Reaction Mechanism for 2-Methylfuran Formation during Hydrogenation of Furfurvl Alcohol Catalvzed bv Cu(111) Plane

采用广义梯度近似的密度泛函理论并结合平板模型的方法,详细研究了糠醇在Cu(111)面上反应生成2-甲基呋喃的反应历程,优化了糠醇在Cu(111)面的吸附模型,并采用完全线性同步和二次同步变换的方法,对三种可能的反应机理中的各反应步骤进行了过渡态搜索.结果表明,糠醇主要通过支链上OH与Cu(111)面相互作用,易形成ψCH2和ψCH2O中间体(ψ代表呋喃环).糠醇进一步加氢机理很可能为:引入的氢物种明显降低了糠醇分解形成的中间体ψCH2的活化能,并促进了它的形成；中间体ψCH2更易从糠醇中获得H而生成2-甲基呋喃.该过程的控速步骤为ψCH2O*→βCHO*+ H*,活化能为199.0kJ/mol,总反应是2ψCH2OH=ψCH3+ ψCHO+ H2O.     

碳前驱体CH3ArCH2NH2热解反应的热力学和动力学DFT研究

在实验研究基础上,通过量子化学理论计算对碳前驱体CH3ArCH2NH2的热裂解机理作了进一步的研究.利用Gaussian98程序包中AM1方法及DFTUB3LYP/3-21G*方法,对化合物5种可能热裂解路径的热力学和动力学计算结果表明,CH3ArCH2NH2热裂解的主反应路径为生成自由基CH3ArCH2*和NH2*,其主反应路径AM1计算的活化能Ea=230.78kJ/mol,DFT计算的活化能Ea=321.18kJ/mol;比较键焓计算的数据与相应的实验数据,发现DFT计算结果与实验结果吻合得较好;通过分析优化的反应物及产物自由基的部分结构参数,了解了理论支持主反应的原因;计算的产物自由基的空间构型表明主反应路径生成的产物自由基相互间若进行稠环缩合反应,将获得分子平面取向性很好的稠环芳烃产物.     

Cu(111)面上糠醇加氢生成2-甲基呋喃的反应机理

采用广义梯度近似的密度泛函理论并结合平板模型的方法,详细研究了糠醇在Cu(111)面上反应生成2-甲基呋喃的反应历程,优化了糠醇在Cu(111)面的吸附模型,并采用完全线性同步和二次同步变换的方法,对三种可能的反应机理中的各反应步骤进行了过渡态搜索.结果表明,糠醇主要通过支链上OH与Cu(111)面相互作用,易形成ψCH2和ψCH2O中间体(ψ代表呋喃环).糠醇进一步加氢机理很可能为:引入的氢物种明显降低了糠醇分解形成的中间体ψCH2的活化能,并促进了它的形成;中间体ψCH2更易从糠醇中获得H而生成2-甲基呋喃.该过程的控速步骤为ψCH2O*→ψCHO*+H*,活化能为199.0kJ/mol,总反应是2ψCH2OH=ψCH3+ψCHO+H2O.     

异戊烯与甲醇成醚反应机理的量子化学研究

对2-甲基-1-丁烯、2-甲基-2-丁烯与甲醇反应生成甲基叔戊基醚的反应历程进行了量子化学研究, 结果表明, 反应过程包括两个基元步骤: 2-甲基-1-丁烯和2-甲基-2-丁烯与氢离子作用生成碳正离子, 活化能分别为E1=2.26 kJ/mol, E2=7.72 kJ/mol; 甲醇与叔碳正离子反应成醚, 活化能为E3=1.29 kJ/mol, 碳正离子的生成是反应的速控步骤. 2-甲基-1-丁烯与2-甲基-2-丁烯相互转化的异构化活化能分别为E'1=4.40 kJ/mol, E'2=63.11 kJ/mol, 高于成醚的活化能, 反应体系不发生烯烃相互转化的异构化反应.     

氧原子和甲基自由基反应机理的理论研究

用分子轨道从头算和密度泛函理论（DFT）中的B3LYP方法以及适中基组6-311+G(2df,2p)对氧原子与甲基CH3反应进行了系统的研究。计算给出了反应通道上各驻点物种的构型参数、振动频率和能量。结果表明： CH2OH比CH3O稳定,能量约低26.63 kJ/mol,且生成氢和甲醛为其最主要反应通道。     

Pd催化甲醇裂解制氢的反应机理

基于密度泛函理论(DFT), 研究了甲醇在Pd(111)面上首先发生O—H键断裂的反应历程(CH3OH(s)→CH3O(s)+H(s)→CH2O(s)+2H(s)→CHO(s)+3H(s)→CO(s)+4H(s)). 优化了裂解过程中各反应物、中间体、过渡态和产物的几何构型, 获得了反应路径上各物种的吸附能及各基元反应的活化能数据. 另外, 对甲醇发生C—O键断裂生成CH3(s)和OH(s)的分解过程也进行了模拟计算. 计算结果表明, O—H键的断裂(活化能为103.1 kJ·mol-1)比C—O键的断裂(活化能为249.3 kJ·mol-1)更容易; 甲醇在Pd(111)面上裂解的主要反应历程是: 甲醇首先发生O—H键的断裂, 生成甲氧基中间体(CH3O(s)), 然后甲氧基中间体再逐步脱氢生成CO(s)和H(s). 甲醇发生O—H键断裂的活化能为103.1 kJ·mol-1, 甲氧基上脱氢的活化能为106.7 kJ·mol-1, 两者均有可能是整个裂解反应的速控步骤.     

甲醇氧化羰基化反应中CO和CH3O在CuCl（111）表面上吸附作用的理论研究

基于密度泛函理论方法,采用广义梯度近似方法结合周期平板模型,对甲醇氧化羰基化反应中CuCl(111)表面上CO和CH3O的吸附、共吸附及CH3OCO的吸附进行了系统研究,探讨了CO和CH3O反应生成CH3OCO以及CH3OCO和CH3O反应生成碳酸二甲酯(DMC)的动力学特性.计算结果表明,在CuCl(111)表面的共吸附体系中,CO和CH3O之间的相互作用力比自由态的CO和CH3O之间的作用力大;CO和CH3O反应生成CH3OCO为整个甲醇氧化羰基化反应的速控步骤,活化能为113.19 kJ/mol,计算结果与实验结果一致.     

银催化剂上丁二烯环氧化宏观反应动力学的研究

考察了在Ba-Cs-Cl-Ag/α-Al2O3上以空气为氧化剂的丁二烯气相环氧化反应条件对催化剂性能的影响.宏观动力学实验结果表明,依据Langmuir-Hinselwood机理推测的动力学表达式与实验结果吻合较好,幂函数型的动力学表达式给出了在低丁二烯分压下,丁二烯的反应级数为1.9,O2的反应级数为1.1.丁二烯转化、生成乙烯基环氧乙烷及生成CO2的表观活化能分别为55.4 kJ/mol、 54.8 kJ/mol和64.6 kJ/mol.     

HNCO+OH-→NH2+CO2反应理论研究

用从头算UHF/6-31G基组研究了异氰酸和羟基生成氨基和二氧化碳即HNCO+OH→NH2+CO2的反应机理.优化得到了反应途径上的过渡态和中间体,并通过振动分析对过渡态和中间体进行了确认.在UMP4/6-31G水平上计算了它们的能量,同时对零点能进行了较正.计算结果表明:此反应是多步反应,先后通过3个过渡态(TS1,TS2,TS3),2个内旋转位垒(PSI,TSII),4个中间体(IM1,IM2,IM3,IM4),其中,IM3→TS2这一步为整个反应的决速步骤,速控步的活化能为202.388lJ/mol.与异氰酸和羟基作用的另一反应通道(即HNCO+OH→H2O+NCO)的活化能(69.038kJ/mol)比较,可看出所研究反应通道为次要反应通道,这与实验结果是一致的.     

Rh-CeO2催化剂表面CO还原NO反应中羟基介导NH3生成问题的探讨

CO催化还原NO是发生在汽车尾气净化催化剂中的一个重要化学反应.CeO2容易发生氧化还原反应CeO2?CeO2?x+(x/2)O2而具有氧储存/释放作用,可以有效地促进CO氧化,因而CeO2作为储氧材料和催化助剂被广泛应用于汽车催化剂中.在过渡金属元素中,铑对NO的解离活性最高,是目前汽车三效催化剂中最为重要的还原性活性组分.目前,有关Rh-CeO2基催化剂表面CO还原NO的文献仅关注催化反应活性和N2O选择性,对CO还原NO反应机理的理解还不够深入准确,无法为轻型汽油车NH3排放控制提供正确有用的理论基础.NH3排放至大气中会以NH4+形式与SO42?和NO3?离子结合,导致二次颗粒物污染,因此,研究CO还原NO反应中NH3生成机理对轻型汽油车NH3排放控制具有非常重要的理论意义.我们研究组强调了CO催化还原NO反应的表面羟基介导NH3生成问题,并通过原位漫反射傅里叶变换红外光谱(in-situ DRIFTS),傅里叶变换红外光谱(FT-IR),程序升温还原/氧化(TPR/TPO)等现代分析表征技术深入研究了CO还原NO反应机理,并首次提出了催化剂表面"羟基脱氢"反应的NH3生成机理.研究发现,Rh-CeO2催化剂表面CO还原NO反应的NH3选择性最高可达9.7%,其反应表观活化能仅为36 kJ/mol,in-situ DRIFTS,FT-IR和NO-TPO测试结果表明,NH3的生成可归因于催化剂表面"羟基脱氢"反应,即CO与催化剂表面端位羟基和桥式羟基发生"水煤气转化"反应生成H2,反应产生的H2还原NO生成NH3;CeO2中非骨架铈双羟基化形成的类氢氧化铈物种则会直接与NO发生脱氢反应生成NH3,但需要更高的反应温度.值得注意的是,当反应气中额外通入5%水蒸气时,其反应表观活化能提高了21 kJ/mol(同比增加58.3%),更重要的是NH3选择性明显提高,最高可达25.3%(同比增加160.8%),FT-IR测试结果表明,这是由于水蒸气作用促使催化剂表面羟基化,表面活性氢源得以不断补充.这从动力学角度促进了端位羟基和桥式羟基的"水煤气转化"反应而提高NH3选择性.同时,对比NO/H2,CO/NO和CO/NO/H2O反应的NH3生成浓度,我们还发现,H2O分子与NO的竞争吸附会抑制未解离吸附的NH3进一步还原NO,减少反应生成NH3的消耗,促使更多生成的NH3从催化剂表面脱附至气相中,这也是水蒸气导致NH3选择性明显增加的重要原因.以上结果清晰地表明了催化剂表面"羟基脱氢"作用和水蒸气分子与NO的竞争吸附行为对CO还原NO反应中NH3生成的重要影响.     

Characteristic negative ion fragmentations of deprotonated peptides containing post-translational modifications: mono-phosphorylated Ser, Thr and Tyr. A joint experimental and theoretical study

Peptides and proteins may contain post-translationally modified phosphorylated amino acid residues, in particular phosphorylated serine (pSer), threonine (pThr) and tyrosine (pTyr). Following earlier work by Lehmann et al., the [M-H]- anions of peptides containing pSer and pThr functionality show loss of the elements of H3PO4. This process, illustrated for Ser (and using a model system), is CH3CONH-C(CH2OPO3H2)CONHCH(3) --> [CH3CONHC(==CH2)CONHCH3 (-OPO3H2)] (a) --> [CH3CONHC(==CH2)CONHCH3-H]- + H3PO4, a process endothermic by 83 kJ mol(-1) at the MP2/6-31++G(d,p)//HF/6-31++G(d,p) level of theory. In addition, intermediate (a) may decompose to yield CH3CONHC(==CH2)CONHCH3 + H2PO4 - in a process exothermic by 3 kJ mol(-1). The barrier to the transition state for these two processes is 49 kJ mol(-1). Characteristic cleavages of pSer and pThr are more energetically favourable than the negative ion backbone cleavages of peptides described previously. In contrast, loss of HPO3 from [M-H]- is characteristic of pTyr. The cleavage [NH2CH(CH2-C6H4-OPO3H-)CO2H] --> [NH2C(CH2-C6H4-O-)CO2H (HPO3)] (b) --> NH2CH(CH2-C6H4-O-)CO2H + HPO3 is endothermic by 318 kJ mol(-1) at the HF/6-31+G(d)//AM1 level of theory. In addition, intermediate (b) also yields NH2CH(CH2-C6H4-OH)CO2H + PO3 - (reaction endothermic by 137 kJ mol(-1)). The two negative ion cleavages of pTyr have a barrier to the transition state of 198 kJ mol(-1) (at the HF/6-31+G(d)//AM1 level of theory) comparable with those already reported for negative ion backbone cleavages.     

A temperature-dependent relative-rate study of the OH initiated oxidation of n-butane: the kinetics of the reactions of the 1- and 2-butoxy radicals

The kinetics of the reactions of 1-and 2-butoxy radicals have been studied using a slow-flow photochemical reactor with GC-FID detection of reactants and products. Branching ratios between decomposition, CH3CH(O*)CH2CH3 --> CH3CHO + C2H5, reaction (7), and reaction with oxygen, CH3CH(O*)CH2CH3+ O2 --> CH3C(O)C2H5+ HO2, reaction (6), for the 2-butoxy radical and between isomerization, CH3CH2CH2CH2O* --> CH2CH2CH2CH2OH, reaction (9), and reaction with oxygen, CH3CH2CH2CH2O* + O2 --> C3H7CHO + HO2, reaction (8), for the 1-butoxy radical were measured as a function of oxygen concentration at atmospheric pressure over the temperature range 250-318 K. Evidence for the formation of a small fraction of chemically activated alkoxy radicals generated from the photolysis of alkyl nitrite precursors and from the exothermic reaction of 2-butyl peroxy radicals with NO was observed. The temperature dependence of the rate constant ratios for a thermalized system is given by k7/k6= 5.4 x 10(26) exp[(-47.4 +/- 2.8 kJ mol(-1))/RT] molecule cm(-3) and k9/k8= 1.98 x 10(23) exp[(-22.6 +/- 3.9 kJ mol(-1))/RT] molecule cm(-3). The results agree well with the available experimental literature data at ambient temperature but the temperature dependence of the rate constant ratios is weaker than in current recommendations.     

Clusters of hydrated methane sulfonic acid CH3SO3H.(H2O)n (n = 1-5): a theoretical study

Ab initio and density functional methods have been used to examine the structures and energetics of the hydrated clusters of methane sulfonic acid (MSA), CH3SO3H.(H2O)n (n = 1-5). For small clusters with one or two water molecules, the most stable clusters have strong cyclic hydrogen bonds between the proton of OH group in MSA and the water molecules. With three or more water molecules, the proton transfer from MSA to water becomes possible, forming ion-pair structures between CH3SO3- and H3O+ moieties. For MSA.(H2O)3, the energy difference between the most stable ion pair and neutral structures are less than 1 kJ/mol, thus coexistence of neutral and ion-pair isomers are expected. For larger clusters with four and five water molecules, the ion-pair isomers are more stable (>10 kJ/mol) than the neutral ones; thus, proton transfer takes place. The ion-pair clusters can have direct hydrogen bond between CH3SO3- and H3O+ or indirect one through water molecule. For MSA.(H2O)5, the energy difference between ion pairs with direct and indirect hydrogen bonds are less than 1 kJ/mol; namely, the charge separation and acid ionization is energetically possible. The calculated IR spectra of stable isomers of MSA.(H2O)n clusters clearly demonstrate the significant red shift of OH stretching of MSA and hydrogen-bonded OH stretching of water molecules as the size of cluster increases.     

Sequential addition of H2O, CH3OH, and NH3 to Al3O3-: a theoretical study

Photoelectron spectra of two species, Al3O3(H2O)2- and Al3O3(CH3OH)2-, that are produced by the addition of two water or methanol molecules to Al3O3- are interpreted with density-functional geometry optimizations and electron propagator calculations of vertical electron detachment energies. In both cases, there is only one isomer that is responsible for the observed spectral features. A high barrier to the addition of a second molecule may impede the formation of Al3O3N2H6- clusters in an analogous experiment with NH3.     

单分子水对CH_2SH+NO_2反应机理影响的理论研究

在B3LYP/6-311++G(2df,p)水平下对单分子水参与下的CH_2SH+NO_2反应的微观机理进行了研究.为了获得更准确的能量信息,采用HL复合方法和CCSD(T)/aug-ccpvtz方法进行单点能校正.结果表明,加入单分子水后的CH_2SH+NO_2反应体系,共经过10条不同的反应路径,得到6种反应产物.与裸反应(CH_2SH+NO_2)相比,水分子在反应中起到了明显的正催化作用.不仅使生成产物trans-HONO的能垒(-52.84kJ·mol~(-1))降低了176.94kJ·mol~(-1),而且不需经过复杂的重排和异构化过程便可得到产物cis-HONO.在生成产物cis-HONO通道(Path3和Path4)中,活化能垒分别为143.65和126.70kJ·mol~(-1),而其裸反应的活化能垒却高达238.34kJ·mol~(-1).生成HNO_2的通道中(Path5和Path6)活化能垒分别为295.23和-42.19kJ·mol~(-1).其中Path6的无势垒过程使HNO_2也成为该反应的主要产物.另外,单分子水还可通过氢迁移的方式直接参与CH_2SH+NO_2的反应,活化能垒(TS7-TS10)分别为-10.62,151.03,186.22和155.10kJ·mol~(-1).除直接抽氢通道中的(Path8-Path10)外,其余反应通道均为放热反应,在热力学上是可行的.     

Formation of a Criegee intermediate in the low-temperature oxidation of dimethyl sulfoxide

Dimethyl sulfoxide (DMSO) is the major sulfur-containing constituent of the Marine Boundary Layer. It is a significant source of H2SO4 aerosol/particles and methane sulfonic acid via atmospheric oxidation processes, where the mechanism is not established. In this study, several new, low-temperature pathways are revealed in the oxidation of DMSO using CBS-QB3 and G3MP2 multilevel and B3LYP hybrid density functional quantum chemical methods. Unlike analogous hydrocarbon peroxy radicals the chemically activated DMSO peroxy radical, [CH3S(=O)CH2OO*]*, predominantly undergoes simple dissociation to a methylsulfinyl radical CH3S*(=O) and a Criegee intermediate, CH2OO, with the barrier to dissociation 11.3 kcal mol(-1) below the energy of the CH3S(=O)CH2* + O2 reactants. The well depth for addition of O2 to the CH3S(=O)CH2 precursor radical is 29.6 kcal mol(-1) at the CBS-QB3 level of theory. We believe that this reaction may serve an important role in atmospheric photochemical and irradiated biological (oxygen-rich) media where formation of initial radicals is facilitated even at lower temperatures. The Criegee intermediate (carbonyl oxide, peroxymethylene) and sulfinyl radical can further decompose, resulting in additional chain branching. A second reaction channel important for oxidation processes includes formation (via intramolecular H atom transfer) and further decomposition of hydroperoxide methylsulfoxide radical, *CH2S(=O)CH2OOH over a low barrier of activation. The initial H-transfer reaction is similar and common in analogous hydrocarbon radical + O2 reactions; but the subsequent very low (3-6 kcal mol(-1)) barrier (14 kcal mol(-1) below the initial reagents) to beta-scission products is not common in HC systems. The low energy reaction of the hydroperoxide radical is a beta-scission elimination of *CH2S(=O)CH2OOH into the CH2=S=O + CH2O + *OH product set. This beta-scission barrier is low, because of the delocalization of the *CH2 radical center through the -S(=O) group, to the -CH2OOH fragment in the transition state structure. The hydroperoxide methylsulfoxide radical can also decompose via a second reaction channel of intramolecular OH migration, yielding formaldehyde and a sulfur-centered hydroxymethylsulfinyl radical HOCH2S*(=O). The barrier of activation relative to initial reagents is 4.2 kcal mol(-1). Heats of formation for DMSO, DMSO carbon-centered radical and Criegee intermediate are evaluated at 298 K as -35.97 +/- 0.05, 13.0 +/- 0.2 and 25.3 +/- 0.7 kcal mol(-1) respectively using isodesmic reaction analysis. The [CH3S*(=O) + CH2OO] product set is shown to form a van der Waals complex that results in O-atom transfer reaction and the formation of new products CH3SO2* radical and CH2O. Proper orientation of the Criegee intermediate and methylsulfinyl radical, as a pre-stabilized pre-reaction complex, assist the process. The DMSO radical reaction is also compared to that of acetonyl radical.     

The OH* + CH3SH reaction: support for an addition-elimination mechanism from ab initio calculations

Several intermediates for the CH(3)SH + OH(*) --> CH(3)S(*) + H(2)O reaction were identified using MP2(full) 6-311+g(2df,p) ab initio calculations. An adduct, CH(3)S(H)OH(*), I, with electronic energy 13.63 kJ mol(-1) lower than the reactants, and a transition state, II(double dagger), located 5.14 kJ mol(-1) above I, are identified as the entrance channel for an addition-elimination reaction mechanism. After adding zero-point and thermal energies, DeltaH(r,298) ( degrees )(reactants --> I) = -4.85 kJ mol(-1) and DeltaH(298) (double dagger)(I --> II(double dagger)) = +0.10 kJ mol(-1), which indicates that the potential energy surface is broad and flat near the transition state. The calculated imaginary vibrational frequency of the transition state, 62i cm(-1), is also consistent with an addition-elimination mechanism. These calculations are consistent with experimental observations of the OH(*) + CH(3)SH reaction that favored an addition-elimination mechanism rather than direct hydrogen atom abstraction. An alternative reaction, CH(3)SH + OH(*) --> CH(3)SOH + H(*), with DeltaH(r,298) ( degrees ) = +56.94 kJ mol(-1) was also studied, leading to a determination of DeltaH(f,298) ( degrees )(CH(3)SOH) = -149.8 kJ mol(-1).     

氟丙烯在高温下的热稳定性

用单脉冲激波管研究了全氟丙烯C3F6的分解。使用H2作为清扫剂。产物包括 CH4、 C2F4、 CF3H和C2F3H,作为对断键反应过程的指示。C3F6的断键反应为 C3F6  CF3+C2F3 （1） 得到其速率常数表达式为 k（C3F6  CF3+C2F3)=10(17.4±0.2)exp-(355300±8360)/(RT) s-1 温度范围为1090 K相似文献   

氨和甲醇团簇中的质子转移反应

应用激光多光子电离质谱和分子束技术研究了氨和甲醇二元团簇,实验观测到两个系列质子化的团簇离子: (CH3OH)nH+和(CH3OH)nNH4+(1≤n≤14 ),其产生是经过二元团簇内的质子转移反应。同时也研究了氘代甲醇CH3OD和氨混合团簇,结果表明OD原子团中的D转移概率比CH3原子团中的质子转移概率大几倍。在HF/STO-3G和MP2/6-31G*　*水平上对氨和甲醇二元团簇进行了计算,结果表明与CH3相比OH中的质子转移更加容易,因为CH3中的质子转移过程要克服高度约120 kJ/mol的能垒。