using an NH₂‐SPE column. The optimized method provided good linearity with coefficients of determination R² ≥ 0.9981. The limits of detection and quantification were between 0.006–0.12 and 0.02–0.4 mg/kg, respectively. Intra‐ and inter‐day recovery assays were used to validate the established method. The average recoveries of thiamethoxam and clothianidin in fresh tobacco leaf, soil and cured tobacco leaf were 75.04–100.47%, 75.86–86.40% and 89.83–99.39%, respectively. The intra‐ and inter‐day relative standard deviations were all <9%. The developed method was successfully applied for the analysis of thiamethoxam and clothianidin residues in actual tobacco and soil samples. The results indicated that the established method met the requirements for the analysis of trace amounts of thiamethoxam and clothianidin in fresh tobacco leaf, soil and cured tobacco leaf.     

Simultaneous determination of thiamethoxam and its metabolite clothianidin by LC-MS/MS in goji berry and soil

In this study, an effective analytical method for simultaneous determination of thiamethoxam and its metabolite clothianidin in goji berry and soil was developed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The recoveries of the compounds in goji berry and soil at the levels of 0.005, 0.02, and 0.1 μg kg^?1 were 84.7–98.9% and the relative standard deviations (RSDs) were 0.9–3.2%. The limits of detection (LOD) for both compounds in goji berry and soil matrices were 0.001 mg kg^?1; the limits of quantification (LOQ) were 0.005 mg kg^?1 for both compounds in two matrices. The dissipation and final residual experiments in 2016 with the commercial formulation of dinotefuran ? thiamethoxam 30% suspension concentrate (SC) was conducted in goji berries in northwest China (Qinghai, Gansu, Inner Mongolia, and Ningxia). Thiamethoxam was dissipated fast in goji plant ecosystem with half-lives were 1.08–1.01 and 2.04–4.25 days in goji berry and soil. The final residues of thiamethoxam were <0.005–0.382 and <0.005–1.120 mg kg^?1 in goji berry and soil, respectively.     

Determination of Neonicotinoid Pesticides in Propolis with Liquid Chromatography Coupled to Tandem Mass Spectrometry

In this study, a method was developed for the determination of five neonicotinoid pesticides (acetamiprid, clothianidin, imidacloprid, thiacloprid, and thiamethoxam) in propolis. Two sample preparation methods were tested: solid-phase extraction and the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method. The identities of analytes were confirmed using liquid chromatography–tandem mass spectrometry (LC-MS/MS) in the selected reaction monitoring mode. Solid-phase extraction resulted in cleaner extracts; therefore, the SPE-LC-MS/MS method was validated according to the SANTE protocol in triplicate at two spiking levels (10 ng/g and 50 ng/g). The average recoveries of analytes ranged from 61% to 101%, except for clothianidin (10–20%). The LOD ranged from 0.2 ng/g to 4.4 ng/g, whereas the LOQ was in the range of 0.8 ng/g–14.7 ng/g. In order to compensate for the matrix effect, matrix-matched calibration was used. Good accuracy (relative error: 1.9–10.4%) and good linearity (R² > 0.991) were obtained for all compounds. The optimised method was applied to 30 samples: 18 raw propolis and 12 ethanol tinctures. Acetamiprid, imidacloprid, and thiacloprid were detectable in seven samples but were still below the LOQ. This study is the first to report the determination of several neonicotinoid residues in propolis.     

An Electrochemical Sensor Based on Electropolymerization of ß‐Cyclodextrin and Reduced Graphene Oxide on a Glassy Carbon Electrode for Determination of Neonicotinoids

An electrochemical sensor of glassy carbon electrode modified with reduced graphene oxide and β‐cyclodextrin (GCE/rGO/β‐CD) was developed as an effective alternative in the determination of neonicotinoid insecticides, imidacloprid, clothianidin and thiamethoxam, in honey samples. The peak current variation obtained with the proposed sensor was higher compared to the bare GCE in all the analytes. In the determination of imidacloprid the response increased by 1300 %, clothianidin by 670 % and thiametoxam by 630 %. In addition, the optimization of the experimental conditions provided the construction of a sensor with greater sensitivity. The study of interferers showed that inorganic ions (Ca²⁺, Mg²⁺, Fe²⁺, K⁺, Na⁺, e NH₄⁺) and other insecticides (acetamiprid and dinotefuran) did not influence the reduction of imidacloprid, clothianidin and thiamethoxam. The determination of imidacloprid, clothianidin and thiamethoxam in honey samples exhibited recovery values within the EPA range (between 107.75 and 116 %). In conclusion, the developed sensor GCE/rGO/β‐CD proved to be an effective alternative in the determination of neonicotinoid insecticides in honey samples.     

Risk Assessment of Triflumezopyrim and Imidacloprid in Rice through an Evaluation of Residual Data

Triflumezopyrim, a novel mesoionic insecticide used to control planthoppers, is a potential substitute for imidacloprid. In this study, triflumezopyrim and imidacloprid residues in rice were determined using a quick, easy, cheap, effective, rugged, and safe procedure combined with ultra-high-performance liquid chromatography–tandem mass spectrometry. The limit of quantification of both triflumezopyrim and imidacloprid was 0.01 mg kg⁻¹, and the average recovery values were 94–104% and 91–106%, with relative standard deviations (RSDs) of 1.1–1.4% and 2.1–3.4% (n = 5), respectively. The consumer protection level was assessed by calculating the theoretical maximum daily intake using the reported maximum residue limits of triflumezopyrim and imidacloprid. The established method was successfully applied to 200 commercial rice samples collected from four provinces in China, and their potential public health risks were assessed using triflumezopyrim and imidacloprid residues. The risk associated with triflumezopyrim and imidacloprid dietary intake was assessed by calculating the national estimated short-term intake and the acute reference dose percentage (%ARfD). The results show that the theoretical maximum daily intake (NEDI) values of triflumezopyrim and imidacloprid in different age and gender groups were 0.219–0.543 and 0.377–0.935 μg kg⁻¹ d⁻¹ bw, and the risk quotient (RQ) values were 0.188–0.467% and 0.365–0.906%, respectively. The acute reference dose (%ARfD) of triflumezopyrim and imidaclopridin ranged from 0.615 to 0.998% and from 0.481 to 0.780%, respectively.     

Determination of Methylene Blue and Its Metabolite Residues in Aquatic Products by High-Performance Liquid Chromatography–Tandem Mass Spectrometry

A sensitive and reliable method was developed to determine methylene blue (MB) and its metabolite residues, including azure A (AZA), azure B (AZB), and azure C (AZC) in aquatic products by HPLC–MS/MS. The samples were extracted by acetonitrile and cleaned up by alumina-neutral (ALN) cartridges. The analytes were separated on a Sunfire C18 column (150 mm × 2.1 mm, 5 µm). The method was validated according to the European criteria of Commission Decision 2002/657/CE. Good linearity between 1–500 µg/L was obtained with correlation coefficients (R²) greater than 0.99. The limit of quantification (LOQ) was 1.0 µg/kg. The average recoveries at three levels of each compound (1, 5, and 10 µg/kg) were demonstrated to be in the range of 71.8–97.5%, with relative standard deviations (RSDs) from 1.05% to 8.63%. This method was suitable for the detection of methylene blue and its metabolite residues in aquatic products.     

Degradation of Neonicotinoids and Caffeine from Surface Water by Photolysis

Along with rapid social development, the use of insecticides and caffeine-containing products increases, a trend that is also reflected in the composition of surface waters. This study is focused on the phototreatment of a surface water containing three neonicotinoids (imidacloprid, thiamethoxam, and clothianidin) and caffeine. Firstly, the radiation absorption of the target pollutants and the effect of the water matrix components were evaluated. It was observed that the maximum absorption peaks appear at wavelengths ranging from 246 to 274 nm, and that the water matrix did not affect the efficiency of the removal of the target pollutants. It was found that the insecticides were efficiently removed after a very short exposure to UV irradiation, while the addition of hydrogen peroxide was needed for an efficient caffeine depletion. The electrical energy per order was estimated, being the lowest energy required (9.5 kWh m⁻³ order⁻¹) for the depletion of thiamethoxan by indirect photolysis, and a concentration of hydrogen peroxide of 5 mg dm⁻³. Finally, a preliminary evaluation on the formation of by-products reveals that these compounds play a key role in the evolution of the ecotoxicity of the samples, and that the application of direct photolysis reduces the concentration of these intermediates.     

Development and Validation of an HPLC-UV Method for the Quantification of 4′-Hydroxydiclofenac Using Salicylic Acid: Future Applications for Measurement of In Vitro Drug–Drug Interaction in Rat Liver Microsomes

Salicylic acid is a key compound in nonsteroidal anti-inflammatory drugs that has been recently used for preventing the risk of hospitalization and death among COVID-19 patients and in preventing colorectal cancer (CRC) by suppressing two key proteins. Understanding drug–drug interaction pathways prevent the occurrence of adverse drug reactions in clinical trials. Drug–drug interactions can result in the variation of the pharmacodynamics and pharmacokinetic of the drug. Inhibition of the Cytochrome P450 enzyme activity leads to the withdrawal of the drug from the market. The aim of this paper was to develop and validate an HPLC-UV method for the quantification of 4′-hydroxydiclofenac as a CYP2C9 metabolite using salicylic acid as an inhibitor in rat liver microsomes. A CYP2C9 assay was developed and validated on the reversed phase C₁₈ column (SUPELCO 25 cm × 4.6 mm × 5 µm) using a low-pressure gradient elution programming at T = 30 °C, a wavelength of 282 nm, and a flow rate of 1 mL/min. 4′-hydroxydiclofenac demonstrated a good linearity (R² > 0.99), good reproducibility, low detection, and quantitation limit, and the inter and intra-day precision met the ICH guidelines (<15%). 4′-hydroxydiclofenac was stable for three days and showed an acceptable accuracy and recovery (80–120%) within the ICH guidelines in a rat liver microsome sample. This method will be beneficial for future applications of the in vitro inhibitory effect of salicylic acid on the CYP2C9 enzyme activity in rat microsomes and the in vivo administration of salicylic acid in clinical trials.     

Dissipation behavior,residue distribution and dietary risk assessment of chlorfenapyr and clothianidin in leek using RRLC-QqQ-MS/MS technique

Commercial suspension emulsion (SE) of (8% chlorfenapyr + 20% clothianidin), as a pre-registered product in China, was firstly investigated under Chinese open-field conditions. A MWCNTs-based QuEChERS method for simultaneous determination of chlorfenapyr and clothianidin in leek was established and validated through RRLC-QqQ-MS/MS.     

Liquid chromatography–tandem mass spectrometry analysis of neonicotinoid pesticides and 6-chloronicotinic acid in environmental water with direct aqueous injection

An efficient, high throughput and cost-effective direct aqueous injection approach for the analysis of neonicotinoid pesticides and a common metabolite in environmental water has been described here. The method determines eight neonicotinoid pesticides (acetamiprid, clothianidin, dinotefuran, flonicamid, imidacloprid, nitenpyram, thiacloprid, thiamethoxam) and 6-chloronicotinic acid (a common metabolite of the first generation neonicotinoids, acetamiprid, imidacloprid, nitenpyram and thiacloprid) without any sample enrichment/cleanup steps. The method detection limits are 2–8 ng/L for the neonicotinoids and 93 ng/L for 6-chloronicotinic acid. The performance of the QTRAP^®5500 mass spectrometer was compared against a 4000QTRAP^®, and a QTRAP^®6500, to provide insights for future method transfer among different generations of instrumentations. Critical mass spectrometric parameters such as collision energy were quite consistent among the three instruments evaluated. However, increased chemical background levels for some target compounds on the more sensitive instruments were observed. The application of differential ion mobility spectrometry combined with tandem mass spectrometry was demonstrated to have great potential in reducing chemical background and/or isobaric interferences inherited in sample matrices. This ISO 17025 accredited method was employed to quantitate neonicotinoids in Ontario stream water samples. Good correlation for analytical results of this direct aqueous injection approach and a previously published solid phase extraction approach warrant high confidence in data quality.     

Residue and Risk Assessment of Fluopyram in Carrot Tissues

This study describes the variation in residue behavior of fluopyram in soil, carrot root, and carrot leaf samples after the application of fluopyram (41.7% suspension, Bayer) by foliar spray or root irrigation at the standard of 250.00 g active ingredient per hectare (a.i./ha) and double-dose treatment (500.00 g a.i./ha). Fluopyram and its metabolite fluopyram-benzamide were extracted and cleaned up using the QuEChERS method and subsequently quantified with LC-QQQ-MS/MS. The LOD and LOQ of the developed method were in the range of 0.05–2.65 ug/kg and 0.16–8.82 ug/kg, respectively. After root irrigation, the final residues detected in edible parts were 0.60 and 1.80 mg/kg, respectively, when 250.00 and 500.00 g a.i./ha were applied, which is much higher than the maximum residue limit in China (0.40 mg/kg). In contrast, after spray application, most of the fluopyram dissipated from the surface of carrot leaves, and the final residues in carrot roots were both only 0.05 mg/kg. Dietary risk assessments revealed a 23–40% risk quotient for the root irrigation method, which was higher than that for the foliar spray method (8–14%). This is the first report comparing the residue behavior of fluopyram applied by root irrigation and foliar spray. This study demonstrates the difference in risk associated with the two application methods and can serve as a reference for the safe application of fluopyram.     

Determination of Polycyclic Aromatic Hydrocarbons in Traditional Chinese Medicine Raw Material,Extracts, and Health Food Products

The four polycyclic aromatic hydrocarbon markers (PAH4) of benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), and benzo[a]pyrene (BaP) are indicators showing polycyclic aromatic hydrocarbon (PAH) contamination levels in Chinese medicine raw materials (CMRMs), extracts and health food products; Samples of herbal medicine, herbal extracts, and food supplements were extracted with n-hexane, then cleaned up sequentially on Florisil and EUPAH solid-phase extraction (SPE) columns. A gas chromatography–mass spectrometry method for the determination of four polycyclic aromatic hydrocarbon markers in Chinese medicine raw material, extracts, and health food products was established; In spiked-recovery experiments, the average recovery was about 78.6–107.6% with a precision of 2.3–10.5%. The limit of quantification (LOQ) and limit of detection (LOD) of the PAH4 markers in this method were 2.0 μg/kg and 0.7 μg/kg, respectively. When the developed method was utilized to determine PAH4 contents in 12 locally available health food products, 3 samples contained over 10.0 μg/kg BaP, and 5 samples contained over 50.0 μg/kg PAH4. The European Union (EU) limits for BaP and PAH4 are 10 and 50.0 μg/kg, respectively; therefore, more attention must be drawn to the exposure risk of BaP and PAH4 in CMRMs, their extracts, and health food products. According to the risk assessment based on the Margin of Exposure (MOE) method, it is recognized that the products mentioned in this study pose a low risk.     

Properties of Banana (Cavendish spp.) Starch Film Incorporated with Banana Peel Extract and Its Application

The objective of this study was to develop an active banana starch film (BSF) incorporated with banana peel extract. We compared the film’s properties with commercial wrap film (polyvinyl chloride; PVC). Moreover, a comparison of the quality of minced pork wrapped during refrigerated storage (7 days at ±4 °C) was also performed. The BSF with different concentrations of banana peel extract (0, 1, 3, and 5 (%, w/v)) showed low mechanical properties (tensile strength (TS): 4.43–31.20 MPa and elongation at break (EAB): 9.66–15.63%) and water vapor permeability (3.74–11.0 × 10⁻¹⁰ g mm/sm² Pa). The BSF showed low film solubility (26–41%), but excellent barrier properties to UV light. The BSF had a thickness range of 0.030–0.047 mm, and color attributes were: L* = 49.6–51.1, a* = 0.21–0.43, b* = 1.26–1.49. The BSF incorporated with banana peel extracts 5 (%, w/v) showed the highest radical scavenging activity (97.9%) and inhibitory activity of E. coli O157: H7. The BSF showed some properties comparable to the commercial PVC wrap film. Changes in qualities of minced pork were determined for 7 days during storage at ±4 °C. It was found that thiobarbituric acid reactive substances (TBARS) of the sample wrapped with the BSF decreased compared to that wrapped with the PVC. The successful inhibition of lipid oxidation in the minced pork was possible with the BSF. The BSF incorporated with banana peel extract could maintain the quality of minced pork in terms of oxidation retardation.     

Online In-Tube Solid-Phase Microextraction Coupled with Liquid Chromatography–Tandem Mass Spectrometry for Automated Analysis of Four Sulfated Steroid Metabolites in Saliva Samples

Accurate measurement of sulfated steroid metabolite concentrations can not only enable the elucidation of the mechanisms regulating steroid metabolism, but also lead to the diagnosis of various related diseases. The present study describes a simple and sensitive method for the simultaneous determination of four sulfated steroid metabolites in saliva, pregnenolone sulfate (PREGS), dehydroepiandrosterone sulfate (DHEAS), cortisol sulfate (CRTS), and 17β-estradiol-3-sulfate (E2S), by online coupling of in-tube solid-phase microextraction (IT-SPME) and stable isotope dilution liquid chromatography–tandem mass spectrometry (LC–MS/MS). These compounds were extracted and concentrated on Supel-Q PLOT capillary tubes by IT-SPME and separated and detected within 6 min by LC–MS/MS using an InertSustain swift C18 column and negative ion mode multiple reaction monitoring systems. These operations were fully automated by an online program. Calibration curves using their stable isotope-labeled internal standards showed good linearity in the range of 0.01–2 ng mL⁻¹ for PREGS, DHEAS, and CRTS and of 0.05–10 ng mL⁻¹ for E2S. The limits of detection (S/N = 3) of PREGS, DHEAS, CRTS, and E2S were 0.59, 0.30, 0.80, and 3.20 pg mL⁻¹, respectively. Moreover, intraday and interday variations were lower than 11.1% (n = 5). The recoveries of these compounds from saliva samples were in the range of 86.6–112.9%. The developed method is highly sensitive and specific and can easily measure sulfated steroid metabolite concentrations in 50 μL saliva samples.     

Simultaneous Determination of Seven Pesticides and Metabolite Residues in Litchi and Longan through High-Performance Liquid Chromatography-Tandem Mass Spectrometry with Modified QuEChERS

This study established a QuEChERS high-performance liquid chromatography/tandem triple-quadrupole mass spectrometry method for determining azoxystrobin, pyraclostrobin, picoxystrobin, difenoconazole, chlorantraniliprole, imidacloprid, and cyantraniliprole and its metabolite (IN-J9Z38) in litchi and longan, and applied this method to the real samples. The residues in samples were extracted with acetonitrile and purified with nano-ZrO₂, C₁₈, and PSA. The samples were then detected with multireactive ion monitoring and electrospray ionization in the positive ion mode and quantified using the external matrix-matched standard method. The results showed good linearities for the eight analytes in the range of 1–100 μg/L, with correlation coefficients (r²) of >0.99. The limit of quantification was 1–10 μg/kg, and the limit of detection was 0.3–3 μg/kg. Average recovery from litchi and longan was 81–99%, with the relative standard deviation of 3.5–8.4% at fortified concentrations of 1, 10, and 100 μg/kg. The developed method is simple, rapid, efficient, and sensitive. It allowed the rapid screening, monitoring, and confirming of the aforementioned seven pesticides and a metabolite in litchi and longan.     

Standardized Pomegranate (Pomella®) and Red Maple (Maplifa®) Extracts and Their Phenolics Protect Type I Collagen by the Inhibition of Matrix Metalloproteinases,Collagenase, and Collagen Cross-Linking

Phenolics enriched pomegranate fruit (Pomella^®) and red maple leaf (Maplifa^®) extracts and their major phenolic constituents have demonstrated beneficial skin effects through the protection of human skin keratinocytes from oxidative-stress-induced damage. However, their mechanisms of protection of cutaneous collagen are still unclear. Herein, the collagen protective effects of Pomella^® and Maplifa^®, and their major bioactive phytochemicals, namely, punicalagin (PA) and ginnalin A (GA), respectively, were evaluated using enzymatic assays including collagenase, anti-glycation and cell-based models as well as computational methods. The importance of the modulatory effects was validated at the protein level for type I collagen and matrix metalloproteinases (MMPs) using human-skin-derived keratinocytes. The synergistic collagenase inhibitory effects upon combinations of Pomella^® + Maplifa^® and PA + GA at a combination ratio of 1:2 and 1:1, respectively, were evaluated using their combination index (CI; a well-established assessment of synergism). Pomella^® (50–400 µg/mL), Maplifa^® (100–800 µg/mL), PA (50–400 µM), and GA (50–400 µM) dose-dependently inhibited collagenase activity by 26.3–86.3%, 25.7–94.0%, 26.2–94.0%, and 12.0–98.0%, respectively. The CI of the anti-collagenase activity of Pomella^® and Maplifa^® ranged from 0.53–0.90, while that of PA and GA (12.5/12.5 and 25/25 µM) ranged from 0.66 and 0.69, respectively, suggesting a synergistic inhibitory effect. Interestingly, in the cell-based assays by Western blotting, Pomella^® and Maplifa^® reduced the protein expression levels of collagen degradation enzymes (MMPs), while simultaneously increasing that of type I collagen in epidermoid carcinoma A431 cells. This is the first report to show that these extracts exert synergistic collagen protective effects. Taken together, these findings provide molecular insights into the usefulness of Pomella^® and Maplifa^® or their phenolics as bioactive ingredients for skin care products to slow down aging and enhance skin tone.     

Dissipation Kinetics and Safety Evaluation of Flonicamid in Four Various Types of Crops

The chemical insecticide flonicamid is widely used to control aphids on crops. Differences among crops make the universality of detection methods a particularly important consideration. The aim of this study was to establish a universal, sensitive, accurate and efficient method for the determination of flonicamid residues in peach, cucumber, cabbage and cotton. QuEChERS pretreatment was combined with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). A satisfactory recovery rate of 84.3–99.3% was achieved at three spiking levels, and the relative standard deviation (RSD) was 0.41–5.95%. The limit of quantification (LOQ) of flonicamid in the four matrices was 0.01 mg/kg. The residue and dissipation kinetics of flonicamid in four types of crops in various locations were determined by using the optimized method. The results showed that flonicamid had a high dissipation rate in the four different types of crops and a half-life in the different matrices and locations of 2.28–9.74 days. The terminal residue of flonicamid was lower than the maximum residue limit (MRL). The risk quotient (RQ) of flonicamid was 4.4%, which is significantly lower than 100%. This result shows that the dietary risk presented by using flonicamid at the maximum recommended dose is low and acceptable. The comprehensive long-term dietary risk assessment of flonicamid performed in this study provides a reference for the protection of consumer health and safe insecticide use.     

Rapid Differential Pulse Polarographic Determination of Thiamethoxam in Commercial Formulations and some Real Samples

The polarographic behavior of thiamethoxam (a neonicotinoid insecticide) was studied by direct current and differential pulse polarography. Depending on the pH thiamethoxam exhibited one or two well-defined cathodic polarographic waves. The characteristics of the electrode reaction were investigated and it was found that at pH > 5.0 the target molecule captures four electrons in the first step, and two in the second. Based on the reduction behavior of the target molecule on the mercury electrode, a differential pulse polarographic method was elaborated for the rapid determination of thiamethoxam at pH 8.0. With the optimized method, a linear response for thiamethoxam was found in the concentration range of 31.1 − 470 ng cm⁻³, the relative standard deviation did not exceed 1.6%, and the detection and quantitation limits were found to be 9.3 ng cm⁻³ and 31.1 ng cm⁻³, respectively. The method was applied to the determination of thiamethoxam in commercial formulations and real samples (potato and maize). The procedure is simple, fast, sensitive, and compares well with comparative spectrophotometric and chromatographic (HPLC/DAD) methods.     

Method of Glyphosate,AMPA, and Glufosinate Ammonium Determination in Beebread by Liquid Chromatography—Tandem Mass Spectrometry after Molecularly Imprinted Solid-Phase Extraction

The aim of this study was to develop a method for the determination of glyphosate, its metabolite aminomethylphosphonic acid (AMPA), and glufosinate ammonium residues in beebread samples, which could then be used to assess bees’ exposure to their residues. The complexity of beebread’s matrix, combined with the specific properties of glyphosate itself, required careful selection and optimization of each analysis step. The use of molecularly imprinted solid-phase extraction (MIP-SPE) by AFFINIMIP glyphosate as an initial clean-up step significantly eliminated matrix components and ensured an efficient derivatization step. Colorless beebread extracts were derivatized by the addition of 9-fluorenylmethyl chloroformate (FMOC-Cl). After derivatization, in order to remove FMOC-OH and residual borate buffer, a solid-phase extraction (SPE) clean-up step using Oasis HLB was carried out. Instrumental analysis was performed by liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS). The method was validated according to the SANTE/11312/2021 guideline at concentrations of 5, 10, and 100 µg/kg, and satisfactory recovery (trueness) values (76–111%) and precision (RSDr) ≤ 18% were obtained. The limit of quantification (LOQ) was 5 µg/kg for AMPA and glufosinate ammonium and 10 µg/kg for glyphosate. The method was positively verified by the international proficiency test. Analysis of beebread samples showed the method’s usefulness in practice. The developed method could be a reliable tool for the assessment of beebread’s contamination with residues of glyphosate, its metabolite AMPA, and glufosinate ammonium.     

A Capillary Electrophoresis-Based Method for the Measurement of Hydroxychloroquine and Its Active Metabolite Desethyl Hydroxychloroquine in Whole Blood in Patients with Rheumatoid Arthritis

A capillary electrophoresis method was developed to detect and measure hydroxychloroquine (HCQ) and its active metabolite desethyl hydroxychloroquine (DHCQ) in whole blood in patients with rheumatoid arthritis. The best separation in terms of peak area reproducibility, migration time, peak shape, and resolution of adjacent peaks was obtained in a 60 cm, 75 µm i.d. uncoated fused-silica capillary using a background electrolyte mixture of an aqueous 55 mmol/L TRIS solution brought to pH 2.6 with phosphoric acid and methanol (85:15) and a voltage and a temperature of separation of 20 kV and 30 °C, respectively. Analytes were separated in less than 12 min, with excellent linearity (R² ≥ 0.999) in the concentration range of 0.5–8 µmol/L. The recovery of analytes spiked in whole blood was 99–101% for HCQ and 98–99% for DHCQ. Analysis of five samples from patients with rheumatoid arthritis receiving HCQ 400 mg daily yielded mean steady-state concentrations of 2.27 ± 1.61 and 1.54 ± 0.55 μmol/L for HCQ and DHCQ, respectively, with a HCQ to DHCQ ratio of 1.40 ± 0.77.