Rates of transport through a capsule membrane to attain Donnan equilibrium

The swelling of a capsule consisting of salt solution and polyelectrolyte, surrounded by a membrane, is studied. The membrane allows salt and water to pass, but is impermeable to polyelectrolyte molecules. Equilibrium swelling of the capsule is governed by Donnan equilibrium. Transport rates of a salt and water through the membrane are expressed in terms of a Darcy permeability and a salt diffusivity. The governing equations predict that the rate at which equilibrium is attained as the external salt concentration varies is controlled by the timescale for diffusion of salt, rather than by that for Darcy flow. Experiments were performed using capsules with membranes made of covalently linked HSA and alginate. The capsule volume varied with a single relaxation rate when the external salt concentration was changed, as predicted by theory. This constitutes the first step toward a simple method for determining the membrane properties of capsules by measuring rates of change of capsule volume.     

Salt water bathing prior to UVB irradiation leads to a decrease of the minimal erythema dose and an increased erythema index without affecting skin pigmentation

The combination of salt water baths and solar radiation is known as an effective treatment for patients with psoriasis and atopic dermatitis. To determine whether increased susceptibility to UVB radiation may contribute to this therapeutic effect we have studied the effect of bathing the skin in salt water prior to UVB irradiation. Twelve subjects were phototested on the volar aspects of their forearms with increasing doses of UVB radiation. One forearm was exposed to 5% salt water prior to irradiation. The minimal erythema dose (MED) was determined and the erythema index and skin pigmentation were assessed by photometric measurement. The combination of salt water bath and irradiation yielded a significant decrease of the MED when compared to UVB alone (median 90 mJ/cm2 vs 130 mJ/cm2, P < 0.01). Analysis of variance showed a significant influence of salt water bath on erythema (P < 0.05) but not on skin pigmentation. Within the MED test area the erythema index of the salt water exposed forearms was elevated significantly (P < 0.05) while skin pigmentation was not affected. Thus, bathing the skin in salt water leads to a decreased threshold level for the elicitation of UVB-induced erythema and a selective increase of the erythemal response. This sensitization to the effects of shortwave UVB radiation may increase immunosuppressive effects of UVB radiation and may lead to an increased efficacy of UVB phototherapy. However, there is also an increased sunburn risk when salt water baths are followed by exposure to UV radiation.     

碘盐的质量及如何补碘

食用加碘盐是补碘最为简单和广泛的方法,报道了广州市近几年来市售碘盐的质量情况,并进行了模拟烹调过程碘盐中碘损失的试验。以提高人们对补磺重要性的认识。介绍正确使用碘盐碘的方法。     

A radioactive tracer dilution method to determine the mass of molten salt

A new technique for molten salt mass determination, termed radioactive tracer dilution, that uses ²²Na as a tracer was validated at bench scale. It has been a challenging problem to determine the mass of molten salt in irregularly shaped containers, where a highly radioactive, high-temperature molten salt was used to process nuclear spent/used fuel during electrochemical recycling (pyro-processing) or for coolant/fuel salt from molten salt reactors. A radioactive source with known activity is dissolved into the salt. After a complete mixture, a small amount of the salt is sampled and measured in terms of its mass and radioactivity. By finding the ratio of the mass to radioactivity, the unknown salt mass in the original container can be precisely determined.

     

From BN-Naphthalenes to Benzoborole Dianions

The synthesis of benzoborole dianions by alkali metal reduction of BN-naphthalene derivatives via a ring-contraction strategy has been developed. Reduction of 1-alkynyl 2,1-benzazaborine 1 a in Et₂O led to the elimination of alkynyllithium with the formation of 1-amino-1-benzoborole trilithium salt 2 a , whereas reduction of 1-phenyl 2,1-benzazaborine 1 c in THF yielded 1-phenyl-1-benzoborole dilithium salt 2 c with the elimination of ArNHLi. The trilithium and dilithium salts 2 a and 2 c have been fully characterized. Treatment of trilithium salt 2 a with Et₃NHCl led to the selective protonation of the amino lithium to afford the dilithium salt 2 aH , which could be cleanly oxidized to 1-amino-1-benzoborole 3 in an excellent yield. Reaction of 1-phenyl-1-benzoborole dilithium salt 2 c with MeI yielded the lithium borate 4 c , which is luminescent both in solution and in the solid state.     

A general and efficient five-step one-pot procedure leading to nitrogen-bridgehead heterocycles containing an imidazole ring

A very simple annulation reaction was designed, allowing an imidazole moiety to be fused onto a range of pyridine-based derivatives. The methodology consists of an activation step via the formation of a pyridinium salt to increase the electrophilicity of the pyridine ring, followed by a cascade reaction triggered by a nucleophilic attack of the iminium moiety. Depending on the pyridinium salt, it is possible to obtain functionalized imidazole moieties.     

Mechanistic study of asymmetric Michael addition of malonates to enones catalyzed by a primary amino acid lithium salt

A mechanistic study was carried out for the asymmetric Michael addition reaction of malonates to enones catalyzed by a primary amino acid lithium salt to elucidate the origin of the asymmetric induction. A primary β-amino acid salt catalyst, O-TBDPS β-homoserine lithium salt, exhibited much higher enantioselectivity than that achieved with the corresponding catalysts derived from α- and γ-amino acids for this reaction. Detailed studies of the transition states with DFT calculations revealed that the lithium cation and carboxylate group of the β-amino acid salt catalyst have important roles in achieving high enantioselectivity in the Michael addition reaction of malonates to enones.     

Lamellar to inverted hexagonal mesophase transition in DNA complexes with calamitic, discotic, and cubic shaped cationic lipids

In this study, we report on the lipid tail molecular shape/size effect on the mesophase self-assembly behaviors of various cationic lipids complexed with double-stranded DNA. The molecular shape of the cationic lipids was tailored from rodlike (a cyanobiphenyl imidazolium salt) to discotic (a triphenylene imidazolium salt), and finally to cubic [a polyhedral oligomeric silsesquioxane (POSS) imidazolium salt]. An increase in the cross-sectional area of the hydrophobic tails with respect to the hydrophilic imidazolium head induced a negative spontaneous curvature of the cationic lipids. As a result, a morphological change from lamello-columnar (L(C)(alpha)) phase for the DNA-cyanobiphenyl imidazolium salt (DNA-rod) and DNA-triphenylene imidazolium salt (DNA-disk) complexes to an inverted hexagonal columnar (H(C)(II)) phase for the DNA-POSS imidazolium salt (DNA-cube) complex was observed. The DNA-rod complex had a typical smectic A (SmA) L(C)(alpha) morphology, whereas the DNA-disk complex had a double lamello-columnar liquid crystalline phase. However, when the lipid tail changed to POSS, an H(C)(II) morphology was achieved. These morphological changes were successfully characterized by X-ray diffraction and transmission electron microscopy. We expect that these liquid crystalline and crystalline DNA hybrid materials may become potential functional materials for various applications such as organic microelectronics and gene transfection.     

Separation of adhered salt from uranium deposits generated in electro-refiner

It is important to increase a throughput of the salt removal process from uranium deposits which is generated on the solid cathode of electro-refiner in pyroprocess. In this study, it was proposed to increase the throughput of the salt removal process by the separation of the liquid salt prior to the distillation of the LiCl?CKCl eutectic salt from the uranium deposits. The feasibility of liquid salt separation was examined by salt separation experiments on a stainless steel sieve. It was found that the amount of salt to be distilled could be reduced by the liquid salt separation prior to the salt distillation. The residual salt remained in the deposits after the liquid salt separation was successfully removed further by the vacuum distillation. It was concluded that the combination of a liquid salt separation and a vacuum distillation is an effective route for the achievement of a high throughput performance in the salt separation process.     

乙二醇-磷霉素改性氧化锆色谱固定相的制备及其在蛋白质分离中的应用

合成了分离蛋白质的乙二醇-磷霉素钠改性氧化锆高效液相色谱固定相, 通过漫反射红外光谱、元素分析等分析方法对该固定相进行了表征. 以溶菌酶、核糖核酸酶A、细胞色素C和糜蛋白酶四种标准碱性蛋白质为探针, 系统地考察了固定相的疏水相互作用色谱性能. 结果表明, 乙二醇-磷霉素改性氧化锆固定相对蛋白质有一定的保留, 表现出较高的分离选择性.     

Access to Nitriles from Aldehydes Mediated by an Oxoammonium Salt

A scalable, high yielding, rapid route to access an array of nitriles from aldehydes mediated by an oxoammonium salt (4‐acetylamino‐2,2,6,6‐tetramethylpiperidine‐1‐oxoammonium tetrafluoroborate) and hexamethyldisilazane (HMDS) as an ammonia surrogate has been developed. The reaction likely involves two distinct chemical transformations: reversible silyl‐imine formation between HMDS and an aldehyde, followed by oxidation mediated by the oxoammonium salt and desilylation to furnish a nitrile. The spent oxidant can be easily recovered and used to regenerate the oxoammonium salt oxidant.     

A Novel Method for Stabilizing Zein Gel Particles to Salt Ion-Induced Aggregation

The destabilization of zein gel particles by salt ions seriously limits their practical application. In this study, zein gel particles exhibiting excellent stability to salt ions were developed by grafting gum arabic with tannic acid. Gum arabic (GA) was first coated onto the surface of zein gel particles, followed by addition of tannic acid to further reinforce non-covalent cross-linking between GA and the zein gel particle surface. The stability of the gel particle dispersions was characterized by Turbiscan analysis, gel particle diameter changes and visual inspection of phase separation. The tannic acid-treated zein–GA gel particles were highly protected from precipitation or aggregation in the presence of NaCl (0–3 mol/L) at different pH values (4.0, 7.0 or 8.5). The gel particles prepared in this study will therefore have broader applicability in different pH and salt ions ion environments.     

N-heterocyclic carbenes: Reaction to give anilines

The attempted synthesis of bis(NHC)palladium complexes via the direct reaction of an imidazolium salt with palladium acetate results in the formation of a mixed NHC/aniline complex. The route by which the aniline is formed has not been completely elucidated, but it does originally derive from an imidazolium salt.     

A microscale approach for predicting the performance of chromatography columns used to recover therapeutic polyclonal antibodies

A microscale approach is described which screens conditions for recovering polyclonal antibodies from ovine sera by mixed-mode cation-exchange chromatography. The impact of pH and loading buffer salt concentration were assessed using robotically operated 20 μL packed pipette tips. Low salt concentrations delivered capacities up to 41 mg/mL, while only half this level was obtained at high salt concentrations. Two of the screened conditions were then tested in a 10 mL packed bed and overall trends in capacity, yield and purity were found to be retained. Microscale pipette tips thus provided a useful basis for the rapid, approximate definition of a chromatography design space.     

助剂前体ZnSO_4浓度对苯选择加氢制环己烯Ru-Zn催化剂性能的影响

共沉淀法制备了Ru-Zn催化剂,在ZrO_2作分散剂下考察了助剂前体ZnSO_4浓度对苯选择加氢制环己烯Ru-Zn催化剂性能的影响.并用X-射线衍射(XRD)、X-射线荧光光谱(XRF)、N_2-物理吸附、透射电镜(TEM)和X-射线光电子能谱(XPS)等手段对催化剂进行了表征.结果表明,当ZnSO_4前体浓度低于0.10 mol/L时,Ru-Zn催化剂中Zn以ZnO形式存在,在加氢过程中ZnO可以与反应修饰剂ZnSO_4反应生成(Zn( OH)_2)_3(ZnSO_4)(H_2O)_3盐.继续增加ZnSO_4前体浓度,催化剂中Zn以ZnO和NaZn_4(SO_4)(Cl)(OH)_6·6H_2O盐存在,在加氢过程中ZnO和NaZn_4(SO_4)(Cl)(OH)_6·6H_2O盐可以与反应修饰剂ZnSO_4反应生成(Zn( OH)_2)_3(ZnSO_4)(H_2O)_5.(Zn( OH)_2)_3(ZnSO_4)(H_2O)_x(x=3或5)盐的Zn~(2+)可以转移金属Ru的部分电子.因此,随ZnSO_4前体浓度的增加,(Zn( OH)_2)_3(ZnSO_4)(H_2O)_x的量逐渐增加,金属Ru失电子越多,催化剂活性越低,环己烯选择性越高.0.08 mol/L ZnSO_4前体制备Ru-Zn催化剂给出了59.1%的环己烯收率,而且该催化剂具有良好的重复使用性能和稳定性.     

A new approach in modelling phase equilibria and gas solubility in electrolyte solutions and its applications to gas hydrates

This paper presents a new predictive model for phase equilibria and gas solubility calculations in the presence of electrolyte solutions. It treats salts as pseudo-components in an equation of state (EoS) by defining the critical properties and acentric factor for each salt. The water–salt, gas–salt and salt–salt binary interaction parameters (BIP) have been determined by using available experimental data on freezing point depression and boiling point elevation as well as gas solubility and salt solubility data in saline solutions.The methodology has been applied in modelling sodium chloride, potassium chloride and their mixtures, as well as solubility of methane and carbon dioxide in aqueous single and mixed electrolyte solutions.The developed model is capable of accurately predicting the phase behaviour, gas hydrate stability zone and potential salt precipitation in single and mixed electrolyte solutions. The model predictions are compared with available independent experimental data, including hydrate inhibition characteristics of single and mixed electrolyte solutions, and good agreement is demonstrated.     

Crystalline Transformation of Chitosan from Hydrated to Anhydrous Polymorph Via Chitosan Monocarboxylic Acid Salts

ABSTRACT

Spontaneous removal of monocarboxylic (formic, acetic, propionic or butyric) acids accompanying dehydration of the corresponding chitosan salts was observed from X-ray fiber diffraction diagrams obtained during the storage of these salts for a given period of time. The first three salts were prepared by immersing a tendon chitosan (a hydrated crystal) in an aqueous solution of respective monocarboxylic acid and 2-propanol. The salts showed similar fiber patterns not only to one another but also to the “Eight-fold” polymorph of the original chitosan, indicating that they are Type II salts, hydrated crystals, where the backbone chitosan molecule takes up an eight-fold helical conformation. The temperature required for the salt formation depended on the hydrophobicity of the acid, e.g., the chitosan formic acid salt could be prepared at room temperature, whereas, formation of the propionic acid salt was carried out at 4 °C. All the acids spontaneously evaporated accompanied by dehydration during storage of the salts, resulting in formation of anhydrous crystalline chitosan. Removal of the monocarboxylic acids was accelerated by increasing the hydrophobicity of the acid: at 100% relative humidity approximately 3 months for the formic, 1 month for the acetic and 3 weeks for the propionic acid salts. In the case of butyric acid the anhydrous polymorph of chitosan was obtained immediately after the reaction, suggesting that the water removing action of this acid was too fast to detect a Type II salt by the present X-ray method. The anhydrous crystals of chitosan were irreversibly prepared by annealing a hydrated crystal in water at a high temperature, such as 240 °C, leading to a little loss of orientation and to thermal decomposition of the sample specimen to some extent. But it was found that, through Type II salts of monocarboxylic acids, the hydrated crystals of chitosan can be dehydrated even at room temperature without any loss of orientation and decomposition of the chitosan specimen.     

Kinetics and mechanism of biphasic transfer of salted water from an aqueous phase to AOT reverse micelles

The transfer of salted water from an external aqueous phase to AOT reverse micelles is studied in relation with the change of properties from a percolating to a non percolating state of the micelles. A membrane-separated two-compartment cell was used to measure the transfer of salt which was followed by conductivity measurements. We expected a sharp conductivity drop which could have been used as a kind of sensor to detect a threshold of salinity. In fact, this sharp drop was not observed and this is shown to be due to the fact that no excess water is incorporated in the microemulsion phase in these conditions. For this purpose separate analysis of the water and salt incorporated in the microemulsion phase versus time has been performed. Under the conditions used the increase of the salt content is accompanied by a decrease of the water content, even though the initial system was far from being saturated with water. The results are discussed in terms of the different possible mechanisms. Molecular diffusion of water appears to be unlikely and its expulsion can be simply explained by the shrinkage of the microdroplets merging with the interfacial film, this being associated with the electrostatic shielding of the polar head repulsions.     

Controllable gelation of methylcellulose by a salt mixture

The effects of a salt mixture consisting of a salt-out salt (NaCl) and a salt-in salt (NaI) on the sol-gel transition of methylcellulose (MC) in aqueous solution have been studied by means of micro differential scanning calorimetry and rheometry. The salt mixture was found to have a combined effect from the salt-out and salt-in salts in the mixture, and the salt effect was dependent on the water hydration abilities of the component ions and ion concentration. At a fixed total salt concentration, the sol-gel transition temperature nicely followed a rule of mixing: Tp = m1Tp1 + m2Tp2 where Tp, Tp1, and Tp2 are the gelation peak temperatures for the MC solutions with a salt mixture, NaCl, and NaI, respectively, and mi is the molar fraction of the salt component i in the salt mixture. The linear rule of mixing proved that the effects of NaCl and NaI on the sol-gel transition of MC are completely independent. In addition, the presence of a single salt or a salt mixture in a MC solution does not change the essential mechanism of MC gelation. Therefore, the sol-gel transition of MC can be simply controlled by a salt mixture consisting of a salt-out salt and a salt-in salt. The rheological results supported the micro thermal results excellently. But the gel strength of MC containing salts was influenced by both salt type and salt concentration.     

Development of an integrated sieve-crucible assembly for sequential operation of liquid salt separation and vacuum distillation

The solid cathode processing is necessary to separate salt from the cathode product for the preparation of a uranium ingot with a high purity in the pyroprocess. The capacity of a salt distiller should be sufficiently large to reach the throughput of uranium electro-refining process. In this study, an assembly composing a liquid separation sieve and a distillation crucible was developed for the sequential operation of a liquid salt separation and a vacuum distillation in the same tower. The feasibility of the sequential salt separation was examined by the rotation test of the sieve-crucible assembly and sequential operation of a liquid salt separation and a vacuum distillation. The adhered salt in the uranium deposits was removed successfully. The salt content in the deposits was below 0.1 wt% after the sequential operation of the liquid salt separation—salt distillation. From the results of this study, it could be concluded that efficient salt separation can be realized by the sequential operation of liquid salt separation and vacuum distillation in one distillation tower since the operation procedures are simplified and no extra operation of cooling and reheating is necessary.