分散固相萃取/气相色谱-串联质谱法分析土壤及沉积物样品中的8种紫外线吸收剂

建立了分散固相萃取结合气相色谱-串联质谱测定土壤及沉积物中8种紫外线吸收剂的分析方法,并优化了提取溶剂、提取时间及净化吸附剂等参数。5.0 g样品中加入20 mL正己烷-丙酮(体积比4∶1)及1.0 g SCX净化吸附剂后振荡提取30 min,提取液经浓缩后,采用气相色谱-串联质谱法测定,外标法定量。结果表明,8种紫外线吸收剂在2～150μg/mL质量浓度范围内线性良好,相关系数不小于0.994 7,方法检出限为0.077～0.226 ng/g,在3个加标水平下的平均回收率为95.7%～126%,相对标准偏差(n=8)不大于12%。采用该方法对实际土壤及沉积物样品进行检测,发现UV-328检出率最高。该方法简单、定性定量准确、检出限低,适用于不同类型土壤及沉积物样品中紫外线稳定剂的检测。     

气相色谱/质谱法检测灰尘、土壤和沉积物中有机磷酸酯

本研究对实验过程中可能存在的污染源进行了定性筛查,采用不同的质控措施以降低实验过程中的背景污染。在严格的质控措施下研究了不同净化方法对样品中有机磷酸酯(OPEs)的净化效果,建立了气相色谱/质谱联用(GC/MS)检测灰尘、土壤和沉积物中7种主要OPEs的分析方法。以正己烷-二氯甲烷(1∶1,V/V)混合溶剂超声提取灰尘样品,以正己烷-丙酮(1∶1,V/V)索氏抽提土壤和沉积物样品中的待测组分,灰尘样品经一步固相萃取柱净化,土壤和沉积物样品经两步串联固相萃取柱联合净化后采用气相色谱/质谱进行定量。结果表明:采用上述净化手段,实验过程省时省力,基质去除率高,7种OPEs的回收率可稳定在67%以上。在高、低2个添加浓度水平下,不同基质样品(灰尘、土壤)中平均回收率为67.9%~117.4%;仪器检出限(LOD)为2.5~25.8μg/L,方法定量限(LOQ)分别为1.4~15.7 ng/g(灰尘)和0.3~2.9 ng/g(土壤)。采用此方法检测6份实际样品(包括2份灰尘样品、2份土壤样品、2份沉积物样品),OPEs在所有样品中均有检出,其浓度范围分别在1313~1988 ng/g、29.9~32.0 ng/g和682~739 ng/g之间。     

沉积物中氯化石蜡与多氯联苯的分离及气相色谱-质谱检测

建立了沉积物中氯化石蜡(CPs)和多氯联苯(PCBs)的提取、分离和检测方法。沉积物样品用二氯甲烷索氏抽提,采用弗罗里硅土/硅胶复合柱纯化和分离。先用80 mL正己烷淋洗得到PCBs组分,再用60 mL二氯甲烷淋洗得到CPs组分,从而实现两者的有效分离。以气相色谱-低分辨质谱(负离子化学源)-选择离子监测技术测定CPs组分,气相色谱-质谱(电子轰击源)-选择离子监测技术测定PCBs,内标法定量,并对样品前处理条件和色谱质谱条件进行优化。在优化条件下,目标化合物(工业品CP52和22种PCB单体)的回收率为86%～99%,RSD<10%。24种短链氯化石蜡(SCCPs)和24种中链氯化石蜡(MCCPs)的方法检出限分别为0.144～3.47 ng/g和0.530～2.24 ng/g。PCBs(一氯～七氯)的方法检出限为0.220～1.08 ng/g。应用该方法检测了东江6个沉积物中CPs和PCBs的含量,沉积物样品中SCCPs的含量为0.245～1.58μg/g(干重),MCCPs的含量为0.538～1.83μg/g,PCBs的含量为1～100 ng/g。     

土壤与沉积物样品中多氯联苯总量的气相色谱-质谱法快速分析

建立了土壤和沉积物样品中多氯联苯总量的快速分析方法.样品经加速溶剂萃取,Bond ElutPCB SPE小柱净化后,采用气相色谱-质谱测定多氯联苯的总量,方法的平均回收率为84% ～106%,相对标准偏差为4.2% ～8.4%,多氯联苯总量的方法检出限为2.25 ng/g.该方法快速、灵敏、准确,适用于大部分土壤及沉积物样品中多氯联苯总量的快速筛查分析.     

超高效液相色谱-串联质谱多目标分析沉积物中的微量有机紫外线吸收剂

利用超声波辅助萃取、通过硅胶柱层析法净化,联合超高效液相色谱-串联质谱技术建立了同时检测沉积物中12种微量有机紫外线吸收剂的定性定量方法.优化了萃取条件,比较了净化过程中硅胶活化温度、洗脱剂种类和体积对回收率的影响.样品在甲醇中经超声波辅助萃取3次,每次15 min;硅胶活化温度为160 ℃,洗脱剂为甲醇/二氯甲烷混合液(1∶1,V/V);质谱采用大气压力化学电离源正离子模式,数据采集为选择反应监测模式.目标物的回收率为55％～118％,方法定量限为1～ 250 pg/g,有效控制了基质干扰.采用本方法初步分析了珠江广州城市河段表层沉积物中的有机紫外线吸收剂,除UV-327外,其它目标物均被检出,含量最高可达12.0 ng/g(干重).     

气相色谱-质谱法检测涂料中4种苯并三唑类紫外线吸收剂

采用气相色谱-质谱技术对涂料中4种高关注苯并三唑类紫外线吸收剂的含量进行测定。样品风干成膜后以正己烷或乙腈为溶剂进行超声提取,DB-5MS色谱柱(30 m×0.25 mm×0.25μm)分离,SCAN模式进行分析检测。4种苯并三唑类紫外线吸收剂质量浓度在0.5~50μg/m L范围内与峰面积呈线性关系。方法定量下限(S/N=10)为10 mg/kg。加标回收率为84.3%~100.4%,相对标准偏差(RSD,n=6)不大于8.9%。方法适用于涂料中高关注苯并三唑类紫外线吸收剂的日常分析检测。     

加速溶剂萃取-气相色谱串联质谱法检测沉积物中痕量增塑剂

研究了加速溶剂萃取(ASE)对沉积物中邻苯二甲酸酯类(PAEs)物质的提取效果,建立了快速溶剂萃取/气相色谱-质谱联用(GC/MS)检测沉积物中16种邻苯二甲酸酯类物质的方法。用正己烷和二氯甲烷混合溶剂作为提取溶剂,加速溶剂萃取法萃取沉积物中16种PAEs,再用Florisil层析柱净化,最后用GC/MS对净化后提取液中的PAEs进行定量分析。结果表明:当萃取剂为二氯甲烷-正己烷(1∶1,V/V),萃取温度为80℃时,萃取效率最高,16种PAEs的回收率稳定在81.2%～128.5%之间,相关系数≥0.99,检出限为0.12～0.98 ng/g,相对标准偏差为1.1%～10.8%。加速溶剂萃取法与传统索氏提取法相比,既提高了萃取效率同时又减少了有机萃取溶剂的用量。在检测实际样品时,同时加入3种内标指示剂对方法的性能进行了验证,3种内标的回收率分别为106.0%±18.8%,87.4%±10.8%和81.4%±14.5%,样品中16种PAEs的检出率为100%。前处理方法处理简单,定性与定量分析准确可靠。     

加速溶剂萃取-硅胶柱净化-碱性氧化铝柱分离-气相色谱三重四极杆质谱法测定土壤中的二噁英类化合物

建立了加速溶剂萃取(ASE),酸性硅胶柱、复合硅胶柱及碱性氧化铝柱纯化分离,气相色谱-三重四极杆质谱测定土壤中二噁英/呋喃(PCDD/Fs)、多氯联苯(PCBs)、多氯萘(PCNs)的分析方法.选用正己烷-二氯甲烷(50∶50, V/V)作为ASE的提取溶剂,设定提取温度为120℃,加标回收实验表明本方法可行.用100 mL正己烷-二氯甲烷(95∶5, V/V)及50 mL正己烷-二氯甲烷(50∶50, V/V)依次淋洗碱性氧化铝柱,得到组分A(PCBs及PCNs)与组分B(PCDD/Fs),实现了PCDD/Fs与另外两种化合物的分离,排除了同系物间及其它杂质的干扰.使用同位素稀释-气相色谱三重四极杆质谱法(GC-MS/MS), 在选择反应监测(Selected reaction monitoring, SRM)模式下测定PCDD/Fs、PCBs和PCNs,3种化合物的仪器检出限(LOD)范围分别为0.04~0.25 μg/L, 0.10~0.20 μg/L和0.01~0.05 μg/L,目标物平均相对响应因子(RRF)的相对标准偏差(RSD)均小于13%.基质土加标实验中,3种化合物13C标记的同位素内标回收率的范围分别为50%~95%,51%~103%, 49%~74%.实际样品的分析结果表明,PCDD/Fs、PCBs及PCNs在土壤样品中的总含量范围分别为16.1~1148 pg/g、6.6~152.6 pg/g及10.9~99.5 pg/g,且样品测定结果与高分辨质谱测定结果相吻合.     

HPLC-MS法分析海洋沉积物中的全氟化合物

建立了海洋沉积物中17种全氟化合物的高效液相色谱-串联质谱分析方法。采用Na OH-甲醇提取样品,并用HLB固相萃取柱对样品进行富集净化,然后用甲醇进行洗脱,洗脱液氮气浓缩,甲醇定容后,采用Waters SymmetryC18色谱柱(150 mm×2.1 mm,3.5μm)分离,电喷雾负离子多反应监测(MRM)模式检测。在最佳实验条件下,17种化合物的体积分数在0.1~50 ng/m L范围内呈线性(r0.9902),加标回收率在67.37%~111.4%之间,相对标准偏差为0.39%~6.4%,检出限为0.03~0.05 ng/g。将方法应用于莱州湾海洋沉积物中目标物的检测,11个站位点中17种化合物均有检出。     

固相微萃取和气质联用分析测定土壤中13种挥发性芳香烃

建立了固相微萃取(SPME)-气相色谱质谱法(GC-MS)测定土壤中13种挥发性芳香烃的方法.用SPME萃取土壤中的挥发性芳香烃,利用安捷伦5977A气相色谱-质谱进行分离检测,选用土壤基质修改液提高了目标化合物的回收率.13种芳香烃组分在5.0、10、20、40、50μg/kg土壤中质量浓度范围内呈线性关系,相关系数r2大于0.995,方法检测限小于1.0μg/kg,完全满足检测要求.     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Preparation and photolysis of poly-p-ethylacrylophenone and poly-p-chloroacrylophenone and their copolymers with styrene and methyl methacrylate

Poly-p-ethylacrylophenone (PPEtAP) and poly-p-chloroacrylophenone (PPClAP) and their copolymers with styrene (PEtAP/S) and (PClAP/S) and with methyl methacrylate (PEtAP/MMA) and (PClAP/MMA) were prepared. Quantum yields of main-chain scissions at 366 nm at room temperature in benzene solution are of the same order as those of the unsubstituted polyacrylophenone and its copolymers. Substitution with chlorine and ethyl group in the para position compared to the unsubstituted polyacrylophenone and its copolymers leads to an increase of the lifetime for the n–π^* excited triplet state, as is evident from the measured quenching constants of photolysis. The low-temperature emission spectra of the copolymers are similar to the spectra of the model compounds in a polymer film. For the homopolymer, however, the character of the emission spectrum changes considerably.