Phosphoric acid activated carbon as borderline and soft metal ions scavenger

Three activated carbons have been prepared, two from oil-palm shell and one from coconut shell, by the phosphoric acid activation process. Adsorption isotherms of copper(II) were determined to evaluate and compare the performance of experimental carbons. The obtained data are fitted very well to Langmuir and Freundlich adsorption models. All prepared activated carbons show 4–7-fold high adsorption capacity (q_max 19.5–23/18.6–21?mg?g^?1) than that of the commercial ones (q_max 5.6/2.9?mg?g^?1) under the conducted experimental conditions. The mechanism of adsorption was evaluated from the competitive adsorption of copper(II) and calcium(II) in a binary solution depending on their behaviour as Lewis acid and assessed as inner-sphere complexation. The competitive adsorption of copper(II) with other borderline and soft metal ions was evaluated by the best scavenger using a solution of ternary solute of copper(II), nickel(II) and lead(II). The adsorption selectivity order is determined as follows: Pb?>?Cu???Ni.     

Adsorption of acridine yellow G from aqueous solutions using functionalized graphene nanoplatelets/modified polybutadiene hybrid composite

This paper presents an analysis of adsorption of acridine yellow G (AYG) from aqueous solutions through the use of functionalized grapheme nanoplatelets/modified polybutadiene hybrid composite (FGNPs/MPB). The adsorption of AYG onto FGNPs/MPB was investigated based on the AYG concentration, pH, contact time, temperature, and adsorbent dose. A maximum adsorption capacity was obtained at a pH of 7 (23.7 mg/g), an adsorbent dose of 1.0 g/L (20.8 mg/g), and an initial AYG concentration of 28.5 mg/L (16.9 mg/g). The value of q_e of FGNPs/MPB increases with an increase in temperature from 293 to 323 K. Equilibrium isotherm data were analyzed using the Langmuir and Freundlich isotherm models. The Langmuir model best describes the adsorption processes of AYG, which showed that the monolayer adsorption capacity of FGNPs/MBP is 22.9 mg/g. The pseudofirst-order, pseudosecond-order, and intraparticle diffusion models were used to study the kinetics of the AYG adsorption onto FGNPs/MPB. The pseudosecond-order model better described kinetic data for the adsorption of AYG onto FGNPs/MPB. Thermodynamic parameters, such as the Gibbs free energy, enthalpy, and entropy, indicated that the AYG adsorption onto FGNPs/MPB was spontaneous feasible, and endothermic.     

Equilibrium,kinetic and thermodynamic biosorption studies of Hg(II) on red algal biomass of Porphyridium cruentum

Among a variety of microbial materials employed for biosorption, algae have added advantages of non-toxic and autotrophic nature. In this study, biosorption of Hg(II) was studied with red algal biomass of Porphyridium cruentum. The parameters affecting biosorption such as dosage of biosorbent, pH, contact time, initial metal concentration, temperature and effect of foreign metal cations in binary system were evaluated. Kinetic data were described with the help of pseudo-first-order and pseudo-second-order kinetic models. Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherm models were applied to adsorption equilibrium data. According to the results, the maximum removal capacity (q_max) was 2.62?mg/g observed at pH 7 with 0.25?g/L of biosorbent dosage for Hg(II) solution containing 10?mg/L of metal ions. The Langmuir isotherm model fits best to the adsorption data while the kinetic data followed the pseudo-second-order model. Thermodynamics studies showed that the biosorption process of Hg(II) on P. cruentum was exothermic in nature.     

Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith

The adsorptive removal of lead (II) from aqueous medium was carried out by chemically modified silica monolith particles. Porous silica monolith particles were prepared by the sol-gel method and their surface modification was carried out using trimethoxy silyl propyl urea (TSPU) to prepare inorganic–organic hybrid adsorbent. The resultant adsorbent was evaluated for the removal of lead (Pb) from aqueous medium. The effect of pH, adsorbent dose, metal ion concentration and adsorption time was determined. It was found that the optimum conditions for adsorption of lead (Pb) were pH 5, adsorbent dose of 0.4 g/L, Pb(II) ions concentration of 500 mg/L and adsorption time of 1 h. The adsorbent chemically modified SM was characterized by scanning electron microscopy (SEM), BET/BJH and thermo gravimetric analysis (TGA). The percent adsorption of Pb(II) onto chemically modified silica monolith particles was 98%. An isotherm study showed that the adsorption data of Pb(II) onto chemically modified SM was fully fitted with the Freundlich and Langmuir isotherm models. It was found from kinetic study that the adsorption of Pb(II) followed a pseudo second-order model. Moreover, thermodynamic study suggests that the adsorption of Pb(II) is spontaneous and exothermic. The adsorption capacity of chemically modified SM for Pb(II) ions was 792 mg/g which is quite high as compared to the traditional adsorbents. The adsorbent chemically modified SM was regenerated, used again three times for the adsorption of Pb(II) ions and it was found that the adsorption capacity of the regenerated adsorbent was only dropped by 7%. Due to high adsorption capacity chemically modified silica monolith particles could be used as an effective adsorbent for the removal of heavy metals from wastewater.     

Preparation and characterization of nanocomposite,silica aerogel,activated carbon and its adsorption properties for Cd (II) ions from aqueous solution

A novel composite adsorbent, silica aerogel activated carbon was synthesized by sol-gel process at ambient pressure drying method. The composite was characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and Nitrogen adsorption/desorption isotherms (BET).In the present study, the mentioned adsorbent was used moderately for the removal of cadmium ions from aqueous solutions and was compared with two other adsorbents of cadmium, activated carbon and silica aerogel. The experiments of Cd adsorption by adsorbents were performed at different initial ion concentrations, pH of the solution, adsorption temperature, adsorbent dosage and contact time. Moreover, the optimum pH for the adsorption was found to be 6.0 with the corresponding adsorbent dosage level of 0.1 g at 60 °C temperature. Subsequently, the equilibrium was achieved for Cd with 120 min of contact time.Consequently, the results show that using this composite adsorbent could remove more than 60% of Cd under optimum experimental conditions. Langmuir and Freundlich isotherm model was applied to analyze the data, in which the adsorption equilibrium data were correlated well with the Freundlich isotherm model and the equilibrium adsorption capacity (q_e) was found to be 0.384 mg/g in the 3 mg/L solution of cadmium.     

Removal of Lead by Merlinoite Prepared from Sugarcane Bagasse Ash and Kaolin: Synthesis,Isotherm, Kinetic,and Thermodynamic Studies

This study introduces a merlinoite synthesized from sugarcane bagasse ash (SBA) and kaolin and evaluates its application as an adsorbent to remove lead from wastewater. The synthesis was performed via the hydrothermal method, and optimal conditions were determined. The adsorption of Pb by merlinoite was also optimized. Determination of the Pb²⁺ remaining in the aqueous solution was determined by atomic absorption spectroscopy (AAS). Adsorption isotherms were mainly studied using the Langmuir and Freundlich models. The Langmuir model showed the highest consistency for Pb adsorption on merlinoite, yielding a high correlation coefficient (R²) of 0.9997 and a maximum adsorption capacity (q_max) of 322.58 mg/g. The kinetics of the adsorption process were best described by a pseudo-second-order model. Thermodynamic studies carried out at different temperatures established that the adsorption reaction was spontaneous and endothermic. The results of this study show that merlinoite synthesized from kaolinite and SBA is an excellent candidate for utilization as a high-performance adsorbent for lead removal from wastewater.     

Study of Mono- and Bimetallic Fe and Mn Oxide-Supported Clinoptilolite for Improved Pb(II) Removal

A cost-effective, iron- and manganese-oxide-supported clinoptilolite-based rock was prepared. Based on its nanoporous structure, it worked as a nanoreactor, thereby providing enhanced functionalities. The mono- and bimetallic Fe- and Mn-oxide-supported clinoptilolite was thoroughly characterized with thermoanalytical FT-IR, XRD, SEM, and XPS spectroscopy. All the spectral procedures that were used confirmed the occurrence of a new MnO₂ phase (predominantly birnessite), including mostly amorphous iron oxi(hydr)oxide (FeO(OH)) species on the surface of the above-synthesized adsorbents. The synthesized products validated a considerably higher adsorption capacity toward Pb(II) pollutants compared to the natural clinoptilolite. The following order of a(max) toward Pb(II) was found: MnOx-zeolite (202.1 mg/g) > FeO(OH)-MnOx-zeolite (101.3 mg/g) > FeO(OH)-zeolite (80 mg/g) > natural zeolite (54.9 mg/g). The adsorption equilibrium data were analyzed by the two-parameter empirical isotherm models Langmuir, Freundlich, and BET as well as the three-parameter Redlich–Peterson isotherm.     

Biosorption of heavy metals by bacteria isolated from activated sludge

Twelve aerobic bacteria from activated sludge were isolated and identified. These included both Gram-positive (e.g., Bacillus) and Gram-negative (e.g., Pseudomonas) bacteria. The biosorption capacity of these strains for three different heavy metals (copper, nickel, and lead) was determined at pH 5.0 and initial metal concentration of 100 mg/L. Among these 12 isolates, Pseudomonas pseudoalcaligenes was selected for further investigation owing to its high metal biosorption capacity. The lead and copper biosorption of this strain followed the Langmuir isotherm model quite well with maximum biosorption capacity (q _max) reaching 271.7mg of Pb²⁺/g of dry cell and 46.8 mg of Cu²⁺/g of dry cell at pH 5.0. Study of the effect of pH on lead and copper removal indicated that the metal biosorption increased with increasing pH from 2.0 to 7.0. A mutual inhibitory effect was observed in the lead-copper system because the presence of either ion affected the sorption capacity of the other. Unequal inhibitions were observed in all the nickel binary systems. The increasing order of affinity of the three metals toward P. pseudoalcaligenes was Ni<Cu<Pb. The metal biosorptive potential of these isolates, especially P. pseudoalcaligenes, may have possible applications in the removal and recovery of metals from industrial effluents.     

An Efficient Strategy for Enhancing the Adsorption of Antibiotics and Drugs from Aqueous Solutions Using an Effective Limestone-Activated Carbon–Alginate Nanocomposite

Based on the adsorption performance of a porous nanocomposite with limestone (LS), activated carbon (AC) and sodium alginate (SG), a unique, multifunctional LS–AC–SG nanocomposite absorbent was designed and prepared for extracting antibiotics and drugs from aqueous solutions. The composite exhibited the following advantages: quick and simple to prepare, multifunctionality and high efficiency. Amoxicillin (AMX) and diclofenac (DCF) were chosen as the conventional antibiotic and the drug, respectively. The prepared nanocomposite’s physicochemical characteristics were calculated through numerous characterization methods. The structure of the surface was made up of interconnected pores that can easily confine pollutants. The surface area was measured to be 27.85 m²/g through BET analysis. The results show that the maximum absorption capacity of amoxicillin and diclofenac was 99.6% and 98.4%, respectively, at a contact time of 40 min. The maximum removal of amoxicillin and diclofenac was reached at pH = 2. Adsorption analysis revealed that adsorption isotherm and kinetic data matched the pseudo-first-order kinetic and the Langmuir isotherm models. The results imply that the synthesized nanocomposites have the capacity to remove amoxicillin (AMX) and diclofenac (DCF) from aqueous solutions.     

Remediation of lead by pretreated red algae: adsorption isotherm,kinetic, column modeling and simulation studies

Batch and column biosorption experiments were carried on for lead uptake using ecofriendly biosorbents (raw and calcium chloride [CaCl₂] or formaldehyde pretreated form of red marine algae Jania ruben [Linnaeus]). The best-fit (linear and nonlinear) isotherms, kinetics, and column adsorption models were identified using statistical analysis. Freundlich, Langmuir, Temkin, Redlich–Peterson, and Elovich adsorption isotherm models were tested. Highest adsorption capacity (774 mg/g) has been observed with Jania algae pretreated with formaldehyde. Pseudo-first- and second-order adsorption kinetics were applicable. The column capacity for lead removal with Jania pretreated with CaCl₂ was found to be 1089.6 (mg/g) from the breakthrough curve area method. Thomas, Yoon-Nelson, Yan, and Clark column models were tested with regression analysis. Thomas model is the best column model with capacity q_Th = 1092.4 mg/g. Overall, 98.5% regeneration of column was achieved, indicating the suitability of using algae materials in multioperational cycles. Adsorbed lead present in algae material was confirmed by thermal analysis.     

Evaluation of Dry Protonated Calcium Alginate Beads for Biosorption Applications and Studies of Lead Uptake

Alginate polysaccharide is a promising biosorbent for metal uptake. Dry protonated calcium alginate beads for biosorption applications were prepared, briefly characterized and tested for lead uptake. Several advantages of this biosorbent are reported and discussed in comparison with other alginate-based sorbents. The alginate beads contained 4.7 mmol/g of COOH groups, which suffered hydrolysis near pH 4. The Weber and Morris model, applied to kinetic results of lead uptake, showed that intraparticle diffusion was the rate-controlling step in lead sorption by dry alginate beads. Equilibrium experiments were performed and the data were fitted with different isotherm models. The Langmuir equation was the most adequate to model lead sorption. The maximum uptake capacity (q _max) was estimated as 339 mg/g and the Langmuir constant (b) as 0.84 l/mg. These values were compared with that of other sorbents found in the literature, indicating that dry protonated calcium alginate beads are among the best biosorbents for the treatment and recovery of heavy metals from aqueous streams.     

Highly efficient removal of diazinon pesticide from aqueous solutions by using coconut shell-modified biochar

This study evaluates the adsorption of diazinon from aqueous solutions onto coconut shell-modified biochar using a batch system. The amount of dosage and initial pH are the main parameters being studied to obtain maximum adsorption capacity of the probe molecules. The carbonized coconut shell biochar (BC1), activated coconut shell biochar (BC2), chemically modified phosphoric acid (BC3) and sodium hydroxide coconut shell biochar (BC4) were prepared and tested as variables in the adsorption experiment. The characteristic of biochar via SEM, EDX and BET analysis revealed the large porous of surface morphology and slight changes in the composition with high surface area (405.97 – 508.07 m²/g) by following the sequence of BC3 > BC2 > BC4. Diazinon removal percentage as high as 98.96% was achieved at pH 7 with BC3 as adsorbent dosing at 5.0 g/L. The high coefficient of determination, R² with a small value of ERRSQ and χ² error analysis present the BC1 (0.9971) and BC2 (0.9999) are best fitted with Freundlich isotherm indicates multilayer sorption onto heterogeneous surface whereby the Langmuir isotherm model is the best fitting is described of monolayer adsorption process onto the homogenous surface of BC3 and BC4. The results indicated the maximum adsorption capacity (q_m) was achieved by BC3 with 10.33 mg/g, followed by BC2 (9.65 mg/g) in accordance to the Langmuir isotherm while Freundlich isotherm showed the highest adsorption capacity (k_F) with 1.73 mg/g (L/mg)^1/n followed by BC4 with 0.63 mg/g (L/mg)^1/n at favorable adsorption isotherm (1 ≤ n ≤ 10). Thus, the results obtained depicted that BC2 and BC3 are highly efficient adsorbents and both exhibit great potential in removing diazinon from aqueous solutions.     

Synthesis and characterisation of magnetic activated carbon/diopside nanocomposite for removal of reactive dyes from aqueous solutions: experimental design and optimisation

In this work, a series of magnetic activated carbon/nanodiopside (Fe₃O₄/AC/Diop) nanocomposites were synthesised and used for the removal of reactive green KE-4BD dye from the aqueous solution. After preparation of nanodiopside by sol-gel method and activated carbon from coconut husk, first, Fe₃O₄/AC composite was prepared by in situ synthesis of Fe₃O₄ nanoparticles between activated carbon pores, and then, different percentages of Fe₃O₄/AC/Diop nanocomposites were prepared by simple mixing of Fe₃O₄/AC composite and Diop in ethanol. Formation of Fe₃O₄/AC and Fe₃O₄/AC/Diop composites was characterised by FTIR, field emission scanning electron microscopy, BET, XRD and vibrating sample magnetometer analyses. Thermogravimetric analysis was used to show the adsorption capacity of the adsorbent more accurately. Effects of amount of adsorbent, initial pH, contact time and dye concentration on reactive green dye removal were also studied using central composite design. Optimal conditions for maximum reactive green KE-4BD dye adsorption (98.35%) process were as follows: pH= 4.90, adsorbent amount: 0.015 g, dye concentration: 37.17 mg/L and contact time: 10.12 min, respectively. In addition, the adsorption kinetics, thermodynamics and isotherms were examined. Adsorption isotherms (q_max: 344.827 mg/g), kinetics and thermodynamics were demonstrated that the sorption processes were better described by the pseudo-second-order equation and the Langmuir equation.     

Mechanistic insights into methylene blue removal via olive stone-activated carbon: A study on surface porosity and characterization

Global attention is increasingly focused on the adverse health and environmental impacts of textile dyes, marking the necessity for effective and sustainable dye remediation strategies in industrial wastewater. This study introduces a novel, eco-friendly activated carbon produced from olive stones (OLS), a readily available by-product of the olive oil industry. The OLS was chemically activated with H₃PO₄ and KOH, creating two materials: OLS-P and OLS-K, respectively. These were then utilized as cost-effective adsorbents for the removal of methylene blue (MB) dye. The activated materials were characterized via X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FTIR), iodine number, and pHpzc analysis, with the zero-point charge determined as approximately pH 1 for OLS-P and pH 8 for OLS-K. Batch adsorption experiments conducted at various temperatures revealed that adsorption process followed the pseudo-second-order kinetic model and the Langmuir isotherm model. Temperature was found to significantly impact adsorption performance, with OLS-K demonstrating a substantial increase in adsorption capacity (q_e) from 6.27 mg/g at 23˚C to 94.7 mg/g at 32 ˚C. Conversely, OLS-P displayed a decrease in q_e from 16.78 mg/g at 23 ˚C to 3.67 mg/g at 32 ˚C as temperature increased. The study highlights the potential of KOH-treated olive stones as a promising, cost-efficient adsorbent for methylene blue remediation from wastewater.     

Preparation of biomass-derived phosphorus-doped microporous carbon material and its application in dye adsorption and CO2 capture

Microporous P-doped carbon materials are synthesized by a pyrolysis method using MCM-22 as a template, sucrose as a precursor, and phosphoric acid as phosphorus sources. The results show that the pore structure of the carbon materials can be adjusted by changing the amount of phosphoric acid and template. When the P/C molar ratio is 0.075, the obtained P-doped microporous carbon material shows excellent specific surface area up to 621 m²/g and shows a high adsorption capacity of 199.40 mg/g for crystal violet dye, with a removal rate of 98.9%. When testing the CO₂ adsorption capacity, it was found that the maximum adsorption capacity reached 63 mg/g and remained stable after 10 adsorption and desorption cycles, with excellent cycle stability. The adsorption obeys pseudo-second-order kinetic model, and the adsorption isotherm follows the Langmuir model.     

What is the correct form of BET isotherm for modeling liquid phase adsorption?

In this work subtleties of application of BET isotherm for liquid phase adsorption is presented. It has been shown that direct use of the classical BET equation (which was developed for gas phase adsorption) to liquid phase adsorption leads to ambiguous and erroneous results. Some cases of misuse of BET equation for liquid phase adsorption have been revisited. By close examination of the development of the classical equation, the causes of misunderstandings were elucidated and the suitable form of the BET equation for liquid phase adsorption was developed. As case studies, the classical form of the BET equation along with the correct form of the equation for liquid phase have been applied for modeling liquid phase adsorption of methyl tert-butyl ether (MTBE) on perfluorooctyl alumina, phenol on activated carbon and pentachlorophenol on carbonized bark. It has been shown that direct application of the classical BET isotherm to liquid phase adsorption results in poor and erroneous estimation of the equation parameters. For example, in aqueous phase adsorption of MTBE on perfluorooctyl alumina, the monolayer adsorption capacity of the adsorbent was calculated as 9.7 mg/g instead of 3.3 mg/g or the saturation concentration of MTBE in water was calculated as 1212 mg/L instead of 42000 mg/L.     

A Simple One-Step Modification of Shrimp Shell for the Efficient Adsorption and Desorption of Copper Ions

Removing toxic heavy metal species from aqueous solutions is a point of concern in our society. In this paper, a promising biomass adsorbent, the modified waste shrimp shell (MS), for Cu (II) removal was successfully prepared using a facile and simple one-step modification, making it possible to achieve high-efficiency recycling of the waste NaOH solution as the modification agent. The outcome shows that with the continuous increase in pH, temperature and ion concentration, the adsorption effect of MS on Cu (II) can also be continuously improved. Adsorption isotherm and adsorption kinetics were fitted with the Langmuir isotherm model and the pseudo-second-order model, respectively, and the maximum adsorption capacity of Cu (II) as obtained from the Langmuir isotherm model fitting reached 1.04 mmol/g. The systematic desorption results indicated that the desorption rate of Cu (II) in the MS could reach 100% within 6 min, where HNO₃ is used as the desorption agent. Moreover, experiments have proven that after five successive recycles of NaOH as a modifier, the adsorption capacity of MS on Cu (II) was efficient and stable, maintaining tendency in 0.83–0.85 mmol/g, which shows that waste NaOH solution can be used as a modification agent in the preparation of waste shrimp shell adsorbent, such as waste NaOH solution produced in industrial production, thereby making it possible to turn waste into renewable resources and providing a new way to recycle resources.     

土壤中正丁基黄原酸钾与铅离子的吸附特性研究

通过静态试验研究了土壤对正丁基黄原酸钾的吸附性能和影响因素,以及正丁基黄原酸钾-铅复合污染体系的吸附平衡与动力学特征。结果表明,土壤对正丁基黄原酸钾的吸附过程遵循Lagergren二级动力学模型,等温吸附可用Freundlich模型拟合,提高温度有利于吸附,土壤对正丁基黄原酸钾的吸附属于内扩散控制过程;土壤吸附正丁基黄原酸钾最佳p H范围为5~9,p H较低时正丁基黄原酸钾易被酸解,碱性环境(p H10)将抑制土壤对正丁基黄原酸钾的吸附;正丁基黄原酸钾与Pb2+形成难溶络合物而严重影响了Pb2+在土壤中的吸附,使Pb2+的吸附速率常数由38.319g/(mg·min)提高到70.350g/(mg·min),平衡吸附量(qe)由1.909mg/g降低到1.385mg/g,且影响程度随着Pb2+浓度的升高而减弱。