Electric-discharge He/Xe/I<Subscript>2</Subscript> excimer-halogen UV lamp

The characteristics of a low-size low-pressure UV lamp operating on the atomic iodine resonant line (λ=206 nm) and xenon iodide (λ=253 nm) and dimer iodine (λ=342 nm) bands are investigated. A lamp with an interelectrode distance of 19 cm was pumped by a longitudinal dc glow discharge. The working gas mixtures were He/I₂ and He/Xe/I₂ mixtures with a total pressure of 50–1500 Pa. The output parameters of the electric-discharge excimer-halogen lamp were optimized in terms of the gas mixture pressure and composition and the power deposited in the discharge. It is shown that the total UV power emitted from the entire aperture of the lamp in the spectral range 200–350 nm attains 5–7 W with an efficiency of ≤5%.     

AlF<Subscript>3</Subscript> coating of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> for high-performance Li-ion batteries

AlF₃-coating is attempted to improve the performance of LiNi_0.5Mn_1.5O₄ cathode materials for Li-ion batteries. The prepared powders are characterized by scanning electron microscope, powder X-ray diffraction, charge/discharge, and impedance. The coated LiNi_0.5Mn_1.5O₄ samples show higher discharge capacity, better rate capability, and higher capacity retention than the uncoated samples. Among the coated samples, 1.0 mol% AlF₃-coated sample shows highest capacity after charge–discharged at 30 mA/g for 3 cycles, but 4.0 mol% coated sample exhibits the highest capacity and cycling stability when cycled at high rate of 150 and 300 mA/g. The 40th cycle discharge capacity at 300 mA/g current still remains 114.8 mAh/g for 4.0 mol% AlF₃-coated LiNi_0.5Mn_1.5O₄, while only 84.3 mAh/g for the uncoated sample.     

High power ultrafast Nd:YVO<Subscript>4</Subscript> laser mode locked by single wall carbon nanotube absorber

We use a single walled carbon nanotubes (SWCNTs) absorber to demonstrate a high power mode locking for Nd:YVO₄ lasers. Under the pump power of 12 W, continuous wave mode-locked (CWML) pulse were generated with the maximum average output power of 3.6 W and the pulse duration of 7.6 ps. The peak power and the single pulse energy of the mode-locked laser were up to 4.9 kW and 37.5 nJ, respectively. To our knowledge, this is the highest average output power of the CWML laser with the SWCNTs absorber reported.     

Study of mechanochemically prepared nanocrystalline La<Subscript>0.8</Subscript>Sr<Subscript>0.2</Subscript>MnO<Subscript>3</Subscript>

The nanocrystalline La_0.8Sr_0.2MnO₃ (LSM) is prepared by varying the revolutions per minute and milling time of planetary monomill during the mechanochemical method. The LSM forms in a relatively shorter milling time with an increase in the milling speed from 250 to 600 rpm. The structural phase transition from orthorhombic to rhombohedral phase in the LSM prepared by ball milling at the speed 250 rpm for 36 h is seen due to sintering it at 700 °C for 4 h. The crystallite size reduces with the increase in both the milling speed and the milling time individually or combined. The microhardness (HV) and sintered density increase with the reduction in the crystallite size. The temperature-activated transition temperature is suppressed by reducing the grain size in the nanometer range. The electrical dc conductivity increases with the reduction in the grain/crystallite size.     

Microwave conductivity of heavy fermions in UPd<Subscript>2</Subscript>Al<Subscript>3</Subscript>

Heavy-fermion compounds are characterized by electronic correlation effects at low energies which can directly be accessed with optical spectroscopy. Here we present detailed measurements of the frequency- and temperature-dependent conductivity of the heavy-fermion compound UPd₂Al₃ using broadband microwave spectroscopy in the frequency range 45 MHz to 40 GHz at temperatures down to 1.7 K. We observe the full Drude response with a relaxation time up to 50 ps, proving that the mass enhancement of the heavy charge carriers goes hand in hand with an enhancement of the relaxation time. We show that the relaxation rate as a function of temperature scales with the dc resistivity. We do not find any signs of a frequency-dependent relaxation rate within the addressed frequency range.     

Physical property characterization of bulk MgB<Subscript>2</Subscript> superconductor

We report synthesis, structure/micro-structure, resistivity under magnetic field [ρ(T)H], Raman spectra, thermoelectric power S(T), thermal conductivity κ(T), and magnetization of ambient pressure argon annealed polycrystalline bulk samples of MgB₂, processed under identical conditions. The compound crystallizes in hexagonal structure with space group P6/mmm. Transmission electron microscopy (TEM) reveals electron micrographs showing various types of defect features along with the presence of 3–4 nm thick amorphous layers forming the grain boundaries of otherwise crystalline MgB₂. Raman spectra of the compound at room temperature exhibited characteristic phonon peak at 600 cm^-1. Superconductivity is observed at 37.2 K by magnetic susceptibility χ(T), resistivity ρ(T), thermoelectric power S(T), and thermal conductivity κ(T) measurements. The power law fitting of ρ(T) give rise to Debye temperature (Θ_D) at 1400 K which is found consistent with the theoretical fitting of S(T), exhibiting Θ _D of 1410 K and carrier density of 3.81 × 10²⁸/m³. Thermal conductivity κ(T) shows a jump at 38 K, i.e., at T_c, which was missing in some earlier reports. Critical current density (J_c) of up to 10⁵ A/cm² in 1–2 T (Tesla) fields at temperatures (T) of up to 10 K is seen from magnetization measurements. The irreversibility field, defined as the field related to merging of M(H) loops is found to be 78, 68 and 42 kOe at 4, 10 and 20 K respectively. The superconducting performance parameters viz. irreversibility field (H_irr) and critical current density J_c(H) of the studied MgB₂ are improved profoundly with addition of nano-SiC and nano-diamond. The physical property parameters measured for polycrystalline MgB₂ are compared with earlier reports and a consolidated insight of various physical properties is presented.     

Multiple-wavelength lasing by multiform self-frequency conversion in Nd<Superscript>3+</Superscript>-doped La<Subscript>2</Subscript>CaB<Subscript>10</Subscript>O<Subscript>19</Subscript> crystals

The self-sum-frequency process was firstly demonstrated in Nd³⁺-doped La₂CaB₁₀O₁₉ (LCB) crystal. In addition, simultaneous participation of the fundamental laser in multi-self-frequency conversion including the self-frequency doubling was reported. Emissions at five different wavelengths (525, 529, 533.6, 1050 and 1069 nm) were simultaneously obtained. The output power of the three green visible lasers (525, 529 and 533.6 nm) generated by multi-self-frequency-conversion of the fundamental laser is up to 26.64 mW, and the light-light conversion efficiency is up to 4.85%. The lasers at 525 and 529 nm are very close to the green primary color G (526.3 nm) defined by the 1964CIERGB system, which has potential applications in laser-based high brightness display. The large frequency differences of 4–6 THz between 525 and 529 nm, 529 and 533.6 nm, as well as 1050 and 1069 nm, are also potential useful in generating THz waves by difference frequency generation (DFG) technique in a nonlinear optical (NLO) crystal.     

Pseudo-capacitive properties of LiCoO<Subscript>2</Subscript>/AC electrochemical capacitor in various aqueous electrolytes

LiCoO₂ particles were synthesized by a sol-gel process. X-ray diffraction analysis reveals that the prepared sample is a single phase with layered structure. A hybrid electrochemical capacitor was fabricated with LiCoO₂ as a positive electrode and activated carbon (AC) as a negative electrode in various aqueous electrolytes. Pseudo-capacitive properties of the LiCoO₂/AC electrochemical capacitor were determined by cyclic voltammetry, charge–discharge test, and electrochemical impedance measurement. The charge storage mechanism of the LiCoO₂-positive electrode in aqueous electrolyte was discussed, too. The results showed that the potential range, scan rate, species of aqueous electrolyte, and current density had great effect on capacitive properties of the hybrid capacitor. In the potential range of 0–1.4 V, it delivered a discharge specific capacitance of 45.9 Fg^–1 (based on the active mass of the two electrodes) at a current density of 100 mAg^–1 in 1 molL^–1 Li₂SO₄ aqueous electrolyte. The specific capacitance remained 41.7 Fg^–1 after 600 cycles.     

Electromagnetic wave absorption properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> octahedral nanocrystallines in gigahertz range

Large-scale octahedral Fe₃O₄ nanocrystallines with crystalline size of 100−500 nm were synthesized by a facile solvent-thermal method for electromagnetic wave application. The Fe₃O₄ nanocrystallines showed a higher saturation magnetization (M _s ) value of 86.8 emu/g and larger coercivity (H _cj ) value of 255 Oe than that of magnetite polycrystallines because of their good crystallization and dispersion. The epoxy resin composites with 40 vol% Fe₃O₄ powders provided good electromagnetic wave absorption performance (RL < −20 dB) in the range of 2.0–4.3 GHz over the absorber thicknesses of 3.5–6.8 mm. A minimum RL value of −47 dB was observed at 3.1 GHz with a thickness of 4.8 mm.     

Preparation of MnO<Subscript>2</Subscript>/WMNT composite and MnO<Subscript>2</Subscript>/AB composite by redox deposition method and its comparative study as supercapacitive materials

The manganese oxide/multi-walled carbon nanotube (MnO₂/MWNT) composite and the manganese oxide/acetylene black (MnO₂/AB) composite were prepared by translating potassium permanganate into MnO₂ which formed the above composite with residual carbon material using the redox deposition method and carbon as a reducer. The products were characterized by X-ray diffraction, Fourier transform infrared, and scanning electron microscope. Electrochemical properties of both the MnO₂/MWNT and MnO₂/AB electrodes were studied by using cyclic voltammetry, electrochemical impedance measurement, and galvanostatic charge/discharge tests. The results show that the MnO₂/MWNT electrode has better electrochemical capacitance performance than the MnO₂/AB electrode. The charge–discharge test showed the specific capacitance of 182.3 F·g⁻¹ for the MnO₂/MWNT electrode, and the specific capacitance of 127.2 F·g⁻¹ for the MnO₂/AB electrode had obtained, within potential range of 0–1 V at a charge/discharge current density of 200 mA·g⁻¹ in 0.5 mol·L⁻¹ potassium sulfate electrolyte solution in the first cycle. The specific capacitance of both the MnO₂/MWNT and MnO₂/AB electrodes were 141.2 F·g⁻¹ and 78.5 F·g⁻¹ after 1,200 cycles, respectively. The MnO₂/MWNT electrode has better cycling performance. The effect of different morphologies was investigated for both MnO₂/MWNT and MnO₂/AB composites.     

Memory effects in superparamagnetic La<Subscript>0.6</Subscript>Pb<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> nanoparticles

Using different temperature and field protocols, the memory behaviors in the dc magnetization and magnetic relaxation are observed at temperature below blocking temperature T_B = 93 K in weakly interacting manganite La_0.6Pb_0.4MnO₃ nanoparticles. The results indicate that the magnetic dynamics of this nanoparticle system is strongly correlated with a wide distribution of particle relaxation times, which may arise from the particle weak interaction and distribution of the particle size.     

Low-temperature synthesis of Cu-doped Li<Subscript>1.2</Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript> as cathode for reversible lithium storage

Li_{1 .2}V₃O₈ and Cu-doped Li_1.2V₃O₈ were prepared at a temperature as low as 300 °C by a sol-gel method. The structure, morphology, and electrochemical performance of the as-prepared samples were characterized by means of X-ray diffraction, scanning electron microscopy, electrochemical impedance spectroscopy, and the galvanostatic discharge–charge techniques. It is found that the Cu-doped Li_1.2V₃O₈ sample exhibits less capacity loss during repeated cycling than the undoped one. The Cu-doped Li_1.2V₃O₈ sample demonstrates the first discharge capacity of 275.9 mAh/g in the range of 3.8–1.7 V at a current rate of 30 mA/g and remains at a stable discharge capacity of 264 mAh/g within 30 cycles. Furthermore, the possible role that copper plays in enhancing the cycleability of Li_1.2V₃O₈ has also been elucidated.     

Metallic liquid hydrogen and likely Al<Subscript>2</Subscript>O<Subscript>3</Subscript> metallic glass

Dynamic compression has been used to synthesize liquid metallic hydrogen at 140 GPa (1.4 million bar) and experimental data and theory predict Al₂O₃ might be a metallic glass at ∼ 300 GPa. The mechanism of metallization in both cases is probably a Mott-like transition. The strength of sapphire causes shock dissipation to be split differently in the strong solid and soft fluid. Once the 4.5-eV H-H and Al-O bonds are broken at sufficiently high pressures in liquid H₂ and in sapphire (single-crystal Al₂O₃), electrons are delocalized, which leads to formation of energy bands in fluid H and probably in amorphous Al₂O₃. The high strength of sapphire causes shock dissipation to be absorbed primarily in entropy up to ∼400 GPa, which also causes the 300-K isotherm and Hugoniot to be virtually coincident in this pressure range. Above ∼400 GPa shock dissipation must go primarily into temperature, which is observed experimentally as a rapid increase in shock pressure above ∼400 GPa. The metallization of glassy Al₂O₃, if verified, is expected to be general in strong oxide insulators. Implications for Super Earths are discussed.     

Dielectric relaxation and ionic conductivity studies of Ag<Subscript>2</Subscript>ZnP<Subscript>2</Subscript>O<Subscript>7</Subscript>

The complex impedance of the Ag₂ZnP₂O₇ compound has been investigated in the temperature range 419–557 K and in the frequency range 200 Hz–5 MHz. The Z′ and Z′ versus frequency plots are well fitted to an equivalent circuit model. Dielectric data were analyzed using complex electrical modulus M* for the sample at various temperatures. The modulus plot can be characterized by full width at half-height or in terms of a non-exponential decay function f( \textt ) = exp( - \textt/t )^b \phi \left( {\text{t}} \right) = \exp {\left( { - {\text{t}}/\tau } \right)^\beta } . The frequency dependence of the conductivity is interpreted in terms of Jonscher’s law: s( w) = s_\textdc + \textAwⁿ \sigma \left( \omega \right) = {\sigma_{\text{dc}}} + {\text{A}}{\omega^n} . The conductivity σ _dc follows the Arrhenius relation. The near value of activation energies obtained from the analysis of M″, conductivity data, and equivalent circuit confirms that the transport is through ion hopping mechanism dominated by the motion of the Ag⁺ ions in the structure of the investigated material.     

Tunneling conductivity in lithiated transition metal oxide cathode Li<Subscript>0.9</Subscript>[Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>]O<Subscript>1.95</Subscript>

Electrical complex ac conductivity of the compound Li_0.9[Ni_1/3Mn_1/3Co_1/3]O_1.95 has been studied in the frequency range 10 Hz–2 MHz and in the temperature range 93–373 K. It has been observed that the frequency dependence of the ac conductivity obeys a power law and the temperature dependence of the ac conductivity is quite weak. The experimental data have been analyzed in the framework of several theoretical models based on quantum mechanical tunneling and classical hopping over barriers. It has been observed that the electron tunneling is dominant in the temperature range from 93 K to 193 K. A crossover of relaxation mechanism from electron tunneling to polaron tunneling is observed at 193 K. Out of the several models discussed, the electron tunneling and the polaron tunneling models are quite consistent with the experimental data for the complex ac conductivity. The various parameters obtained from the fits of the experimental results for the real and imaginary parts of the conductivity to the predictions of these models are quite reasonable.     

Charge dynamics of the spin-density-wave state in BaFe<Subscript>2</Subscript>As<Subscript>2</Subscript>

We report on a thorough optical investigation of BaFe₂As₂ over a broad spectral range and as a function of temperature, focusing our attention on its spin-density-wave (SDW) phase transition at T_SDW = 135 K. While BaFe₂As₂ remains metallic at all temperatures, we observe a depletion in the far infrared energy interval of the optical conductivity below T_SDW, ascribed to the formation of a pseudogap-like feature in the excitation spectrum. This is accompanied by the narrowing of the Drude term consistent with the dc transport results and suggestive of suppression of scattering channels in the SDW state. About 20% of the spectral weight in the far infrared energy interval is affected by the SDW phase transition.     

Spectroscopic Properties and Energy Transfer Analysis of Tm<Superscript>3+</Superscript>-Doped BaF<Subscript>2</Subscript>-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-La<Subscript>2</Subscript>O<Subscript>3</Subscript> Glass

This paper reports on the spectroscopic properties and energy transfer analysis of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂-La₂O₃ glasses with different Tm₂O₃ doping concentrations (0.2, 0.5, 2.0, 2.5, 3.0, 3.5, 3.5, 4.0 wt%). Mid-IR fluorescence intensities in the range of 1,300 nm−2,200 nm have been measured when excited under an 808 nm LD for all the samples with the same pump power. Energy level structure and Judd-Ofelt parameters have been calculated based on the absorption spectra of Tm³⁺, cross-relaxation rates and multi-phonon relaxation rates have been estimated with different Tm₂O₃ doping concentrations. The maximum fluorescence intensity at around 1.8 μm has been obtained in Tm₂O₃-3 wt% sample and the maximum value of calculated stimulated emission cross-section of Tm³⁺ in this sample is about 0.48 × 10⁻²⁰ cm² at 1,793 nm, and there is not any crystallization peak in the DSC curve of this sample, which indicate the potential utility of Tm³⁺-doped BaF₂-Ga₂O₃-GeO₂- La₂O₃ glass for 2.0-μm optical fiber laser.     

One-pot fabrication and enhanced thermoelectric properties of poly(3,4-ethylenedioxythiophene)-Bi<Subscript>2</Subscript>S<Subscript>3</Subscript> nanocomposites

Bi₂S₃ nanotubes and de-doped poly(3,4-ethylenedioxythiophene) (PEDOT) composite nanopowders were synchronously synthesized by a one-pot self-assembly method. The powders were characterized by X-ray powder diffraction, infrared spectroscopy, and transmission electron microscopy, respectively. Thermoelectric properties of the Bi₂S₃–PEDOT composite nanopowders with different Bi₂S₃ contents after being cold pressed into pellets were measured at room temperature. The sample with 36.1 wt% Bi₂S₃ has a highest power factor of 2.3 μWm⁻¹K⁻², which is higher than that of both pure PEDOT (0.445 μWm⁻¹K⁻²) and Bi₂S₃ (1.94 μWm⁻¹K⁻²).     

Irradiation of amorphous Ta<Subscript>42</Subscript>Si<Subscript>13</Subscript>N<Subscript>45</Subscript> film with a femtosecond laser pulse

Films of 260 nm thickness, with atomic composition Ta₄₂Si₁₃N₄₅, on 4″ silicon wafers, have been irradiated in air with single laser pulses of 200 femtoseconds duration and 800 nm wave length. As sputter-deposited, the films are structurally amorphous. A laterally truncated Gaussian beam with a near-uniform fluence of ∼0.6 J/cm² incident normally on such a film ablates 23 nm of the film. Cross-sectional transmission electron micrographs show that the surface of the remaining film is smooth and flat on a long-range scale, but contains densely distributed sharp nanoprotrusions that sometimes surpass the height of the original surface. Dark field micrographs of the remaining material show no nanograins. Neither does glancing angle X-ray diffraction with a beam illuminating many diffraction spots. By all evidence, the remaining film remains amorphous after the pulsed femtosecond irradiation.     

Charge rate influence on the electrochemical performance of LiFePO<Subscript>4</Subscript> electrode with redox shuttle additive in electrolyte

Overcharge performance of LiFePO₄ cells is investigated through adding 2, 5-ditertbutyl 1, 4-dimethoxybenzene (DDB) as redox shuttle into electrolyte (RS electrolyte) at different charge rate. RS electrolytes with DDB works well as overcharge protection at low charge rate of less than 0.1 C. Novel charge/discharge characteristics are observed when charge rate increases in the cell with RS electrolyte. Especially, larger discharge capacities are obtained at the same discharge rate after charge rate gets higher than 0.1 C rate. Discharge capacity is larger in the cell with RS electrolyte than that in the cell without RS electrolyte at the same charge and discharge rate. At the same charge rate, cells with RS electrolyte have better cycling performances and larger discharge capacity than that with conventional electrolyte. These indicate that DDB accumulates in cathode with cycling and influences electrode–electrolyte interface reactions.