Yeast Strains and Wort Color as Factors Affecting Effects of the Ethanol Fermentation Process

Dark malts used in the production of brewing wort affect the ethanol fermentation process, the phenolic content, antioxidant capacity and the physiology of yeast cells. An innovative element of this research is the combination of investigating the effect of beer wort color modulated by the use of dark specialty malts on the course and effects of fermentation and the characteristics of post-fermentation yeast biomass of brewer’s strains with different characteristics. Dark and pale beer were obtained. The beers had different ethanol contents (4.51–5.79% v/v), resulting from real (62.29–80.36%) and apparent (75.37–98.26%) attenuation levels. Metabolic and morphological differences were demonstrated in the brewer’s yeast strains used. S. cerevisiae var. diastaticus was distinguished by its ability to ferment dextrin, resulting in the highest ethanol content in beers. The total phenolic content in beer depends on the color of the wort and the yeast strain used (244.48–547.56 mg of gallic acid/L). Dark beers show higher ferric ion reduction ability (FRAP) and antioxidant capacity (ABTS^•+) than pale beers fermented with the same yeast strains. Through biomass analysis, differences in yeast cell physiology depending on yeast strain and beer wort color were also revealed.     

Effect of the Addition of Lemongrass (Cymbopogon citratus) on the Quality and Microbiological Stability of Craft Wheat Beers

Lemongrass (Cymbopogon citratus) is a valuable source of vitamins, macro- and microelements, and essential oils. The purpose of this study was to compare the physicochemical properties, sensory properties, antioxidant activity, and microbiological stability of wheat beers enriched with varying additions of crushed lemongrass. Sensory evaluation showed that wheat beers enriched with 2.5% m/v lemongrass were characterised by balanced taste and aroma (overall impression). Physicochemical analysis of the wheat beers showed that increasing the concentration of lemongrass in the finished product negatively affected the ethanol content. Alcohol content in wheat beer enriched with 1% m/v lemongrass was on average 14.74% higher than wheat beer enriched with 2.5% m/v lemongrass and on average 17.93% higher than wheat beer enriched with 5% m/v addition of lemongrass. The concentration of lemongrass in the finished product also increased the acidity of the beers and affected the colour of the wheat beers compared to the control beer. The total polyphenol content and antioxidant activity of lemongrass-enriched wheat beers varied. Of the lemongrass-enriched beers analysed, the beer product with 5% m/v lemongrass was the most microbiologically stable. According to the study, crushed lemongrass-enriched wheat beer may represent a new trend in the brewing industry, but the brewing process still needs to be improved.     

Physicochemical Properties and Antioxidant Activity of Portuguese Craft Beers and Raw Materials

There is an increase in the popularity of craft beer, which is produced by small, independent, and traditional breweries. Since craft beer popularity is rising in Portugal this research focused on assessing physicochemical parameters, total phenolic content (TPC) and the antioxidant capacity of Portuguese craft beers and raw materials used in beer production. In this experimental study, 19 beer samples were analyzed. Parameters such as pH, Total Acidity, Reducing Sugar Content and TPC were evaluated. For the determination of antioxidant activity, DPPH scavenging activity and metal chelating activity (MCA) were analyzed in all samples. Craft beers demonstrated a high phenolic content (ranging from 343.78 mg GAE/L to 2172.49 mg GAE/L), significantly different from industrial beers. Craft beers demonstrated a higher inhibition of DPPH radicals and higher MCA than the raw materials. DPPH inhibition ranged from 36.5% to 96.0% for malt and 64.7% to 79.6% in hops samples. MCA also varied between the different samples, with results of 12.0% to 24.8% in malt samples and 3.8% to 23.5% in hops. Raw materials can potentially influence the antioxidant activity of the resulting beer. Positive correlations between TPC and physicochemical properties can be useful to help consumers choose beers with added value for health.     

Comparative Metabolomic Analysis of Moromi Fermented Using Different Aspergillus oryzae Strains

Aspergillus oryzae (A. oryzae) is an important starter in the fermentation of koji and moromi. However, the effect of different A. oryzae strains on the quality of moromi has rarely been studied. For this reason, this study analyzed the physicochemical properties, enzyme activity, sensory quality, and metabolite profiles of moromi samples fermented using two strains (A. oryzae KCCM12012P (moromi-1) and KCCM12804P (moromi-2)), which were newly isolated from fermented soy foods, and compared them to those of a commercialized A. oryzae strain (control). Amino-type nitrogen contents of moromi-1 and moromi-2 samples were higher than that of control moromi, and their amylase and protease activities were also higher. Moreover, metabolite profiles of moromi were significantly altered according to strains. In particular, the levels of many amino acids, peptides, nucleotides, and acidic compounds were altered, which resulted in changes in the sensory quality of moromi. Although volatile compounds were not investigated, the results suggested that the quality of moromi was significantly different for newly isolated strains, especially A. oryzae KCCM12804P, and they were superior to the commercial strain in terms of taste-related substances. Therefore, these strains could be used as good starters to produce moromi and soy sauce with good sensory quality.     

Online monitoring of higher alcohols and esters throughout beer fermentation by commercial Saccharomyces cerevisiae and Saccharomyces pastorianus yeast

Higher alcohols and esters are among the predominant classes of volatile organic compounds (VOCs) that influence the quality of beer. The concentrations of these compounds are determined through a specific yeast strain selection and fermentation conditions. The effect of yeast strains on the formation of higher alcohols and esters throughout fermentations (at 20°C) was investigated. Flavour-relevant esters (ethyl acetate, isoamyl acetate, ethyl hexanoate and ethyl octanoate) and higher alcohols (isoamyl alcohol, isobutyl alcohol and phenylethyl alcohol) were monitored throughout the fermentation using proton transfer reaction–time of flight–mass spectrometry (PTR-ToF-MS) coupled with an automated sampling system for continuous measurements. Compound identification was confirmed by analysis of samples using gas chromatography–mass spectrometry (GC–MS). Results demonstrated the specific time points where variation in higher alcohol and ester generation between yeast strains occurred. In particular, the concentrations of isoamyl acetate, ethyl octanoate and isoamyl alcohol between yeast strains were significantly different over the first 2 days of fermentation; whereas, after Day 3, no significant differences were observed. The two Saccharomyces pastorianus strains produced comparable concentrations of the key higher alcohols and esters. However, the key higher alcohol and ester concentrations varied greatly between the two S. cerevisiae strains. The use of PTR–ToF–MS to rapidly measure multiple yeast strains provides new insights on fermentation for brewers to modify the sensory profile and optimise quality.     

Effect of Hop Varieties and Forms in the Hopping Process on Non-Alcoholic Beer Quality

The aim of this study was to determine how the hopping technique affects the quality of non-alcoholic beer (NAB). A series of NABs were brewed and tested for basic physicochemical characteristics, profiles of selected volatile compounds, and microbial contamination. The brewing process yielded 13 experimental groups of beers, all of which had an ethanol content of <0.5%v/v. Among the batches brewed with ‘Marynka’ hops, the pellet form was found to provide the highest concentrations of hop-derived volatile compounds, whereas in the ‘Magnum’ groups, the extracts and whole hops proved superior. Humulene and caryophyllene were the primary volatiles in terms of quantity. All the brews were contamination-free—no microbes other than yeast cells were detected. Their microbiological purity was also supported by an assay of beer-defect indicators (volatile compounds), which only showed low levels of acetaldehyde, 1-propanol, 2-methylbutanol, and 3-methylbutanol. The hopping technique deployed was found not to affect the physicochemical parameters of NABs, but did have a significant impact on their volatile compound profile.     

Effects of Lacticaseibacillus rhamnosus LOCK900 on Development of Volatile Compounds and Sensory Quality of Dry Fermented Sausages

Traditional dry fermented meat products are highly appreciated by consumers. A probiotic starter culture increases their attractiveness through sensory qualities and a potential health-promoting effect. The ability to scale the laboratory solution to industrial conditions is an additional scientific and practical value of a new way of using probiotics in the meat industry. The aim was to evaluate the influence of the probiotic starter culture Lacticaseibacillus rhamnosus LOCK900 on the development of volatile organic compounds and the sensory quality of dry fermented pork sausages during fermentation and refrigeration storage. The microbiological and sensory characteristic (QDA method) and volatile compound (gas chromatography coupled with mass spectrometry: GC–MS) were evaluated. The number of LOCK900 cells during 12 weeks of storage remained above 6 log CFU g⁻¹, making this product a functional food. The addition of probiotic LOCK900 increased the levels of acidic volatile compounds, aldehydes, and esters, which, combined with the additives and spices used, had a positive effect on the sensory properties of ripening sausages. The sausages with LOCK900 were characterised by positive sensory features, and their overall quality remained high during storage and did not differ from that of the control sausages.     

Development of a dynamic headspace solid-phase microextraction procedure coupled to GC-qMSD for evaluation the chemical profile in alcoholic beverages

In the present study, a simple and sensitive methodology based on dynamic headspace solid-phase microextraction (HS-SPME) followed by thermal desorption gas chromatography with quadrupole mass detection (GC-qMSD), was developed and optimized for the determination of volatile (VOCs) and semi-volatile (SVOCs) compounds from different alcoholic beverages: wine, beer and whisky. Key experimental factors influencing the equilibrium of the VOCs and SVOCs between the sample and the SPME fibre, as the type of fibre coating, extraction time and temperature, sample stirring and ionic strength, were optimized. The performance of five commercially available SPME fibres was evaluated and compared, namely polydimethylsiloxane (PDMS, 100 μm); polyacrylate (PA, 85 μm); polydimethylsiloxane/divinylbenzene (PDMS/DVB, 65 μm); carboxen™/polydimethylsiloxane (CAR/PDMS, 75 μm) and the divinylbenzene/carboxen on polydimethylsiloxane (DVB/CAR/PDMS, 50/30 μm) (StableFlex).An objective comparison among different alcoholic beverages has been established in terms of qualitative and semi-quantitative differences on volatile and semi-volatile compounds. These compounds belong to several chemical families, including higher alcohols, ethyl esters, fatty acids, higher alcohol acetates, isoamyl esters, carbonyl compounds, furanic compounds, terpenoids, C13-norisoprenoids and volatile phenols. The optimized extraction conditions and GC-qMSD, lead to the successful identification of 44 compounds in white wines, 64 in beers and 104 in whiskys. Some of these compounds were found in all of the examined beverage samples.The main components of the HS-SPME found in white wines were ethyl octanoate (46.9%), ethyl decanoate (30.3%), ethyl 9-decenoate (10.7%), ethyl hexanoate (3.1%), and isoamyl octanoate (2.7%). As for beers, the major compounds were isoamyl alcohol (11.5%), ethyl octanoate (9.1%), isoamyl acetate (8.2%), 2-ethyl-1-hexanol (5.9%), and octanoic acid (5.5%). Ethyl decanoate (58.0%), ethyl octanoate (15.1%), ethyl dodecanoate (13.9%) followed by 3-methyl-1-butanol (1.8%) and isoamyl acetate (1.4%) were found to be the major VOCs in whisky samples.     

Feasibility of Defatted Juice from Sea-Buckthorn Berries (Hippophae rhamnoides L.) as a Wheat Beer Enhancer

Juice made from sea-buckthorn berries (Hippophae rhamnoides L.) is a valuable source of bioactive compounds, vitamins, as well as micro- and macronutrients. By applying defatted sea-buckthorn juice, it is possible to enhance wheat beer and change its sensory properties and the contents of bioactive compounds in the finished product. A sensory assessment showed that wheat beers with a 5% v/v addition of sea-buckthorn juice were characterised by a balanced taste and aroma (overall impression). Physicochemical analyses showed that, compared to the control samples, wheat beers enhanced with defatted sea-buckthorn juice at a rate of 5% v/v or 10% v/v had high total acidity with respective mean values of 5.30 and 6.88 (0.1 M NaOH/100 mL), energy values lower on average by 4.04% and 8.35%, respective polyphenol contents of 274.1 mg GAE/L and 249.7 mg GAE/L, as well as higher antioxidant activity (measured using DPPH, FRAP, and ABTS assays). The findings show that the samples of wheat beer enhanced with sea-buckthorn juice had average ascorbic acid contents of 2.5 and 4.5 mg/100 mL (in samples with 5% v/v and 10% v/v additions, respectively) and contained flavone glycosides, e.g., kaempferol-3-O-glucuronide-7-O-hexoside. Based on the current findings, it can be concluded that wheat beer enhanced with sea-buckthorn juice could emerge as a new trend in the brewing industry.     

Insights on beer volatile profile: Optimization of solid‐phase microextraction procedure taking advantage of the comprehensive two‐dimensional gas chromatography structured separation

The aroma profile of beer is crucial for its quality and consumer acceptance, which is modu‐lated by a network of variables. The main goal of this study was to optimize solid‐phase microextraction experimental parameters (fiber coating, extraction temperature, and time), taking advantage of the comprehensive two‐dimensional gas chromatography structured separation. As far as we know, it is the first time that this approach was used to the untargeted and comprehensive study of the beer volatile profile. Decarbonation is a critical sample preparation step, and two conditions were tested: static and under ultrasonic treatment, and the static condition was selected. Considering the conditions that promoted the highest extraction efficiency, the following parameters were selected: poly(dimethylsiloxane)/divinylbenzene fiber coating, at 40ºC, using 10 min of pre‐equilibrium followed by 30 min of extraction. Around 700–800 compounds per sample were detected, corresponding to the beer volatile profile. An exploratory application was performed with commercial beers, using a set of 32 compounds with reported impact on beer aroma, in which different patterns can be observed through the structured chromatogram. In summary, the obtained results emphasize the potential of this methodology to allow an in‐depth study of volatile molecular composition of beer.     

Method optimization by solid-phase microextraction in combination with gas chromatography with mass spectrometry for analysis of beer volatile fraction

A simple and sensitive method for the analysis of beer volatile compounds was optimised using headspace solid-phase microextraction (SPME) and gas chromatography with mass detection. Headspace SPME using a 75 microm Carboxen-polydimethylsiloxane (CAR-PDMS) fiber provided effective sample enrichment and enabled extraction of a wide variety of compounds. The reproducibility depended on the compounds, with a mean value of 1.4% for alcohols, 3.3% for ethers, 6.7% for aldehydes, 3.4% for acids, 1.7% for aromatic compounds, 2.4% for esters, 7.4% for hydrocarbons, 1.8% for alicyclic compounds, and 3.4% for heterocyclic compounds. The optimised methodology can be used to compare volatile profile from different types of beers and eventually to study the evolution of a particular beer during aging.     

Aromatic Higher Alcohols in Wine: Implication on Aroma and Palate Attributes during Chardonnay Aging

The higher alcohols 2-phenylethanol, tryptophol, and tyrosol are a group of yeast-derived compounds that have been shown to affect the aroma and flavour of fermented beverages. Five variants of the industrial wine strain AWRI796, previously isolated due to their elevated production of the ‘rose-like aroma’ compound 2-phenylethanol, were characterised during pilot-scale fermentation of a Chardonnay juice. We show that these variants not only increase the concentration of 2-phenylethanol but also modulate the formation of the higher alcohols tryptophol, tyrosol, and methionol, as well as other volatile sulfur compounds derived from methionine, highlighting the connections between yeast nitrogen and sulfur metabolism during fermentation. We also investigate the development of these compounds during wine storage, focusing on the sulfonation of tryptophol. Finally, the sensory properties of wines produced using these strains were quantified at two time points, unravelling differences produced by biologically modulating higher alcohols and the dynamic changes in wine flavour over aging.     

Development of a rapid method based on solid-phase extraction and liquid chromatography with ultraviolet absorbance detection for the determination of polyphenols in alcohol-free beers

An analytical method based on solid-phase extraction (SPE) and followed by liquid chromatographic separation and ultraviolet detection (HPLC-UV) is proposed for the determination of 10 phenolic compounds which participate on beer stability and sensory properties in alcohol-free beers. Acetonitrile was found to be the most appropriate solvent for the elution of polyphenolic compounds adsorbed on C18 cartridges. The performance of the method was assessed by the evaluation of parameters such as absolute recovery (generally higher than 60%), repeatability (lower than 10%), linearity (r2 higher than 0.993) and limits of quantitation (ranging from 1 to 37 microg/L); no matrix effects were observed. The polyphenol content of different Spanish alcohol-free beers is presented. Five phenolic compounds such as protocatechuic, p-coumaric, ferulic, caffeic acids, and (+)-catechin were identified at levels lower than 10 mg/L.     

Effect of Ozone-Treated or Untreated Saskatoon Fruits (Amelanchier alnifolia Nutt.) Applied as an Additive on the Quality and Antioxidant Activity of Fruit Beers

Fruit of Saskatoon (Amelanchier alnifolia Nutt.) are a good source of bioactive compounds, such as polyphenols, including anthocyanins, as well as vitamins, macro- and microelements and fibre. By treating Saskatoon fruits with gaseous ozone, and adding the material as an enhancer to barley beers, it is possible to impact the contents of bioactive compounds in the produced fruit beers. Sensory tests showed that beers made from barley with addition of Saskatoon fruit of the ‘Smoky’ cultivar were characterised by the most balanced taste and aroma. Physicochemical analyses of fruit beers, produced with Saskatoon fruit pulp added on the seventh day of fermentation, showed that the beers enhanced with ozone-treated and untreated ‘Smoky’ Saskatoon fruits had the highest contents of alcohol, 5.51% v/v and 5.66% v/v, respectively, as well as total polyphenol contents of 395 mg GAE/L and 401 mg GAE/L, respectively, and higher antioxidant activity (assessed using DPPH^•, FRAP and ABTS^+• assays). It was demonstrated that the ozonation process led to a decrease in the contents of neochlorogenic acid, on average by 91.00%, and of caffeic acid by 20.62%, relative to the beers enhanced with ‘Smoky’ Saskatoon fruits not subjected to ozone treatment. The present study shows that Saskatoon fruits can be used in the production of beer, and the Canadian cultivar ‘Smoky’ is recommended for this purpose.     

Comparison of aroma-active volatiles and their sensory characteristics of mangosteen wines prepared by Saccharomyces cerevisiae with GC-olfactometry and principal component analysis

Mangosteen fruit is fermented with five different strains (i.e. GRE (Y1), Lalvin RC212 (Y2), Lalvin D254 (Y3), CGMCC2.23 (Y4) and CGMCC2.4 (Y5)) of the yeast Saccharomyces cerevisiae to make mangosteen wines. A total of 36 volatile compounds of the mangosteen wines were identified by gas chromatography-mass spectrometry and gas chromatography-pulsed flame photometric detection. A total of 35 odour-active compounds were identified by gas chromatography-olfactometry analysis and by the detection frequency (DF) method. The compounds with high DF values included ethyl octanoate, ethyl hexanoate and 3-methyl-2-butene-1-thiol. Principal component analysis was used to characterise the differences of the flavour profiles of those mangosteen wines. The result demonstrated that the samples could be divided into three groups that were associated closely with aroma-active compounds.     

The Effect of Salvia hispanica and Nigella sativa Seed on the Volatile Profile and Sensory Parameters Related to Volatile Compounds of Dry Fermented Sausage

The aim of the study was to evaluate the effects of Salvia hispanica and Nigella sativa seed addition on the volatile compounds and sensory characteristics (with particular emphasis on odor and flavor) of traditionally produced dry fermented sausages with reduced nitrites. Five different sausage formulations were prepared: control sample; samples with 1% and 2% addition of chia seed; samples with 1% and 2% addition of black cumin seed. The sausages were subjected to analysis including proximate chemical composition, volatile compound determination, and sensory analysis. The sausages with chia seed in the amounts of 1% and 2% as well as the sample with 1% addition of black cumin seed were characterized by positive sensory features, and their overall quality was rated above 7 c.u. on a 10-point scale, similar to the control sausage. Sausage samples with the addition of cumin seed were characterized by the highest herbal odor and flavor. The addition of Salvia hispanica and Nigella sativa seed significantly affected the amount of volatile compounds in fermented sausages. Sausages with black cumin presented the greatest amount of total volatile compounds, mainly contributed by terpenes.     

Changes in Organic Acids,Phenolic Compounds,and Antioxidant Activities of Lemon Juice Fermented by Issatchenkia terricola

High content of citric acid in lemon juice leads to poor sensory experience. The study aimed to investigate the dynamics changes in organic acids, phenolic compounds, and antioxidant activities of lemon juice fermented with Issatchenkia terricola WJL-G4. The sensory evaluation of fermented lemon juice was conducted as well. Issatchenkia terricola WJL-G4 exhibited a potent capability of reducing the contents of citric acid (from 51.46 ± 0.11 g/L to 8.09 ± 0.05 g/L within 60 h fermentation) and increasing total phenolic level, flavonoid contents, and antioxidant activities compared to those of unfermented lemon juice. A total of 20 bioactive substances, including 10 phenolic acids and 10 flavonoid compounds, were detected both in fermented and unfermented lemon juice. The lemon juice fermented for 48 h had better sensory characteristics. Our findings demonstrated that lemon juice fermented with Issatchenkia terricola exhibited reduced citric acid contents, increased levels of health-promoting phenolic compounds, and enhanced antioxidant activities.     

Characterization and classification of the aroma of beer samples by means of an MS e-nose and chemometric tools

An electronic nose based on coupling of headspace (HS) with a mass spectrometer (MS) has been used in this study to classify and characterize a series of beers according to their production site and chemical composition. With this objective, we analyzed 67 beers of the same brand and preparation process but produced in different factories. The samples were also subjected to sensory evaluation by a panel of experts. Linear discriminant analysis (LDA) was used as the classification technique and stepwise LDA based on Wilk’s lambda criterion was used to select the most discriminating variables. To interpret the aroma characteristics of the beers from the m/z ions obtained, score and loading bi-plots were obtained by applying canonical variables. Because the beers analyzed were marketed with the same name and brand, we expected to be working with the same product irrespective of its origin. However, results from both sensory evaluation and use of the e-nose revealed differences between factories. With the e-nose it was possible to relate these differences to the presence (and abundance) of characteristic ions of different compounds typically found in beer. These results demonstrate that the HS–MS e-nose is not only an aroma sensor capable to classify and/or differentiate samples but it can also provide information about the compounds responsible for this differentiation.     

Analysis of Phenolic Compounds in Lager Beers of Different Origin: A Contribution to Potential Determination of the Authenticity of Czech Beer

Beer contains a wide range of polyphenolic compounds originating mainly from malt and hops. In this work newly modified on-line coupled HPLC–photodiode-array (PDA)–MS methods were used for analysis of characteristic phenolic compounds in several Czech lager beers, in comparison with some foreign lager beers. After optimization of column type, elution mode, and gradient steepness, chromatography was performed with a Restek Ultra Aqueous, C₁₈ (5 μm, 250 mm × 4.6 mm) column at 30 °C and gradient elution using an optimized linear gradient of aqueous acetonitrile acidified with 1% acetic acid, at a flow rate 0.4 mL min^?1. In total, 49 compounds were identified. Eleven individual compounds, predominantly malt phenolics (gallic acid, (?)-catechin, epicatechin, ferulic acid, chlorogenic acid, morin, rutin, quercetin, caempherol, naringenin, and luteolin) were quantified by use of two detection techniques: MS with electrospray ionization and UV detection. Compared with foreign beers, Czech beers contained higher levels of most of the phenolic compounds; specific distributions of individual compounds were also observed. Experimental PDA results for individual polyphenols were evaluated statistically by modified cluster analysis. Because of very tight covariance of the data a new procedure was devised for correlation analysis. The set of beers analyzed can be divided into four clusters closely related to the origin of the and the technology used. It seems that some of the flavonoids have potential use in beer authenticity analysis.